فهرست مطالب

نشریه هوزان
سال دوم شماره 1 (2017)

  • تاریخ انتشار: 1396/04/20
  • تعداد عناوین: 3
|
  • ذبیح الله یوسفی، ثریا فاضلی، محمود تقوی صفحه 1
    مقدمه و هدف
    تجزیه فتوکاتالیستی رنگ توسط نانو ذرات TiO2 دارای مزایای زیادی از جمله عدم نیاز به انرژی بالا و بازدهی بالا، معدنی سازی کامل در زمان ماند کمتر و... می باشد. سرعت تجزیه با افزایش غلظت ذرات TiO2 و غلظت رنگ تا یک سطح خاص، افزایش می یابد. حدود 1 تا 20 درصد رنگ مورد استفاده در رنگ آمیزی در حین عملیات از دست می رود و وارد پساب می شود. از اینرو رنگ یکی از آلاینده های مهم در فاضلاب صنایع نساجی می باشد. برخی روش های متداول در حذف رنگ شامل سوزاندن، تصفیه بیولوژیکی، اکسیداسیون پیشرفته، ازن زنی، و جذب روی فازهای جامد می باشند هدف از این مطالعه بررسی کاربرد و عوامل موثر در حذف رنگ با استفاده از TiO2 بود.
    روش بررسی
    این مطالعه بصورت مروری بر مطالعات انجام شده بر روی نانو ذرات TiO2 در حذف رنگ، و جستجو در پایگاه های اطلاعاتی Sciencedirect، Pup Med، Iranmedex، Irandoc، Sid، Springer و غیره انجام گردیده است.
    نتیجه گیری
    با توجه به مزایای ذکر شده برای تجزیه فتوکاتالیستی توسط نانو ذرات TiO2 ، به نظر می رسد که این روش، راهکاری مناسب برای تجزیه و تخریب رنگ موجود در پساب صنایع نساجی باشد. pHبهینه برای تجزیه فتوکاتالیستی توسط نانوذرات TiO2، pH اسیدی می باشد. افزایش دما نیز موجب تسریع انجام واکنش می شود.
    کلیدواژگان: TiO2، رنگ زدایی، پساب نساجی، فتوکاتالیست
  • ادریس حسین زاده، ثریا فاضلی، حدیث مرادی زاده، بهرام کمره ای، معصومه حسن زاده، سهیلا افراسیابی، بهارک یوسف وند، مهدی صفری صفحه 14
    مقدمه و هدف
    آب های زیرزمینی از مهمترین منابع آبی برای تامین آب شرب شهرها و روستاها محسوب می شوند. هدف از این مطالعه بررسی وضعیت میکروبی آب چاه های تامین آب مصارف شرب و عمومی موجود در روستایی شهرستان رومشگان بوده است.
    روش بررسی
    این مطالعه توصیفی-مقطعی در سال 93 انجام گرفت. نمونه برداری با استفاده از بطری های استریل انجام گرفت و کیفیت میکروبی به روش MPN(محتمل ترین تعداد کلیفرم) و روش استاندارد تست IMVIC بررسی گردید. عمل نمونه برداری، انتقال به آزمایشگاه و آنالیز نمونه ها به روش کتاب روش های استاندارد آزمایش آب و فاضلاب تعیین شد.
    یافته ها
    بر اساس نتایج به دست آمده 27 چاه آلوده به اشرشیاکلی، 24 چاه آلوده به کلبسیلا پنومونیا، 24 چاه آلوده به کلبسیلا اوکسی توکا، 21 مورد آلوده به انتروباکتر، 36 مورد آلوده به سیترو باکتر فروندی، 34 مورد آلوده به سیترو باکتر کاسری بودند و تنها سه مورد از چاه ها عاری از هرگونه عامل میکروبی بوده است. نتایج مربوط به سنجش دما و pH نشان داد pH همه نمونه ها در حد استاندارد قرار دارد و هدایت الکتریکی 951 میکروزیمنس بوده است.
    نتیجه گیری
    نتایج این مطالعه مشخص نمود که آلودگی میکروبی آب چاه های مورد مطالعه خیلی زیاد است. بنابراین مصرف و نوشیدن آب این چاه های خانگی می تواند سلامت مصرف کنندگان را تهدید کند و موجب بروز بیماری های منتقله از آب شود. سازمان های تامین کننده آب باید اقدامات لازم جهت گندزدایی مناسب، آموزش مصرف کنندگان و بررسی کیفیت میکروبی جهت جلوگیری از شیوع بیماری را به عمل آورند.
    کلیدواژگان: MPN، آزمون ایمویک، کیفیت آب، چاه
  • افشین ملکی، یحیی زندسلیمی، رضا رضایی، مختار رستمی، ادیب معیری، پگاه بهمنی، اسدالله نوری، شیوا زندی، شهرام صادقی، اسمعیل قهرمانی صفحه 24
    مقدمه و هدف
    آب آشامیدنی منبع مهمی از مواد معدنی ضروری برای بدن می باشد که در غلظت های مشخص برای بدن مفید هستند؛ از جمله املاح آب که بر سلامت بدن موثر می باشد فلوراید است که کاهش مقدار آن باعث پوسیدگی دندان می شود. همچنین غلظت بالای آن نیز باعث اختلالات اسکلتی، فلوروزیس، ناراحتی های گوارشی و اختلالات عصبی می شود. با توجه به اینکه آب شرب مهمترین راه ورود فلوراید به بدن می باشد پایش مقدار آن در آب شرب ضروری است لذا هدف از انجام این مطالعه تعیین غلظت فلوراید در روستاهای شهرستان دیواندره در سال 94 و پهنه بندی آن با GIS بود.
    روش بررسی
    در این مطالعه 99 نقطه شامل 59 چاه، 18چشمه و 22 مخزن در 78 روستای شهرستان دیواندره جهت نمونه برداری انتخاب شد. نمونه برداری طی دو فصل سال شامل فصول کم آبی (مهر و آبان ماه) و پر آبی (اواخر فروردین و اردیبهشت ماه) انجام شد. برای انتقال نمونه-های برداشت شده از ظروف پلی اتیلنی استفاده گردید و بعد از انتقال نمونه ها به آزمایشگاه، مقدار فلوراید آن ها با استفاده از دستگاه یون کروماتوگرافی IC (مدل Metrohm 882 compact IC plus ) قرائت شدند.
    یافته ها
    نتایج حاصله نشان داد 5/40 درصد نمونه های برداشت شده در فصل کم آبی دارای غلظت فلوراید بالاتر از مقدار استاندارد (mg/L 5/1) بوده اند در حالیکه برای نمونه های برداشتی در فصل پرآبی فقط 33 درصد نمونه ها خارج از محدوده استاندارد قرار داشته اند (که از این میزان 8/81 درصد دارای غلظت فلوراید بالاتر از استاندارد و 2/18 درصد کمتر از حد مجاز بوده اند)
    نتیجه گیری
    نتایج نشان داد نمونه های آب روستاهای جنوب دیواندره از نظر غلظت یون فلوراید دارای وضعیت مقبول تری هستند. بطور کلی می توان گفت مواجهه با مقادیر بیش از استاندارد فلوراید در روستاهای دیواندره بالا است، البته بر اساس مقدار کمتر از استاندارد فلوراید شایع تر می باشد. با توجه به اینکه رویکرد پهنه بندی کیفی آب با GIS برای نشان دادن نتایج آزمایشات کیفی آب می تواند منجر به درک سریع و سهولت استفاده برای مدیران و افراد غیر متخصص شود، پهنه بندی کیفیت آب سایر شهرها و روستاهای استان کردستان نیز پیشنهاد می شود.
    کلیدواژگان: آب آشامیدنی، فلوراید، GIS، دیواندره
|
  • Zabihollah Yousefi, Soraya Fazeli, Mhmood Taghavi Page 1
    Introduction
    Photo-catalyst decomposition of dye by TiO2 nanoparticles has many advantages including lack of need for high energy and high output¡ full mineralization in less time and so on. With increasing TiO2 and dye concentration¡ the rate of decomposition increases to a certain level as well. About 1 to 20% of used dye in painting is lost during operations and enters into wastewater¡ so dye is one of the considerable contaminates of textile industries wastewater. Some common methods of dye removal include burning¡ biological treatment¡ advanced oxidation¡ ozonization and adsorption. The goal of this study is surveying of the application and effective factors in removal of dye using TiO2.
    Methods
    this study was carried out by reviewing on the performed studies on TiO2 nanoparticles in removal of dye and searching in springer¡ sid¡ Iran Doc¡ Iran Medex¡ Pup Med and Science direct databases.
    Conclusion
    According to mentioned advantages for photocatalyst decomposition by TiO2 nanoparticles¡ it seems that this method is a suitable approach for decomposition and deterioration of dye in textile industries wastewater. The optimal pH for photo catalyst decomposition by nano scale TiO2 is acidic pH. Increasing of temperature results in acceleration in the reaction.
    Keywords: TiO2, Decolorization, textile wastewater, Photocatalyst
  • Edris Hoseinzadeh, Soraya Fazeli, Hadis Moradizadeh, Bahram Kamarei, Masumeh Hassanzadeh, Sohaila Afrasiabi, Baharak Yousefvand, Mahdi Safari Page 14
    Introduction
    Water wells is one of the most important water resources to supply water for village and town areas. Aim of this study was to evaluate the microbiological quality of domestic water wells there are in villages located in Rumeshgan.
    Methods
    This cross-sectional study was performed in 2014-2015. Sampling was performed using sterile sampling bottles. The MPN (most probable number of coliform/100mL) and standard IMVIC test utilized as microbiological indices to evaluate water quality. Sampling and sample transportation and sample analysis were done according to water and wastewater standard methods.
    Results
    Based on obtained results positive samples were as following: 27 samples with E. coli¡ 24 samples with klebsiella pneumoniae ¡ 24 samples with klebsiella oxytoca¡ 21 samples with Enterobacter bacteria¡ 36 samples with citrobacter freundii¡ 34 samples with citrobacter koseri and only 3 samples were free of microbial contamination. The pH value for all samples was in standard range. The mean value of water conductivity for studied wells was 951 µS/cm.
    Conclusion
    The results of the study showed that the level of water contamination in sudied domestic water wells was very high. Therefore¡ using and drinking water from domestic water wells can pose a great threat and risk of waterborne epidemics by bacterial pathogens. Water supplying authorities should consider suitable disinfection¡ education and monitoring of water quality for the provision of contamination free drinking water to prevent waterborne disease outbreaks.
    Keywords: MPN, IMVIC test, water quality, well
  • Afshin Maleki, Yahya Zandsalimi, Reza Rezaei, Mokhtar Rostami, Adib Moayeri, Pegah Bahmani, Asadola Nuri, Shiva Zandi, Shahram Sadeghi, Esmail Ghahramani Page 24
    Introduction
    Groundwater is the major source of essential minerals that are necessary to human body at specific concentrations; Fluoride is a water mineral that is effective for health and reducing tooth decay. Its high concentration can cause skeletal disorders¡ fluorosis¡ gastrointestinal and neurological disorders¡ too. Drinking water is the main way of getting fluoride¡ so it’s monitoring is essential. Therefore¡ this study aimed to measure the fluoride concentration of Divandareh County rural drinking and showing using geographic information system.
    Methods
    In this cross-sectional study¡ 99 points including 59 wells¡ 18 springs and 22 tanks in 78 villages of Divandareh were chosen to measure their fluoride content. Sampling was conducted in the two seasons i.e.¡ dehydration season (October-November) and wet season (late April and May). The sampling was done using polyethylene containers; then transferred to the laboratory and fluoride content measured using ion chromatography (Metrohm 882 compact IC plus model).
    Results
    The results showed fluoride concentration for 40.5% water samples of dehydration season is more than the standard level¡ while only 33 percent of samples were out of standard level (81.8% of them was more than the standard and 18.2% was less than the standard).
    Conclusion
    The fluoride concentration in the water sample of south rural of Divandareh were more acceptable. The obtained results suggested potential for excessive fluoride content in drinking water¡ however¡ these study results indicated low fluoride levels were more common. The GIS approach used in this case study suggests a easy to use and quick understand of water quality¡ so attempt to prepare the fluoride map for all Kurdistan province is recommended.
    Keywords: Drinking water, Fluoride, GIS, Divandareh