معماری چندعملکردی
در نشریات گروه علوم سیاسی-
توسعه کالبدی فضایی شهر تهران در سده اخیر موجب گردیده تا بناهای صنعتی از محدوده هایی حاشیه ای به عرصه هایی محصور در بافت های فشرده شهری بدل گردند. این مسیله تعطیلی و رها شدن میراث معماری صنعتی را باوجود عمر مفید سازه و ارزش های معماری آن ها در پی داشته است. با واکنش نهادهای مختلف و در راستای ارتقای پایداری اقتصادی و اجتماعی، امکان اعطای کاربری جدید و احیا این ابنیه فراهم شده و مصادیقی از تجربه تطبیق پذیری در ایران شکل می گیرد که زمینه اصلی مطالعه در این تحقیق هستند. ازاین رو هدف از این پژوهش بررسی تجارب موفق معماری چند عملکردی و تطبیق پذیر جهانی و قیاس میان نمونه استراتژی های آن ها با تجارب مشابه در میراث صنعتی شهر تهران است. در این پژوهش مطالعات حوزه تطبیق پذیری بر روی نمونه های جهانی، به عنوان مبنای استخراج استراتژی های معماری چند عملکردی قرارگرفته است. استراتژی ها شامل سه لایه کالبدی سازه، تاسیسات و نما بوده که با روش دلفی بر روی میراث معماری صنعتی شهر تهران به عنوان جامعه آماری ارزیابی شده اند. تحلیل داده ها از طریق آزمون کوکران و آزمون فریدمن صورت گرفته و روش نمونه گیری برای هر دو جامعه آماری (میراث معماری صنعتی تهران) و (متخصصین مربوطه) نظریه ای می باشد. میراث معماری صنعتی شهر تهران شامل: کارخانه آرگو (موزه گالری آرگو)، پادگان ایرانشهر (خانه هنرمندان)، کارخانه جوراب بافی بریانک (موزه آثار طبیعی و حیات وحش هفت چنار) و زندان قصر (باغ موزه قصر) می باشند که با محاسبه میانگین رنک آزمون برای هر استراتژی در هر لایه، ابنیه منتخب رتبه دهی شده اند. با توجه به اجماع نظر متخصصین، وجود استراتژی های دو لایه سازه و نما در ابنیه موردبررسی، تایید و براساس نتایج آنالیز داده ها در لایه سازه، کارخانه آرگو بالاترین میزان از آزادی فضا را دارا بوده و در لایه نما خانه هنرمندان با بیشترین میانگین رنک آزمون بالاترین انطباق نما و سازه را داشته اند. اما در لایه تاسیسات، انطباق تاسیسات و سازه در نمونه های موردبررسی توسط متخصصین مشاهده و تایید نشده است. مطابق با نتایج این پژوهش، تمرکز سازه در کمترین نقاط و فضای آزاد بیشتر و همچنین انطباق نما با سازه دو مشخصه در بناهای صنعتی می باشند که می توانند تاثیر کارآمدی در فرایند تطبیق پذیری و اعطای کاربری جدید به میراث معماری صنعتی داشته باشند.
کلید واژگان: معماری چندعملکردی، میراث معماری صنعتی، تطبیق پذیری، اعطای کاربری جدید، تکنیک دلفیThis urban issue of terminating and ignoring such buildings as heritage of industrial architecture has caused the closure of this constructions, in spite of having an applicable life cycle and architectural principles; however, by some reactions from various institutions and to promote economic and social sustainability, the condition for having a new application and restoration these industrial buildings as a heritage is provided, which are examples of the experiences of adaptability in Iran as the main focus of this research. Therefore, the aim of this research is to review the successful experiences of multi-functional and universal adaptable architecture to compare their strategies with the heritage of industrial experiences in the city of Tehran. In this research, the studies of adaptability for universal samples are considered as the basis for exploring the multi-functional architectural strategies. The approaches include three physical layers of the building structure, facilities and facade, which have been evaluated by using Delphi method on the heritage of industrial architecture in city of Tehran as a statistical population. The non-parametric statistical tests of Cochran's Q test and Friedman's test, were applied to analyze data; the theoretical sampling method for both statistical population (Tehran's industrial architectural heritage) and (relevant experts) was adopted. According to the expert’s ideas, the strategies of two-layered structure and facade in the target buildings were confirmed; according to the data analysis, ‘Argo Factory’ had the highest Degrees of Freedom (df) regarding the structure layer, and in relation to the facade, the ‘Iranian Artists Forum’ with the highest average test rank, showed the highest conformity of the facade and the structure. However, regarding the facilities, no compliance of the facility was found. The industrial architectural heritage of Tehran includes some buildings that reused for another purpose as: Argo Factory (changed to Argo Contemporary Art Museum & Cultural Centre), Iranshahr Barracks (Iranian Artists Forum), Beryank Hosiery Factory (Haftchenar's Museum of Wildlife and Natural Monuments) and Qasr Prison (Qasr Garden Museum/ Museum of the Qasr Prison). The target buildings were ranked according to the data acquired by calculating mean rank for the strategies were applied for each layer. According to the results, two characteristics were found in the industrial buildings that can highly affect the adaptive reuse of the heritage of industrial architecture, 1. the concentration of the structure at the lowest points and limited spaces with more free spaces compared to its counterparts, and 2. the adaptation of the building facade to the structure.
Keywords: Multifunctional Architecture, Heritage of Industrial Architecture, Adaptability, Adaptive reuse, Delphi method
- نتایج بر اساس تاریخ انتشار مرتب شدهاند.
- کلیدواژه مورد نظر شما تنها در فیلد کلیدواژگان مقالات جستجو شدهاست. به منظور حذف نتایج غیر مرتبط، جستجو تنها در مقالات مجلاتی انجام شده که با مجله ماخذ هم موضوع هستند.
- در صورتی که میخواهید جستجو را در همه موضوعات و با شرایط دیگر تکرار کنید به صفحه جستجوی پیشرفته مجلات مراجعه کنید.