|تاریخ چاپ: 1399/04/17|
|تحلیلی بر مکان یابی پایانه مسافربری روستایی در شهرها با استفاده از روش ترکیب خطی وزنی (WLC) و مدل الکترا (مطالعه موردی: شهر مشکین شهر)|
|نویسنده(گان):||هادی حکیمی، زهرا رضازاده، رقیه عسکرنژاد*|
یکی از عناصر خدمات شهری، پایانه مسافربری است. پایانه ها به عنوان مفصل ارتباطی جاده های برون شهری و درون شهری، مانع تردد اتوبوس ها به داخل شهرها می شوند و ازاین رو در بهبود وضعیت ترافیک و مدیریت سفرها نقشی سازنده ایفا می کنند. در شهر مشکین شهر به دلیل عدم وجود پایانه برای سرویس دهی به روستاهای مستقر در اطراف شهر، وسایط نقلیه مسافرکش که خیابان ها را اشغال می نمایند، باعث به وجود آمدن نابسامانی هایی از قبیل بار ترافیکی و مشکلات ناشی از آن شده است. به همین منظور این شهر به عنوان پایه مطالعاتی باهدف دستیابی به مناسب ترین مکان جهت استقرار مطلوب پایانه مسافربری انتخاب شده است. نوع تحقیق موردنظر بر اساس هدف، کاربردی و ازنظر ماهیت و روش، علی محسوب می شود. در این مقاله با استفاده از معیارهای مناسب (نزدیکی به جاده های اصلی، دسترسی به معابر اصلی شهر، سازگاری، دسترسی به تاسیسات و تجهیزات، مدل رقومی ارتفاع، شیب، فاصله از رودخانه، قیمت زمین و تراکم جمعیت) لایه های موردنظر در محیط Arc Map آماده سازی شده و با اعمال وزن های حاصل از فرایندهای وزن دهی در نرم افزار Expert Choice به روش AHP در یک مدل فراهم آمده و سپس این لایه ها در محیط نرم افزار IDRISI استانداردسازی شدند. طبق نقشه خروجی سه پهنه به عنوان پهنه های مناسب به دست آمد. برای رتبه بندی این پهنه ها از مدل الکترا استفاده گردید؛ بدین صورت رتبه برتر که به عنوان گزینه اول مطرح شده است در قسمت شمالی شهر که نزدیک ترین دسترسی را به جاده اصلی دارد انتخاب گردید. گزینه های دوم و سوم نیز به عنوان اولویت های بعدی در قسمت های جنوب غربی شهر قرار دارد.
|کلیدواژگان:||الکترا، پایانه ها، تحلیل سلسله مراتبی، شهر مشکین شهر، مکان یابی، منطق فازی|
|نوع مقاله:||مطالعه موردی|
|انتشار در:||مجله جغرافیا و توسعه فضای شهری، سال ششم شماره 1 (بهار و تابستان 1398)|
|نسخه الکترونیکی:||متن این مقاله در سایت مگیران قابل مطالعه است.|
|An Analysis of Rural Terminal Locations in Cities using the Weighted Linear Combination (WLC) Technique and ELECTRE Model (Case Study: Meshkinshahr)|
|Author(s):||Hadi Hakimi، Zahra Rezazadeh، Roghayeh Askarnezhad*|
One of the important aspects of urban planning is the proper positioning of urban service elements. Within their extensive spectrum involving facilities and equipment, these services include elements that should be positioned in suitable locations according to a set of policies and criteria; terminals are one of those elements. As communication junctures between urban and suburban roads, the presence of terminals prevents the entrance of buses to cities; therefore, they play a constructive role in improving traffic, reducing urban environmental pollutions, and managing trips. Given the absence of terminals to provide services to the rural areas surrounding Meshkinshahr City, taxies and vehicles occupy the streets which results in traffic congestion and its related issues. Accordingly, this city was selected in this study which is aimed at identifying the most suitable location for a terminal.
Review of Literature:
Some terms are needed to be clarified in this study.Location: In his book titled urban land use planningPourmohammadi (2003) defines location as an activity in which the capabilities of a region is assessed and analyzed in terms of suitable and sufficient land for a particular use.Urban Transportation System: Urban transportation systems include facilities and services that enable travelling to the entire region and provides opportunities including i) movement of residents and commodities, and ii) access to different urban lands with various uses.Terminals: Terminals are junctures in which travel and shipment begin or end.Studies conducted on the area of rural terminal location are considerably limited.Foreign sources in this field has mostly been focused on identifying locations for multiple stations using network analysis as well as achieving the best possible model to minimize costs. A number of domestic inquiries involve terminal location using methods such as AHP, P-Median, etc. through multiple criteria.
The purpose of the present study is applied in which the causal method was employed. There are a number of different indices for terminal location; the indices used in this study was examined in four aspects including physical, environmental, economic, and social. Indices used in the physical aspect include adjacency to the main roads, access to the main urban routes, adaptability, access to facilities and equipment. In the environmental aspect, indices included digital elevation model, and gradient, and distance from rivers. The economic aspect involved the land cost and finally, the social aspect included population density and households.In order to express the relative significance of indices, first their relative weight should be determined. To this end, the analytic hierarchy process (AHP) method was employed. Through indicating the priority of layers over each other using the Expert Choice software, the final weight of each layer was obtained with an instability coefficient of 0.02. Then, the layers should be standardized using fuzzy logic. Unlike Boolean logic, the certainty problem does not exist in fuzzy logic and each layer is graded ata scale between zero to one. At these scales, higher values mean higher utility. In addition to the issue of choosing a scale to draw fuzzy maps, the type of the fuzzy function should also be examined; in this study, functions including sigmoidal, linear and user-defined were used. Moreover, one of the points that should be taken into account while standardizing fuzzy maps is indication of the threshold limit which is also called control points.The ELECTRE method is one of the multi-criterion decision analysis methods used from the middle of 1960s in Europe. As a “non-grade” method, options in this method are not graded. The ELECTRE method was employed in this study in order to grade suitable zones. In this method, all options are assessed using non-graded comparisons and ineffective options are removed.
Results and Discussion
Following the preparation of the intended layers in Arc Map and the application of weights obtained from weighing process in the expert choice software using the AHP method, a model was provided in which criteria including closeness to main roads with a weight of 0.234 and distance from rivers with a weight of 0.029 involve the highest and lowest final weights, respectively. Other criteria involved weights between these two values. Next, layers were standardized in the Idrisi software. Then, layers were multiplied by each other using the GIS Analysis command in Idrisi software and the obtained result included a zoning in which the suitable locations for terminals were expressed. Finally, zones with perfect potentials were graded using the ELECTRE model; the grading results showed that option 1 which is located in the northern part of the city and involves the closest access to the main road is the first suitable option for a terminal. Another reason this location was selected is that passengers who enter the city can gain access to the main urban routes as fast as possible. Moreover, land uses present at this zone are more adaptable to the terminal and there are more arid lands where terminals can be constructed. In terms of land prices, this option is more cost-effective compared to others. Other priorities were obtained as options 2 and 3 (South East of the city).
In this study, different social, economic and natural aspects were examined and scientific models and principles were employed in order to identify suitable locations for terminals. First, the accessible informational layers and criteria were studied and location analyses were conducted so as to obtain an output map that shows suitable and unsuitable zones for terminal construction. Then, zones with perfect potentials were graded using the ELECTRE model.The majority of studies conducted in the area of terminal location have mostly focus on physical, environmental, economic, and social factors. It was also attempted in this study to take all these factors into account. However, the merit of the present study lies within the use of the WLC model and the ELECTRE method for zoning and grading suitable zones, respectively.Recommended Strategies:1. For the purpose of cost-effectiveness, the construction of the terminal should begin before the price of the zone is increased.2. The establishment of incompatible land uses should be prevented before the construction of terminal.3. Since the criterion regarding the multitude of the surrounding rural areas was overlooked in this study due to certain limitations, this index is recommended to be examined in future research.
|Keywords:||ELECTRE، AHP، Terminals، Meshkinshahr City، Location، Fuzzy Logic|
|Article Type:||Case Study|
|Published:||Journal of Geography and Urban Space Development, Volume:6 Issue: 1, 2020|
|Full text:||PDF is available on the website.|