به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
فهرست مطالب نویسنده:

مهسا خرازی

  • رضا طلوعی، مهسا خرازی*
    پیشنهاد و توسعه ی الگوریتم های انتگرال گیری زمانی در پلاستیسیته مبتنی بر هایپرالاستیسیته یا هایپرالاستوپلاستیسیته به دلیل پیچیدگی های موجود مانند عینیت همواره مورد توجه پژوهشگران بوده است. با تجزیه ی تانسور گرادیان تغییر شکل به صورت ضربی، علاوه بر هیات های اولیه و کنونی یک هیات محلی به نام هیات میانی یا پلاستیک به وجود می آید که با به کارگیری آن برای انتگرال گیری های زمانی، نیازی به بررسی تاثیر چرخش های صلب در هیات کنونی نیست و عینیت تنش کوشی با وجود محاسبه آن از پارامترهای موجود در هیات میانی، نیاز به بررسی ندارد. همچنین با تجزیه ضربی تانسور گرادیان تغییر شکل پلاستیک می توان برای سخت شوندگی سینماتیک معادلات را به گونه ای استخراج کرد که نیازی به بررسی عینیت نباشد. بنابراین در این مقاله، الگوریتم ارائه شده برای مدل سطح سابلودینگ بر اساس هیات میانی با اعمال تغییراتی برای مدل فون میزز ارائه شده است. علت استفاده از مدل فون میزز سادگی این مدل نسبت به مدل سطح سابلودینگ و پرکاربرد بودن این مدل در مسائل کاربردی است. همچنین به لحاظ پیاده سازی عددی، مدل سطح سابلودینگ نسبت به مدل فون میزز دارای پیچیدگی های بیشتری است. بر این اساس، مسئله تغییر شکل برش ساده در کرنش های الاستیک کوچک و بزرگ با سخت شوندگی های همسانگرد، سینماتیک و ترکیبی در پلاستیسیته بررسی شده و نتایج به دست آمده از الگوریتم انتگرال گیری زمانی پیشنهادی با داده های آزمایشگاهی و نتایج مراجع متفاوت مورد مقایسه قرار گرفته اند. مقایسه نتایج و داده های موجود نشان می دهد که تطابق قابل قبولی بین نتایج وجود دارد و استفاده از این مدل در مسائل کاربردی می تواند مورد توجه قرار گیرد.
    کلید واژگان: پلاستیسیته مبتنی بر هایپرالاستیک، عینیت، الگوریتم انتگرال گیری زمانی، تغییر شکل برش ساده
    Reza Toluei, Mahsa Kharazi *
    TThe proposal and development of time integration algorithms in hyperelastic-based plasticity or hyperelastoplasticity, are consistently required due to complex issues such as objectivity. Through the multiplicative decomposition of the deformation gradient tensor, a local configuration known as the intermediate or plastic configuration is generated alongside the reference and the current configurations. Utilizing the intermediate configuration for time integrations eliminates the need to analyze the impact of rigid rotations in the current configuration. Moreover, as the Cauchy stress is derived from parameters in the intermediate configuration, there is no necessity to assess its objectivity. By employing the multiplicative decomposition of the gradient tensor of plastic deformation, equations for kinematic hardening can be derived, eliminating the need to verify objectivity. Therefore, in this article, the algorithm for the subloading surface model, based on the intermediate configuration, is derived by adapting the von Mises model. The rationale behind employing the von Mises model lies in its simplicity compared to the subloading surface model, along with its widespread usage. Additionally, in numerical implementation, the subloading surface model is more complex than the von Mises model. Building upon this, the problem of simple shear deformation with small and large elastic strains, incorporating isotropic, kinematic, and combined hardening in plasticity, has been investigated. The obtained results have been compared with the experimental data and findings from various references. The comparison between the results presented in this article and the available data indicates agreement, suggesting the viability of employing this model in practical applications.
    Keywords: Hyperelastic-Based Plasticity, Objectivity, Time Integration Algorithm, Simple Shear Deformation
  • سعید محمدزاده خسروشاهی، مهسا خرازی*، داود جلالی وجید

    فرآیند اکستروژن آلومینیوم روشی متداول برای تولید پروفیل های آلومینیومی با سطع مقطع ثابت و طول زیاد است. در فرآیند اکستروژن آلومینیوم اصطکاک یکی از مهمترین عوامل بوده و نقش بسیار مهمی دارد. اصطکاک روی شکل پروفیل خروجی، توزیع دما، نیروی اکستروژن و بسیاری دیگر از جنبه های مهم فرآیند تاثیرگذار است. یکی از روش های کنترل و کمتر کردن اصطکاک بین سطوح در فرآیند های مختلف استفاده از روانکار می باشد. هدف این مقاله بررسی تاثیر روانکار بصورت تغییرات ضریب اصطکاک بین سطوح مختلف در فرآیند اکستروژن آلومینیوم آلیاژ AA 6082 می باشد. برای این امر روش اجزای محدود با استفاده از نرم افزار تجاری DEFORM بکار گرفته شده و به منظور سنجش دقت نتایج بدست آمده، از مقادیر تجربی ارائه شده در مراجع استفاده شده است. نتایج بدست آمده نشان می دهد که با کاهش مقدار اصطکاک، نیروی اکستروژن مورد نیاز و دمای حداکثر قطعه کار به طور چشمگیری کاهش می یابد. همچنین شکل پروفیل خروجی با کاهش مقدار اصطکاک به علت کاهش اختلاف سرعت در نقاط مختلف پروفیل بهبود یافته و نقاط مرده جریان کاهش پیدا می کنند.

    کلید واژگان: فرآیند اکستروژن آلومینیوم، پروفیلهای آلومینیومی، اصطکاک، روانکار، روش المان محدود
    Saeed Mohammadzadeh, Mahsa Kharizi *, Davoud Jalali Vahid

    Aluminum extrusion processes is a common method for production of prismatic aluminum profiles with identical cross-section. In extrusion process, friction is one of the most important factors and it plays a crucial role in this process. Friction affects the output profile shape, temperature distribution, extrusion load and etc. One of the best methods to control and reduce the friction between different surfaces during extrusion process is using a lubricant. The aim of this paper is studying the effect of lubricant in aluminum extrusion process of the AA6082 alloy by employing the varying friction coefficient between interfaces. For this purpose the finite element analysis has been adopted by using the commercial DEFORM 3D finite element software and in order to verify the obtained results, the experimental results which are available in the literature have been used.The results show that, the friction reduction decreases the required extrusion force and maximum temperature of work piece significantly. In addition, by reducing the amount of friction between interfaces, the more uniform velocity distribution at the output profile is obtained which leads to improvement in the output profile shape and reduction in the dead metal zones.

    Keywords: Aluminum extrusion process, Aluminum profiles, Friction, Lubricant, Finite element method
  • حامد محمود سلطانی، مهسا خرازی*، حمیدرضا اویسی

    در این مطالعه، رفتار کمانش و پس کمانش صفحات کامپوزیتی دارای لایه های پیزوالکتریک تحت بارگذاری درون صفحه ای فشاری مورد بررسی قرار گرفته است. تاثیر میدان کوپل الکتریکی-مکانیکی بر روی رفتار پس کمانش و نقطه دوشاخگی در صفحات با لایه چینی عمودی و عمومی با استفاده از تئوری لایه ای مطالعه شده است. تئوری لایه ای استفاده شده در این مطالعه برای تحلیل صفحات کامپوزیتی با لایه های پیزوالکتریک بر مبنای تئوری مرتبه اول برشی استخراج و از اصل کمینه انرژی پتانسیل به منظور بدست آوردن معادلات تعادل استفاده شده است. معادلات تعادل غیرخطی بدست آمده با استفاده از الگوریتم تکراری نیوتن-رافسون حل شده است. همچنین به منظور بررسی دقت جواب های بدست آمده از روش پیشنهادی، از نتایج تحلیل اجزاء محدود سه بعدی استفاده شده است. در نهایت نتایج بدست آمده حاکی از همخوانی خوبی با نتایج حاصل از روش اجزاء محدود می باشد. نتایج بدست آمده نشان داد که موقعیت لایه های پیزوالکتریک تاثیر بسزائی در رفتار کمانش و پس کمانش صفحات کامپوزیتی دارد. همچنین در تعداد درجه آزادی بکار رفته در روش پیشنهادی نسبت به روش اجزاء محدود کمتر است که هزینه زمان محاسباتی را کاهش می دهد.

    کلید واژگان: کمانش، پس کمانش، پیزوالکتریک، ورقه کامپوزیتی، تئوری لایه ای
    Hamed Mahmoud Soltani, Mahsa Kharazi, Hamid Reza Ovesy

    In this study, the buckling and postbuckling behavior of composite laminates with piezoelectric layers subjected to compressive in-plane loading have been investigated. The effects of coupled electro-mechanical field on the postbuckling and bifurcation point in cross-ply and general lay-up sequences have been studied using layerwise theory (LWT). The LWT used in this study for analyzing the piezo-composite laminate is based on the assumptions of the first order shear deformation theory (FSDT). In order to obtain the equilibrium equations, the principle of minimum potential energy has been employed. The obtained nonlinear equilibrium equations have been solved using Newton-Raphson iterative algorithm. Furthermore, the three dimensional finite element analysis has been performed to examine the accuracy of the results obtained using the proposed method. The obtained analytical results are in good agreement with those achieved through the finite element analysis. Obtained results showed that, location of the piezoelectric layers have significant effect on the buckling and postbuckling behavior of the composite plates. Moreover, number of degrees of freedom which is used in proposed method are less than finite element method which, decreased the computational time cost.

    Keywords: Buckling, Postbuckling, Piezoelectric, Composite Laminate, Layerwise Theory
  • حامد محمود سلطانی، مهسا خرازی*
    یکی از مهم ترین دستاورد های روش اجزاء محدود معرفی المان های ایزوپارامتریک می باشد. در کنار کاربرد های زیاد این المان ها، المان های ایزوپارامتریک مرتبه پایین دارای مشکلاتی از قبیل قفل شدگی برشی، حجمی و مدهای جعلی انرژی صفر می باشند. مشکلات مذکور با افزایش تعداد المان ها و یا مرتبه المانی بهبود می یابد. از طرفی افزایش تعداد المان ها موجب بالا رفتن زمان محاسباتی می شود. بدین منظور استفاده از المان های مرتبه پائین دارای مد ناسازگار موجب افزایش دقت و کاهش زمان محاسباتی می-شود. هدف این مقاله، مطالعه و بررسی رفتار الاستوپلاستیک صفحات و تیرها با آلیاژ منیزیم، تحت بارگذاری یکنواخت محوری و خمشی با استفاده از المان های ناسازگار و مقایسه نتایج بدست آمده با المان های استاندارد می باشد. به منظور کد نویسی و تحلیل عددی صفحه و تیر از المان های سه بعدی هشت و بیست گرهی استاندارد و هشت گرهی ناسازگار و المان های دو بعدی چهار گرهی استاندارد و هشت گرهی ناسازگار استفاده شده است. نتایج بدست آمده نشان می دهد که استفاده از المان ها ناسازگار سه بعدی در همگرایی تغییرمکان ها تاثیر زیادی داشته و باعث کاهش زمان محاسباتی می شود. همچنین در خصوص تنش پلاستیک ون-میزز پس از همگرایی جواب ها تفاوت چشمگیری در نتایج المان های سازگار و ناسازگار دو بعدی دیده نمی شود.
    کلید واژگان: المان ایزوپارامتریک، المان ناسازگار، روش اجزاء محدود، تحلیل الاستوپلاستیک
    Hamed Mahmoud Soltani, Mahsa Kharazi *
    One of the most remarkable achievements of finite element method is introducing isoparametric elements. Although these elements are able to use in numerous applications, the lower order isoparametric elements make some difficulties such as shear locking, volumetric locking and hourglass. These issues may improve with an increase in the number of the elements or by increasing the order of the elements, which increases the computational time. Therefore for solving these problems, using the lower order elements with incompatible modes, which enhances accuracy and reduces the computational time, could be considered as an alternative solution option. The aim of this paper is to study the effect of using the incompatible elements on the elastoplastic behavior of isotropic plates and beams under uniform axial and bending loadings. For this purpose, 3D standard elements with eight and twenty nodes and incompatible eight-node elements are used in modeling the 3-D case studies. Besides, the 2D standard elements with four and eight nodes and incompatible ones with four nodes are employed to analyze the 2-D plane stress problems. The obtained results show that using 3D incompatible elements achieves the faster rate of convergence in the solution procedure for obtaining the displacement components and also makes significant run-time reduction. However, there are not any remarkable differences between the obtained plastic Von-Mises stresses using 2D standard and incompatible elements.
    Keywords: Isoparametric element, Incompatible element, Finite element method, Elastoplastic analysis
  • تحلل رفتار پس کمانش سازه های جدار نازک
    جمشید فضیلتی، مهسا خرازی
بدانید!
  • در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو می‌شود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشته‌های مختلف باشد.
  • همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته می‌توانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
  • در صورتی که می‌خواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال