به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
جستجوی مقالات مرتبط با کلیدواژه

flowability

در نشریات گروه عمران
تکرار جستجوی کلیدواژه flowability در نشریات گروه فنی و مهندسی
تکرار جستجوی کلیدواژه flowability در مقالات مجلات علمی
  • سید محمد فرنام، عادل منصورپور، امید بامشاد، زهرا ملکی*
    در سال های اخیر متاکائولین به عنوان یک پزولان فعال با هدف بهبود خصوصیات کوتاه مدت و بلند مدت بتن بکار برده می شود. با توجه به اهمیت مقاومت فشاری و چسبندگی بین بتن و آرماتور در سازه های بتن آرمه، در این پژوهش یک روش جدید برای ارزیابی مقاومت چسبندگی بین بتن با آرماتور ارائه شده است. همچنین درصد بهینه متاکائولن همراه با الیاف فولادی به منظور دستیابی به حداکثر چسبندگی بتن با آرماتور و مقاومت فشاری بتن تعیین شده است. در این تحقیق، 20 طرح اختلاط مختلف با چهار درصد مختلف وزنی متاکائولن (%0،%10 ،%15 و 20%) و پنج درصد مختلف حجمی الیاف فولادی (0%، 75/0%، 1%، 5/%1 و 2%) ساخته شده و آزمایش اسلامپ بر روی بتن تازه و آزمایش های مقاومت فشاری و مقاومت چسبندگی بر روی نمونه های 28 روزه انجام شود. نتایج نشان داد روش جدید ارائه شده برای اندازه گیری چسبندگی بتن با آرماتور بسیار کاربردی می باشد. همچنین افزودن متاکوئن و الیاف فولادی ابتدا باعث کاهش قابل ملاحظه مقاومت فشاری می شود و سپس با افزایش درصد الیاف مقاومت فشاری افزایش می یابد و باز هم با افزایش درصد این مقدار کاهش می یابد. همچنین اضافه کردن پوزولان متاکائولن تا 15% بطور قابل ملاحظه ای مقدار مقاومت چسبندگی بتن را افزایش می دهد، اما با افزایش مقدار متاکائولن به 20%، مقاومت چسبندگی کاهش می یابد. از سوی دیگر، هر دو افزودنی متاکائولن و الیاف فولادی باعث کاهش روانی بتن تازه گردیده است. نهایتا نمونه حاوی 15% متاکائولن و 5/1% الیاف فولادی بیشترین مقاومت چسبندگی را نشان می دهد.
    کلید واژگان: مقاومت فشاری، مقاومت چسبندگی، الیاف فولادی، متاکائولین، روانی
    Seyed Mohammad Farnam, Adel Mansourpoor, Omid Bamshad, Zahra Maleki *
    In recent years, metakaolin is used in concrete to improve the short-term and long-term properties of concrete. Considering the importance of compressive strength and bonding between concrete and rebar in reinforced concrete structures, a new method for evaluating bonding strength between concrete and reinforcement is presented in this research. Also, the optimal percentage of metakaolin along with steel fibers has been determined in order to achieve maximum bonding and compressive strength. In this research, 20 different mixing designs with four different percentages of metakaolin (0%, 10%, 15% and 20%) and five different percentages of steel fibers (0%, 0.75%, 1%, 1.5% and 2%) were considered and slump test on fresh concrete and compressive strength and bonding strength tests on 28-day samples were conducted. The results showed that the new method presented for measuring the bonding strength between concrete and rebar is very practical. Also, minor addition of metakaolin and steel fibers significantly reduced the compressive strength, and by increasing the percentage of fibers, the compressive strength was increased and then decreased. Also, adding metakaolin up to 15% significantly increased the bonding strength of concrete, but by increasing the amount of metakaolin up to 20%, bonding strength of concrete was decreased. On the other hand, both metakaolin and steel fiber reduced the flowability of fresh concrete. Finally, the sample containing 15% metakaolin and 1.5% steel fibers showed the highest bonding strength.
    Keywords: Compressive Strength, Bonding Strength, Steel Fibers, Metakaolin, Flowability
  • Lawrence Tuleun *, Adeola Adedeji
    This study explores the impact of low carbon Rice Husk Ash (RHA) on the rheological and mechanical properties of mortar. RHA, sourced from Nigeria, underwent chemical analysis to ascertain its pozzolanic activity index. Rheological tests conducted on the mortar included standard consistency, initial and final setting times, as well as fresh density of mortar. While mechanical properties such as compressive, tensile, and flexural strength were assessed. Ordinary Portland Cement (OPC) was partially substituted with RHA at varying intervals with 0% RHA serving as the control. Compressive strength was measured after 7, 14, and 28 days of water curing, while tensile and flexural strength were evaluated at the 28th day. The water-to-binder ratio was fixed at 4.85, and binder-to-fine aggregate ratios of 1:2.36 and 1:2.76 were employed. RHA was classified as Class N, indicating high pozzolanic capacity. Results revealed increased consistency, initial and final setting times and a decreased density with RHA addition. The peak compressive strength was observed at 10% RHA, reaching 8.759 and 10.252 MPa for mix ratios 1:2.75 and 1:2.36, respectively. Moreover, at 10% RHA, flexural and tensile strength for mix ratio 1:2.36 exceeded those of plain mortar by 22.5% and 9.6%, respectively. In conclusion, the study highlights the significant role of RHA as a pozzolanic material in enhancing cementitious reactions in mortar systems, though the influence of RHA particle size was not considered.
    Keywords: Pozzolans, Compressive Strength, Tensile Strength, Mortar, Flowability
  • علی قربانی*

    بتن های خود تراکم با توجه به مزایای آن ها روز به روز در حال توسعه می باشند. در این بین بتن های توانمند نیز به دلیل ویژگی های مناسب مورد توجه محقین قرار گرفته اند. در این مقاله با استفاده از یک تحقیق آزمایشگاهی، مطالعه جامعی بر روی خصوصیات مکانیکی و کارایی بتن توانمند الیافی خود تراکم صورت گرفته است. در قالب این مقاله 9 طرح اختلاط ساخته شد. آزمایش های مقاومت فشاری، کششی، خمشی در بخش خصوصیات مکانیکی بر روی نمونه ها انجام شد. در بخش کارایی، آزمایش حلقه J انجام شد و همچنین آزمایش تعیین سرعت امواج آلتراسونیک به منظور بررسی کیفیت ساخت نمونه ها انجام شد. مطابق با نتایج به دست آمده تاثیر الیاف بر مقاومت کششی و خمشی به مراتب بیشتر از مقاومت فشاری بود. از طرفی افزودن الیاف تاثیرات منفی بر روی کارایی و سرعت امواج داشت. در نهایت نیز روابطی به منظور محاسبه مقاومت کششی و خمشی نمونه ها بر حسب مقاومت فشاری ارایه شد.

    کلید واژگان: مقاومت فشاری، مقاومت کششی، بتن خود تراکم، کارایی
    Ali Ghorbani *

    Using self-compacting concrete is being developed due to its advantages. Also, the high-performance concrete has attracted a lot of researcher attention because of its special characteristics. In this research, a comprehensive experimental investigation is performed on the mechanical and flowability of high-performance self-compacting concrete. In this article, nine mix compositions were cast and tested. In mechanical properties part, the compressive strength test, splitting tensile strength and flexural strength test were done on the specimens. In the durability and flowability part, J-Ring and ultra-sonic pulse velocity (UPV) tests were conducted on the specimens. According to the results, the effects of fiber on tensile and flexural strength was significantly more than the compressive strength. On the other hand, the addition of fibers had negative effects on the workability and UPV results. Finally, to calculate the tensile and flexural strength of specimens versus compressive strength, the relationships were proposed.

    Keywords: Compressive strength, tensile strength, Self-Compacting Concrete, Flowability
  • Hossein Kouhsari, Morteza Madhkhan *
    Cement grouts have extensive use in the repairing of cracks in structural and non-structural concrete and masonry, soil stabilization, etc. but for some applications, they need some modification in properties. Laboratory studies on the properties of cement grouts and the modification of these properties can pave the way for the greater use of these materials in applications such as the sealing of leachates of dangerous wastes buried at low depths, filling cracks in concrete bodies, etc. This study investigated the effect of silica fume, nano silica, nano bentonite, and superplasticizer on the physical and chemical properties of cement grout. For this purpose, 36 mixed designs in two separate groups for silica fume and nano silica were created. Then, the properties of fresh and hardened grout including flowability, bleeding, and 7, 28, and 90-day compressive strength were measured. The results showed that while nano bentonite and nano silica are effective in reducing bleeding, silica fume has a greater effect on this phenomenon. The greatest strength improvement was observed in the design containing silica fume and nano bentonite (CSB). While nano bentonite alone does not significantly improve the compressive strength of the grout, its combination with silica fume and nano silica has a notable positive impact on the compressive strength and bleeding of this mixture.
    Keywords: Grout, Silica Fume, Nano Silica, Nano Bentonite, Flowability, Bleeding, Compressive Strength
  • محسن جعفری ندوشن*، علی اکبر رمضانیانپور
    ژئوپلیمرها، پلیمرهای آلومینو سیلیکاتی هستند که از فعالسازی قلیایی مواد اولیه حاوی سیلیسیوم و آلومینیوم به دست می آیند. هدف اصلی این مطالعه، بکارگیری روباره کوره آهنگدازی دانه ای بعنوان ماده پایه برای ساخت خمیرهای ژئوپلیمری و بررسی و مقایسه خواص خمیرهای سیمان ژئوپلیمری ساخته شده با خمیر سیمان پرتلندی می باشد. خواص مکانیکی و دوامی ژئوپلیمرها با مواد پایه مختلف هنوز کاملا شناخته نشده است. در این میان مطالعه عوامل موثر بر خواص این مصالح به منظور دستیابی به بالاترین مقادیر خواص مکانیکی و کمترین هزینه ضروری می باشد. در این راستا اثر نوع و غلظت محلول قلیایی و نوع و مقدار سیلیکات سدیم روی کارآیی خمیر تازه و خواص مکانیکی خمیرهای سیمان ژئوپلیمری حاوی روباره کوره آهنگدازی بررسی شده و مناسب ترین ترکیب فعالساز برای ساخت خمیرهای سیمان ژئوپلیمری تعیین شده است. نتایج نشان می دهد که افزودن سیلیکات سدیم به مخلوط خمیر سیمان ژئوپلیمری با پایه روباره باعث افزایش پخش شدگی خمیر تازه و همچنین افزایش مقاومت فشاری می گردد. علاوه بر این در خمیرهای سیمان ژئوپلیمری با پایه روباره، مقدار بهینه مدول سیلیکات سدیم برای رسیدن به حداکثر مقاومت فشاری برابر با 33/2بوده و نسبت بهینه سیلیکات سدیم به محلول قلیایی برابر با 4/0می باشد. همچنین مقاومت فشاری 91روزه طرح بهینه خمیر سیمان ژئوپلیمری با پایه روباره بالغ بر 74% بیش از مقاومت فشاری 91روزه خمیر سیمان پرتلندی بوده است.
    کلید واژگان: ژئوپلیمر، روباره، فعالساز، مقاومت فشاری، پخش شدگی
    M. Jafari Nadoushan *, A.A. Ramezanianpor
    Geopolymers are alumino-silicate polymer that formed by alkali activation of Si and Al rich materials. This paper describes the effects of different alkaline solution types and concentrations, modulus of sodium silicate and sodium silicate to alkaline solution ratio on the flowability and mechanical properties of alkali activated slag and the optimum activator has been determined for the slag- based geopolymers production.Results reveal that adding the sodium silicate largely enhances the workability and compressive strength of slag-based geopolymer paste.The optimum modulus of sodium silicate and sodium silicate to alkaline solution ratio to reach the maximum strength are 2.33 and 0.4 respectively. At 91 days of curing, the compressive strength of the optimum mixture of slag- based gepolymer is about 74 % more than the compressive strength of ordinary Portland cement paste.
    Keywords: Geopolymer, Alkali Activated Slag, Activator, Compressive Strength, Flowability
  • حسن افشین، لیلا معراجی، کریم عابدی
    بتن پودری واکنش پذیر (RPC) به عنوان نوعی بتن فوق توانمند، در سال های اخیر توجه زیادی را به خود جلب کرده است. این بتن با مقاومت فشاری حداقل 150 مگاپاسکال، دارای تراکم حجمی بالا، نفوذپذیری بسیار کم، دوام زیاد، مقاومت سایشی و خوردگی بسیار بالایی می باشد. الیاف فولادی ریز به کار رفته در این بتن، باعث افزایش مقاومت خمشی و شکل پذیری زیاد آن شده است. در این تحقیق سعی شده است با استفاده از مصالح موجود در کشور بتوان به این نوع بتن دست یافت و مناسب ترین مصالح را از بین مصالح در دسترس، انتخاب نمود. همچنین تاثیر انواع روش های عمل آوری بر خواص این بتن بررسی شده است. نتایج نشانگر این نکته است که با استفاده از مصالح موجود و به کار بردن الیاف و با عمل آوری گرمایی می توان به مقاومت فشاری حدود 160 مگاپاسکال و مقاومت خمشی 25 مگاپاسکال در این نوع بتن دست یافت.
    کلید واژگان: بتن پودری واکنش پذیر، عمل آوری، روانی، مقاومت فشاری، مقاومت خمشی، طاقت خمشی
    Reactive powder concrete (RPC), as a new type of ultra-high-performance concrete, has attracted a lot of attention in recent years. This type of concrete with a compressive strength of more than 150 MPa, has high packing density, very low permeability, superior durability and very high abrasion and corrosion resistance. Small steel fibers, used in RPC, cause the increase of flexural strength and ductility. In the present study, it has been tried to produce reactive powder concrete using the most suitable available materials in Iran. Also, the effects of different curing methods on the properties of RPC have been investigated. The results show that using the available materials together with steel fibers and conducting heat treatment, reactive powder concrete with compressive strength up to 160 MPa and flexural strength of 25 MPa was produced.
    Keywords: Reactive Powder Concrete, curing, Flowability, compressive strength, flexural strength, toughness
نکته
  • نتایج بر اساس تاریخ انتشار مرتب شده‌اند.
  • کلیدواژه مورد نظر شما تنها در فیلد کلیدواژگان مقالات جستجو شده‌است. به منظور حذف نتایج غیر مرتبط، جستجو تنها در مقالات مجلاتی انجام شده که با مجله ماخذ هم موضوع هستند.
  • در صورتی که می‌خواهید جستجو را در همه موضوعات و با شرایط دیگر تکرار کنید به صفحه جستجوی پیشرفته مجلات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال