Anaerobic Digestion of Nssc Pulping Effluent

Two UASB reactors R-I and R-II, each of 10liters capacity, made up of acryl material were operated parallel and continuously for a period of 220 days, using actual effluent of the NSSC pulp and paper mill, at mesophilic temperature and neutral pH. The main objective was to investigate the treatability performance of the reactors at varying OLR and HRT in terms of TOC and lignin removal. The reactor R-I was used by conventional procedure, whereas, for the reactor R-II methanol and activated carbon was added to supplement its efficiency. Corresponding to an optimum OLR of 4.5kg/m3-day and HRT of 18hrs, the reactor R-II gives 69% TOC and 60% lignin removal. But, in the reactor R-I at same operating conditions, only 56% TOC and 51% lignin removal was noticed. However, the biogas yield in the reactor R-I was noticed relatively more than in the R-II. The biogas yield observed was 0.28m3/kg-CODrem and 0.18m3/kg-CODrem in the reactor R-I and R-II, respectively, with 56-58% methane content in both the reactors. The average VFAs concentration observed in the reactor R-I and R-II is 360mg/L and 230mg/L, respectively. The results of this study suggest that the use of methanol and activated carbon to enhance the treatability efficiency of the UASB reactor is a viable option for the treatment of NSSC pulping effluent.