Optimization of Coating Dimethoxydimethylsilane Using Plasma Enhanced Chemical Vapor Deposition (PECVD) on Coated Paper with Ethylene Vinyl Alcohol
Message:
Abstract:

In this study, EVOH was coated on paper made of CMP pulp by extrusion method in order to improve the paper's barrier properties of oxygen transmission. Ethylene vinyl alcohol (EVOH) shows poor moisture resistance despite less gas permeability. Then, dimethoxydimethylsilane was deposited using Plasma Enhanced Chemical Vapor Deposition on EVOH film as the hydrophobic layer. A random factorial experiment was designed with three factors at three levels including time (6-8-10 min), pressure (30-0400-500 m Torr), and radio frequency power (50-70-90 W). The contact angle, oxygen transmission rate, tensile strength, and strain energy were measured to obtain the optimum condition. Expert Design method using response surface was used to optimize the condition coating Dimethoxydimethylsilane in order to improve the hydrophobic properties, reduce OTR, increase tensile strength and strain energy. Based on this method the optimum condition was suggested as: time 6 min, pressure 499.99 m Torr and power 50W. Keywords: Extrusion , Contact angle, Oxygen transmission rate, Response Surface methodology.
Article Type:
Research/Original Article
Language:
Persian
Published:
Iranian Journal of Wood and Paper Science Research, Volume:34 Issue:1, 2019
Pages:
100 - 111
magiran.com/p1974493  
روش‌های دسترسی به متن این مطلب
اشتراک شخصی
در سایت عضو شوید و هزینه اشتراک یک‌ساله سایت به مبلغ 300,000ريال را پرداخت کنید. همزمان با برقراری دوره اشتراک بسته دانلود 100 مطلب نیز برای شما فعال خواهد شد!
اشتراک سازمانی
به کتابخانه دانشگاه یا محل کار خود پیشنهاد کنید تا اشتراک سازمانی این پایگاه را برای دسترسی همه کاربران به متن مطالب خریداری نمایند!