Experimental Investigation, Mathematical Modeling and Optimization of Cutting Forces in the Automatic Process of Cortical Bone Milling
Message:
Article Type:
Research/Original Article (دارای رتبه معتبر)
Abstract:

Cortical bone milling is used in orthopedic surgeries such as knee replacement, otological, spinal cord, and hip replacement. The cutting forces created by the cutting tool during cortical bone milling in order to control the wear of the tool as well as applying allowable force to the bone to prevent fracture should be controlled. In this paper, the effective parameters in the bone milling including cutting speed, feed rate, cutting depth and tool diameter has been investigated using the response surface method in order to predict the cutting forces. In this method, a second-order linear regression equation can be presented in order to predict the behavior of the bone milling process precisely. Also, Sobel's sensitivity analysis method was used to study the effect of input parameters on the behavior of cutting force. In this research, the behavior of different input parameters and the effect of their interactions on the machining force has been evaluated and analyzed. The components of cutting force were measured and investigated in three directions of feed, perpendicular to the feed and perpendicular to the bone surface. The results show that the mathematical model governing the problem has a proper function within the range of the defined parameters and it can provide a good prediction of force behavior. The minimum cutting force can be achieved in a rotational speed of 1500 rpm, feed of 12 mm/min, tool diameter of 2 mm, and cutting depth of 0.2 mm. Also, about the sensitivity of the force behavior based on the input parameters variation in the range of experiments, the greatest effect was related to the cutting depth with 36.3% of the effect, and feed rate with 28.4% of the effect, the diameter of the tool with 27.5% of the effect and the rotational speed with 7.8% of the effect.

Language:
Persian
Published:
Modares Mechanical Engineering, Volume:20 Issue: 4, 2020
Pages:
987 to 997
magiran.com/p2096180  
دانلود و مطالعه متن این مقاله با یکی از روشهای زیر امکان پذیر است:
اشتراک شخصی
با عضویت و پرداخت آنلاین حق اشتراک یک‌ساله به مبلغ 990,000ريال می‌توانید 70 عنوان مطلب دانلود کنید!
اشتراک سازمانی
به کتابخانه دانشگاه یا محل کار خود پیشنهاد کنید تا اشتراک سازمانی این پایگاه را برای دسترسی نامحدود همه کاربران به متن مطالب تهیه نمایند!
توجه!
  • حق عضویت دریافتی صرف حمایت از نشریات عضو و نگهداری، تکمیل و توسعه مگیران می‌شود.
  • پرداخت حق اشتراک و دانلود مقالات اجازه بازنشر آن در سایر رسانه‌های چاپی و دیجیتال را به کاربر نمی‌دهد.
دسترسی سراسری کاربران دانشگاه پیام نور!
اعضای هیئت علمی و دانشجویان دانشگاه پیام نور در سراسر کشور، در صورت ثبت نام با ایمیل دانشگاهی، تا پایان فروردین ماه 1403 به مقالات سایت دسترسی خواهند داشت!
In order to view content subscription is required

Personal subscription
Subscribe magiran.com for 50 € euros via PayPal and download 70 articles during a year.
Organization subscription
Please contact us to subscribe your university or library for unlimited access!