فهرست مطالب

مهندسی گاز ایران - پیاپی 7 (شهریور 1397)

نشریه مهندسی گاز ایران
پیاپی 7 (شهریور 1397)

  • تاریخ انتشار: 1397/06/03
  • تعداد عناوین: 6
|
  • محمد بیگی * صفحات 6-15
    از آنجاییکه هنوز تقاضا برای نفت خام در بازارهای بین المللی در سطح بالایی می باشد که پیش بینی می گردد تا چند دهه ی دیگر نیز شرایط به همین گونه باشد، لذا افزایش تولید از مخازن هیدروکربوری می تواند نقش موثری در ثبات آینده انرژی جهان داشته باشد، هم اکنون مناسب ترین روش ازدیاد برداشت از مخازن هیدروکربوری در کشور ایران (عدم افزایش میزان هزینه برای تولید هر بشکه نفت) استفاده و بکارگیری آب و گاز می باشد، زیرا این دو سیال به میزان کافی و نسبتا با صرف هزینه کم قابل دسترسی جهت بکارگیری در مخازن می باشند. در این مقاله تزریق جداگانه و متناوب آب و گاز به عنوان روش ازدیاد برداشت برای مخزن ایلام میدان جفیر در مقیاس محدود 1 با استفاده از نرم افزار شبیه ساز اکلیپس 100 مورد بررسی قرار گرفته است. هدف از این پروژه ارزیابی سناریوهای مختلف تولید شامل تولید طبیعی، تزریق آب، تزریق گاز و تزریق متناوب آب و گاز است، تا در نهایت بهترین سناریوی تولیدی انتخاب گردد، که در نهایت مشخص گردید بهترین سناریوی تولید برای سازند ایلام در این میدان تزریق گاز در ناحیه نفتی می باشد
    کلیدواژگان: سازند ایلام، ازدیاد برداشت، تزریق تناوبی آب و گاز، تزریق آب، تزریق گاز، نرم افزار اکلیپس 100، شبیه سازی مخزن
  • اونیک طوماس * صفحات 16-20
    در این مقاله روش های راه اندازی واحد بازیافت گوگردی بررسی شده اند. بطور کلی دو روش راه اندازی برای این واحدها وجود دارد: 1- پیش گرم کردن بسترها، 2- سرد نگه داشتن بسترها. درحال حاضر در بیشتر واحدهای بازیافت گوگردی از روش پیش گرم کردن بسترها استفاده می شود که معایب خود را دارد. اولین بار در سال 1970 روش راه اندازی با بستر سرد توسط شرکت اورتلاف پیشنهاد شد. در این کار بخشی از روش اورتلاف که مربوط به چگونگی کنار زدن بسترهای کاتالیستی می شود اصلاح گردیده است. با انجام این تغییرات، هزینه و همچنین تجهیزات موردنیاز که توسط اورتلاف جهت سردنگه داشتن بسترها نیاز است کاهش می یابد.
    کلیدواژگان: واحد بازیافت گوگردی، فرآیند کلاوس، تئوری راه اندازی سرد، پیش گرم کردن بستر، بلایند چکشی
  • فاطمه گودرزوند چگینی، کاظم کاشفی * صفحات 21-36
    در این مقاله 23 راهکار منطبق با تجارب روز جهانی برای کاهش انتشار گازهای گلخانه ای از تاسیسات انتقال گاز ارائه شده است که در ارزیابی آنها جنبه عملیاتی بودن و ارزش اقتصادی و سرمایه گذاری به عنوان پارامترهای اساسی لحاظ شده اند. هر یک از این راهکارها از نظر فنی مورد ارزیابی قرار گرفته و کلیه محاسبات مربوط به میزان کاهش انتشار، هزینه سرمایه گذاری اولیه و هزینه عملیات جاری آنها با تعریف چهار معیار در سه سطح انجام شده است. تحلیل نهایی با توجه به مجموع حاصلضرب امتیازات و ضرایب وزنی برای هر چهار معیار انجام شده است. نتایج نشان دادند که بالاترین اولویت در بین راهکارهای کاهش نشر به اجرای روش بازرسی و تعمیرات مستقیم (DI&M) برای شیرهای بین راهی اختصاص یافته است. همچنین، اجرای این روش برای لانچر-رسیورها و خطوط لوله به ترتیب در اولویت های دوم و سوم قرار گرفته است. کمترین امتیاز نیز به استفاده از فناوری ANG برای جذب گازهای خروجی استارترهای توربین تعلق یافت.
    کلیدواژگان: کاهش انتشار، گازهای گلخانه ای، مکانیسم توسعه پاک، انتقال گاز
  • مهدی مهرپویا *، علی رحیمی خامنه صفحات 37-52
    بخش ساختمان، یکی از مصرف کننده های عمده انرژی در کشور بشمار می آید. تامین برق در این بخش عمدتا از نیروگاه های حرارتی با بازده پایین، همراه با نشر آلایندگی بالا صورت می گیرد. امروزه توسعه و بکارگیری سیستم های نوین تولید توان با بازده بالا و مستقل از شبکه توام با آلایندگی کم حائز اهمیت است و تحقیقات گسترده ای به آن اختصاص یافته است. یکی از این سیستم ها، پیل سوختی است. در این مقاله، بکارگیری پیل سوختی اکسیدجامد به عنوان محرک اولیه یک سیستم تولید همزمان جهت تامین مصارف انرژی یک ساختمان نمونه با کاربری خانگی مورد تحلیل فنی و اقتصادی قرار گرفت. فرآیند پیل سوختی اکسیدجامد با استفاده از نرم افزار اسپن پلاس شبیه سازی و امکان بازیافت حرارتی گاز خروجی دما بالای پیل سوختی و تولید بخار برای فعال سازی یک سیکل تبرید جذبی دو اثره و تولید آب گرم در یک مبدل بازیافت حرارتی بررسی گردید. تغییرات توان و بازده سیستم در دو حالت تولید همزمان برق و حرارت و تولید همزمان برق، حرارت و برودت بر حسب نرخ جریان سوخت ورودی بدست آمد. بر اساس مدل مصرف انرژی در ساختمان مورد مطالعه، شرایط تطبیق توان های تولید شده و بار ساختمان با کمترین هزینه مصرف سالیانه انرژی بدست آمد. نتایج تحلیل اقتصادی نشان داده است، هزینه های مصارف انرژی سالیانه سیستم تولید همزمان در مقایسه با یک سیستم تولید توان به صورت مجزا به شدت کاهش می یابد. با تجاری شدن تکنولوژی پیل سوختی اکسیدجامد و کاهش بیشتر هزینه های ساخت، این سیستم می تواند جایگزین بسیار مناسبی برای سیستم های متداول تولید توان باشد.
    کلیدواژگان: تولید همزمان، پیل سوختی اکسیدجامد، بازیافت حرارتی، اسپن پلاس، ساختمان
  • احمد قضاتلو * صفحات 53-62
    با افزایش برداشت از مخازن نفت و گاز و تقاضای انرژی جهان که توسعه تعداد حفاری ها و تکنولوژی های مرتبط به آن را نیز به دنبال داشته بسیاری از کشورها را بر آن داشته است که به اکتشاف و حفاری از مخازن هیدرات گازی متمرکز شوند در نتیجه در سال های اخیر چندین حفاری موفق از این مخازن در نقاط مختلفی از جهان گزارش شده که اغلب در بستر دریاها بوده است و این تفکر که حفاری از مخازن هیدرات گاز طبیعی فرایندی خطرناک است را منسوخ کرده و ترغیب شرکت های بزرگ خدمات نفتی ترغیب به توسعه آن شده اند. چراکه حفاری های موفق این نتیجه را می رسانند که برداشت از مخازن هیدرات گازی به سرعت موجب ناپایداری آن نمی شود و درنتیجه بسیار ای مشکلات تئوری مطرح شده در حفاری از این مخازن منتفی می گردد. نکته باقیمانده در طراحی سیال حفاری و دوغاب سیمان مورد استفاده است که وظیفه حفظ پایداری هیدرات را در طول فرایند حفاری و بهره برداری از مخزن را بر عهده دارند. این مقاله نگاهی جامع به نتایج بدست آمده از فعالیت های حفاری در مخازن هیدرات گازی دارد.
    کلیدواژگان: هيدرات گازي، حفاري، لاگ گيري، مغزه گيري
  • فاطمه گودرزوند چگینی ، کاظم کاشفی * صفحات 63-71
    مهم ترین مسئله در کنترل و کاهش گازهای گلخانه ای، شناسایی صحیح منابع انتشار و اندازه گیری و برآورد دقیق میزان انتشار از این منابع می باشد. راه های مختلفی برای اندازه گیری میزان انتشار وجود دارد که با توجه به ماهیت انتشار از منابع مختلف باید بهترین روش به کار گرفته شود. در این مقاله منابع انتشار گازهای گلخانه ای متان (CH4) و دی اکسید کربن (CO2) از خطوط و تجهیزات انتقال گاز ایران شناسایی شده و میزان نشر این گازها از منابع مربوطه محاسبه و برآورد شده است. در این مطالعه 68 ایستگاه تقویت فشار مورد مطالعه قرار گرفته اند و انواع نشر متان و دی اکسیدکربن (شامل نشر فرار، تخلیه و احتراقی) از تجهیزات این بخش ها در همه حالات عملیاتی شناسایی شده و شدت نشر سالانه از آن منابع (با استفاده از روش ضرایب نشر و ضرایب فعالیت) برآورد شده است. توزیع سن ایستگاه ها، انواع توربین و کمپرسور، پراکندگی ظرفیت و نسبت ظرفیت بر خط ایستگاه ها، پارامترهایی هستند که در تحلیل آماری مورد بررسی قرار گرفته اند. در این مقاله 25 منبع نشر در تاسیسات و عملیات های انتقال گاز شناسایی شده است، که مهمترین آنها شامل نشر فرار از شیرهای بین راهی (8/37 %) ، نشر فرار از بلودان لانچر-رسیورها (7/20 %) ، نشر فرار از تجهیزات روی زمینی خطوط لوله (2/12 %) ، نشر احتراقی از ایستگاه ها (5/12 %) ، و نشر تخلیه از سیل کمپرسورها (8/10 %) می باشد.
    کلیدواژگان: گازهای گلخانه ای، انتشار، انتقال گاز، ایستگاه تقویت فشار
|
  • Mohammad Beygi * Pages 6-15
    In this report, brief description of modeling process to reach proposal scenarios, main results, conclusions and recommendations will be presented. WAG as an EOR method is being considered for Ilam reservoir, located onshore in south- west Iran. The reservoir under study is a reservoir with high amount of H2S and asphaltene. The only drive mechanism is Solution gas drive and it has no active aquifer so although it had good flow potential. By using new reservoir management techniques and enhanced oil recovery in order to pressure maintenance one can recover a lot more oil. The scope of this project was to evaluate in terms of impact of surface facilities, reserves and recovery factor by:  Natural Deletion  Water Injection  Gas Injection  Water alternating gas There are several wells in model and this was possible to change function of production well to injector if needed. Sector model was run for different scenarios and realizations and the best EOR method was selected by considering reservoir rock and fluid data and different injecting fluid composition and different injection pressure. After comprehensive study and technical evaluation it was found that. Gas injection was the best scenario allowing longer plateau compared to Natural depletion and other scenarios.
    Keywords: ILAM Formation, Enhanced Oil Recovery, water alternating gas injection, water injection, gas injection, software Eclipse100, reservoir simulation
  • Onig Thomas * Pages 16-20
    In this paper I will try to compare the presently practised design on warming up of sulfur reactor beds to 300 degree farnhyte in SRU start ups from cold against the concept of cold reactor bed start ups designed & developed by the Ortloff of USA from 1970 and is practiced in their designed plants since then . To me , the cold reactor bed start up is a much better theory and has many advantages. To effect this theory , Ortloff utilises 2 especial controll valves for bypassing the beds during the plant warm up from cold (to keep them safe from harm ) . I have come to realise that the use of those control valves which are so sophisticated and expensive and can be troublesome are not required and installation of 2 hammer blinds can effectively displace those valves and create a more reliable operation.
    Keywords: Sulfur recovery unit , Clause process(reaction) , Cold theory of reactor bed start up , Reactor bed warm up , Hammer blind
  • Kazem Kashefi * Pages 21-36
    In this article, 23 methods for emission reduction in gas transmission facilities, including compression stations, transmission pipelines and valve stations, have been assessed according to operability, technical feasibility and economic profit. Emission reduction potential, payback period, capital and operating costs have been considered as the main criteria, based on which, all methods have been categorized in three levels. Weight factors were considered for each criterion to quantify the ultimate analysis and prioritize based on total score. Net present value (NPV), internal rate of return (IRR) and added value were also considered to precise economic calculations. The results showed that direct inspection and maintenance (DI&M) for valve stations possessed the highest priority, followed up with DI&M for launcher-receivers and pipeline. Utilization on absorbed natural gas (ANG) for turbine starter exhaust gas had the least interest among other methods.
    Keywords: Emission Reduction, Greenhouse Gases, CDM, Gas Transmission
  • Ali Rahimi Khameneh , Mehdi MehrPoya * Pages 37-52
    Buildings are one of the major energy consumers in Iran. Electricity in this section is supplied by thermal power plants with low efficiency and high pollution emissions. Today, the development and deployment of novel power generation systems with high efficiency and independent of the network with low emissions are important and extensive researches have been devoted to them. Fuel cell is one of these systems. In this paper, the application of Solid Oxide Fuel Cell (SOFC) as a prime mover of a cogeneration system to supply energy demands of a typical residential building has been analyzed from technical and economic points of view. The process of SOFC was simulated using Aspen Plus software and the possibility of heat recovery from SOFC high temperature exhaust gas to activate a double effect absorption refrigeration cycle by steam generation and hot water production in a heat recovery heat exchanger was examined. The power and efficiency of heating and power cogeneration and heating, power and cooling cogeneration systems versus inlet fuel rates was obtained. Based on building energy consumption model, the produced powers and building loads matching conditions were obtained based on minimum annual energy cost. Economic analysis has shown that annual energy consumption cost in cogeneration system compared with a separately produced power system will be drastically reduced. With the commercialization of SOFC technology and further reduce manufacturing costs, this system can be very suitable alternative to conventional power generation systems.
    Keywords: Cogeneration, SOFC, Heat recovery, Aspen Plus, Building
  • Ahmad Ghozatloo * Pages 53-62
    Consumption of conventional gas reservoirs and development of drilling, logging and coring technology, many countries and scientists have focused on the gas hydrate explorations. Recently many successful gas hydrate wells have been drilled in the world which is often on the marine environment. Almost one decade ago, it was considered that drilling in gas hydrate reservoirs was quite risky. However, recent drilling expeditions in marine environment show that gas hydrate does not risky and big oil services companies encourages to development of these drillings. Because successful drilling results withdrawals from gas hydrate reservoirs does not dissociate immediately and consequently lot of considered theoretical problems ruled out of the drilling of these reservoirs. It is obvious that special cares should be taken to maintain gas hydrate reservoirs as stable as possible with drilling fluid selection and cement composition selection. This paper presents a comprehensive perspective on the results of drilling activities in the gas hydrate reservoirs.
    Keywords: Gas Hydrate , Drilling , Logging , Coring
  • Kazem Kashefi * Pages 63-71
    Compete and consistent source identification, followed up with accurate emission measurement is the first but the most important step in reduction and controlling of greenhouse gases. Methane and carbon dioxide emission from Iranian gas transmission facilities is discussed in this article. All compression stations and transmission pipeline across the country are within the boundary of this research. Different emission types (fugitive, vent and combustion) in various operating modes (normal, maintenance, startup and process upsets) were considered and annual emission rates for all identified sources were measured or estimated, based on emission/activity factors methods. Stations age and capacity, types of turbines and compressors and the ratio of capacity to number of runs, were considered in statistical analysis. The results revealed 25 emission categories, among which, fugitive emission from station valves was the greatest with 37.8% share of total emission. Fugitive emission from blow-downs of launcher-receivers (20.7%), fugitive from above-ground pipelines (12.2%), combustion emission in stations (12.5%) and vent from compressor seals (10.8%) were in second to fifth order among all other emission sources.
    Keywords: Greenhouse Gases, Emission, Gas Transmission, Compressor Station