Investigation of 6061 aluminum alloy pulsed laser welding based on the physical models for prediction of hot cracks
Message:
Article Type:
Research/Original Article (دارای رتبه معتبر)
Abstract:
It is necessary to use a physical model for the relationship between welding parameters and hot cracks. These models are available in micro, meso, and macro-scale. In this research, a sheet of 6061 aluminum alloy was welded by a Nd:YAG laser machine. For the first time, the diameter of the dendritic arm spacing in the aluminum laser weld was measured and the results were compared with the solidification models. Contrary to the prediction of hot crack models, increasing the dendritic arm spacing, decreasing the solidification rate, and the reduction of the strain rate did not reduce hot cracking. However, based on the pre-existing models, preheating should reduce hot cracks, but inversely increases the amount of cracks. The images of high speed cameras and the assessment of crack surface by a field emission scanning electron microscopy showed that in pulsed laser welding, hot cracks will be created in three steps: 1) initiation 2) the first step of propagation 3) the second step of propagation. Propagation in the second step will occur in the newly solidified weak grain boundary of the weld metal. What is finally seen as a crack in the weld seam is the solidification and high temperature cracks and therefore, the models that are considered for continuous fusion welding are required to be modified based on the conditions of the pulsed solidification and melting and the fracture of weak grain boundaries after solidification should also be taken into account.
Language:
Persian
Published:
Advanced Prosesses in Materials Engineering, Volume:13 Issue: 50, 2019
Pages:
49 to 63
magiran.com/p2058261  
دانلود و مطالعه متن این مقاله با یکی از روشهای زیر امکان پذیر است:
اشتراک شخصی
با عضویت و پرداخت آنلاین حق اشتراک یک‌ساله به مبلغ 990,000ريال می‌توانید 70 عنوان مطلب دانلود کنید!
اشتراک سازمانی
به کتابخانه دانشگاه یا محل کار خود پیشنهاد کنید تا اشتراک سازمانی این پایگاه را برای دسترسی نامحدود همه کاربران به متن مطالب تهیه نمایند!
توجه!
  • حق عضویت دریافتی صرف حمایت از نشریات عضو و نگهداری، تکمیل و توسعه مگیران می‌شود.
  • پرداخت حق اشتراک و دانلود مقالات اجازه بازنشر آن در سایر رسانه‌های چاپی و دیجیتال را به کاربر نمی‌دهد.
دسترسی سراسری کاربران دانشگاه پیام نور!
اعضای هیئت علمی و دانشجویان دانشگاه پیام نور در سراسر کشور، در صورت ثبت نام با ایمیل دانشگاهی، تا پایان فروردین ماه 1403 به مقالات سایت دسترسی خواهند داشت!
In order to view content subscription is required

Personal subscription
Subscribe magiran.com for 50 € euros via PayPal and download 70 articles during a year.
Organization subscription
Please contact us to subscribe your university or library for unlimited access!