Investigation of Reactive Power Control Effects on Flicker and Harmonics Emission of a DFIG Wind Turbine

One of the most important power quality aspects in wind farms is voltage fluctuation or flicker which should be investigated due to the nature of wind speed variations. These variations result in power and voltage fluctuations at the load bus. Moreover، the wind generation systems may be assumed as a harmonics source because of their power electronic converters. There are numerous factors that affect flicker and harmonic emission of grid-connected wind turbines during continuous operation، such as wind characteristics (e. g. mean wind speed، turbulence intensity)، type of generator and grid conditions (e. g. short circuit capacity، grid impedance angle). In this paper، an IEC based flickermeter is first modeled and then a variable speed wind turbine has been simulated by Matlab/Simulink software. The flicker and harmonics emissions of wind turbines equipped with DFIG during continuous operation and using output reactive control are investigated. The simulation results show that control of wind turbine output reactive power is an effective means for flicker mitigation during continuous operation. However، there should be a compromise between flicker reduction and harmonics level increase to enhance the whole power quality of wind turbine.