فهرست مطالب

مهندسی عمران و محیط زیست دانشگاه تبریز - سال چهل و ششم شماره 3 (پیاپی 84، پاییز 1395)

نشریه مهندسی عمران و محیط زیست دانشگاه تبریز
سال چهل و ششم شماره 3 (پیاپی 84، پاییز 1395)

  • تاریخ انتشار: 1395/10/10
  • تعداد عناوین: 9
|
  • کاظم بدو *، بهاره محمدسیدی صفحات 1-15
    امروزه آلاینده های هیدروکربنی از مهم ترین منابع آلوده کننده خاک و سفره های آب زیرزمینی به شمار می آیند. ترکیبات BTEXاز جمله هیدروکربن های سبک موجود در بنزین هستند که به علت سمی بودن و اثرات مخرب طولانی مدت در محیط زیست، مورد توجه قرار گرفته اند. طراحی روش های پاکسازی مناطق آلوده شده به این آلاینده ها نیازمند آشنایی با رفتار و پیش بینی نحوه انتشار آن ها می باشد. در این پژوهش، نحوه انتشار ترکیبات BTEX در ناحیه اشباع و غیر اشباع خاک با استفاده از روش اجزا ی محدود مورد بررسی قرار گرفت. انتشار مولفه های مختلف ترکیبات BTEX با هم مقایسه گردید و عوامل موثر بر انتشار و میزان انتقال آن ها در فازهای آب، گاز و سیال آلی ارزیابی گردید. نتایج تحقیق نشان دادند که هر چه ضریب هدایت هیدرولیکی خاک بیشتر باشد، تاثیر مشخصه های فیزیکی آلاینده هیدروکربنی سبک در میزان انتشار آن محسوس تر است. نتایج نشان دادند که عمق نفوذ ترکیبات BTEX در خاک نسبت به تغییرات ضریب α ون گنوختن بسیار حساس است. در مقایسه میزان گسترش ترکیبات BTEX در فازهای مختلف، بیشترین گسترش در فاز آبی و گازی مربوط به مولفه بنزن و در فاز سیال آلی مربوط به اتیل بنزن می باشد. نتایج نشان دادند که مدل نظری استفاده شده در این تحقیق از دقت کافی در پیش بینی نحوه انتشار آلاینده های هیدروکربنی سبک در خاک های اشباع و غیر اشباع برخوردار است.
    کلیدواژگان: ترکیبات BTEX، انتشار آلودگی، روش اجزای محدود، خاک اشباع و غیر اشباع، سفره آب زیرزمینی
  • آرمان روشن روان، رضا تاری نژاد *، مجید دامادی پور، حامد محجوب صفحات 17-29
    شناسایی سیستم یکی از مهم ترین و موثرترین روش ها برای بررسی رفتار سازه در دوره بهره برداری و نیز تشخیص مشکلات احتمالی پیش آمده در سازه می باشد. روش های متعددی در زمینه شناسایی مودال سیستم های سازه ای مورد استفاده قرار می گیرند که هر کدام مزایا و معایبی را در استخراج پارامترهای مودال (فرکانس های طبیعی و ضرایب میرایی) دارا هستند. در این مقاله از ترکیب روش های تجزیه حوزه فرکانس (FDD) و تبدیل موجک (WT) به منظور استفاده از مزایای هر کدام و رفع کاستی های تک تک آن ها در جهت برآورد مشخصات دینامیکی استفاده شده است. برای استخراج فرکانس های طبیعی از روش تجزیه حوزه فرکانس استفاده شده است که از دقت بسیار بالایی در برآورد فرکانس ها برخوردار است. در این روش، با تجزیه ماتریس چگالی طیف توان خروجی، مقادیر تکین محاسبه شده و فرکانس های طبیعی به دست می آیند. روش تجزیه دامنه فرکانس هرچند دقت خیلی مناسبی در براورد مقادیر فرکانس های طبیعی دارد، اما در محاسبه میرایی از دقت مناسب برخوردار نیست. در این مقاله، به منظور رفع این نارسایی از تبدیل موجک در محاسبه ضرایب میرایی استفاده شده است. با استفاده از تبدیل موجک و تجزیه سیگنال های ثبت شده به سیگنال های تک فرکانسی شامل فرکانس های طبیعی، ضرایب میرایی با دقت بالایی محاسبه شده است. به عنوان مطالعه موردی سد کارون 3 که یکی از بزرگ ترین سدهای دو قوسی کشور می باشد به علت اهمیت آن و دارا بودن اطلاعات شتابنگاری مناسب روی بدنه آن، انتخاب شده است.
    کلیدواژگان: شناسایی سیستم، تبدیل موجک، تجزیه حوزه فرکانس، ضرایب میرایی، فرکانس های طبیعی
  • محمد شکرچی زاده*، عطیه فراهانی، محمدحسین تدین، رایحه خاقانپور صفحات 31-38
    امروزه سازه های بتنی نقش بسیار مهمی در زیرساخت های هر جامعه ای دارند. بنابر این شرایط و عملکرد این سازه ها از اهمیت ویژه ای برخوردار هستند. در سال های اخیر تعداد زیادی از سازه های بتنی در مناطق جنوبی کشور در اثر پدیده خوردگی دچار آسیب دیدگی و یا خرابی زودرس شده اند. تخریب بتن در محیط های حاوی یون کلرید از جمله رایج ترین این خرابی ها در سازه های بتنی بوده و یکی از مهم ترین مشکلاتی است که مهندسان عمران در تعمیر و نگهداری سازه های بتنی منطقه خلیج فارس با آن مواجه می باشند. در راستای بررسی پدیده خوردگی ناشی از انتشار یون کلرید در بتن، نمونه هایی بتنی با 5، 10 و 15 درصد پوزولان متاکائولن با نسبت آب به مواد سیمانی 4/0 و بدون پوزولان با نسبت های آب به سیمان مختلف (35/0، 4/0 و 5/0) در شرایط رویارویی پاشش به مدت 50 ماه واقع در منطقه خلیج فارس (جزیره قشم) قرار داده شده است. نتایج حاکی از آن هستند که با افزایش نسبت آب به سیمان در آزمونه های بتنی واقع در محیط پاششی، ضریب انتشارپذیری افزایش می یابد. میزان غلظت کلرید سطحی نیز در کوتاه مدت، با افزایش نسبت آب به سیمان افزایش می یابد. در حالی که مقدار غلظت کلرید سطحی در بلند مدت به تدریج ثابت می شود. همچنین با افزایش زمان رویارویی آزمونه های بتنی در محیط کلریدی، میزان ضریب انتشارپذیری یون کلرید و غلظت کلرید سطحی در بتن کاهش می یابد. استفاده از متاکائولن نیز موجب کاهش ضریب انتشارپذیری یون کلرید در بتن و افزایش غلظت کلرید سطحی در مقایسه با آزمونه شاهد می شود.
    کلیدواژگان: بتن، کلرید سطحی، ضریب انتشارپذیری یون کلرید، نسبت آب به سیمان، متاکائولن
  • عیسی شوش پاشا *، بهزاد سعیدی صفحات 39-50
    شمع عنصر ساختمانی لاغر یا ستون نسبتا بلندی می باشد که برای انتقال بارهای ساختمانی به لایه های زیرین خاک به کار برده می شود. انتقال بار از شمع به خاک، از طریق اصطکاک جدار و نوک صورت می گیرد. مقاومت اصطکاکی شمع، به پارامتر های زیادی بستگی داشته و تاثیر به سزایی بر ظرفیت باربری شمع ها دارد. دانستن مقدار دقیق مقاومت اصطکاکی از اهمیت بالایی برخوردار می باشد. لذا در این مطالعه با انجام 14 آزمایش بارگذاری فشاری بر روی شمع های بتنی کوچک مقیاس با ابعاد مختلف در خاک ماسه ای سرخ رود، مقاومت اصطکاکی شمع ها مورد بررسی قرار گرفت. آزمایش فوق بر روی سه دسته شمع، با قطر های 9، 11 و 5/12 سانتی متر و طول های مختلف و با اسلامپ 18 سانتی متر صورت گرفته است. نتایج آزمایش بارگذاری نشان دادند که با افزایش طول شمع ها مقاومت اصطکاکی آن ها افزایش پیدا کرده ولی این افزایش، روندی کاهشی داشته و گسیختگی شمع ها در محدوده نشست 5/1 تا 2 درصد قطر شمع ها رخ داده است. همچنین به ازای یک مقدار ثابت از طول، با افزایش قطر، مقاومت اصطکاکی شمع ها تقریبا ثابت مانده است. در انتها نیز با تحلیل برگشتی بر روی نتایج حاصل از آزمایش بارگذاری، پارامترهای موثر بر مقاومت اصطکاکی شمع شامل k tanδوLc/d به دست آمده که در صورت استفاده از این مقادیر سازگاری خوبی بین نتایج آزمایشگاهی و تئوری حاصل خواهد شد.
    کلیدواژگان: شمع های بتنی، مقاومت اصطکاکی، ماسه، آزمایش بارگذاری شمع، گسیختگی شمع
  • مسعود فرزام*، مجید برقیان، بیتا ارغوانی خواه صفحات 51-61
    روش های متنوعی برای ارزیابی آسیب پذیری لرزه ای ساختمان ها وجود دارد که از نظر هزینه و دقت متفاوت می باشند. در این بین منحنی های شکنندگی که احتمال خسارت سازه ای را به عنوان تابعی از مشخصه های حرکت زمین و پارامترهای طراحی در نظر می گیرند متداول تر هستند. این منحنی ها درصد احتمال فراگذشت پاسخ سازه از حد مجاز عملکردی را در شدت های متفاوت زمین لرزه بیان می کنند. در این تحقیق، ساختمان های قدیمی بتنی با پانل های پیش ساخته که در آذربایجان شرقی واقع شده اند مورد بررسی قرار گرفتند. در مدل سازی و تحلیل مدل های سازه، از نرم افزار SAP استفاده شد. منحنی های شکنندگی برای این سازه ترسیم و تاثیر عملکرد انواع اتصالات پانل ها بر احتمال آسیب این ساختمان ها بررسی گردید. زمانی که سازه تنها دارای اتصالات قائم می باشد، مقدار PGA متناظر با فراگذشت از سطح آسیب جزئی، برابر باg 03/0 است. برای حالت آسیب متوسط، آسیب اصلی و آسیب شکست این عدد به ترتیب برابر g05/0، g07/0 و g10/0 برآورد گردید. در حالت استفاده همزمان از اتصالات قائم و افقی، مقدار PGA برای چهار حالت آسیب جزئی، آسیب متوسط، آسیب اصلی و آسیب شکست، به ترتیب برابر g25/0، g46/0، g7/0 و g1/1 می باشد. نتایج نشانگر آن هستند که هرچه سطح آسیب بالاتر می رود، اختلاف بین PGAمتناظر با گذشت از آن سطح آسیب، برای سازه با و بدون اتصال افقی بیشتر می شود و در شتاب های بالا این اختلاف محسوس تر است.
    کلیدواژگان: منحنی شکنندگی، سازه پیش ساخته بتنی، سطوح عملکرد، تحلیل تاریخچه زمانی
  • مسعود نوشادی *، مهرنوش شیبانی فر صفحات 63-74
    در مناطق وسیعی از ایران آب شور وجود دارد که با استفاده از روش های مناسب تصفیه مانند اسمز معکوس (RO) تصفیه می گردد ولی پساب بسیار شور و غلیظ RO که دفع آن به صورت روزافزونی دشوار شده است، باید مدیریت شود. پساب سیستم های RO به تدریج در حین تصفیه آب، غلیظ و از املاح کربنات کلسیم، سولفات کلسیم، سولفات باریم و سیلیکا فوق اشباع می شود. بنابر این برای استفاده مجدد از این پساب باید به دنبال فرآیندهایی برای ممانعت از رسوب این املاح روی سطح غشاء و در نتیجه کاهش نفوذپذیری آن بود. یکی از پیشرفته ترین روش های مدیریت پساب شور سیستم های RO، فرایند تخلیه مایع به میزان صفر (ZLD) است. هدف این تحقیق، ارزیابی فرآیندهای چند مرحله ای ZLD برای رسیدن به حداکثر بازده ترسیب نمک های محلول در پساب و استفاده مجدد از آن در RO می باشد. این تحقیق بر روی پساب اسمز معکوس منطقه ویژه اقتصادی خلیج فارس در شهر بندرعباس انجام شد. برای حذف کلسیم و منیزیم از ترسیب شیمیایی با آلوم و بستر سیال کریستالی و برای حذف سیلیکا و باریم از بستر سیال کریستالی (جذب سطحی) با آلوم و آلومینای فعال استفاده شد. از بین فرآیندهای فوق فرآیند بهینه ZLD شامل بستر سیال کریستالی با آلومینای فعال (g/L 1) همراه با آلوم (mg/L 100) بود که مقادیر کلسیم، منیزیم، سختی کل، سیلیسیم و باریم را به ترتیب 75/76، 14/84، 26/87، 12/78 و 0/52 درصد کاهش داد. کاهش مقدار سیلیسیم در همه آزمایشات نسبت به یکدیگر و نسبت به پساب خام در سطح 5% معنی دار بود به جز آزمایش های بستر سیال کریستالی همراه با آلومینای فعال با و بدون ماده منعقد کننده که نسبت به یکدیگر معنی دار نبودند. مقدار کاهش باریم در کلیه آزمایش ها نسبت به پساب خام در سطح 5% معنی دار بود. بنابر این با این روش می توان برخی پارامترهای مضر برای سیستم اسمز معکوس (سیلیسیم و باریم) را به حد قابل توجهی کاهش داد به گونه ای که بتوان این پساب را مجددا به سیستم اسمز معکوس بدون آن که برای سیستم مشکلی ایجاد کند برگشت داد.
    کلیدواژگان: ZLD، بستر سیال کریستالی، آلومینای فعال، سیلیسیم، باریم
  • محمد دلنواز*، جلیل خالصی صفحات 77-87
    تقاطع های غیر همسطح با هدف جداسازی فیزیکی مسیرهای ترافیکی نقش بسزایی در کاهش بار ترافیکی معابر و تلفات انرژی دارند. از طرفی علاوه بر بررسی های فنی و اقتصادی، جنبه های زیست محیطی و اجتماعی این گونه پروژه ها باید مد نظر قرار گیرد. هدف از این مطالعه، ارزیابی زیست محیطی ناشی از احداث بزرگراه طبقاتی شهید صدر تهران در فازهای ساختمانی و بهره برداری به روش های کدگذاری و ماتریس لئوپولد تغییر یافته (ماتریس ایرانی) می باشد. در روش کدگذاری در مرحله ساختمانی، پروژه دارای 5 اثر مثبت، 30 اثر منفی و 229 فعالیت فاقد اثر بر محیط زیست می باشد که بیشتر اثرات منفی با تمهیداتی مناسبی مانند استفاده از روش های پیش ساخته رفع گردیده است. همچنین در مرحله بهره برداری، پروژه دارای 19 اثر مثبت، 5 اثر منفی و 160 فعالیت فاقد اثر بر محیط زیست است که با استفاده از دیوارهای صوتی اثرات منفی در فاز بهره برداری به حداقل رسیده است. در روش ماتریس لئوپولد بر اساس نتایج حاصل از بررسی وضعیت موجود و اعداد به دست آمده از ماتریس و مقایسه اثرات درگزینه های عدم اجرا و اجرا مشخص گردید که گزینه اجرا در فاز ساختمانی دارای امتیاز 20- و در فاز بهره برداری 30+ می باشد و گزینه عدم اجرا در فاز ساختمانی دارای امتیاز 2+ و در فاز بهره برداری 36- می باشد.
    کلیدواژگان: پایدار، ارزیابی زیست محیطی، پل صدر، ماتریس لئوپولد، چک لیست
  • سیداحسان فاطمی*، مژگان پاک بین، مریم حافظ پرست مودت صفحات 89-99
    امروزه توجه به طرح های توسعه برق آبی با توجه به ضرورت دستیابی به منابع انرژی پاک از اهمیت ویژه ای در جهان برخوردار است. نیروگاه های برق آبی یک پتانسیل بزرگ جهانی تولید برق می باشند که مشکلات زیست محیطی بسیار کمتری به همراه دارند. انرژی برق آبی در حدود 19% از کل انرژی الکتریکی تولیدی جهان را در سال 2003 پوشش داده که این نسبت به سرعت در حال گسترش است. موضوع میزان انرژی تولیدی در فصول مختلف سال یا ساعات مختلف شبانه روز از مهم ترین موضوعات قابل بررسی در نیروگاه های آبی است. به عبارت دیگر تعیین ظرفیت نصب (دبی طراحی)، از عوامل مهم در طراحی نیروگاه به شمار می آید. بر این اساس در این تحقیق یک الگوریتم توسعه یافته شبیه سازی تولید انرژی برق آبی به کمک نرم افزار MATLAB توسعه داده شده است. این مدل توسعه یافته جهت مدل سازی برق آبی سیستم حوضه آبریز سد ابوالعباس که در محدوده جنوب غربی کشور در استان خوزستان واقع شده است، به کار برده شده است. در این شرایط شبیه سازی تولید انرژی سد مذکور برای ظرفیت نصب های نیروگاهی مختلف انجام شد و نهایتا با اعمال شاخص اطمینان پذیری 90 درصد، ظرفیت نصب نیروگاه برابر 7/2 مگاوات تعیین گردید. در این ظرفیت نصب، انرژی اولیه و مازاد در اغلب ماه ها اتفاق افتاده است. همچنین در 33 درصد مواقع که مخزن در حداکثر تراز خود قرار دارد انرژی اضافی تولید شده است. هم چنین میزان انرژی اولیه و متوسط انرژی مازاد سرریزی به ترتیب برابر 8/20 و 2/13 گیگاوات ساعت در سال به صورت 24 ساعته تعیین شد. این الگوریتم و مدل توسعه یافته قابلیت به کارگیری در هر مخزنی را دارد.
    کلیدواژگان: انرژی برق آبی، اطمینان پذیری، ظرفیت نصب، انرژی اولیه و مازاد، سد ابوالعباس
  • عطاالله ندیری*، فاطمه واحدی، اصغر اصغری مقدم، علی کدخدایی صفحات 101-112
    منابع آب زیرزمینی از مهم ترین منابع تامین آب هستند، لذا مدل سازی آن ها حائز اهمیت می باشد. در این میان مطالعه و بررسی نوسانات سطح آب زیرزمینی از نظر مطالعات مدیریتی، ایجاد سازه های مهندسی، مصارف کشاورزی و حصول آب های زیرزمینی با کیفیت بالا از اهمیت بالایی برخوردار است. عمده تقاضا برای آب شرب و کشاورزی در دشت مشگین شهر نیز از طریق آب زیرزمینی تامین می شود. در این تحقیق چهار مدل هوش مصنوعی که عبارتند از شبکه عصبی پیشرو، شبکه عصبی برگشتی، منطق فازی ساگنو و ماشین بردار پشتیبان برای پیش بینی سطح آب زیرزمینی استفاده شدند. با توجه به نزدیک بودن نتایج به دست آمده و با توجه به این مسئله که مدل های مختلف در مراحل مختلف مدل سازی نتایج متفاوتی ارائه دادند، انتخاب یکی از مدل ها به عنوان مدل منتخب معقول به نظر نمی رسید. لذا از ترکیب غیر خطی این چهار مدل که مدل هوش مصنوعی مرکب نظارت شده نامیده می شود، برای ترکیب نتایج این مدل ها استفاده شد تا نتایج به دست آمده تقویت شده و از توانایی مدل های مختلف به طور هم زمان استفاده شود. به منظور ارزیابی کارایی و دقت مدل ها در پیش بینی، از دو معیار مختلف RMSE و R2 استفاده شد. نتایج نشان دادند که مدل SCMAI با مقادیر R2 برابر 85/0 و 90/0 به ترتیب برای پیزومترهای شماره 1 و 2 در مرحله آموزش بهترین پیش بینی را نسبت به هر کدام از چهار مدل منفرد هوش مصنوعی ارائه کرده است. همچنین مدل SCMAI توانست RMSE پیش بینی را تا 9% درصد برای پیزومتر شماره یک و 17% درصد برای پیزومتر شماره دو کاهش دهد.
    کلیدواژگان: سطح آب زیرزمینی، شبکه عصبی مصنوعی، فازی، ماشین بردار پشتیبان، مدل هوش مصنوعی مرکب
|
  • Kazem Badv*, Bahareh Mohammad Seyyedi Pages 1-15
    BTEX compounds are light hydrocarbons in the gasoline which have attracted attention due to their long-term toxicity and deteriorating effects on the environment [1, 2]. In this study, the propagation of BTEX compounds in unsaturated and saturated zones of soil was investigated by the finite element method. The propagation of different components of BTEX was compared and the contributing factors on their propagation and transportation in water, gas and oil phases were evaluated. The results showed that when the hydraulic conductivity of the soil is high, the effect of physical properties of light hydrocarbon on extend of propagation is pronounced and the BTEX compounds propagation depth is very sensitive to the van Genuchten’s coefficient of α. Comparing the extend of propagation of BTEX compounds in different phases shows that the maximum propagation in the water and gas phases belongs to benzene and in the oil phase belongs to ethyl-benzene. The results showed that the adopted theoretical model is accurate enough to predict the propagation pattern of the light hydrocarbon contaminants in saturated and unsaturated soils.
    Keywords: BTEX compounds, Contaminant propagation, Finite element method, Saturated, unsaturated soil, Aquifer
  • Arman Roshanravan, Reza Tarinejad *, Majid Damadipour, Hamed Mahjoob Pages 17-29
    Operational modal analysis is used to extract the modal parameters of the system based on the responses of the system. Due to the complexity of dam-foundation-reservoir system, accurate measurement of the input excitation to the dam body in not possible. Therefore, in the operational modal analysis methods, the dynamic properties of the system are identified only based on the responses of the system [1]. In classical system identification methods, the structure vibrates due to an external force which may cause it to be out of operation during tests. In addition, the forced vibration tests put the structure in danger of possible damage [2]. Utilizing of ambient vibrations to obtain modal parameters of the system is one of the most important advantages of the operational modal analysis in comparison with classical methods. Low amplitude and low signal to noise ratio of ambient vibration can cause inaccuracy and uncertainty in the identified modal characteristics therefore several signal processing methods should be used to increase the accuracy of the results.
    Keywords: System identification_Frequency domain_Wavelet transform_Karun 3 dam_Damping ratio_Natural frequency
  • Mohammad Shekarchizadeh *, Atiye Farahani, Mohammad Hosein Tadayon, Rayehe Khaghanpour Pages 31-38
    Today, concrete structures have a crucial role in the infrastructure of society. The conditions and performance of these structures are important. In recent years, due to corrosion phenomenon, a number of concrete structures in Southern areas of Iran have suffered damage or premature failure. Concrete damage in the chloride environments is the most common failure of reinforced concrete structures and an important problem for civil engineers which today they are faced with the maintenance of them. Recent societal shift toward sustainable consumption and growth applied to civil infrastructure systems requires the construction materials to be designed and used with utmost attention to their durability and long term response. Pozzolanic materials including silica fume, fly ash, slag, and metakaolin have been used in recent decades for developing high performance concrete with improved workability, strength and durability. Metakaolin has been used as a pozzolan for high performance concrete applications. This material is a thermally activated alumino-silicate which is mostly manufactured by calcinations of kaolin clay at the temperature range of 500-850°C [1].
    Keywords: Concrete, Diffusion coefficient, Surface chloride, Metakaolin, Water to cement ratio
  • Issa Shooshpasha *, Behzad Saeedi Pages 39-50
    The piles are foundations that transfer the load from building to the subsoil. And generally used in situations where spread or mat footings are not the best choice. Some examples include situations where the surface soil is weak and compressible, the structural loads are very high the upper soil is subjected to scour, and horizontal load capacity is required Due to poor bearing capacity and settlement of the soil, application of the piles have a long history Correct estimation of bearing capacity of piles is one of important issues that is always under attention of geotechnical researchers, because determination of ultimate bearing capacity of piles is required for their safe designing. The effect of various issues such as inhomogeneous, and variety of the soil, water, the diversity of the various combinations of the soil in nature, possibility of the creep, complicate behavior of stress-strain, complicate interaction of the soil and pile, pile material, and methods of construction make some difficulties in determination of the bearing capacity. Transmission of load from the pile to the soil is by the shaft friction and toe. it is important to know the exact of amount the friction resistance, therefore in this study, the shaft resistance of piles in Sorkhrood sandy soil was investigated through 14 pressure loading tests on small scale concrete piles with different dimensions and the obtained results were compared with the results of some other methods.
    Keywords: Concrete piles, Frictional resistance, Sand, Pile loading test, Pile failure
  • Masoud Farzam *, Majid Barghian, Bita Arghavani Khah Pages 51-61
    The use of precast concrete structures - due to better quality and reduced time to build- is a suitable economic option for multi-story buildings. In many countries, prefabricated structural systems are generally very economical structures compared with other conventional residential structures.
    Prefabricated structures are classified in four categories: large panel systems, frame systems, columns - slabs together with wall systems and complex systems. The system which will be addressed in this study is the large panel system. This system can be applied to structures in which the precast load bearing walls are used as the main system to withstand large loads. As the seismic behavior of these structures severely depends on vertical and horizontal connections between panels, therefore the behavior of these connections are studied in this research. Horizontal connections are the connections which are placed horizontally and are used to connect panels laterally. Vertical connections connect upper parts of a panel to the lower parts.
    Due to the placement of the panels together, three distinct forms of structures built with prefabricated panels are classified as follows:
    Keywords: Fragility curve, Concrete Precast Structure, Performance limit, Analysis time history
  • Masoud Noshadi *, Mehrnaz Sheibanifar Pages 63-74
    Need for urban water supply in many parts of the world has become a crisis. The need for affordable inland desalination has become critical in many regions of the world where communities strive to meet rapidly growing water demands with limited freshwater supplies [1].
    Among various desalination technologies, reverse osmosis (RO) membranes currently have wide acceptance [2].
    In ZLD, concentrated water is treated to produce desalinated water and essentially dry salts. Consequently, there is no discharge of liquid waste from the process [3]. There are a variety of process options that can be considered for the intermediate concentrate step including adsorption processes, chemical precipitation, and ion exchange, or even combinations of these processes [4]. Water that passes through the membrane is recovered as product water. As recovery of product water in RO is pushed to its sustainable limit, water on the feed side of the membrane becomes increasingly concentrated and supersaturated, with respect to sparingly soluble salts such as calcium carbonate (CaCO3), calcium sulfate (CaSO4), barium sulfate (BaSO4), and silica (SiO2) [5, 6, 7]. If the feed solution becomes sufficiently supersaturated, these salts precipitate and form deposits on the membrane surface. Deposition of these inorganic precipitates on the membrane surface, referred to as scaling, reduces the permeability of the membrane [8, 9]. Therefore, recovery in RO systems is limited by the precipitation potential of sparingly soluble salts [10].
    Keywords: Fluidized bed crystallization, Activated alumina, Silica, Barium
  • Mohammad Delnavaz*, Jalil Khalesi Pages 77-87
    Environmental Impact Assessment (EIA) is a tool for assisting environmental management and for contributing to sustainable development. EIA is very vital in large project that are conctructed in populated palaces. Environmental Assessment is now internationally accepted methodology for evaluating the effects of proposed major transport infrastructure projects on the environment [1]. EIA is a process of evaluating the likely environmental impacts of a proposed project or development, taking into account inter-related socio-economic, cultural and human-health impacts, both beneficial and adverse [2]. UNEP defines EIA as a tool used to identify the environmental, social and economic impacts of a project prior to decision-making. It aims to predict environmental impacts at an early stage in project planning and design, find ways and means to reduce adverse impacts, shape projects to suit the local environment and present the predictions and options to decision-makers. By using EIA both environmental and economic benefits can be achieved, such as reduced cost and time of project implementation and design, avoided treatment/clean-up costs and impacts of laws and regulations [3]. Sadr elevated expressway is one of the most important project in Iran that was constructed between 2011-2013. Sadr expressway is located at municipal districts 1, 3 and 4, and geographic coordinates of 51 °, 25 ', 19 " to 51 °, 29', 52" east longitude, and 35 °, 46 ', 30 "to 35 °, 47 '35 " north latitude. The expressway has been constructed as a huge bridge over the existing Sadr freeway, in the north it is also limited to regions 1, 7, 8 of Tehran municipal district 1 and in the south, it has common border with regions 2 and 3 of municipal district 3 and region 3 of municipal district 4. The high bridge is located between Imam Ali and Modares expressways. The length designed for the expressway, including entrance ramps is 11 km.
    Keywords: Sustainable development, Environmental impact assessment, Sadr bridge, Leopold matrix, checklist
  • Seyed Ehsan Fatemi *, Mozhgan Pakbin, Maryam Hafezparast Mavadat Pages 89-99
    By increasing of population rate in the world, the energy demand is increasing simultaneously. Nowadays, regarding to hydropower developing plans for achieving to clean energy sources has particular importance in the world. Hydropower plants are the one of the biggest world potential in energy generation having the minimum environmental problems [1]. Reservoir operation is one of the most important issues in the various problems of water resources. A reservoir operation policy is consist of rules which are determined the amount of water allocated or released from a reservoir [2]. Integrated water resources management is more considered to operate reservoirs in the water basin rather than past. It considers the hydropower demand as an independent water user with other water demands to reservoirs operation policy [3].
    The subject matter of energy generation is the most important issue on hydropower plants in the seasons of a year or in the hours of daylight. In the other words, determination of installed capacity and designed discharge are the important factors in designing of hydropower plants. In case, a new developed algorithm of hydropower energy generation simulation is introduced by Matlab software in this study. This developed model is applied to simulate power generation of Abolabas reservoir system which is located in the west south of Iran, Khozestan province.
    Keywords: Hydropower energy, Reliability, Installed capacity, Firm, second energy, Abolabas reservoir
  • Ata Allah Nadiri *, Fatemeh Vahedi, Asghar Asghari Moghaddam, Ali Kadkhodaie Pages 101-112
    Groundwater is an important water resource supplying agricultural, domestic, and industrial needs. Hence, studying and investigation of this vital source is necessary. Over extraction of groundwater cause adverse effects, such as major water level declines [1], consequently water-quality degradation, land subsidence [2], and saltwater intrusion. Therefore, accurate prediction of groundwater level will help planer and managers of water resources and prevent the mentioned effects. The literature shows the success of using artificial intelligence (AI) models in the field of groundwater level such as artificial neural network (ANN) [3], fuzzy logic (FL) [4], and support vector machine (SVM) [5]. Although several studies are reported in the literature that use Supervised committee machine artificial intelligence (SCMAI) as a modeling technique in the field of hydrology e.g. [6] to combine the results of different models to reap the advantages of all AI. This study applied a supervised committee machine with an artificial intelligent (SCMAI) method that replaces linear combination with an artificial neural network. In the SCMAI the ANN receives individual model estimations as input variables and re-predicts the groundwater level.
    The Meshginshahr plain is located in Northwest Iran in the Province of Ardabil (Fig. 1). The aquifer of this plain is unconfined. The prevailing climate in this plain is semiarid-cold. The average annual temperature and rainfall are 11.66 ˚C and 292 mm respectively. Sabalan Mount with the height of 4814 meters asml, is the highest point in the study area
    Keywords: Groundwater level, Artificial neural network, Fuzzy, Support vector machine, Supervised intelligence committee machine