به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
جستجوی مقالات مرتبط با کلیدواژه

ft-ir

در نشریات گروه پزشکی
  • Saeed Mohammad Soleymani, Rahim Mombeini, Anayatollah Salimi *
    Background
    Cetirizine is a second-generation antihistamine with anti-allergy and anti-itching properties. The topical formulation of this medicine is used in androgenic alopecia treatment. Due to the hydrophilic nature of cetirizine, its skin absorption is negligible, so to increase its absorption, various enhancers were examined to see which can be used in the design of a topical formulation.
    Methods
    First, the skin was exposed to enhancers, including eucalyptus, menthol, Tween 80, propylene glycol, and oleic acid, for 1 or 2 hours. Then, the permeability parameters of the cetirizine solution and the structural changes of the skin after exposure to enhancers were analyzed by differential scanning calorimetry (DSC) and Fourier-transform infrared spectroscopy (FTIR) techniques.
    Results
    The obtained results show that all used enhancers increased the permeability of the drug cetirizine compared to water. Various mechanisms, such as liquefaction of lipids, destruction of lipid structure, and irreversible denaturation of intracellular keratin, are involved in the increase in drug penetration caused by eucalyptus, mint, Tween 80, propylene glycol, and oleic acid.
    Conclusions
    The results showed that among the studied absorption enhancers, eucalyptus and Tween 80 had the strongest, and propylene glycol had the weakest absorption enhancement effect after 2- and 1-hour pre-contact, respectively.
    Keywords: Enhanced Absorption, Skin Permeability, Cetirizine, DSC, FT-IR
  • Saeed Mohammad Soleymani, Anayatollah Salimi *, Heibatullah Kalantari, Adel Sheykhi
    Background

    Caffeine is an edible chemical compound obtained from various plants, such as tea and coffee. Caffeine is an alkaloid that is highly hydrophilic and has limited skin permeability. The lipophilic nature of the stratum corneum is a major barrier to the passage of this substance through the skin. Topical drug delivery systems can effectively transfer caffeine to the skin.

    Objectives

    This study investigated the effect of pretreatment time with chemical enhancers on caffeine’s skin permeation.

    Methods

    The skin was subjected to additives such as sodium lauryl sulfate, sodium lauryl ethyl sulfate, tynoline, nanoxinol, and lecithin for 5, 15, and 30 minutes. Then, the parameters of caffeine permeability and structural changes in the skin due to additive adsorption were studied using Fourier Transform Infrared (FT-IR) spectrometry.

    Results

    The enhancers increased the permeation of caffeine through the skin. There are different mechanisms for penetration enhancers, including lipid liquefaction, disruption of lipid bilayers, and irreversible denaturation of intracellular keratin.

    Conclusions

    Sodium lauryl sulfate can affect the skin permeability of caffeine.

    Keywords: Enhancing Absorption, Skin Permeability, Caffeine, FT-IR, Sodium Lauryl Sulfate
  • Seyed Morteza Hosseini, Namdar Yousofvand*
    Objectives

    One of the application areas of nanobiotechnology is the use of silver nanoparticles (Nanosilver particles) for a new solution in medical treatments. In the present study, the researchers investigate the effect of nano silver particles of the aqueous extract of Artemisia aucheri on skin wound healing among male rats.

    Material and Methods

    After creating wounds in 48 rats, they were randomly divided into 6 groups. Treated with 0.2% AgNPs ointment, 0.2% AgSO4 ointment,   0.2% A. aucheri  ointment, 3% tetracycline ointment, Eucerin basal ointment, and untreated control group. The tested groups were treated for ten days.

    Results

    Treatment with AgNPs ointment significantly increased the amount of vascular contraction, hexose amine and hydroxyproline, and fibrocyte and fibrocyte to fibroblast ratio. Also, in the mentioned group, the wound area and the total number of cells, neutrophils and lymphocytes decreased significantly compared to other groups. 

    Conclusion

    The nano silver particles of the aqueous extract of A. aucheri accelerate the healing process of skin wounds and reduce the time required for complete wound healing.

    Keywords: Ocimum Basilicum Leaf, Zn Nanoparticle, FT-IR, Anxiety, Light, Dark Transition Test, Mice
  • حامد رمضانی اول ریابی، سید علیرضا حاجی سید میرزاحسینی*، علی فیروزی چاهک، علیرضا محمدزاده، جلیل ایمانی هرسینی
    زمینه و هدف

    پلاستیک های پلی اتیلن امروزه به معظل بزرگ بهداشت محیط یعنی تولید بی رویه پسماند تبدیل شده است و محیط زیست را به خطر انداخته است. ولی حشرات به کمک محیط زیست آمده است و در این میان شب پره بزرگ موم خوار (Galleria mellonella) قادر است به کمک میکروبیوم معده در مرحله لاروی خود، پلاستیک پلی اتیلن، پلی استر، فویل آلومنیوم و حتی ماسک های پارچه ای را هضم کند. این مطالعه نیز با هدف بررسی توانایی لاروهای گالریا ملونلا در حذف پلاستیک پلی -اتیلن طراحی شد.

    مواد و روش ها

    ابتدا لاروهای گالریا ملونلا از خرداد ماه 1401 از زنبورستانهای عسل شهرستان گناباد- خراسان رضوی، جمع آوری شد. لاروها در آزمایشگاه حشره شناسی پزشکی دانشگاه علوم پزشکی گناباد با غذای موم و مصنوعی در باکس های پلاستیکی و در اتاقک های تاریک (دما 2±25 و رطوبت 33%) پرورش یافتند. برای تغذیه لاروها از پلاستیک های فریزری، زباله و فروشگاهی (اصطلاحا دسته دار) قطعات فیلم پلاستیک به قطر (10×10 سانتیمتر) برش زده شد و بر روی 10 پتری دیش به قطر(8×8 سانتیمتر) حاوی 10 لارو گذاشته شد و روی فیلم های پلی اتیلن یک پتری دیش دیگر (دارای سوراخ جهت تنفس لاروها) قرار گرفت. بیوماس تولید شده لاروهای مربوط به هر نوع پلاستیک جداگانه با دستگاه اسپکترومتری مادون قرمز تبدیل فوریه (FT-IR) آنالیز شدند.

    یافته ها

    آنالیز 8 نوع زیست توده تولیدی تغذیه لاروها از موم (کنترل) در مقایسه با پلاستیک های پلی اتیلن (مورد هدف) با FT-IRگروه های عاملی C-CL، C=O، C=C، R-OH، CH2، -C-C- که نشانه تخریب پلاستیک پلی اتیلن است را آشکار کرد. همچنین مقایسه میزان حذف پلاستیک در بین لاروهای تغذیه شده بر روی انواع فیلم پلی اتیلن اختلاف معنی داری (P<0.05) را مشخص کرد.

    نتیجه گیری

    لارو گالریا ملونلا به عنوان یک روش بیولوژیک، در آینده می تواند در حذف پلاستیک از طبیعت موثر باشد.

    کلید واژگان: Galleria mellonella، پلاستیک پلی اتیلن، زیست توده، هضم پلاستیک، FT-IR
    Hamed Ramezani Awal Riabi, Seyed Alireza Hajiseyed Mirzahosseini *, Ali Firoozi Chahak, AliReza Mohammad Zadeh, Jalil Imani Harsini
    Background and purpose

    Today, polyethylene plastics have become a big problem of environmental health, i.e. excessive production of waste, and it has endangered the environment. But insects have come to the aid of the environment, and in the meantime, the large wax-eating moth (Galleria mellonella) is able to digest polyethylene plastic, polyester, aluminum foil, and even fabric masks with the help of the microbiome of its larva's stomach. This study was also designed to investigate the ability of G. mellonella larvae to remove polyethylene plastic .

    Materials and methods

    First, G. melonella larvae were collected from Gonabad honey apiaries in June 2022. The larvae were reared in the Gonabad University of Medical Sciences medical entomology laboratory with beeswax and synthetic food in plastic boxes and dark rooms (temperature 25±2 oC and humidity 33%). To feed the larvae, pieces of plastic film were cut into diameters (10×10 cm) from the freezer, garbage, and shopping bag (so-called with handles) and placed on ten Petri dishes with a diameter of (8×8 cm) containing ten larvae. Another petri dish (with a hole for larvae to breathe) was placed on the polyethylene films. The produced biomass of larvae related to each type of plastic was analyzed separately with Fourier transform infrared spectrometry (FT-IR).

    Results

    Analysis of 8 types of biomass produced by larvae feeding from wax (control) compared to polyethylene plastics (target item) with FT-IRIt revealed functional groups C-CL, C=O, C=C, R-OH, CH2, -C-C-, which is a sign of polyethylene plastic degradation. Also, the comparison of the amount of plastic removal among the larvae fed on different types of polyethylene film revealed a significant difference (P<0.05).

    Conclusion

    G. melonella larvae as a biological method can be effective in removing plastic from nature in the future.

    Keywords: Galleria mellonella, Polyethylene plastic, Biomass, Digestionplastic, FT-IR
  • Anayatollah Salimi, Eskandar Moghimipour, Shadi Kashani, Saeed Mohammad Soleymani *
    Background

     This study aimed to examine the uptake of the model therapeutic agent, minoxidil, through the skin, under the influence of different vehicles. Therefore, the effect of different penetration enhancers such as Propylene glycol, water, ethanol, transcutol P, caprylic acid, and Isopropyl alcohol were evaluated on skin permeability of minoxidil through rat skin.

    Methods

     The skin permeability of minoxidil on rat skin was analyzed through a Franz cell by evaluating the parameters, including Jss, ERflux, ERD, and ERp. The enhancement mechanisms were studied by comparing FT-IR peak intensities for asymmetric and symmetric C-H stretching, ester C=O stretching, and Amide peaks. The mean transition temperature (Tm) and their enthalpies (ΔH) were investigated by the DSC technique.

    Results

     Caprylic acid had the highest diffusion coefficient enhancement ratio (ERD), followed by propylene glycol and water. All solvents have ERD flux enhancement ratio. Solubility in the stratum corneum limited partitioning. All carriers enhanced drug permeability from rat skin, according to FTIR and DSC.

    Conclusions

     Caprylic acid is an effective topical vehicle for minoxidil due to greater partitioning and diffusion through rat skin.

    Keywords: Minoxidil, Penetration Enhancers Transdermal Drug Delivery, DSC, FT-IR, Permeation
  • Anayatollah Salimi, Behzad Sharif Makhmalzadeh, Ghazal Davood Baharvandi, SaeedMohammad Soleymani*
    Background

    Piroxicam is a non-steroidal anti-inflammatory medication for treating fever, discomfort, and inflammation. In addition, piroxicam inhibits cyclooxygenase and lowers prostaglandin synthesis, resulting in analgesic and anti-inflammatory effects.

    Objectives

    This study used Franz diffusion cells made from rat skin primed with sesame, eucalyptus, olive, menthol, clove, and sunflower oils.

    Methods

    Control was hydrated rat skin. Permeability measurements include steady-state flux (Jss), permeability coefficient (Kp), and diffusion coefficient (D). FT-IR was used to compare changes in peak position, differential scanning calorimeter (DSC), mean transition temperature, and the permeability enhancement methods of the penetration enhancer (Tm). The skin acted as a barrier to piroxicam permeability throughout the whole surface, indicating that drug flux was limited by diffusion into the skin.

    Results

    The steady-state flux (Jss) of all penetration enhancers were not significantly different from control, except for clove and menthol oil (4 hours treated) and olive oil (2 and 4 hours treated).

    Conclusions

    Penetration enhancers improved drug permeability through rat skin. Sesame oil, menthol oil, and sesame oil were found to have higher ERflux, ERD, and ERP ratios than water-hydrated skin due to lipid fluidization, lipid structure disruption, and irreversible keratin denaturation.

    Keywords: Piroxicam, Percutaneous Absorption, Herbal Enhancers, DSC, FT-IR
  • Sankara Rao Miditana *, Siva Rao Tirukkovalluri, Imandi Manga Raju, A. Bangaru Babu, A. Ramesh Babu

    TiO2-based nanomaterials are very effective for water and air purification and act as good antibacterial agents due to their unique physicochemical properties. TiO2 is a promising nanocatalyst because of its non-toxicity, chemical stability, and low cost. The wide band gap and rapid electron-hole recombination limit its performance which can be overcome by doping with metals and non-metal ions. Metal doping improves the trapping of electrons to inhibit electron-hole recombination and non-metal doping reduces the bandgap of TiO2. These doped TiO2 materials can be synthesized by different routes like the Sol-gel method, hydrothermal method, precipitation method, impregnation method, etc. Among these, the Sol-gel method is reported as the best and most accurate for the synthesis of TiO2 particles in the nano scale range. Because it allows the incorporation of dopant ions at the molecular level with homogeneity and high chemical purity. The structural, morphological, and optical properties of as-synthesized TiO2 nanocatalysts can be well characterized by XRD, SEM, EDX, FT-IR, UV Vis-DRS, TEM, BET, and PL. In this review article, we would like to discuss the advantage of the Sol-gel method over other preparative methods of TiO2 nanomaterials and experimental techniques related to their characterization.

    Keywords: TiO2 nanomaterials, Sol-gel Method, photocatalyst, SEM, FT-IR, UV-DRS
  • Anayatollah Salimi, Eskandar Moghimipour, Payam Kogani, Saeed Mohammad Soleymani *
    Octyl methoxycinnamate is one of the ingredients in sunscreen products. The main aim of this study was to investigate the effect of different enhancers of in vitro skin permeability of Octyl methoxycinnamate. Octyl methoxycinnamate permeability parameters were evaluated through the whole skin of the rat with and without chemical enhancers including eucalyptus oil, urea, menthol and olive oil by Franz cell diffusion. The effects of enhancers on skin structure were also studied using DSC and FT-IR techniques. The skin prevented the permeability of Octyl methoxycinnamate so that after 24 hours less than 3% of the substance passed through the skin. The results of this study showed that by increasing the time, it is possible to increase the skin permeation and the highest rate of skin absorption were corresponded to olive oil (ERflux=63.074), eucalyptus oil (ERflux=48.78) and menthol (ERflux=33.5), respectively while the least amount of skin absorption was related to urea (ERflux=29.53). Chemical penetration enhancers are substances that interfere with the complex structure of the skin and protein lipids. Two endothermic transitions were obtained at about 67 (Tm1) and 112 ° C (Tm2) in thermogram of the hydrated whole rat skin. Tm1 and Tm2 seems to be due to the melting of the lipids and the irreversible intracellular keratin or melting of the lipid-protein (keratin) complex, respectively. The amount of Tm1, ΔH1 and ΔH2 were decreased by all penetration enhancers compared to the hydrated skin. The FT-IR results suggested the mechanism of increasing absorption effect by lipid fluidization and lipid extraction. All of penetration enhancers used in this study significantly increased the skin permeability of Octyl methoxycinnamate.
    Keywords: Octyl methoxycinnamate, skin permeability, Penetration enhancers, differential scanning calorimetry, FT-IR
  • آتنا رفیعی پور، محسن عسگری، منصور آذری*، فائزه عباس گوهری
    زمینه و هدف
    روغن های معدنی از مشتقات نفت هستند که در فرایندهای فلزکاری مورد استفاده قرار می گیرند. در سالهای اخیر توجه به کیفیت تصفیه روغن های معدنی منجر به تغییراتی در حدود مجاز مواجهه آن شده است. مطالعه حاضر با هدف مقایسه دو روش طیف سنجی مادون قرمز تبدیل فوریه و ماوراءبنفش در تعیین مقدار روغن های معدنی طراحی شده است.
    روش بررسی
    روغن های معدنی در دو شکل نو و استفاده شده از فرایند فلزکاری تهیه شد. پس از تعیین دانسیته، دو نوع روغن در غلظت های یکسان(دامنه غلظتی μg/sample10-2250) بر روی فیلترهای استرسلولزی اسپایک شد . تتراکلریدکربن و پنتان سرد به ترتیب به عنوان حلال استخراج کننده برای FT-IR و UV استفاده شدند. پارامترهای اعتباربخشی شامل دقت، صحت، حد تشخیص و حد تعیین کمی در هر دو روش بررسی شد.
    یافته ها
    دامنه غلظتی قابل تشخیص در دو روش FT-IR و UV به یکدیگر نزدیک بودند. ضریب تغییرات درون روز و برون روز برای روغن نو در روش های FT-IR وUV به ترتیب برابر 04/5، 57/3 و 16/6 و 01/6 و برای روغن های استفاده شده به ترتیب 12/5 و 21/5 و 36/6 و 13/6 درصد به دست آمد. درصد بازیافت دو روش تفاوت معنی داری نداشت(461/0=P). حد تشخیص روغن های معدنی نو و استفاده شده در روشFT-IR و UV به ترتیب برابر با 61/2، 22/2 و83/7، 74/7 و حد تعیین کمی به ترتیب 2/8، 3/7 و 84/25 و 55/25 μg/sample به دست آمد.
    نتیجه گیری
    روش FT-IR در مقایسه با روش UV از دقت بالاتری در تشخیص روغن های معدنی برخوردار می باشد. نتایج آزمون های اعتباربخشی نشان داد که هر دو شیوه می توانند همانند روش های NIOSH برای اندازه گیری روغن های معدنی استفاده شوند.
    کلید واژگان: روغن های معدنی، طیف سنجی، ماوراءبنفش، مادون قرمز تبدیل فوریه، پارامترهای اعتباربخشی
    Athena Rafieepour, Mohsen Asgari, Mansour Azari *, Faezeh Abbas Gohari
    Background And Aims
    Mineral oils are petroleum derivatives used in metalworking processes. In recent years, considering the carcinogenicity of less refined mineral oil, two separate threshold limit values considered in recent years. The present study designed to compare the spectrometry methods of Fourier Transform Infrared (FT-IR) and ultraviolet (UV), for analysis of mineral oil.
    Methods
    Mineral oils in two different refinement classes were prepared from metalworking processes. Then after determination of density, two types of mineral oils were spiked into Cellulose Ester filter at the same concentration (concentration range: 10-2250µg/sample). Carbon tetrachloride and cold pentane as extraction solvent was used for FT-IR and UV, respectively. Validation parameters including precision, accuracy, detection and quantitation limit were evaluated in both methods.
    Result
    Detectable concentration ranges of FT-IR and UV methods were close to each other. Intra-day and inter-day coefficients of variation in highly refined oil in FT-IR and UV methods was 5.04, 3.57 and 6.16, 6.01 percent, respectively, and for poorly refined oils in 5.12, 5.21 and 6.36, 6.13 percent respectively. The recovery rates of the two methods was not significantly different (P= 0.461). LOD and LOQ for highly and poorly refined mineral oils in FT-IR and UV analytical methods were 2.61, 2.22 and 7.83, 7.74, and 8.2, 7.3 and 25.84, 15.55 µg/sample, respectively.
    Conclusion
    FT-IR compared to UV method, has higher precision for analysis of the mineral oils. According validating parameters of this study, FT-IR and UV methods can be used as an alternative to NIOSH methods in the measurement of mineral oils.
    Keywords: mineral oil, spectroscopy, UV, FT-IR, validation parameter
  • Zeena Husseina_Adeeb A Al-Zubaidy_Hayder B Sahib *

    The aim of the study was to identify the antiangiogenic activity of Phoenix dactylifera seeds methanolic extract in vivo and the probable anti-angiogenic mechanism of action. The date seeds were extracted with methanol using cold method, the crude extract was tested on chick chorioallantoic membrane (CAM) as an in vivo anti-angiogenic assay. The phytochemical analysis was carried out using Fourier transform infrared spectroscopy FT-IR and Gas chromatography mass spectrometry GC-MS analysis. The results showed significant inhibition of blood vessels growth, while the phytochemical analysis showed the presence of different chemicals including phenolic compounds, terpene, fatty acids, aliphatic alcohols and others. From the data above the mechanism of action may relate to the presence of the above named compounds, as they have direct perturbing action on blood vessels and prevent cell proliferation of endothelial cells growth via their potent antioxidant and anti-inflammatory effects.

    Keywords: CAM assay, FT-IR, Angiogenesis, Phoenix dactylifera, in vivo study, vascular endothelial growth factor, Antioxidant, natural compounds
  • Vikas Gopalrao Rajurkar *, Sagar M. Shirsath
    The green synthesis of 5-(4-aminophenyl)-4-aryl-4H-1,2,4-triazole-3-thiol was achieved in four steps, In first step, 4-amino benzoic acid refluxed in ethanol along with catalyst Conc. Sulphuric acid to produce ethyl-4-amino benzoate I. Further compound I refluxed with hydrazine hydrate in ethanol to produce 4-amino benzohydrazide II. Compound II refluxed in ethanolic potassium hydroxide with carbon disulfide to produce 5-(4-aminophenyl)-1,3,4-oxadiazole-2-thiol III. Compound III refluxed in ethanol with different substituted primary aryl amine gave title compounds 5-(4-aminophenyl)-4-aryl-4H-1,2,4-triazole-3-thiol IVa-o. The compounds obtained were identified by FT-IR, 1H-NMR, GC- mass spectroscopy data, and elemental analysis and also screened for in-vivo antimicrobial activity. In vitro antibacterial activity was carried out against organisms like E.coli. K.pneumonia, S.aureus, and B.subtilis as well as in vitro antifungal activity were carried out against organisms like A.niger and S.cerevisiae. In vitro antimicrobial evaluation, the most potent broad spectrum compound IVc, IVd and IVf were found significant agent against standard drug Norfloxacin and Ketoconazole.
    Keywords: Triazole, Antimicrobial, MIC, FT-IR, 1H-NMR, GC-MS
  • Vikas Gopalrao Rajurkar *, Amol Radhakishan Pund

    The synthesis of 4-(substituted benzylidene)-2-(pyrazin-2-yl) oxazol-5(4H)-one was achieved in two steps, In first step, pyrazine-2-carboxamide  dissolved in EtOH, 10% KOH solution with ClCH2COOH produced compound 2-(pyrazine-2-carboxamido) acetic acid (II) and in second step, compound (II) in (CH3CO)2O with aromatic aldehyde, and catalyst potassium acetate produced title compounds 4-(substituted benzylidene)-2-(pyrazin-2-yl) oxazol-5(4H)-one (PA1-PA14). All the newly synthesized compounds structure were elucidated using various spectral techniques viz. FT-IR, 1H-NMR, GC-MS spectroscopy, and CHN elemental analysis data and screened for in vitro antimicrobial and antifungal activity. In vitro anti bacterial activity was carried out against organisms E.coli, K.pneumonia, S.aureus, and B. Subtilis as well as antifungal activity were carried out against A.niger and S.cerevisiae activity byminimum inhibitory concentration method. The most promising broad spectrum compounds PA3, PA4, and PA5 were observed and study data reveals that additions of different functional groups had varying effects on activity. In addition, the greater biological activities were observed when the electron-withdrawing groups like fluorine, bromine and chlorine were incorporated at p-position of the phenyl ring.

    Keywords: Antimicrobial, Linezolid, MIC, 1, 3-oxazolone-5-one, FT-IR, 1H-NMR
  • Azadeh Ashtarinezhad, Ataollah Panahyab, Baharak Mohamadzadeh Asl, Hossein Vatanpour, Farshad H. Shirazi *

    Miconazole is an imidazole antifungal agent, commonly applied topically to the skin or mucous membranes. The aim of this study was to examine the alternative method for gaining mechanism or the bimolecular changes caused by the possible teratogenic effects of Miconazole on mice fetus brain tissue using FTIR-Microspectroscopy. The mice were injected with Miconazole (60 mg/Kg) on gestation day 9. Fetuses were dissected on day 15 of gestation and morphological and histological studies on the fetus were carried out. Sections (10 μm) of control and Miconazole treated fetus brain tissue were used for FTIR measurement in the mid- infrared region. The results were shown by spectra 2nd derivative and also subtracting from control spectra. A lower intensity in the lipid (2800–3000 cm-1) and amid I (1600–1800 cm-1) regions of Miconazole treated mice fetus brain tissue was observed compared to the control mice fetus brain tissue. No major spectral shifting was observed at amide I band, amide II band and nucleic acid regions. As a conclusion, FTIR-Microspectroscopy can be a useful tool for teratogenic measurement with a unique ability to identify the modified bimolecular structures in mice fetus tissues.

    Keywords: Antimicrobial, Linezolid, MIC, 1, 3-oxazolone-5-one, FT-IR, 1H-NMR
نکته
  • نتایج بر اساس تاریخ انتشار مرتب شده‌اند.
  • کلیدواژه مورد نظر شما تنها در فیلد کلیدواژگان مقالات جستجو شده‌است. به منظور حذف نتایج غیر مرتبط، جستجو تنها در مقالات مجلاتی انجام شده که با مجله ماخذ هم موضوع هستند.
  • در صورتی که می‌خواهید جستجو را در همه موضوعات و با شرایط دیگر تکرار کنید به صفحه جستجوی پیشرفته مجلات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال