فهرست مطالب

نشریه به زراعی نهال و بذر
سال بیست و ششم شماره 3 (1389)

  • تاریخ انتشار: 1389/10/11
  • تعداد عناوین: 8
|
  • رجب چوکان، علی شیرخانی صفحه 233
    بیست هیبرید مختلف داخلی و خارجی ذرت دانه ای از پنج گروه رسیدگی دردو فصل زراعی (1386 و 1387) در منطقه اسلام آباد کرمانشاه مورد مطالعه قرار گرفتند. این بررسی به صورت کرت های یکبار خرد شده در قالب طرح بلوک های کامل تصادفی در سه تکرار به اجرا در آمد که در آن چهار تاریخ کاشت (اول اردیبهشت،10 اردیبهشت، 25 اردیبهشت و 10 خرداد) در کرت های اصلی و هیبریدهای ذرت در کرت های فرعی قرار گرفتند. نتایج حاصل نشان داد که اواسط اردیبهشت مناسب ترین زمان کاشت ارقام دیررس در منطقه معتدل کرمانشاه بود. تاریخ کاشت سوم (اواخر اردیبهشت) و بویژه تاریخ کاشت چهارم (اوایل خرداد) می تواند موجب برداشت ارقام دیررس با رطوبت بالا و تاخیر کشت محصول بعدی (گندم) گردد. هیبرید تجارتی KSC 704 در تاریخ کاشت های اول، دوم، سوم و چهارم به ترتیب در دهه آخر شهریور، دهه اول مهر، اواخر دهه دوم مهر و دهه اول آبان آماده برداشت بود که در کشت های آخر باعث محدودیت زمانی برای آماده سازی مناسب زمین و تاخیر در کشت گندم در مناطق معتدل استان می شود. هیبریدهای متوسط رس با حدود دو هفته زودرسی در تاریخ های کاشت سوم و هیبریدهای متوسط- زودرس با حدود دو هفته تا 20 روز زودرسی در تاریخ های کاشت سوم وچهارم می توانند بدون تفاوت معنی دار در عملکرد دانه با رقم شاهد به آسانی در کشت های تاخیری جایگزین رقم تجارتی KSC 704 گردند.
    کلیدواژگان: ذرت، گروه های رسیدگی، تاریخ کاشت، عملکرد دانه و زودرسی
  • رجب چوکان، علی شیرخانی صفحه 259
    در این پژوهش 20 هیبرید ذرت دانه ای داخلی و خارجی از پنج گروه مختلف رسیدگی در دو فصل زراعی (1386 و 1387) در اسلام آباد کرمانشاه از نظر نیاز واحدهای گرمایی مورد مطالعه قرار گرفتند. به منظور ایجاد محیط های مختلف و امکان برآورد نیاز حرارتی هر یک از گروه ها، چهار تاریخ کاشت (اول اردیبهشت، 10 اردیبهشت، 25 اردیبهشت و 10 خرداد) در نظر گرفته شد. نتایج حاصل نشان داد که بر اساس نیاز حرارتی تا گلدهی، هر دو سیستم درجه روز رشد ((GDD و واحدهای حرارتی گیاه ((CHU برآورد قابل قبولی از واحدهای حرارتی مورد نیاز هیبریدهای مربوط به گروه های مختلف رسیدگی ذرت را برآورد و گروه بندی مشابهی را برای این هیبریدها ارائه کردند. در هر دو سیستم، هیبریدهای NS 540 و OSSK 552 را از گروه بندی اولیه خود (گروه (FAO 500 به گروه دیررس تر (گروه (FAO 600 جابجا نمودند. همچنین هیبریدهای BC 404 و OSSK 499 از گروه بندی اولیه خود (گروه (FAO 400 به گروه دیررس تر (گروه FAO 500) جابجا شدند. بالاخره هیبرید BC 504 از گروه اولیه خود (FAO 500) به گروه زودرس تر (گروه (FAO 400 جابجا شد. در بررسی نیاز حرارتی تا رسیدگی فیزیولوژیک، سیستم CHU روند مشخصی را ارائه نکرد ولی بر اساس سیستم GDD کلیه هیبریدها در پنج گروه مختلف رسیدگی قرار گرفتند که با گروه بندی نیاز حرارتی تا گلدهی نیز تا حدود زیادی منطبق بود.
    کلیدواژگان: ذرت، GDD، CHU، گروه رسیدگی، تاریخ کاشت و رسیدگی فیزیولوژیک
  • فرنگیس قنواتی، جواد مظفری صفحه 285
    یران یکی از بزرگ ترین مراکز تنوع جنس یونجه (Medicago) محسوب می شود. در این تحقیق در سال های 1380تا 1385یونجه های یک ساله از استان های مختلف کشور جمع آوری و شناسایی گردید و رابطه پراکنش جغرافیایی این گونه ها با فاکتورهای اکولوژیکی بررسی و تجزیه و تحلیل گردید. نتایج نشان داد که گونه های یک ساله یونجه، عمدتا در شمال غرب، غرب و جنوب کشور پراکنش یافته اند و دو عامل ارتفاع از سطح دریای آزاد و میانگین بارندگی سالانه مهم ترین عوامل در پراکنش آنها می باشند. بطوریکه بیشترین پراکنش در ارتفاع صفر تا 2750 متری از سطح دریای آزاد با میانگین بارندگی 100 تا 400 میلیمتر در سال با اقلیم مدیترانه ای و بیابانی گرم و خشک می باشند. این گیاهان در pH قلیایی هفت تا هشت نیز رشد مناسبی دارند. بررسی بافت خاک نشان می دهد که خاک مناسب جهت رویش این گیاهان، خاک های میانه بافت یا سنگین است. برخی از گونه ها، در شرایط اکولوژیکی متفاوتی نسبت به سایرین رشد می کنند. بطوریکه گونه های M. rigidula و M. rigiduloides با شرایط آب و هوایی سرد کشور سازگار می باشند، در حالی که گونه های M. laciniata و M. sauvagei در مناطق جنوبی کشور با میانگین دمای بالای 20 درجه سانتی گراد دیده می شوند. گونه M. littoralis گیاهی ساحلی می باشد و در حاشیه دریای خزر و خلیج فارس گسترده است، در حالی که گونه M. noeana تنها در شمال غرب و غرب کشور وجود دارد.
    کلیدواژگان: یونجه یک ساله، خصوصیات محیطی، پراکنش، ارتفاع از سطح دریا و میانگین بارندگی
  • محمود هوشیارفرد، علی اصغر میری صفحه 301
    این تحقیق در سال زراعی 1386، به منظور ارزیابی اثرآرایش های ردیف نکاشت بر عملکرد، اجزاء عملکرد، کیفیت الیاف و بیماری های پژمردگی ورتیسیلیومی، پوسیدگی قوزه و لکه برگی آلترناریایی پنبه در شرایط بدون آبیاری در ایستگاه تحقیقات پنبه کارکنده (35 کیلومتری غرب گرگان) انجام شد. آزمایشات به صورت کرت های خرد شده و در قالب طرح پایه بلوک های کامل تصادفی در سه تکرار با استفاده از دو ژنوتیپ پنبه (تابلادیلا و شماره 200) در کرت های اصلی و سه آرایش ردیف کاشت (1×2، 1×1 و ردیف کاشت متوالی) در کرت های فرعی اجرا شد. نتایج نشان داد عکس العمل ژنوتیپ ها با رفتارهای رشدی متفاوت نسبت به آرایش های ردیف کاشت متفاوت بود (05/0 ≥ P). کیفیت الیاف، وقوع و یا شدت آلودگی برخی بیماری ها تحت تاثیر آرایش ردیف کاشت قرار گرفتند (05/0 ≥ P). میزان عملکرد الیاف (3070-3027 کیلوگرم در هکتار) و درصد زودرسی (7/81-1/78 درصد) در ردیف های نکاشت نسبت به ردیف کاشت متوالی بیشتر بود. کیفیت الیاف شامل: درصد کیل الیاف و ضریب میکرونری (شاخص ظرافت الیاف) در آرایش های ردیف نکاشت بهتر و به ترتیب در دامنه 5/30-5/29 و 9/3-3/3 قرار گرفت. اثر متقابل ژنوتیپ × آرایش ردیف مشخص نمود که آلودگی آلترناریائی در تیمار تابلادیلا × (آرایش ردیف 1×2) کمتر و پژمردگی ورتیسیلیومی بوته در تیمار آرایش (ردیف 1×2) × شماره 200 و ردیف کاشت متوالی بیشترین میزان آلودگی را داشتند. میزان پوسیدگی قوزه در آرایش های ردیف نکاشت کمتر بود، چنانکه کمترین میزان پوسیدگی قوزه در تیمار (آرایش ردیف 1×2) × تابلادیلا مشاهده گردید (3/1 درصد). به طور کلی نتایج نشان داد که ایجاد ردیف های نکاشت در زراعت پنبه می تواند باعث کاهش پوسیدگی قوزه و افزایش درصد زودرسی و عملکرد کمی و کیفی الیاف پنبه شود.
    کلیدواژگان: پنبه، آرایش ردیف نکاشت، طول الیاف، ضریب میکرویزی و پژمردگی ورتیسیلیومی
  • ابوالفضل فرجی صفحه 317
    در این تحقیق اثر عوامل محیطی مانند دما، کسر فتوترمال و بارندگی در دوره پر شدن دانه بر وزن دانه گونه های مختلف براسیکا به مدت سه سال زراعی (85-1382) با استفاده از طرح بلوک های کامل تصادفی در سه تکرار در گنبد بررسی شد. بیست ژنوتیپ از گونه های مختلف براسیکا پنج ژنوتیپ کلزای زمستانه (B. napus L.)، پنج ژنوتیپ کلزای بهاره (B. napus L.)، پنج ژنوتیپ شلغم روغنی (B. rapa L.) و پنج ژنوتیپ خردل زراعی (B. junceae L.) در تاریخ کاشت مناسب منطقه کشت شدند. در تمام گونه های مورد مطالعه، بین وزن هزار دانه با میانگین دمای هوا، کسر فتوترمال و بارندگی در دوره پر شدن دانه رابطه خطی وجود داشت. افزایش تشعشع همراه با دماهای نسبتا ملایم طی دوره یاد شده سبب افزایش وزن دانه شد. نرخ افزایش وزن هزار دانه به ازای هر میلی متر افزایش بارندگی در دوره پر شدن دانه در ژنوتیپ های کلزای تیپ بهاره، کلزای تیپ زمستانه، خردل زراعی و شلغم روغنی به ترتیب 0094/0، 0247/0، 0105/0 و 0132/0 گرم بود. به ازای افزایش هر روز طول دوره پر شدن دانه نیز وزن هزار دانه ژنوتیپ های کلزای تیپ بهاره، کلزای تیپ زمستانه، خردل زراعی و شلغم روغنی به ترتیب 0533/0، 1682/0، 0456/0 و 0529/0 گرم افزایش یافت. این روابط بیانگر واکنش بیشتر وزن دانه ژنوتیپ های کلزای تیپ زمستانه به مساعد بودن عوامل محیطی در دوره پر شدن دانه بود. عدم وجود رابطه معنی دار بین تعداد دانه در مترمربع و وزن دانه در گونه های مختلف براسیکا نشان داد که در این مطالعه اندازه مخزن برای مواد فتوسنتزی تاثیر معنی داری بر وزن دانه نداشت، بلکه وزن دانه عمدتا تحت تاثیر عوامل محیطی در دوره پر شدن دانه قرار گرفت.
    کلیدواژگان: براسیکا، دوره پر شدن دانه، بارندگی، درجه حرارت، کسر فتوترمال و وزن دانه
  • سونا حسین آوا، محی الدین پیرخضری * صفحه 329

    به منظور ارزیابی خصوصیات کمی و کیفیت در هشت واریته فندق شامل فرتیل، پشمینه، رسمی، گرجه، روند، شصتک، نگرت و گردویی از خصوصیات مرفولوژیکی و شیمیایی استفاده شد. این ارزیابی در سالهای 1386 و 1387 در قالب طرح بلوک های کامل تصادفی در سه تکرار در ایستگاه تحقیقات باغبانی کمال شهر موسسه تحقیقات اصلاح و تهیه نهال و بذر در کرج انجام گردید و 21 خصوصیت شامل: رشد رویشی، قطر تنه، تعداد پاجوش، قطر تاج، طول و عرض برگ، طول میانگره، وزن، طول و عرض میوه، وزن پوشینه، وزن مغز، درصد میوه، درصد مغز، درصد چربی، درصد پروتئین، کلروفیل کل، کلروفیل a و b و نسبت کلروفیل a/b در واریته های فندق اندازه گیری شد. تجزیه واریانس داده ها تفاوت معنی داری را بین واریته های فندق از نظر کلیه صفات مورد بررسی نشان داد. واریته فرتیل در مقایسه با سایر واریته ها، دارای خصوصیات کمی و کیفیت برتری بود. تجزیه خوشه ایواریته های فندق را به سه گروه و یک رقم مستقل تقسیم نمود. نتایج این تحقیق نشان داد که خصوصیات مرفولوژیکی یکی از ابزارهای قابل اطمینان برای شناسایی و ارزیابی واریته ها و ژنوتیپ های فندق می باشند

    کلیدواژگان: فندق، خصوصیات مرفولوژیکی، کیفیت و تجزیه خوشه ای
  • مریم جعفری، ناصر بوذری صفحه 343
    به منظور تکثیر رویشی پایه گزیلا 6 (Gisela6) از قلمه چوب سخت در دو زمان مختلف دی و بهمن و تیمار با هورمون های ایندول بوتیریک اسید (IBA) و نفتالین استیک اسید (NAA) با غلظت های صفر،1000،2000، 3000 میلی گرم درلیتر و قلمه چوب نیمه سخت در دو زمان تیر و مرداد و تیمار با هورمون های NAA و IBA و با غلظت های صفر،1000، 1500 میلی گرم در لیتر استفاده شد. شاخه های گزینش شده برای ریشه زایی در هر دو نوع (سخت و نیمه سخت) به دو قسمت ابتدایی و انتهایی بطور جداگانه تقسیم و اثر زمان و غلظت های مختلف هورمون بر ریشه زایی آن ها مورد بررسی قرار گرفت. آزمایش بصورت فاکتوریل سه عاملی در قالب طرح کاملا تصادفی در سه تکرار اجرا شد. تجزیه واریانس داده ها نشان داد که اثر زمان، نوع قلمه و غلظت های مختلف هورمون بر درصد ریشه زایی در سطح 1 % معنی دار بود. مقایسه میانگین ها نیز نشان داد که بیشترین درصد ریشه زایی(70 %) مربوط به تیمار 1000 میلی گرم در لیتر IBA در قسمت انتهایی قلمه های چوبی نیمه سخت تیرماه بود. در قلمه های چوب سخت بیشترین درصد ریشه زایی (6/46%) مربوط به تیمار 3000 میلی گرم در لیتر IBA در قسمت ابتدایی قلمه های دی ماه بود. افزایش غلظت هورمون، باعث افزایش تعداد ریشه اصلی و فرعی و طول قسمت ریشه دار گردید و از طرفی منجر به کاهش میانگین طول ریشه اصلی و فرعی شد.
    کلیدواژگان: گیلاس، تکثیر رویشی، ریشه زایی، Gisela6، IBA و NAA
  • سید نجم الدین مرتضوی، حسین ربی انگورانی، محسن خدادادی صفحه 359
|
  • R. Choukan, A. Shirkhani Page 233
    Twenty Iranian and exotic maize hybrids in five different maturity groups were studied in Kermanshah in 2007 and 2008 growing seasons. Four planting dates (20 April, 30 April, 14 May and 01 June) and hybrids were arranged as split plot in randomized complete block design with three replications. The planting dates were assisgned to main plots and hybrids were randomized in sub-plots. Results indicated that early May is the most suitable planting date for late maturing hybrids in temperate region of Kermanshah. Mid-May planting as well as late-May and early-June can cause harvesting with high grain moisture in late maturing hybrids, and delay planting of the following crops in autum. Commercial maize hybrid, KSC 704, was ready for harvest with proper moisture in 10-15 Sep., 23-30 Sep., mid-Oct. and late Oct., in planting dates of 20 April, 30 April, 14 May and 01 June, respectively. Late plantings limits the time for land preparation, therefore, delays planting of wheat as following crop. Mid-season hybrids with shorter crop life cycle become ready for harvest about 2-3 weeks earlier from 14 May and 01 June planting dates. These hybrids are identified as suitable for replacement of KSC 704, without significant reduction in grain yield.
  • R. Choukan, A. Shirkhani Page 259
    Twenty Iranian and exotic maize hybrids in five different maturity groups were studied in Kermanshah in 2007-2008 growing seasons. Temperature variations were created by four planting dates (20 April, 30 April, 14 May and 01 June). Estimated heat units from planting to flowering, using both thermal indices, GDD and CHU, were reliable in different maturing maize hybrids and nearly created similar grouping for maize hybrids. Both indices, changed hybrids NS 540 and OSSK 552 from former FAO 500 maturity group to later maturing group, FAO 600. BC404 and OSSK499 hybrids were also changed from ealier maturity group FAO 400 to later maturity group FAO 500. However, BC 504 hybrid changed from FAO 500 to earlier maturity group, FAO 400. Although GDD and CHU were reliable for estimating planting to silking (flowering), CHU did not provide a reliable thermal units for estimating planting to maturity. Based on GDD for planting to maturity, all hybrids grouped in five maturity groups, which was similar to groups based on estimated GDD for planting to flowering.
  • F. Ghanavati, J. Mozaffari Page 285
    Iran is one of the most important centers of diversity for Medicago species. Annual medics collected from different provinces were evaluated and the relationship between their eco-geographical distribution, geographical and ecological characteristics was analysed. Results showed that annual medics were distributed mostly in the North-West, West and South of Iran. Altitude and average annual precipitation were the two important factors in distribution of annual medics in Iran. Most of the species were distributed from 0-2750 meter above sea level, in areas with 100-400mm of average annual precipitation and Mediteranean climates. Annual medics grow well in soils with pH=7.0-8.0. Soil texture analysis showed that the suitable soil for annual medics was Loam or Clay soils. Nevertheless, some species could grow in different ecological areas. Among these species M. rigidula and M. rigiduloides were adapted to cold zones, while M. laciniata and M. sauvagei were found in southern parts of Iran with 20 °C average temperature. M. littoralis is a littoral plant and grows near the Caspian Sea in the North and Persian Gulf in the South. M. noeana was also found only in North-west and West of Iran.
  • M. Houshiar Fard, A. A. Miri Page 301
    To evaluate the impacts of different skip-row planting patterns on yield, yield components, lint quality and infection to Verticillium wilt, Boll rot and Alternaria leaf spot diseases in non-irrigated cotton (Gossypium hirsutum L.) a field experiment was conducted in Karkandeh Experimental Field Station, Gorgan, Iran, in 2007 growing season. The experiment was carried out in split-plot arrangements using randomized complete block design with three replications. Two cotton genotypes; Tabladila and N200 were assigned to main plots and 80-cm row spacing in solid (80-cm conventional rows), 1×1 skip-row planted and one left unplanted) and 2×1 skip-row (two rows planted and one left unplanted with 16 cm skip) pattern were randomized in sub-plots. Results showed that the two genotypes with different growth habit differed in their response to planting row patterns. The lint quality and infection severity of some diseases were not affected by skip-row pattern. The lint yield (3027-3070 kg/ha) and earliness (78.0-81.7%) were higher in skip-row pattern as compared with solid pattern. Fiber length 2.5% and micronair of lint were in the range of 29.5-30.5 and 3.3-3.9 in skip-row, respectively. The genotype × skip-row interaction indicated that N200 × (2 × 1 skip-row), and 80-cm solid rows had more Verticillium wilt disease index, however, Alternaria infection was lower in Tabladia × (2 × 1 skip-row). Skip-row planting pattern reduced boll rot disease infection as compered to solid planting pattern as boll rot (%) was lower (1.3%) in (2 × 1 skip-row) × Tabladila. These results showed that planting row pattern could reduce boll rot and increased quantity and quality of yield and earliness in cotton.
  • A. Faraji Page 317
    The effect of environmental factors as temperature, photothermal quotient and rainfall during seed filling period (SFP) on seed weight of different species of Brassica was studied in Gonbad during 2003–2006 growing seasons. Twenty genotypes from different species of Brassica including: five genotypes of spring B. napus, five genotypes of winter B. napus, five genotypes of B. rapa, and five genotypes of B. juncea were sown at optimum sowing date recommended for the area. In all species, there was a linear relationship between 1000- seed weight and mean air temperature, photothermal quotient and rainfall during SFP. Increase in radiation accompanied with relatively moderate temperatures during SFP, hence, increased seed weight. Each millimeter increase in rainfall during SFP increased the rate of 1000-seed weight of spring and winter rapeseeds, mustard and turnip genotypes by 0.0094, 0.0247, 0.0105 and 0.0132 g, respectively. In addition, with an each day increase in duration of SFP, 1000-seed weight of spring and winter rapeseeds, mustard and turnip genotypes increased by 0.0533, 0.1682, 0.0456 and 0.0529 g, respectively. These relationships showed that winter rapeseeds genotypes had more response to favorable environmental factors during SFP. The non-significant relationship between seed number per unit area and seed weight in different species of Brassica showed that under conditions of this study sink size did not affect seed weight, but it was affected by environmental factors during seed filling period.
  • S. Hossein Ava, M. Pirkhezri Page 329

    To evaluate quantitative and quality charecteristics in eight hazelnut varieties; Fertile, Pashmineh, Rasmi, Gorjeh, Round, Negret and Gerdouee, morphological and chemical characteristics were used. This experiment was conducted using randomized complete block design with three replications in Horticultural Research Field Station, Kamal-Shahr, Karaj, Iran, in 2007 and 2008 growing seasons. Twenty one characteristics including: vegetative growth, trunk diameter, number of suckers, canopy diameter, length and width of leaf, length of internode, weight, length and breadth of fruit, fruit (%), kernel (%), fat (%), protein (%), total chlorophyll, chlorophyll a, chlorophyll b and chlorophull a/b were measured and recorded. Analysis of variance showed that there was significant differences among hazelnut varieties for all measured traits. Fertile was superior for quantative and quality characteristics as compared with other varieties. Cluster analysis grouped the hazelnut varieties into three groups and one single variety, i.e., Fertile. Results of this research indicated that morphological characteristics are suitable for identification and evaluation of genotypes/varieties of hazelnut.

  • M. Jafari, N. Bouzari Page 343
    To study effects of different times of collection, IBA and NAA concentrations on rooting and related characteristics of hard wood and semi-hard wood cuttings in Gisela6 root stocks two experiments were conducted in green house-using factorial arrangements in completely randomized design with three replications. First experiment included: Two times of cutting collection (January and February), two types of cuttings (basal and terminal) and four concentrations of IBA and NAA (0, 1000 and 2000 and 3000 ppm). The second experiment included: two times of cutting collection (June and July), two types of cuttings (basal and terminal) and three concentrations of IBA and NAA (0, 1000, 1500 ppm). Results showed that times of cutting and hormones significantly (p<0.01) affected rooting (%) in hard wood and semi-hard wood cuttings in Gisela6 cherry rootstock. In semi-hard wood cuttings, the highest rooting (70%) was obtained in terminal type of cutting collected in July and treated by 1000 ppm IBA. However, in hard wood cuttings, the highest rooting (46.6%) was observed in basal type of cuttings collected in January and treated by 3000 ppm IBA. As auxin concentration increased, the number of primary and secondary roots as well as the length of rooting section increased. However, the average length of primary and secondary roots decreased.
  • N. Mortazavi, H. Rabi Angourani, M. Khodadadi Page 359
    To study the effect of sucrose and calcium chloride on the quality and longevity of cut flower of rose cv. Varlon, this experiment was conducted at the Faculty of Agriculture, Zanjan University, Zanjan, Iran, in 2007. Cut flowers were received from Mahallat Ornamental Plants and Flowers Research Station. Experimental factors included: Sucrose at four levels (0, 40, 80 and 100 mg/l) and Calcium chloride at four levels (0, 300, 600, 900 mg/l). The experiment was carried out using factorial arrangement in completely randomized design with three replications. Results showed that sucrose significantly (p<0.01) affected longevity (senescence %), relative water content, solution uptake and electrolyte leakage in cut flowers of rose cv. Varlon. Calcium chloride also significantly (p<0.01) improved relative water content and solution uptake, as well as longevity and electrolyte leakage but to lesser extent (p<0.05). Results indicated that 100mg/l sucrose per se significantly improved longevity and relative water content. However, 40 mg/l sucrose with 90 mg/l calcium chloride significantly increased electrolyte leakage.