Development of a lawn aerator for heavy soils of Iran

Soil aeration by imported machines were reportedly unsatisfactory due to creation of shallow holes, taking off some patches of the turf and time consuming work needed for collecting the excavated cores. Considering these problems, a machine was developed to suit Iran’s lawn spaces. To develop an appropriate aerator, the shape of the plugs was studied at the first step and for this purpose six types of plugs with conical and cylindrical cross section (with and without slot) with tips cut diagonally and perpendicularly were built. The plugs were compared in an experiment based on complete randomized blocks design with 3 replication in an urban lawn space with clay soil in terms of the required static force for cutting the thatch and penetrating to the soil as well as the length of projected cores. The results showed that the conical plugs with beveled tips had a 28 millimeter longer cores than the cylindrical plugs with similar tip using approximately equal forces for insertion. Having chosen the appropriate shape of plug, a split roller with a relatively large diameter were constructed for installing plugs around it and the whole device attached to a walking tractor. Comparing the developed machine with a commercial self-propelled aerator revealed that the developed aerator improved the length of the cores and depth of the holes. The split roller in the machine which windrowed the cores also caused a 65% decrease in labor requirement for collecting the cores and did not have dug patches of turf.