Comparative evaluation of different surfaces fit of digitally fabricated cobalt-chromium copings in two depth of finish lines

Despite the increasing application of intra-oral scanners, the effect of finish line position on gingival margins adaptation is still discussed. The purpose of this clinical study was to evaluate the fitness of cobalt-chromium copings obtained from intraoral scanning in two depth of finish lines. Thirty teeth prepared for single premolar metal-ceramic crowns were included. Fifteen teeth had supragingival and fifteen had sub-gingival finish lines. Digital impressions were made using an intraoral scanner (Trios-3shape). Computer-aided design and computer-aided manufacture (CAD/CAM) cobalt-chromium copings were fabricated from the scan files. The copings were evaluated intraorally and after adjustments, the internal and marginal discrepancy were measured using silicone replicas and a stereomicroscopy. Internal and marginal discrepancies were analyzed using the Multivariate test (P<0.05). The mean internal and marginal gap were 52.1 and 56.27μ, for supragingival group and 49.72 and 62.98μ for subgingival group, respectively. The evaluation of finish line position showed no significant effect on obtained results (P>0.05). CAD/CAM chrome-cobalt copings fabricated by digital impressions provided acceptable marginal and internal precision. However, the finish line position had no significant effect on the internal and marginal adaptation.