به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
فهرست مطالب نویسنده:

محسن حکیمی

  • محسن حکیمی

    این مقاله به بررسی تحلیلی مولفه های تئاتر روایی (اپیک) برتولت برشت در شیوه های اجرایی نمایش ایرانی تعزیه می پردازد. بیگانه سازی به این مفهوم است که بتوان مولفه های آشنا را از کنش نمایشنامه و یا شخصیت های آن دور کرد تا بتوان از این طریق روحیه انتقاد و سوال را در تماشاگر به وجود آورد. در بخش متغیر وابسته که مربوط به نمایش سنتی و آیینی تعزیه است، به تحلیل کنش های روایی تعزیه پرداخته خواهد شد. آنچنان که از مطالعه متغیر وابسته و متغیر مستقل تحقیق برمی آید، در تعزیه ناخودآگاه مشخصه هایی از تکنیک بیگانه سازی برشت دیده می شود. تحقیق حاضر به لحاظ روش، توصیفی-تحلیلی و از نظر شیوه گردآوری اطلاعات جزو تحقیقات کتابخانه ای است. همچنین تجزیه وتحلیل داده ها به صورت کیفی بوده و برای انتخاب آزمودنی ها از روش نمونه گیری غیرتصادفی استفاده شده است. یافته ها در این تحقیق نشان می دهد بین تکنیک فاصله گذاری برشت و شیوه اجرایی تعزیه قرابت نزدیکی وجود دارد؛ اما این شباهت ها ناشی از تاثیرگذاری یا دریافت تئوری برشت برای پدیدآورندگان تعزیه نیست؛ چراکه تعزیه در ذات تئاتری فاصله گذار است. به نظر می رسد می توان تعزیه را شکل ایده آلی از آنچه برشت در فاصله گذاری به دنبال آن بود، دانست.

    کلید واژگان: تکنیک فاصله گذاری, تعزیه, برشت

    This article deals with the analytical examination of the components of Bertolt Brecht's narrative (epic) theater in the performance methods of the Iranian performance of Taiziya. Alienation means that familiar elements can be removed from the action of the play or its characters in order to create a spirit of criticism and questioning in the audience. In the dependent variable section, which is related to the traditional and ritual performance of Ta'ziyeh, the narrative actions of Ta'ziyeh will be analyzed. As it can be seen from the study of the dependent variable and the independent variable of the research, characteristics of Brecht's alienation technique can be seen in the unconscious Tazia. In terms of method, the present research is descriptive and analytical, and in terms of the method of collecting information, it is a library research. Also, data analysis is qualitative and non-random sampling method was used to select subjects. The findings in this research show that there is a close relationship between Brecht's spacing technique and the implementation method of Ta'ziah, but these similarities are not caused by the influence or acceptance of Brecht's theory for the creators of Ta'ziah; Because Ta'ziyeh is a distance in theater nature. It seems that ta'ziyeh can be an ideal form of what Brecht was looking for in distancing.

    Keywords: Technique, Pacing, Tazzieh, Bresht
  • اعظم السادات قرقچیان، حسین محمدی منش*، سید رضا فانی، محسن حکیمی
    سیانید از جمله مواد سمی است که در پساب بسیاری از صنایع وجود دارد و راه های متفاوتی برای کاهش آن بررسی شده است، از جمله می توان به روش های اکسایش با ازن، تخریب با تابش پرتو فرابنفش، کلردار کردن قلیایی و تخریب با استفاده از پراکسید هیدروژن اشاره کرد. هر کدام از این روش ها دارای معایب و برتری های گوناگونی هستند اما از میان آن ها، جذب سطحی یک روش موثر و کارآمد محسوب می شود. از طرفی زیولیت ها که آلومینوسیلیکات بلورین و آبدار فلزهای قلیایی و قلیایی خاکی هستند، توانایی جذب کاتیون ها و آنیون ها را دارد. در این پژوهش، جذب سطحی یون سیانید از محلول های آبی با استفاده از زیولیت و عامل های موثر بر آن مورد مطالعه قرار گرفته است. برای تهیه محلول سیانید بر اساس روش استاندارد از نمک سدیم سیانید و برای تنظیمpH   از محلول های 1/0 مولار هیدروکلریدریک اسید و سدیم هیدروکسید استفاده شد. در این پژوهش، به بررسی عامل های اثر  pH اولیه محلول، اثر غلظت اولیه محلول، اثر مقدار جاذب، اثر زمان تماس و اثر دما بر جذب سطحی یون های سیانید با نانوجاذب زیولیت کلینوپتیلولیت پرداخته شد و پس از بررسی های انجام شده مقدارهای بهینه و مناسب هر یک از پارامترهای موثر (6pH=، غلظت اولیه محلول یون سیانید 150 میلی گرم در لیتر، مقدارجاذب یک گرم بر لیتر، زمان تماس 60 دقیقه و دما 22 درجه سلسیوس) که بیش ترین مقدار درصد جذب یون سیانید را دارا می باشد به دست آمد. تحت این شرایط بهینه، بیش ترین درصد جذب آنیون سیانید بر روی نانوجاذب زیولیت کلینوپتیلولیت 85 درصد به دست آمد. همچنین به بررسی رابطه بین داده های تجربی و معادله هم دماهای لانگمویر، فروندلیچ و تمکین پرداخته شد. مقدارR2  برای هم دماهای لانگمویر، فروندلیچ و تمکین به ترتیب 8337/0، 9837/0 و 99/0 به دست آمد که نشان می دهد بین داده های تجربی و هم دمای تمکین تطابق بیش تری نسبت به دو هم دمای دیگر وجود دارد.
    کلید واژگان: جذب سطحی, آنیون سانید, نانوجاذب زئولیت کلینوپتیلولیت, هم دما
    Azamsadat Ghoroghchian, Hossein Mohammadi-Manesh *, Seyed Reza Fani, Mohsen Hakimi
    Cyanide is one of the toxins and different ways to reduce it have been studied. These include ozone oxidation methods, ultraviolet radiation degradation, alkaline chlorination, and hydrogen peroxide degradation. Each of these methods has various disadvantages and advantages, but among them, surface adsorption is an effective and efficient method. On the other hand, zeolites, which are crystalline aluminosilicate and juicy alkali and alkaline earth metals, have the ability to absorb cations and anions. To prepare a cyanide solution, it was used sodium cyanide salt based on the standard method In this work, it has been studied the adsorption of cyanide ion from aqueous solutions using zeolite nanoparticles and the factors affecting on it. In this study, the factors of the effect of the initial pH of the solution, the effect of the initial concentration of the solution, the effect of the adsorbent amount, the effect of the contact time and the effect of temperature on the surface adsorption of cyanide ions with the nano-adsorbent zeolite clinoptilolite were investigated. And after the studies, the optimal and appropriate values for each of the effective parameters pH=6, contact time 40 min, adsorbent dosage 1g/l, temperature 22°C and initial concentration of 150 mg/l. Under these optimal conditions, the highest percentage of anion cyanide uptake was obtained on the nano-adsorbent of zeolite clinoptilolite 85%. The relationship between empirical data and the equation of Langmuir, Freundlich and Tamkin equations was also investigated. The R2 values for Langmuir, Frondelich, and Temkin's alliances were 0.8337, 0.9837, and 0.99, respectively, indicating that there was a greater match between the experimental data and the Temkin temperature than the other two.
    Keywords: Adsorption isotherms, Cyanide Anion, Surface adsorption, Nano-Adsorbent zeolite clinoptilolite
  • حمیدرضا افشار، محسن حکیمی *

    بازیگری مستلزم آموزش تکنیک و مهارت است. با پذیرفتن این مسیله که روش‌های آموزشی زیاد نیستند و تمام تیوری‌ها در طی یک قرن اخیر به «سیستم استانیسلاوسکی» ختم می‌شوند، بسیاری از مربیان، کارگردانان و پژوهشگران، روش‌ها را در هم می‌آمیزند تا به شیوه‌ای منحصربه‌فرد دست پیدا کنند. درست مانند تاثیری که لی استراسبرگ، استلا آدلر و سنفورد مایسنر از استانیسلاوسکی پذیرفتند و نحله‌ای جدید به‌نام متداکتینگ در آمریکا پایه‌گذاری کردند. از آنجا که هدف پژوهش حاضر بررسی تحلیلی خلق شخصیت براساس تکنیک‌های عملی تری شرایبر است، این سوال پیش می‌آید: شرایبر که ادامه‌دهنده‌ی سیر تکوینی متداکتینگ است چه راهکارهای جدیدی به بازیگران ارایه می‌دهد؟ در آموزش شرایبر درک این اصل مهم است که او به ترکیب دو مکتب فکری «مشی از درون به بیرون» و «چه می‌شود اگر...» باور دارد و اعتقاد دارد این دو، وسیله‌ای برای رسیدن به یک هدف را در خود جای داده‌اند؛ کمک به بازیگران تا ابزارهای خود را فعال کنند، بر نیروی تخیلشان بیفزایند و به‌این ترتیب توانایی خود را بسط دهند. شرایبر جعبه‌ای از ابزارهای مناسب در اختیار بازیگران قرار می‌دهد. یعنی تنوع بی‌نهایتی از تمرینات که به بازیگران کمک خواهند کرد تا شخصیت یک نقش را واکاوی کنند. هدف این است تا هر بازیگری «چگونه کار کردن» روی خودش را درک کند و به موفقیت دست یابد. دریافت شرایبر آن است که هر بازیگر‌ بسته به فردیتش به‌روشی متفاوت، می‌تواند نهایت استعدادهایش را شکوفا کند. او اعتقاد دارد نه سیستم، نه متد و نه هیچ تکنیک دیگری برای همه کاربرد یکسانی ندارند. پس بازیگر را به‌هیچ الگوی خاصی محدود نمی‌کند و بازیگرانی چندزبانه تربیت می‌کند، به این منظور که بازیگران با گسترش ابزارهای مهارتی و تکنیکی خود، اعتماد به‌نفس لازم برای بازی در هر موقعیتی را داشته باشند. بنابراین ابداع، خلاقیت، نوآوری همراه با خطر کردن مولفه‌ها‌ی مهم در فرایند آموزشی او هستند و مهم است که هر بازیگر رشد خلاقانه‌ای داشته باشد. شرایبر به اکتشافات و تجربیاتی پرداخته است که جزو ایده‌های نو در شصت سال اخیر آموزش بازیگری هستند. در چنین رویکردی تمامی کار کلاس در مورد بررسی، کشف و یادگیری است و ساختار تمرینات به‌هیچ عنوان تصادفی نیستند. این روش آموزشی به‌منظور آماده‌سازی کامل بازیگر برای حضور در فضای حرفه‌ای طراحی شده است؛ بازی با ترکیبی از عقل و غریزه. پژوهش حاضر، به روش توصیفی تحلیلی شیوه‌ی گردآوری اطلاعات کتابخانه‌ای انجام شده است. تجزیه و تحلیل داده‌ها به‌صورت کیفی است و برای انتخاب آزمودنی‌ها از روش نمونه‌گیری غیرتصادفی استفاده شده است.

    کلید واژگان: تکنیک بازیگری, تری شرایبر, آموزش و پرورش بازیگر
    Hamidreza Afshar, Mohsen Hakimi *

    Acting requires technical and skill training. Accepting the fact that there are not many educational methods and all theories end up with the “Stanislavsky system” during the last century, many teachers, directors and researchers mix methods to achieve a unique method. Just like the influence that Lee Strasberg, Stella Adler and Sanford Meissner received from Stanislavsky and founded a new method called method teaching in America. Since the aim of the current research is to analyze the character creation based on Terry Schreiber’s practical techniques, this question arises, what new solutions does Schreiber, who continues the formative process of teaching, offer to actors. In Schreiber’s education, it is important to understand this principle that he believes in the combination of two schools of thought, “Going from the inside out” and “what if...” and believes that these two contain a means to reach the same goal; Helping actors activate their tools, increase their imagination and thus expand their abilities. Schreiber provides actors with a box of suitable tools. It means an infinite variety of exercises that will help actors to analyze the character of a role. The goal is for every actor to understand “how to work” on himself and achieve success. Schreiber’s understanding is that each actor can develop his talents in a different way depending on his individuality. He believes that neither the system, nor the method, nor any other technique, have the same application for everyone. Therefore, it does not limit the actor to any specific model and trains multilingual actors. In order for the actors, by expanding their skill and technical tools, to have the necessary self-confidence to play in any situation. Therefore, invention, creativity, innovation along with taking risks are important components in his educational process and it is important that every actor has creative growth. Schreiber has discussed discoveries and experiences that are among the new ideas in the last sixty years of acting education. In such an approach, all the work of the class is about investigation, discovery and learning, and the structure of the exercises is not random in any way. This training method is designed to fully prepare the actor to appear in a professional environment. A game with a combination of intellect and instinct. The current research is in terms of descriptive-analytical method and in terms of the method of collecting library information. Data analysis is qualitative and non-random sampling was used to select subjects.

    Keywords: acting technique, Terry Schreiber, actor education
  • علیرضا ردائی*، محسن حکیمی، الهام هاشمی سروستانی

    فرضیه: 

    در سال های اخیر، استفاده از ماده مغناطیسی باریم فریت BaFe12O19 در ساخت آهنرباهای کامپوزیتی پلیمری توجه بسیار زیادی را جلب کرده است. در این پژوهش، آهنرباهای کامپوزیتی پلیمری لاستیک نیتریل بوتا دی ان-پلی (وینیل کلرید) (NBR-PVC) دارای پودر آلیاژ باریم فریت BaFe12O19 با ذرات کوچک تر از 5µm، با خواص بهینه ساخته شد.

    روش ها

    اثر مقدارهای مختلف پودر مغناطیسی باریم فریت در ماتریس پلیمری بر خواص مغناطیسی، شکل شناسی و مکانیکی آهنرباهای پلیمری باریم فریت با استفاده از عکس های SEM و نمودارهای VSM و آزمون کشش بررسی و مطالعه شد.

    یافته ها

    آهنرباهای کامپوزیتی NBR-PVC/BaFe12O19 شامل %70 وزنی NBR و %30 وزنی PVC ساخته شد که هر 100g لاستیک پایه دارای 2phr  گوگرد، 4phr روی اکسید، 3phr استیاریک اسید، 2phr  تترامتیل تیورام دی سولفید (TMTD) و 2phr  مرکاپتو بنزتیازیل دی سولفید (MBTS) و پودر فریت باریم  با اندازه ذرات کمتر از  5mm در ترکیب درصدهای مختلف به ترتیب به عنوان عامل پخت، فعال کننده، روان کننده، شتاب دهنده و عامل مغناطیسی بود. از میان نمونه های ساخته شده آهنرباهای کامپوزیتی N-P/F80 با نسبت 80/20 (پودر-پلیمر) دارای بیشترین مغناطش اشباع (Ms) و مغناطش باقی مانده (Mr) و کمترین مقدار وادارندگی ذاتی (Hc) بود. مطابق انتظار بهترین نمونه از لحاظ استحکام کششی نمونه N-P/F20 با نسبت (پودر-پلیمر) 20/80 بود و در نهایت با توجه به تمام نتایج مربوط به خواص مغناطیسی، شکل شناسی و مکانیکی نمونه ها، مناسب ترین نمونه مناسب از لحاظ پراکنش خوب ذرات در ماتریس پلیمری و استحکام کششی مناسب و خواص مغناطیسی مطلوب N-P/F50 نمونه با نسبت پودر-پلیمر 50/50 انتخاب شد.

    کلید واژگان: آهنربای کامپوزیتی, نمودار VSM, باریم فریت, لاستیک نیتریل بوتا دی ان, پلی (وینیل کلرید)
    Alireza Redaei *, Mohsen Hakimi, Elham Hashemi SarvesTani

    Hypothesis: 

    In recent years, much attention has been paid to the use of BaFe12O19 barium ferrite magnetic material in the manufacture of polymer composite magnets. Hence, nitrile butadiene rubber-polyvinyl chloride (NBR-PVC) polymer composite magnets containing barium ferrite alloy powder BaFe12O19 with particles less than 5 microns were made with optimal properties

    Methods

    The effect of different amounts of barium ferrite magnetic powder in the polymer substrate on the magnetic, morphological and mechanical properties of barium ferrite polymer magnets was investigated using SEM images and VSM diagrams and tensile test.

    Findings

    NBR-PVC/ BaFe12O19 composite magnets containing 70 %wt NBR and 30 %wt PVC with 100 units of base rubber (phr) including 2 units of sulfur as baking agent, 4 units of zinc oxide as activator, 3 units of stearic acid as lubricant, 2 units of tetramethyl thioram disulfide (TMTD) and 2 units of mercapto-benzythiazyl disulfide (MBTS) as accelerator and barium ferrite powder BaFe12O19 were fabricated with a particle size of less than 5 microns and a combination of different percentages as a magnetic agent. Among the samples made, N-P/F80 composite magnets with a ratio of 20:80 (powder:polymer) had the highest saturation magnetism of Ms and the residual magnetization of Mr and the lowest intrinsic coercivity of Hc. As expected, the best sample in terms of tensile strength was N-P/F20 with a powder:polymer ratio of 80:20, and finally, according to all the results related to the magnetic, morphological and mechanical properties of the samples, the most suitable one in terms of good particle dispersion in the polymer substrate and suitable tensile strength and appropriate magnetic properties of N-P/F50 with 50:50 (powder:polymer) ratio was selected.

    Keywords: composite magnet, VSM diagram, barium ferrite, nitrile butadiene rubber, Polyvinyl chloride
  • مهسا صفری*، محسن حکیمی
    در این پژوهش، ترکیبات هویسلر Co2FeX (X=Ge, Si) با 30 الکترون ظرفیت که با استفاده از روش های آلیاژسازی مکانیکی و ذوب قوسی ساخته شدند، مورد مطالعه قرار گرفتند. بلوری شدن نمونه ها در هر دو روش ساخت توسط داده های XRD تایید شد. نتایج نشان داد در مقایسه با Ge، حضور Si در ترکیب، نقش موثرتری در ایجاد نظم اتمی بلند برد داشته و بیشترین مغناطش اشباع برابر  24/5 مربوط به یکی از نمونه های ترکیب Co2FeSi است. با این وجود مقدار بدست آمده به واسطه تک بلور نبودن نمونه هنوز هم از مقدار پیش بینی شده توسط اسلیتر-پائولینگ کمتر است. تحلیل ریزساختار نشان داد Ge در تقویت هسته زایی بلوری در فرآیند آسیاب کاری موثرتر از Si  عمل کرده است. در صورتی که به واسطه دمای ذوب کمتر Ge نسبت به Si، رشد بلورک در فرآیند پخت با حضور Ge سرعت بیشتری گرفته است. وادارندگی بزرگ مشاهده شده در نمونه حاصل از فرآیند آسیاب کاری ترکیب Co2FeSi به ناهمسانگردی قابل توجه ناشی از نظم اتمی و همچنین حجم زیاد مرزهای بلوری به عنوان موانع حرکت دیواره حوزه ها ارتباط داده شد.
    کلید واژگان: آلیاژ هویسلر, مغناطش, نیم فلز, آسیاب کاری, وادارندگی, آلیاژسازی مکانیکی, ذوب قوسی
    M Safari*, M Hakimi
    In this study, the Co2FeX (X=Ge, Si) Heusler compounds with 30 valence electrons, which are made by using mechanical alloying and arc melting methods were studied. The crystallization of samples was confirmed by XRD data in both manufacturing methods. The results showed that the presence of Si than Ge in the compound played a more effective role to creation a large scale atomic ordering, and the maximum saturation magnetization is related to one of the Co2FeSi samples equal to 5.24 . However, the amount obtained is still less than the predicted value by the Slater-Pauling due to this fact that the sample isn’t single crystalline. The microstructure analysis showed that Ge has been working more effective than Si on the enhancement of crystalline nucleation in the milling process. Although the crystallite growth in the annealing process is more rapid in the presence of Ge due to the lower melting point of Ge than Si. The great coercivity observed in the milled sample of Co2FeSi compound was related to the significant anisotropy caused by the atomic ordering and also the large volume of crystallite boundary as barriers into wall movement of domains.
    Keywords: Heusler Alloys, Magnetism, Half Metal, Milling, Coercivity, Mechanical alloying, Arc melting
  • محسن حکیمی*، مهسا صفری
    در این پژوهش، با هدف بهبود ویژگی های مغناطیسی، ترکیب هویسلر Co2FeSi طی فرایندهای آزمایشگاهی مختلف ساخته شد. مقایسه ساختار بلوری نشان داد نمونه های ساخته شده به روش آسیاکاری نسبت به نمونه های ساخته شده از روش ذوب قوسی از نظم بلوری بهتری برخوردارند. پخت نمونه حاصل از آسیاکاری باعث بهبود نظم بلوری و درنتیجه دستیابی به بیشترین مغناطش اشباع برابر با μB/F.u. 24/5 شد. تفاوت در مغناطش اشباع سایر نمونه ها با توجه به مدل هسته- پوسته توضیح داده شد. بررسی رفتار وادارندگی با توجه به سازوکارهای فعال در این نمونه ها نشان داد کوچک شدن اندازه ذرات مهم ترین نقش را در افزایش وادارندگی در نمونه های آسیا شده دارد.
    کلید واژگان: آلیاژ هویسلر, نظم بلوری, مغناطش, هسته-پوسته, وادارندگی, آسیاکاری, ذوب قوسی
    M. Hakimi*, M. Safari
    In this study, the improvement of the magnetic properties of Co2FeSi Heusler compound was followed by the utilization of different experimental synthesizing procedures. Comparing the crystal structure showed that the milled samples had a higher crystalline order than the arc-melted ones. Annealing of the milled sample improved the crystalline order, resulting in the highest saturation magnetization (5/24 μB/F.u.). The difference in the saturation magnetization of the other samples was explained by the core-shell model. Comparison of the various coercivity mechanisms showed that the decrease in the size of crystallites played a key role in the higher value of the milled samples coercivity.
    Keywords: Heusler Alloys, Crystalline ordering, Magnetization, Core-shell, Coercivity milling, Arc-melting
  • محسن حکیمی، حمیدرضا افشار
    دراماتورژی مرحله ی نخست یک اجرا است که نه با متن آغاز می شود و نه با اتمام نمایش پایان می یابد. اهمیت استفاده از این اصطلاح برای باربا، در مرکز توجه قرار دادن کنش و تاکید بر فرآیند آماده سازی بازیگر است. دراماتورژی از این منظر، تکنیکی برای اجرای کنش های واقعی در جهان داستانی فضای صحنه ی دینامیک محسوب می شود. فضای دینامیک در طراحی صحنه، ترکیبی از نور، صدا و تصویر است. با این تفاوت که تکنولوژی نقش موثری در جنبه های تصویرسازی و ترکیب بندی ایفاء کرده و فضای اجرا را همانند فضای مونتاژ نشان می دهد. این موارد از ارکان مهم تئاتر پست مدرن شناخته می شوند. در این تئاتر تجهیزات الکترونیکی، به کمک کارگردان شتافته و به او انعطاف پذیری و حق انتخاب بیشتری می دهند. در این فضای نوین، برعکس فضای دو بعدی طراحی صحنه کلاسیک که با پیشروی رویدادها متوجه داستان می شویم، خط داستانی مشخصی وجود ندارد. به همین دلیل حرکات بدن بازیگر، برای بیان احساس یا داستان گویی نیست، بلکه برای تنظیم عناصر فعال اجرا در فضا است. با رشد روز افزون نمایش های بدون متن و با رویکردهای مختلف در حوزه ی مطالعات اجرا، بررسی رفتار و مناسبات بازیگر در این فضا ضرورت دارد. از این رو پژوهش با رویکرد پست مدرنی به دنبال چگونگی رابطه یا کنش بازیگر در جایگاه دارماتورژ با فضای صحنه ی دینامیک تئاتر پست مدرن است. هدف از طرح این سوال دست یافتن به معنای جدید رفتار و تکنیک بازیگر است. پژوهش حاضر، به لحاظ روش توصیفی-تحلیلی و از نظر شیوه‍ی گردآوری اطلاعات کتابخانه ای می باشد. تجزیه وتحلیل داده ها، به‍صورت کیفی بوده و برای انتخاب آزمودنی ها از روش نمونه‍گیری غیر‍تصادفی استفاده شده است. یافته ها نشان می دهد، فضای دینامیک نتیجه ی به وحدت رسیدن ابزار دیجیتال، رسانه، تکنولوژی و بدن است. در این فضا روابط جدیدی بین بازیگر و بدنش تعریف می شود، به این معنی که ارگان واحدی می سازند. بازیگر در تعریف جدید، بدن و صدایی است که در فضا هویت می یابد و به تنهایی چیزی جز بخشی از یک کل منسجم نیست.
    کلید واژگان: تئاتر پست مدرن, فضای صحنه ی دینامیک, دراماتورژی بازیگر
    Mohsen Hakimi, Hamidreza Afshar
    The first stage dramaturgy is a performance that begins not with the text and not ending the show. The importance of using this term for Barba is at the center of attention and emphasis on the actors’ preparation process. In this perspective, dramaturgy is a technique for realizing real actions in the world of storytelling of dynamic stage space. The dynamic space in the design is a combination of light, sound and image. With the difference that technology plays an effective role in the aspects of illustration and composition, it shows the space of execution as the assembly space. These are the most important pillars of the post-modern theater. In the theater, the electronic equipment, with the help of the director, is more flexible and more selective. In this new space, in contrast to the two-dimensional space of the classical design, with the advent of the events we noticed a story, there is no definite storyline. For this reason, the body movements of the actor are not to express feelings or storytelling, but to regulate active elements in space. With the increasing growth of non-text shows and with different approaches in the field of implementation studies, an examination of the behavior of the actor in this space is necessary. Therefore, the research with a post-modern approach to how the actor’s relationship or act as Darmathorr with the stage of the theater’s dynamic scene Postmodern The purpose of this question is to achieve the new meaning of acting and technique of the actor. The present study is descriptiveanalytical and in terms of collecting library information.
    The data analysis was qualitative and the non-random sampling method was used to select the subjects. The findings indicate that the dynamic space is the result of the unity of digital instruments, media, technology and the body. In this space, new relationships are defined between the actor and his body, which means that they create a unitary entity. The actor is in the new definition of body and sound, which identities in space, and is not merely part of a coherent whole.
    Keywords: postmodern theater, dynamic scene, actor dramaturgy
  • محسن حکیمی، پرویز کاملی، باقر اصلی بیکی، علی فقیه
    در این پژوهش نانوبلورهای فریت کبالت از بازپخت ترکیب آلیاژی Co-Fe حاصل از آسیاب کاری در اتمسفر هوا به دست آمد. تاثیر دمای بازپخت بر تشکیل فاز فریت کبالت و ویژگی های ساختاری و مغناطیسی محصول مورد مطالعه قرار گرفت. فاز یابی نمونه بازپخت شده در دمای 450 درجه سانتی گراد نشان داد که حدود 46درصد وزنی نمونه به فریت کبالت CoFe2O4 تبدیل شده است. این میزان در نمونه های بازپخت شده در دماهای 800 و 900 درجه سانتی گراد به ترتیب به 95 و 90 درصد می رسد. کاهش مغناطش اشباع نمونه با بازپخت به تبدیل فاز Co-Fe به فریت کبالت ارتباط داده شد. اثر اندازه دانه ها و کم شدن نسبت سطح به حجم منجر به یک افزایش در مغناطش اشباع نمونه 900 درجه سانتی گراد نسبت به نمونه 800 درجه سانتی گراد شده است. بیشترین وادارندگی در نمونه بازپخت شده در 800 درجه سانتی گراد مشاهده شد که کوچک بودن اندازه بلورک ها در این نمونه دلیل اصلی این افزایش نسبی است.
    کلید واژگان: آلیاژسازی مکانیکی, فریت کبالت, وادارندگی, نانوبلور
    M. Hakimi, P. Kameli, B. Aslibeiki, A. Faqeeh
    In this work, cobalt ferrite nanocrystallites were synthesized by air annealing of milled Co-Fe compound. Effect of annealing temperature on phase formation of cobalt ferrite and structural and magnetic properties of the product was studied. Analysis of annealed sample in 450 oC showed that around 46 weight percent of the specimen was changed to Co2FeO4. This value increased to 95 and 90% for 800 oC and 900 oC annealed samples respectively. Reduction of saturation magnetization under annealing was related to transformation of Co-Fe to cobalt ferrite. Increasing the value of saturation magnetization in 900 oC annealed sample compared to 800 oC one was attributed to decreased surface to volume ratio and crystallite size. The main reason of occurrence of maximum coercivity in 800 oC annealed sample was its low crystallite size.
    Keywords: Mechanical alloying, Cobalt ferrite, Coercivity, Nanocrystallite
  • رضوان سبحانی، محسن حکیمی، محسن خواجه امینیان، پرویز کاملی
    در این پژوهش فرایند تشکیل فاز نمونه های Mn2.5Ge از پودرهای فلزی Mn و Ge با روش آلیاژسازی و تاثیر بازپخت محصول نهایی مورد مطالعه قرار گرفته است. نتایج نشان داد فاز پایدار در فرایند آسیاب کاری، ترکیب Mn11Ge8 با ساختار اورتورومبیک و گروه فضایی Pnam است. مقادیر مغناطش اشباع نمونه های آسیاب کاری شده با زمان اسیاب از مقدار 2/0 تا 95/1 (kg-1Am2) افزایش می یابد. باقی ماندگی نمونه ها نیز با افزایش زمان آسیاب کاری افزایش و میدان وادارندگی نمونه ها با افزایش زمان آسیاب کاری کاهش یافته است. بازپخت نمونه 15 ساعت آسیاب کاری شده به حذف فازهای Mn و Ge و ظهور چهار فاز جدید Mn3Ge و Mn5Ge2 و Mn5Ge3 و Mn2.3Ge منجر شد، که فاز جدید Mn3Ge با ساختار) Do22 تتراگونال ( و گروه فضاییI4/mmm فاز پایدار و غالب است. افزایش مغناطش اشباع نمونه بازپختی به شکل گیری فازهای مغناطیسی جدید و افزایش میدان وادارندگی به فاز Mn3Ge با ساختار تتراگونال نسبت داده شده است. برای تعدادی نمونه که با روش ذوب قوسی ساخته شده بود، مطالعات توسعه یافت تا با مقایسه نتایج، تاثیر روش ساخت بر فرایند تشکیل فاز و ویژگی های ساختاری و مغناطیسی نیز مطالعه شود. در این نمونه ها بسته به روش ساخت، مقادیر مغناطش اشباع در بازه 6/0 تا 65/5 (kg-1Am2) قرار داشتند. تحلیل ریتولد نشان داد نمونه Mn2.5Ge ساخته شده به روشس ذوب قوسی که فرایند تکمیلی بازپخت در دمای 620 درجه سانتی گراد روی آن صورت گرفت، تک فاز است، که در نتیجه آن ترکیب Mn2.5Ge با مغناطش اشباع (kg-1Am2) 252/5 و میدان وادارندگی 005/0 تسلا به دست آمد.
    کلید واژگان: مغناطش, ساختار بلوری, هویسلر, منگنز, آلیاژسازی مکانیکی, ذوب قوسی
    R. Sobhani, M. Hakimi, M. Khajeh Aminian, P. Kameli
    In this paper, the phase formation process of Mn2.5Ge samples, prepared by mechanical alloying of Mn and Ge metal powders and annealing, has been studied. Results showed that in the milled samples the stable phase is Mn11Ge8 compound with orthorhombic structure and Pnam space group. The value of saturation magnetization increases by increasing milling time from 0.2 up to 1.95 (Am2Kg-1). The remanece of the samples increases by increasing the milling time while the coercivity decreases. Annealing of 15-hour milled sample results in disappearance of Mn and Ge and the formation of new phases of Mn3Ge, Mn5Ge2, Mn5Ge3 and Mn2.3Ge. Mn3Ge is the main phase with Do22 tetragonal structure and I4/mmm space group which is stable and dominant. The enhancement of saturation magnetization in the annealed sample is related to the formation of three new magnetic phases and the increase of coercivity is due to the presence of Mn3Ge compound with tetragonal structure. Studies were replicated on samples made by arc melting method to compare the results and to investigate the effect of the preparation method on phase formation and structural and magnetic properties of the materials. In these samples the saturation value was in range of 0.2 up to 1.95 (Am2Kg-1) depending on preparation methods. Rietveld refinement shows that Mn2.3Ge sample prepared from arc melted under 620oC anealing is single phase. Magnetic analysis of this sample show a saturation magnetization of 5.252(Am2Kg-1) and 0.005 T coercive field.
    Keywords: Magnetization, Crystal structure, Heusler, Manganese, Mechanical alloying, Arc melting
  • محسن حکیمی، حمیدرضا افشار، فاطمه شاهرودی
    خلق شخصیت نمایش در یک تعامل دو سویه بین بازیگر و کارگردان، و ارائه ی آن شخصیت به نحوی باورپذیر به مخاطب به مفهوم هدایت بازیگر است و به دو شیوه ی مرسوم صورت می گیرد. نخست از درون به بیرون و دوم از بیرون به درون. زندگی درونی و بیرونی یک شخصیت با تناقضات و تضادهای فطری اش، نقطه ی کانونی و مورد توجه اکثر کارگردانان و مربیان بازیگری بوده و برای هر کدام، وسیله ای که بیان کننده ی این تناقضات و تضادها باشد، بازیگر آموزش دیده می باشد. تمامی تئوری های مربوط به آموزش بازیگر در صد سال گذشته ملهم از نظریات استانیسلاوسکی ست که به سیستم شهرت دارد. زمانی-که «سیستم» وارد آمریکا شد به واسطه ی تاثیری که لی استراسبرگ، استلا آدلر و سنفورد مایسنر از استانیسلاوسکی پذیرفتند، به یک نحله ی جدید برای آموزش بازیگر تبدیل شد. بر این اساس «متداکتینگ» با اقتباس این سه نظریه پرداز از سیستم مصطلح شد. دهه های 1950 و 1960، این نظریه پردازان ادعا کردند که وامدار اصلی سیستم استانیسلاوسکی اند، و هر یک وجوه مختلف کار استانیسلاوسکی را به منظور نشان دادن رویکرد خود مورد استفاده قرار دادند. این پژوهش از طریق مقایسه ای تطبیقی، وجوه اشتراک، افتراق و موارد تاکید این سه نظریه پرداز را در روند تمرینات عملی هدایت بازیگر از درون به بیرون و از بیرون به درون مشخص می کند. یافته ها نشان می دهد، وجوه اشتراک این سه نظریه پرداز را می توان در مولفه هایی هم چون کنش توجیه پذیر، شرایط مفروض نمایش نامه، تاکید بر باورپذیر بودن رفتار بازیگر و بداهه پردازی در محرک و پاسخ جستجو کرد. از مهمترین وجوه افتراق این سه نظریه پرداز نیز می توان به مبحث اصالت بازیگر و اصالت نقش اشاره کرد.
    کلید واژگان: هدایت بازیگر, متداکتینگ, لی استراسبرگ, استلا آدلر, سنفورد مایسنر
    Mohsen Hakimi, Hamid Reza Afshar, Dr. Fateme Shahroudi
    Directing the actor means to create a character via interaction between actor and director and to present it as believable to the audience and it's done by two common methods. First from inside to outside and second from outside to inside. The focus of most directors and acting teachers are the inside and outside life of the character with his/her whole paradoxes and inherent contrasts and the means to show these characteristics that actors are trained for it. All the actor training theories of the past hundred years are inspired by Stanislavsky's theories which are known as system. When system entered America it became an inspiration for Lee Strasberg, Stella Adler and Sanford Meisener, which consequently led to Method acting and made it the bible for teaching actors. In 50's and 70's these theoreticians claimed that they took their idea from Constantin Stanislavsky's system and that each has used different aspects of Constantin Stanislavsky's theory to show their own approach. This study shows similarities, differences and emphasizing points of these three theoreticians in the exercise of directing the actor from inside to outside and from outside to inside by contrastive analysis. The results show similarities in elements such as acceptable action, assumed conditions of the play, emphasis on actor's believable behavior and improvising on stimulus-response and the most important difference are the arguments about actor's originality and character's originality.
    Keywords: directing the actor, Method Acting, Lee Strasberg, Stella Adler, Sanford Meisener
  • فریبا نظری، محسن حکیمی، حسین مختاری، امیرسجاد اسماعیلی
    در این پژوهش آسیاب کاری به عنوانی روشی برای ساخت آلیاژهایی دوتایی Mn-Ga و تاثیر آسیاب کاری بر فرایند تشکیل فاز نمونه های Mn:Ga با نسبت 2:1 و 3:1 در زمان های 1، 2 و 5 ساعت مورد مطالعه قرار گرفت. در نمونه های Mn:Ga با توجه به نتایج حاصل شده، ترکیب Mn1.86Ga با ساختار تتراگونال و گروه فضایی I4/mmm فاز پایدار بود و هم چنین مقادیری از ترکیب Mn3Ga با ساختار اورتورومبیک و گروه فضایی Cmca در محصول شناسایی شد. اثر افزودن Ge نیز با هدف جانشین کردن اتم Ge با اتم Ga ، با مطالعه در نمونه Mn:Ga:Ge با نسبت5/0: 5/0: 3 مطالعه شد. با این که بهبود ویژگی های مغناطیسی با افزودن Ge قابل انتظار است، اما برای نمونه مورد بررسی افزایش وادارندگی رخ داد و مغناطش اشباع نمونه تغییر محسوسی نداشت. افزایش Ge سبب از بین رفتن شانس تولید فاز نامتقارن اورتورومبیک Mn3Ga شد و در مقابل دو ساختار جدید Mn11Ge8 و MnGaGe در نمونه ایجاد شد. این تحول فازی با مطالعه رفتار مغناطیسی نمونه ها تایید شد. این رفتار می تواند از نیروهای نامتوازن الکترواستاتیک مرتبط با برهم کنش تبادلی منگنز در ترکیب ساختار اورتورومیبک Mn3Ga و جایگزین شدن برخی اتم های Ge با Ga ناشی شده باشد.
    کلید واژگان: آسیاب کاری, ساختار بلوری, خواص مغناطیسی, منگنز, گالیوم, ژرمانیوم
    F. Nazari, M. Hakimi, H. Mokhtari, A.S. Esmaeily
    In this paper, milling was investigated as a method for production of Mn-Ga binary alloys and the effect of milling process on phase formation of Mn:Ga samples with 2:1 and 3:1 ratio within 1, 2 and 5 hour milling times was studied. For Mn:Ga samples, according to the results, Mn1.86Ga compound with tetragonal structure and I4/mmm space group was a stable phase. Also, some amounts of Mn3Ga compound with orthorhombic structure and Cmca space group was observed in the Mn:Ga solution. The effect of Ge addition, with the purpose of replacing Ge with Ga was also studied in Mn:Ga:Ge (3:0.5:0.5) sample. Although improved magnetic properties is expected with the addition of Ge, but increasing the coercivity was occurred, and saturation magnetization did not change significantly in the studied sample. Ge addition caused elimination of the possibility of formation of asymmetric orthorhombic Mn3Ga phase. In return, two new structures of Mn11Ge8 and MnGaGe were appeared. This phase change was confirmed by studying magnetic behaviour of samples. This behavior can be caused by unbalanced electrostatic forces resulting from Mn-Mn exchange interaction in Mn3Ga orthorhombic structure and substitution of some Ge atoms with Ga.
    Keywords: Milling, Crystal structure, Magnetic properties, Mn, Ga, Ge
  • وحیدرضا زاهدی، پرویز کاملی*، محسن حکیمی، هادی سلامتی
    در این تحقیق آلیاژ حافظه پذیر فرومغناطیسNi50Mn34In16 با استفاده از روش آلیاژسازی مکانیکی ساخته شد. بررسی الگوی پراش پرتوی ایکس نمونه ها نشان داد که ساختار ترکیب در پایان ساعت دهم آسیاب کاری به طور کامل شکل گرفته و ادامه آسیاب کاری موجب ریزتر شدن اندازه دانه ها می شود. همچنین نقش بازپخت در بهبود ویژگی های آلیاژ مطالعه شد و مشخص شد که با بازپخت نمونه در دمای C°900 و سردسازی سریع آن می توان به ترکیبی با ساختار بلوری منظم L21 دست یافت. اندازه گیری پذیرفتاری متناوب مغناطیسی نشان داد که برای وقوع گذار مغناطیسی، بازپخت و سردسازی سریع نمونه آسیاب شده ضروری است.
    کلید واژگان: حافظه پذیری فرومغناطیس, آلیاژسازی مکانیکی, بازپخت, سردسازی سریع
    V.R. Zahedi, P. Kameli*, M. Hakimi, H. Salamati
    In this research, Ni50Mn34In16 ferromagnetic shape memory alloy has been prepared by mechanical alloying method. XRD patterns of the samples showed that after 10 hours of ball milling, the alloy structure was completely formed and continuing of the milling process led to more fine particle size. Also the role of annealing on improvement of the alloy properties was studied. It was found that the sample annealing at 900ºC followed by quenching improves the crystal structure and helps to reach L21 structure. Ac susceptibility measurements showed that for the occurrence of magnetic transition, annealing and quenching process on the ball milled powder is necessary.
    Keywords: annealing, ferromagnetic shape memory, mechanical alloying, quenching
  • فرزانه کرم پورراد، محسن خواجه امینیان *، محسن حکیمی
    برای ایجاد سفیدی سطح لعاب های سرامیکی ماده سیلیکات زیرکونیم (زیرکن) بصورت ذرات مجزایی در لعاب پخش می شود که با توجه به اختلاف زیاد ضریب شکست این ماده با ضریب شکست بدنه لعاب مقداری از نور تابیده را پراکنده و بازتاب می کند. قیمت بالای زیرکن باعث پژوهش هایی برای جایگزینی آن با مواد ارزان تر شده است. در این تحقیق تاثیر جایگزینی اکسیدهای منیزیم، کلسیم، آلومینیم و نیز سیلیکات آلومینیم بجای زیرکن در لعاب سرامیک بر خواص فیزیکی سطح مورد بررسی قرار گرفته است. برای بررسی تاثیر استفاده از این مواد بر ظاهر رنگی لعاب کاشی، طیف بازتاب نوری، شاخص سفیدی و پارامتر های رنگی در فضا رنگ CIEL*a*b* نمونه های مختلف اندازه گیری و با یکدیگر مقایسه شدند. همچنین برای مطالعه ساختار بلوری و ریزساختار سطح آزمایش های پراش پرتو X و میکروسکوپ الکترونی بر روی نمونه ها انجام شدند. نتایج نشان می دهد جانشین کردن بخشی از زیرکن با ترکیبات یاد شده در لایه پشت پوش کننده (انگوب)، شاخص سفیدی تقریبا برابر با نمونه مرجع (زیرکن کامل) را نتیجه می دهد. طیف بازتاب و جذب آب نیز نزدیک بودن نمونه جایگزین و نمونه مرجع را تایید می کند.
    کلید واژگان: زیرکن, انگوب, لعاب, پشت پوش کننده, پارامتر رنگی, شاخص سفیدی
    F. Karam Pourrad, M. Khajeh Aminian*, M. Hakimi
    To make a white surface of ceramic glazes, zirconium silicate (zircon) particles are dispersed in the glaze body. Due to the high difference between the refractive index of zircon particles and that of the glazed body, the surface of the glaze scatters and reflects most of the light. Since zircon is expensive, some research has been done to find a cost-effective alternative for it. In this paper zircon was substituted by CaO, MgO, Al2O3 and also aluminum silicate as frit in the ceramic glaze and the effects on the physical properties of the surface were studied. Some samples with these materials were prepared and the reflectance spectra, whiteness index and the color parameters in CIEL*a*b* color space were studied. To study the composition and microstructure of the samples SEM and XRD experiments were performed. The results shown the sample which some part of zircon in the opacifier layer (engobe) was substituted by new compounds, had almost the same properties as full zircon sample.
    Keywords: Zircon, Engobe, Glaze, Opacifier, Color parameter, Whiteness index
  • محسن حکیمی، محسن خواجه امینیان
    روش ذوب قوسی با فرآیند تکمیلی آسیاب کاری برای ساخت نمونه های Co2FeGa1+x(x=0،0/2)و Fe2CoGa1به کار گرفته شد. تاثیر افزودن اتم های غیرمغناطیسی گالیوم بر نظم بلوری و ویژگی های مغناطیسی دو ترکیب هویسلر Fe2CoGa و Co2FeGaو مطالعه شد. آنالیز رینولد نشان داد با آلایش Ga و تغییر استوکیومتری نمونه ها پارامتر شبکه افزایش یافته است. نتایج حاکی از وجود بی نظمی های جزئی در ساختار نمونه 2/1 Co2FeGaاست. ورود ابعاد بلورک ها به محدوده نانومتر به کمتر بودن ممان مغناطیسی ترکیب نسبت به پیش-بینی اسلیتر – پائولینگ منجر شد. ارتباط کاهش گشتاور مغناطیسی با افزایش گالیوم با تغییر ثابت شبکه و نظم بلوری اندازه بلورک ها توضیح داده شد. در نمونه Fe2CoGa مغناطش اشباع از مقدار پیش بینی اسلیتر – پائولینگ بزرگ تر به دست آمد. تضعیف مغناطش در نمونه Fe2CoGa1/2 با تغییر جزئی پارامتر شبکه با افزایش گالیوم ارتباط داده شد.
    کلید واژگان: ترکیبات هویسلر, خواص مغناطیسی, نظم بلوری, آنالیز ریتولد
    Hakimi, Khajeh Aminian
    Arc-melting with ball milling was used for preparing Fe2CoGa1+x and Co2FeGa1+x (x=0،0. 2) Heusler samples. Effect of extra nonmagnetic Ga atoms on lattice ordering and magnetic properties of Fe2CoGa and Co2FeGa Heusler compounds was studied. Rietveld refinement showed that lattice parameter of the samples increases in the presence of extra Ga atoms. Results showed that Co2FeGa1. 2 has a partial lattice disordering. Saturation magnetization of Co2FeGa sample was lower than Slater – Paulig prediction due to the crystallite size on a scale of nanometer. Reduction of saturation magnetization by increasing Ga atoms was explained through the change of lattice parameter، lattice ordering، and crystallite size. Saturation magnetization of Fe2CoGa sample was greater than Slater – Paulig value. Change of lattice parameter by increasing Ga atoms resulted a decrease of saturation magnetization in Fe2CoGa1. 2
    Keywords: Heusler alloys, magnetic properties, lattice ordering, Rietveld refinement
  • محسن حکیمی، پرویز کاملی، هادی سلامتی، مهین اشراقی، آزاده اعظمی

    در این مقاله پس از معرفی منگنایتها، تاثیر اندازه دانه ها و آلایش را بر خواص ساختاری، الکتریکی و مغناطومقاومت ترکیب منگنایت (LSMO) La1-xsrxmno3مورد بررسی قرار داده ایم. مشاهده می شود که با ریز شدن دانه ها مقدار مغناطومقاومت در میدانهای پایین، (LFMR) افزایش می یابد، همچنین دیده می شود که مقدار LFMR به ازای میدانهای اعمال شده برای آلایشهای پایین، با افزایش میزان آلایش، افزایش پیدا می کند و برای آلایشهای بالاتر، با افزایش میزان آلایش کاهش می یابد. تونل زنی وابسته به اسپین و پراکندگی اسپینی در مرزدانه ها توجیهی است برای افزایش LFMR در آلایشهای پایین، در حالی که کاهش LFMR برای آلایشهای بالاتر می تواند ناشی از تضعیف پدیده تبادل دوگانه به دلیل جانشینی جزئی یونهای آلایشی به جای یون mn باشد. ضخیم شدن بیش از حد مرزدانه ها نیز می تواند دلیل دیگری برای کاهش LFMR در آلایشهای بالاتر باشد

    کلید واژگان: منگنایتها, مقاومت مغناطیسی
    M. Hakimi, P. Kameli, H. Salamati, M. Eshraghi, A. Aezami

    In this paper after introduction of manganites, we have studied the effect of particle size and doping on structural, magnetic and magnetoresistance of LSMO manganite samples. The magnetoresistance measurements show that, by decreasing the particle size LFMR increases. Also the results show that the LFMR increases at low doping levels and decreases at high doping levels. The spin dependent tunneling and scattering at the grain boundaries is the origin of increasing the LFMR at low doping levels. Also the substitution of impurity ions at Mn sites and subsequently weaking of double exchange is responsible for decreasing of LFMR at high doping level.

سامانه نویسندگان
  • محسن حکیمی
    محسن حکیمی
    دانشجوی دکتری پژوهش هنر، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران
اطلاعات نویسنده(گان) توسط ایشان ثبت و تکمیل شده‌است. برای مشاهده مشخصات و فهرست همه مطالب، صفحه رزومه ایشان را ببینید.
بدانید!
  • در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو می‌شود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشته‌های مختلف باشد.
  • همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته می‌توانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
  • در صورتی که می‌خواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال