فهرست مطالب
نشریه شیمی کاربردی روز
پیاپی 33 (زمستان 1393)
- تاریخ انتشار: 1393/12/21
- تعداد عناوین: 9
-
-
اندازه گیری و پیش تغلیظ منگنز در محلول های آبی با استفاده از روش میکرواستخراج مایع - مایع پخشی دماییصفحات 11-20در این تحقیق روش میکرواستخراج مایع – مایع پخشی دمایی با استفاده از مایع یونی جهت پیش تغلیظ مقادیر کم یون منگنز در نمونه های آبی به کار گرفته شده است و از دستگاه اسپکترومتر جذب اتمی شعله برای اندازه گیری جذب نمونه های منگنز استفاده شد. پارامترهای موثر بر کارایی استخراج مانند، pH، غلظت لیگاند، نوع و حجم مایع یونی، سرعت چرخش و زمان سانتریفیوژ مورد بررسی قرار گرفتند. تحت شرایط بهینه حد تشخیص روش و محدوده خطی بودن نمودار کالیبراسیون به ترتیب 2.6 و 126-10 میکروگرم بر لیتر تشخیص داده شد. کارایی روش نیز با اندازه گیری غلظت یون منگنز در نمونه های آبی مختلف مورد بررسی قرار گرفت و نایج بدست آمده کارایی روش را تایید کرد.
کلیدواژگان: میکرواستخراج مایع - مایع پخشی دمایی با استفاده از مایع یونی، یون منگنز، اسپکترومتر جذب اتمی شعله -
صفحات 21-34مشخصه های دیاتومیت طبیعی ایران (بیرجند) از جنبه اجزای شیمیایی، مساحت سطح ویژه، توزیع و حجم منافذ و پراش پرتو ایکس (XRD) مورد مطالعه قرار گرفت. دیاتومیتی که فقط با سولفوریک اسید پالایش شد در مقایسه با نمونه دیاتومیتی که با آب دیونیزه شسته شده بود و نیز نمونه ای که ابتدا با سولفوریک اسید پالایش گردید و سپس در دمای °C 550 به مدت 3 ساعت قرار گرفت؛ دارای مساحت سطح ویژه بیشتر، اندازه و حجم منافذ بزرگتری بود. مساحت سطح ویژه و حجم منافذ به ترتیب 63/ 46% و 40/ 71% افزایش داشت. نتایج، نشان داد که نمونه های دیاتومیت از کریستوبالیت، کوارتز و فلدسپار تشکیل شده بودند. پالایش دیاتومیت با سولفوریک اسید و سپس قرار گرفتن در دمای °C 550 منجر به تغییر در نسبت Si/Al و رشد کریستالیت شد. آزمون های BJH و DFT نشان داد که نمونه های دیاتومیت دارای شبکه ای از منافذ با تخلخل بسیار ریز و میانی (micro/mesopores) هستند و توزیع اندازه منافذ آنها بین 4/ 1 تا 100 نانومتر بود. بر اساس طبقه بندی IUPAC، ایزو ترم دیاتومیت از نوع IV با حلقه پسماند hysteresis loop) H3) بود. انجام پالایش اسیدی به تنهایی بر روی دیاتومیت و یا اصلاح آن با کلسینه کردن در دمای °C 550 پس از پالایش با سولفوریک اسید می تواند آن را به عنوان یک جاذب یا جایگاه تثبیت کاتالیست آماده کند.
کلیدواژگان: دیاتومیت طبیعی ایران، پالایش اسیدی، اندازه کریستالیت، XRD، SEM
-
Pages 11-20In the present work، a simple and rapid technique of thermal dispersive microextraction based on ionic liquid (TDMS-IL) was developed for preconcentration and determination of manganese in aqueous samples prior to analysis by flame atomic absorption spectrometry (FAAS). The effects of different parameters such as، pH and type and volume of ionic liquid، concentration of ligand، rate and time of centrifugation and temperature were studied and optimized. Under the optimum condition the limit of detection and linear rang of the method were 2. 6 and 10-126 µg L-1 respectively. The applied of the proposed method was determined by determination of manganese ion concentration in different water samples.Keywords: Nanoparticles, Zinc oxide, Sol, gel, Ag, doped, Optical properties
-
Pages 21-34The characterizations of natural diatomite from Birjand deposit (Iran) were studied such as chemical compositions، specific surface area، total pore volume، pore size distribution and XRD. The diatomite that was treated only with sulfuric acid displayed a larger surface area، expanded total pore volume and increased pore size in comparison with both washed natural diatomite with deionized water and the diatomite treated with sulfuric acid then calcinated at 550°C. The specific surface area and total pore volume were increased 46. 63% and 71. 40%، respectively. The results showed that the diatomite samples were composed of cristobalite، quartz and feldspar phases. Acid treatment and then calcination at 550°C changed the Si/Al ratio and grew the crystallite size. BJH with DFT analysis showed that the diatomite samples had very disordered micro/mesoporous pore networks. The pore size distribution of the diatomite samples were from 1. 4100 nm. The isotherm of the samples were type IV and showed a long hysteresis loop that resembled the H3 type on the basis of the IUPAC classification. Therefore، the diatomite that was treated only with 3M H2SO4 or treated with sulfuric acid then calcinated at 550°C can be to serve as a catalyst support or an adsorbent.Keywords: Iran natural diatomite, acid treatment, X-ray diffraction, crystallite size determination, scanning electron microscopy