فصلنامه سلامت و محیط زیست
سال شانزدهم شماره 3 (پیاپی 61، پاییز 1402)

Monitoring and remediation of metal contaminants in aquatic ecosystems is of particular importance to estimate, control, and reduce the level of threats to alive creatures and humans. Therefore, this study was conducted to evaluate metal contamination of surface sediments and the ability to monitor and bioremediation of iron, lead, and copper by aerial and underground tissues of Typha Latifolia and Nasturtium microphyllum located along the aquatic ecosystem of the Lar River, Tehran, Iran in 2021.

In this descriptive study, after selecting four sampling sites, 48 plant samples and 12 sediment samples were collected. After preparation and acid digestion of the samples in the laboratory, the contents of the elements were determined using inductively coupled plasma-optical emission spectroscopy (ICP-OES). Also, pollution index (PI), pollution load index (PLI), bioconcentration coefficient (BCF), bioaccumulation (BAF), and translocation factor (TF) were calculated. Statistical analyses of the results were performed using SPSS statistical software.

The highest values of Fe, Pb, and Cu (mg/kg) in sediment samples were 11.8 ± 0.665, 0.915 ± 0.030, and 0.710 ± 0.026, respectively, and belonged to station 4; and in plant tissues 11.4 ± 1.25, 0.578 ± 0.180, and 0.298 ± 0.095, respectively, and were belonged to the roots of T. Latifolia. The PI values showed that the pollution of Fe, Pb, and Cu was "low" and the average PI values for the elements followed the descending order of Pb > Cu > Fe. The average values of PLI also vary from 0.003 to 0.006, indicating the quality conditions of "no pollution" in all the studied stations. On the other hand, T. Latifolia had a BCF > 1 and TF < 1 for Fe.

Based on the results obtained, it can be concluded that T. Latifolia is a suitable species for stabilizing Fe in sediments and could be used to monitor and remediate potentially toxic elements from polluted aquatic ecosystems.

Aflatoxins are secondary metabolites of fungi, which can have very dangerous consequences for human health in addition to spoiling food and changing organoleptic properties. Aflatoxin entering the body and targeting the liver as the main organ involved can cause liver and blood cancer. Hence, the aim of the present study is to measure aflatoxin B1 in corn flour and wheat flour supplied in Shahrekord using ELISA method in 2022.

In this study, 40 samples of flour, including 20 samples of corn flour and 20 samples of wheat flour, were randomly sampled from the supply centers and sent to the food hygiene laboratory to track and determine the amount of aflatoxin B1.

The results showed that all samples of wheat flour and corn flour contained aflatoxin 1B. The average of aflatoxin B1 in wheat flour and corn flour was calculated as 2.58 ± 0.95 and 3.47 ± 2.07 (µg/kg) of the sample, respectively; Among the 20 examined samples of corn flour, the concentration of aflatoxin B1 ranged from 3.4 (µg/kg) to 1.9 (µg/kg) and in 20 samples of wheat flour (µg/kg) from 7.90 to (µg/kg) was 1.4; Therefore, the concentration of none of the samples was higher than the Iranian standard.

The occurrence of aflatoxin B1 in all the samples examined in the current study is lower than the risk range determined by the Iranian standard, so in this case, its aasociated high risk does not threaten the health of consumers.

Nowadays, the use of biochar as a new and suitable adsorbent to remove inorganic pollutants from water sources has grown significantly. The present study was conducted to evaluate the effects of biochar physical modifications compared to unmodified biochar on nickel (Ni) removal efficiency in aqueous solutions.

After the production of cypress cones biochar (RB), biochar particles (<164 µm) were crushed into very small (<26 µm) dimensions (BMB) using a planetary ball mill and after evaluation their various properties by SLS, BET, FTIR and SEM techniques, their application (RB and BMB) in optimizing the Ni removal from aqueous solutions were evaluated using the response surface methodology (RSM: Box-Behnken design).

Based on the results, the physical modification of biochar (BMB) decreased the particle size by 6.2 times, increased the specific surface area by 4.9 times, increased (containing oxygen) and decreased (aliphatic and OH stretching groups) of specific functional groups and finer surface morphology, compared to RB. The use of BMB in the aqueous solution caused an increase of 9.7% (on average) in the removal of Ni compared to the RB sample. The fitting of the data obtained from Ni removal in the Box-Benken model in both adsorbents shows the appropriate prediction of this model in the optimization of Ni removal from aqueous solutions.

According to the results of this research, the physical modification of biochar, as a simple, cheap, and environmentally friendly method, due to the increase in the efficiency of Ni pollutant removal, can be introduced as a suitable method in the activation of biochar, which further research is required based on the type of biochar and various pollutants.

Zeolites are among the widely used adsorbents for the removal of arsenic-toxic pollutants. The objective of this study is to prepare granulated zeolite adsorbents using chitosan (CS/Fe-Clin) and alginate (Alg/Fe-Clin) and compare them in terms of physical appearance and arsenic adsorption efficiency.

Granular adsorbents were prepared via the ionotropic gelation method. The effects of the type and concentration of the cross-linking solution and the initial ratio of materials in granules formation, as well as the effect of initial arsenic concentration, and the amount of adsorbent used on the adsorption efficiency, were investigated. SEM, XRD, FTIR, and AAS analyses were used to confirm the results. Equilibrium data were matched with Freundlich and Langmuir isotherms.

A weight percentage of 2 % iron chloride (III) and an initial ratio of 1:4 of alginate: nanocomposite for Alg/Fe-Clin and a weight percentage of 2 % (1 % sodium hydroxide + 1 % sodium tripolyphosphate) and an initial ratio of 1:3 of chitosan: nanocomposite for CS/Fe-Clin were chosen as the optimal values. Maximum adsorption efficiency of Alg/Fe-Clin and CS/Fe-Clin adsorbents was determined 88.1 and 92.9 % at dosages of 0.6 and 1 g/L and at initial concentrations of 200 and 300 µg/L, respectively. The qmax values for Alg/Fe-Clin and CS/Fe-Clin adsorbents were 11.11 and 10 mg/g, respectively. Results better fitted with Freundlich isotherm.

Due to the proper adsorption capacity, both synthesized adsorbents showed the ability to effectively remove arsenic; whoever, alginate binder was more efficient.

The high risk of Sars-CoV-2 infection in dental centers is a serious problem for doctors and patients. The main purpose of this study was to investigate the environmental health measures related to corona disease in the dental offices of Sari city during the COVID-19 epidemic in 2021.

The present study is descriptive and cross-sectional, and the tool used in it is a researcher-made questionnaire collected with the cooperation of the personnel working in 100 active dental service centers in Sari. to determine content validity, two qualitative and quantitative -qualitative methods were used. The qualitative content validity of this questionnaire was confirmed by 8 environmental health experts. Cronbach's alpha was used to determine the reliability of the questionnaire. Data analysis was done using SPSS software V. 25.

Based on the results of this study, personal protective equipment was used continuously in 100% of the centers. In 93% of the centers, sodium hypochlorite and formaldehyde were used to disinfect the equipment, and in 94% of the cases, the frequency of disinfection of the equipment was after each patient. Disinfection of toilets was done daily in 62% of the centers and every two days in the rest. In 72% of the examined dental centers, had no local hood installed or turned on above the units, but in 92% of the offices, there was proper ventilation of public spaces. In addition, according to the results, in 99% of clinics, waste management was carried out in accordance with national laws and regulations and based on the rules and methods of the executive management of medical waste and related waste and related instructions, and also in 100% of clinics, water consumption was healthy and desirable.

Overall, environmental health measures in dental offices were at an optimal level in most cases and in accordance with the instructions of the Ministry of Health. Not installing a hood or not turning it on above the units and improper ventilation of the dentist's office were the most critical problems of the centers, which need to be given more attention and corrective measures should be taken according to the instructions of the Ministry of Health.

During the last few decades, heavy metal pollution in indoor dust has been widely studied; While, the quality of the environment inside the cars has not been considered enough. Therefore, the specific objectives of this study generally include investigating the levels of selected heavy metals in the dust of private cars collected from Ahvaz city, as well as evaluating the health risk of carcinogenesis and exposure to the dust inside these cars through ingestion, inhalation, and skin absorption.

10 cars were selected for this study. The condition of choosing the cars was not to wash the car for a week. Then, samples were collected and coded from the dust of the air conditioner filter and the cabin of each car. To determine the composition of heavy metals, spectroscopic analysis (ICP) was performed on the samples.

The study of non-carcinogenic risk index (HI) in the present study indicates that the values of more than 1 and the health risk is high. The sequence of HI index values for heavy metals was obtained as  Pb>Cu>Cr> Fe> Zn> Cd> Ni. Evaluated risks from different pathways in children was HQing < HQinh<hqder while in adults follows HQing<hqder< HQinh process. Additionally, the values of enrichment factor of the studied samples showed the maximum and minimum values for Cu (4.3) and Ni (8.3), the maximum and minimum geoaccumulation index for Fe (12.75) and Ni (1.9) and the amount of integrated pollution and pollution index were estimated to be 1.34+E27 and 2.07+E9, respectively, indicating the average range for the studied heavy metals.</hq</hq

According to this study, the risk of non-carcinogenic risk of heavy metals (except Fe and Cu) for children is estimated to be higher than that of adults. Furthermore, the investigation of the CR index for the three carcinogenic heavy metals (cadmium, chromium, and arsenic) has exceeded the safe level, which indicates ingestion and inhale as the target pathways for the worst adverse effects of heavy metals in children andadults, respectively. In the present study, the amount of heavy metals studied is more than the set standards. The results of the current study showedthe more enrichment of heavy metals in the car filter as compared with  the cabin.

Nowadays, individuals spend a lot of time indoors; thus they are exposed to hazardous compounds including polycyclic aromatic hydrocarbons (PAHs) with teratogen, mutagen, and carcinogen potential. Therefore, this study was conducted to detect, and determine the content and source apportionment of PAHs in office building dust samples of Isfahan metropolis in 2023.

In this descriptive cross-sectional study, 84 indoor dust samples were collected from 28 sampling sites. After extraction of analytes, the gas chromatography/mass spectrometry (GC–MS) method was used to determine PAHs content in the samples. Molecular diagnostic ratios (MDRs) were used to determine the origin of PAH compounds. Furthermore, all statistical analyses were performed by SPSS software.

The results showed that 16 priority PAHs were detected in the office building dust samples with the minimum, maximum, and mean values (µg/kg) of 4575, 16589, and 9838. Moreover, based on the results obtained, the mean contents of NAPH, FLU, PHE, FULA, PYR, BaA, CHR, BbF, BkF, BaP, DahA, BghiP, and IcdP species were higher than the maximum permissible concentration (MPC) established by Iran DOE. The results of the MDRs method indicated that although PAHs originated from both pyrogenic and petrogenic sources, the pyrogenic sources had the main role in the pollution of office building dusts with PAHs.

Due to risks arising from exposure to PAHs, detection, determination of contents, source identification, and especially health risk assessment of PAHs in indoor dust of other closed places such as commercial, educational, and recreational buildings as well as households is recommended.

many countries have currently put waste management as a priority on the agenda and are seeking to enhance its effectiveness by encouraging public participation. Therefore, this study aimed to evaluate the willingness of rural residents to participate in waste management processes in Jajarm County, North Khorasan Province.

The survey research method was used. The target population consisted of 4031 households from 37 villages in Jajarm County. The dependent variable of willingness to participate in waste management was measured with 5 variables, including willingness to pay for waste disposal, willingness to use special containers, eagerness to separate waste at source, eagerness to deliver separated waste, and tendency to cooperate with rural development. The impact of independent variables on the five dependent variables was evaluated by running five logit functions.

The results of the models showed that age, education, regular waste collection by village councils, cooperation with rural cooperatives and organizations, payment for waste collection, familiarity with waste management methods, health effects of waste, familiarity with the harmful effects of waste, communication with extension agents and rural health liaisons, participation in waste management training classes, and satisfaction with the village council have a positive and significant (p≤0.05) impact on the willingness to participate in waste management.

Providing educational programs and introducing the consequences of non-separation of waste on human health and the environment is effective in attracting the participation of people in waste management plans and should be prioritized in waste management programs.

Water resources deficiency has caused the use of effluents to be considered as a source for re-use in the form of haloculture projects. An attempt has been made to investigate the possibility of using effluent produced by sugarcane production companies in the implementation of haloculture projects, from the viewpoint of the most used pesticides.

Ten water, four sediment, two plant, and two fish samples were analyzed using gas chromatography-mass spectrometry (GC-MS) and high-performance liquid chromatography (HPLC) to determine the concentration of pesticides. In order to assess the ecological risk, toxic unit (TU) and risk quotient (RQ) were calculated.

Glyphosate and Ametryn in all liquid, solid, and biological samples had concentrations below the detection limit. 2.4.D, Metribuzin, and Atrazine had detectable concentrations in the samples. However, their concentrations are lower than the standard values. Metribuzin and Atrazine had high concentrations in the stems and leaves of reeds in the region, which may indicate the role of these plants in the remediation of water and sediment from these compounds.

Using effluent from Amirkabir and Mirzakouchak Khan agro-industrial complexes to implement the haloculture project does not pose a particular problem from the viewpoint of contamination with the studied pesticides. This is confirmed due to the small concentrations of the studied compounds in the liver and below the detection limit in the muscles. However, it is necessary to carry out more studies to evaluate the quality of effluent in terms of the other types of pollution.

Smoking is one of the biggest public health problems in the world, which can increase the overall burden of disease in the world. Since understanding the factors related to smoking among medical students is considered an important and necessary factor for formulating and explaining educational intervention programs, therefore, this study was conducted determine the prevalence of smoking among students of Kashan University of Medical Sciences and the factors related to it.

This cross-sectional study was conducted on 681 students of Kashan University of Medical Sciences in the first semester of 2018 by simple random sampling. Smoking in individuals, family, close friends, and other demographic characteristics was measured using a questionnaire with good reliability and multiple logistic regression was used for statistical analysis.

The average age of the participants in this study (313 male and 368 female students) was 25 ±4.2 years old. The prevalence of smoking among students was 9.4% (16.7% in boys and 3.35% in girls). Also, smoking had a significant relationship with the desire to smoke, living in a dormitory, having close friends who smoke, and family members with a history of smoking (p<0.05).

The academic drop of students who smoke is significantly higher than other students. Since this study has shown the factors related to smoking in students, the use of these findings can be a basis for the prevention of smoking and the development of preventive interventions.

Today, cigarette butts have become one of the most significant forms of waste. This study aims to assess the level of cigarette butts pollution along the Guilan coasts and explore the factors influencing their distribution. Additionally, this study discusses experiences and management options related to this issue.

In this study, we implemented a standard sampling method adapted from the "NOAA Marine Debris Program" to collect samples from eight beaches. Each station yielded 18 square quadrant measuring 1 × 1 m2. We estimated the severity of cigarette butt pollution along the Iranian coastline and conducted a review of published articles on the harmful effects of cigarette butts.

The density of cigarette butts ranged from 0.22 to 2.11 items/m2. Bojagh National Park showed the lowest contamination of cigarette butts, while Bandar Anzali exhibited the highest. The results indicate an increase in cigarette butt pollution on beaches in densely populated cities compared to less developed coastal areas. Moreover, stations corresponding to tourist beaches and coasts with gentle slopes have a higher potential for cigarette butt accumulation. The level of cigarette butts pollution along the coasts of Bandar Anzali may be attributed to the extensive tourism activities on these beaches.

Given the high level of cigarette butt pollution on crowded coasts, it is imperative to identify beaches with a higher potential for waste accumulation and implement plans for coastal waste cleanup. Furthermore, effective management programs should be developed to promote cultural awareness and reduce cigarette butt contamination.

The economic evaluation is a tool for decision-making based on data that helps to select and prioritize waste management components and their implementation based on economic criteria. The purpose of this study was a comprehensive economic evaluation of the waste management components by life cycle costing assessment (LCC) , Net Present Value index (NPV), and Internal Rate of Return (IRR).

The cost of each waste management component, was calculated by LCC for one tonne of waste in. The efficiency of each waste management component was obtained using the NPV and IRR indicators.

The results showed that recycling with 260%, and then composting with 40%, have the highest economic returns and the ability to return capital. The sensitivity analysis showed the profitability of these two processes despite the changes of ±30% in the influential calculation parameters.

In this study, comprehensive economic evaluation showed that using LCC, NPV, and IRR with their sensitivity analysis, simultaneity can have an important role in waste management decision-making.