DATA-BASED PROBE FOR BEARING BALLS USING DESIGN EXPERT WITH BIODEGRADABLE MEDIA
Author(s):
Message:
Abstract:
This paper discusses about the lapping process for both metallic and non-metallic materials. The experiments were carried out based on the RSM design of experiments (DOE) approach to investigate the effect of their parameters on the lapping quality of ball bearing, for predicting the new results. This study explored the modification for fine finishing of bearing balls through Biodegradable medium (Aloe Vera) and silicon carbide (SiC) powder as an abrasive in addition of conventional oil-based media having an advantage like Antioxidant, antibacterial, non–toxic, good compression, and shear stresses. Spindle speed (rpm), Time (minutes), Force (N), Abrasive concentration were considered as the input process variables while the PISF, MRR and surface Roundness was considered as the process response. The result shows the most significant parameter for maximum PISF of 82.3%, 7.6 mg/min MRR and 9.05μm roundness was achieved with 672 rpm at 7.5 N force, 37.5% abrasive concentration, 165 minutes experimental run time, was achieved.
Article Type:
Research/Original Article
Language:
English
Published:
International Journal of Advanced Design and Manufacturing Technology, Volume:12 Issue:3, 2019
Pages:
43 - 50
magiran.com/p2034510  
روش‌های دسترسی به متن این مطلب
اشتراک شخصی
در سایت عضو شوید و هزینه اشتراک یک‌ساله سایت به مبلغ 300,000ريال را پرداخت کنید. همزمان با برقراری دوره اشتراک بسته دانلود 100 مطلب نیز برای شما فعال خواهد شد!
اشتراک سازمانی
به کتابخانه دانشگاه یا محل کار خود پیشنهاد کنید تا اشتراک سازمانی این پایگاه را برای دسترسی همه کاربران به متن مطالب خریداری نمایند!