فهرست مطالب

مهندسی برق و مهندسی کامپیوتر ایران - سال دوم شماره 1 (پیاپی 3، بهار و تابستان 1383)

نشریه مهندسی برق و مهندسی کامپیوتر ایران
سال دوم شماره 1 (پیاپی 3، بهار و تابستان 1383)

  • 50 صفحه،
  • تاریخ انتشار: 1383/06/20
  • تعداد عناوین: 8
|
  • سید محمدرضا میرصراف، علی موقررحیم آبادی، محمد حکاک صفحه 3
    در این مقاله برای به روز رسانی موقعیت کاربر متحرک، دو الگوریتم فشرده سازی 78 LZ و الگوریتم فشرده سازی پیشنهادی (78 LZ بهبود یافته) برای شبکه های PCS معرفی شده است. مسائل مربوط به پیاده سازی الگوریتم فشرده سازی، نیاز به حافظه فرهنگ لغات در کاربر متحرک و پایگاه داده HLR و ابهام در آخرین موقعیت کاربر متحرک به دلیل تاخیر در به روز رسانی موقعیت می باشد. حسن استفاده از این الگوریتم کاهش تعداد به روز رسانی موقعیت کاربر متحرک است. با ایجاد تغییراتی در به کارگیری الگوریتم 78 LZ ما توانسته ایم مسائل پیاده سازی الگوریتم را کاهش داده و آن را برای اعمال در شبکه های به روز رسانی فاصله پایه و ارسال نمادهائی متناظر به همسایگی های هر سلول به جای ارسال شناسه سلول در الگوریتم فشرده سازی می باشد. برای مقایسه الگوریتم 78 LZ و الگوریتم 78 LZ بهبود یافته (روش پیشنهادی) از شبیه سازی استفاده شده است. در برنامه شبیه سازی ساختار شبکه دو مدل حرکتی جهت دار و همه جهته استفاده شده است. پارامترهای خروجی برنامه کاهش تعداد به روز رسانی، حداکثر ابهام در موقعیت کاربر و حجم حافظه فرهنگ لغات برای الگوریتم فشرده سازی است پس از مقایسه دو الگوریتم توسط شبیه سازی نتیجه می گیریم ک الگوریتم 78 LZ بهبود یافته از نظر کاهش تعداد به روزرسانی، حداکثر ابهام در موقعیت کاربر و حجم حافظه فرهنگ لغات دارای کارایی بسیار بالاتری نسبت به الگوریتم 78 LZ می باشد. در انتهای هزینه مکان یابی موقعیت کاربر متحرک، بر حسب پارامتر تعداد متوسط مکالمه به متوسط حرکت برای سه الگوریتم به روز رسانی فاصله پایه، کارائی بالاتر الگوریتم 78 LZ را مشخص می کند.
    کلیدواژگان: مخابرات سیار، فراخوانی و به روزرسانی موقعیت، فشرده سازی داده، الگوریتم های 78 LZ و الگوریتم بهبود یافته 78 LZ، الگوریتم به روزرسانی فاصله پایه و پایگاه داده HLR
  • آرش دانا، احمد خادم زاده، محمداسماعیل کلانتری صفحه 15
    تضمین کیفیت سرویسهای بلادرنگ بر روی شبکه های مبتنی بر پروتکلهای اینترنت مستلزم تضمین قابلیت پایداری با توانایی پوشش سریع اشکالات و نتیجتا بازسازی مسیرهای مورد نظر می باشد. حال آنکه استفاده از روش های موجود مسیریابی جهت پوشش اشکال مستلزم صرف زمانی بیش از حد مناسب می باشد. شبکه های مبتنی برMPLS با توجه به خواص ارتباطی مسیرنگر با بکارگیری روش های بازیافت مناسب می توانند متضمن کیفیت سرویسها و زمان مناسب برای رفع اشکالات از سوی شبکه های LP باشند. در این مقاله یک روش بازسازی جدید جهت پشتیبانی از ارتباطات برقرار شده بر چسب دار براساس مسیرهای پشتیبانی از پیش تعیین شده ارائه شده است. در توزیع ترافیک دو مدل خود شبیه و پواسن، بصورت مجزا بکار گرفته شده، نتایج حاصل با هم مقایسه و عملکرد روش به کار گرفته شده با افزایش راندمان شبکه و قابلیت اطمینان تائید گردیده است.
    کلیدواژگان: بازسازی، شبکه های MPLS و کیفیت سرویس
  • محمد سروش، محمدکاظم مروج فرشی، عباس ظریف کار صفحه 24
    مهمترین قسمت گیرنده نوری، بخش آشکار سازی اطلاعات است. بین انواع آشکارسازها، آشکار ساز نوری بهمنی (APD) به دلیل داشتن بهره جریان از اهمیت ویژه ای برخوردار است. در ساختارهای APD - SAM، برای آشکار سازی طول موج های بلند و کاهش جریان تونلی و ولتاژ بایاس، نواحی جذب فوتون و تکثیر حاکل از هم جدا می شوند. با توجه به ساز و کارهای پیچیده جذب فوتون و تکثیر حامل بر اثر شکست بهمنی، تحلیل و پیش بینی رفتار APD نسبتا مشکل است. در این مقاله با لحاظ کردن برخی فرضیات ساده کننده، براساس ساز و کارهای داخل افزاره معادلات آهنگ حامل در نواحی مختلف آشکار ساز را تعیین می کنیم. با تبدیل این معادلات ریاضی به روابط مداری متناظر آن، یک مدار معادل برای APD - SAM بدست می آوریم. با مدل ارایه شده بهره، بازده کوانتومی و جریان تاریک افزاره را بررسی می کنیم. نتایج بدست آمده با داده های تجربی مقایسه می شود. مطابقت خوب این مدل با داده های تجربی نشان می دهد که این مدل قادر است به ازای تغییر پارامترهای مثل ولتاژ بایاس، ابعاد نواحی و طول موج نور رفتار آشکار ساز را با تقریب قابل قبولی پیش بینی کند.
    کلیدواژگان: آشکار ساز نوری بهمنی، جذب فوتون، شکست بهمنی، مدار معادل
  • محمد خلج امیرحسینی صفحه 29
    در این مقاله یک نوع جدید از رابطها یا خطوط کوپل شده با نام «خطوط میکرواستریپ دایروی متقارن» معرفی می شود. ابتدا ماتریسهای خازنی و سلفی این خطوط توسط حل معادله لاپلاس به روش سری فوریه بدست می آیند. سپس با استفاده از مثالهائی خصوصیات این خطوط بررسی می شوند.
    کلیدواژگان: خطوط کوپل شده، میکرواستریپ، دایروی متقارن و سری فوریه
  • رامین خسروی، عباس محمدی صفحه 35
    ضرب کننده های فرکانس مایکروویو برای تولید و تامین فرکانسهای پایدار و مشخص از یک منبع فرکانسی با مشخصات پایداری و نویز مطلوب، همواره به عنوان بخش حایز اهمیتی در سیستمهای مخابراتی مطرح می باشند. در این مقاله با ارایه نحوه طراحی ضرب کننده های فرکانس مایکروویو، مراحل طراحی، ساخت و اندازه گیری دو مدار دو و سه برابر کننده فرکانس با به کارگیری ترانزیستور اثر میدان HEMT تشریح شده است. تطبیق مطلوب نتایج اندازه گیری با نتایج روش طراحی بیانگر صحت و دقت روش ارایه شده می باشد.
    کلیدواژگان: ضرب کننده فرکانس، HEMT
  • عماد حمیدی، عبدالعلی عبدی پور، فرخ آرزم صفحه 41
    یکی از مباحث بسیار مهم در طراحی مدارات مایکروویو، مبحث نویز و استخراج پارامترهای نویز مدار می باشد. در این مقاله روش جدیدی در زمینه استخراج پارامترهای نویز معرفی شده است. با استفاده از نتایج اندازه گیری مربوط به یک نوع ترانزیستور مایکروویو، نتایج این روش با نتایج یکی از روش های معتبر مقایسه شده است.
    کلیدواژگان: عدد نویز، استخراج پارامترهای نویز، اندازه گیری نویز و مدارات مایکروویو
  • معرفی کتاب
    صفحه 45
  • تقدیر و تشکر
    صفحه 46
|
  • S. M. Mirsarraf, A. Movaghar, M. Hakkak Page 3
    For location updating of mobile users, two compression algorithms, namely, LZ78 and proposed compression algorithm (modified LZ78) are introduced in this paper to be used in PCS networks. Some problems related to using these algorithm are the usage of memory of dictionary in mobile users and HLR data base as well as the ambiguity about the last location of mobile users due to delay in location updating caused by the compression algorithm. The advantage of these algorithms is reduction at the number of location updatings for a mobile user. With some modifications in the LZ78 algorithm, its problems in implementation are reduced and its usage for PCS networks is enhanced. These changes result from combining this algorithm with distance based location updating algorithm and sending symbols corresponding to some limited neighborhoods identity instead of cell number by compression algorithm For comparison between LZ78 and proposed modified algorithm, we use simulation technique. The simulation program have two structures for PCS network, namely, square cells and hexagon cell networks. For mobile users, we considered two movement pattern: one is directional and the other is omnidirectional movement pattern. The outputs of the simulation program are the number of location updating, the maximum ambiguity of user location and size of dictionary for compression algorithms. Comparing the two algorithms by simulation, we observe that in the modified LZ78 algorithm the parameters of location updating number, maximum user ambiguity and size of dictionary are lower than those in the LZ78 algorithm.At the end of the article, cost of location management of mobile user versus call to mobility ratio (the average number of call toward user to the average number of its movement) is calculated. By comparing location management for LZ78 algorithm, modified LZ78 and distance based location updating algorithm, we observe that the cost of location management is reduced for modified LZ78 compression algorithm.
  • A. Dana, A. Khadem Zadeh, M. E. Kalantari Page 15
    In order to guaranty the quality of real time services on IP based networks, robust survivability with fast fault recovery and path restoration are the main goals. Many recent restoration methods spend much time for fault recovery and path restoration.MPLS based networks with connection –oriented ability can guaranty QoS by useful restoration method in short time.In this paper we proposed a new restoration mechanism base on pre-assigned end to end protection path. We apply self similar and Poisson process separately for modeling the traffic arrivals time. The comparative analysis between two models reveal the reliability growth gained through applying the proposed algorithm.
  • M. Soroosh, M. K. Moravvej, Farshi, A. Zarifkar Page 24
    Using some simplifying assumptions in a separate absorption and multiplication avalanche photodiode (SAM-APD), in this paper we develop a circuit model. Then, using this circuit model, we calculate the gain and the quantum efficiency of the device. To examine the accuracy of the device, we compare the results obtained from the model with the experimental results. A fairly good correspondence between the model an the experimental results, shows that this model is capable of predicting the device behavior, while varying different parameters such as applied bias, device size, and hence the light wavelength.
  • M. Khalaj Amirhosseini Page 29
    In this paper a new kind of coupled lines called circular symmetric coupled microstrip transmission lines is introduced. At first the capacitance C and inductance L matrices of this kind of microstrip lines are determined by solving the laplace’s equation using fourier series method. Then by some examples the capacitance C and inductance L matrices of this kind of microstrip lines are discussed.
  • R. Khosravi, A. Mohammadi Page 35
    The frequency multipliers are widely used in microwave and wireless transceivers. This paper introduces an accurate technique to model and to design a microwave frequency multiplier using HEMT transistors. Based upon this technique, a frequency doubler in C band and a frequency tripler in Ku band are designed and implemented. The excellent agreement between simulation and measurement results shows the validity and the accuracy of the technique.
  • E. Hamidi, A. Abdipour, F. Arazm Page 41
    One of the most important topics in designing the microwave circuits is the topic of noise and “noise parameter extraction of the circuits”. In this paper a new method is introduced for noise parameter extraction. The results of the new method are then compared with the results of one of the commonly used methods using the measured noise parameters of a microwave transistor.