فهرست مطالب

نشریه علوم و فناوری رنگ
سال نهم شماره 3 (پیاپی 33، پاییز 1394)

  • تاریخ انتشار: 1394/09/06
  • تعداد عناوین: 9
|
  • تارا عاقبتی، مهدی نوری *، مرجان عباسی صفحات 177-188
    غشای پلیمری نامتقارن الیاف توخالی پلی آکریلو نیتریل طی ریسندگی خشک و تر تهیه شد. با توجه به اهمیت تاثیر شکل و ساختار الیاف توخالی بر عملکرد جداسازی، متغیرها در ریسندگی مانند ترکیب منعقدکننده ها جهت به دست آوردن غشای لیف توخالی بهینه تغییر داده شد. آب با درصدهای متفاوت گلیسیرین به عنوان منعقدکننده داخلی و حمام انعقاد استفاده گردید. اثر غلظت گلیسیرین بر عملکرد تراوائی و جداسازی الیاف توخالی مورد بررسی قرار گرفت و از رنگزای قرمز مستقیم 80 با استفاده از ماژول غشای الیاف توخالی جهت اندازگیری عملکرد جداسازی استفاده گردید. از تصاویر میکروسکوپ الکترونی پویشی FE-SEM جهت بررسی مقطع عرضی الیاف توخالی حاصل استفاده شد و همچنین استحکام الیاف توخالی توسط دستگاه استحکام سنج الیاف اندازه گیری گردید. نتایج نشان داد که نفوذپذیری الیاف توخالی با افزایش گلیسیرین به منعقدکننده داخلی و حمام انعقاد افزایش می یابد. به علاوه، الیاف توخالی ریسیده شده در مقدار کم تر گلیسیرین نفوذپذیری هیدرولیکی پایین تر، بازده جداسازی بیشتر و استحکام بیشتر را نشان می دهند.
    کلیدواژگان: حذف رنگزا، رنگزای مستقیم قرمز 80، الیاف توخالی، جداسازی، پلی آکریلونیتریل، ریسندگی تر
  • دانیال هرندی، محمدحسین طاهری *، علیرضا سرداری صفحات 187-197
    دیوارنگاره های پیش از تاریخ، بخش اندکی از یافته های باستان شناسی ایران را تشکیل می دهند. بنابراین، شناسایی رنگدانه های به کار رفته در آنها، اطلاعات ارزنده ای از فن شناسی و نحوه رنگ آمیزی پیش ازتاریخ ایران در اختیار ما قرار می دهد. در این پژوهش نتایج آنالیزهای تحلیلی مختلف بر روی دیوارنگاره به دست آمده از کاوش تپه پیش ازتاریخ «تل مش کریم» (مربوط به دوره مس و سنگ) واقع در سمیرم اصفهان گزارش شده است. مطالعات با کمک میکروسکوپ نوری (OM)، پراش پرتو ایکس (XRD)، میکروسکوپ الکترونی روبشی مجهز به تفرق پرتو ایکس (SEM-EDS) و طیف سنجی زیر قرمز تبدیل فوریه (FTIR) صورت گرفت. شناسایی عنصر اصلی کلسیم و فاز بلوری کلسیت نشان دهنده استفاده از سفید آهک (آهک سفید) جهت رنگ آمیزی است. نتایج آنالیز XRD و شناسایی هماتیت در رنگ قرمز بیانگر رنگدانه اخرا است. همچنین نتایج آنالیز FTIR از رنگ سیاه نشان داد که از دوده زغال سنگ جهت رنگ سیاه استفاده شده است.
    کلیدواژگان: دیوار منقوش، رنگدانه، تل مش کریم، اخرا، دوده زغال سنگ، مس و سنگ
  • محمد ملکوتیان *، خدیجه گل میرزایی صفحات 199-205
    در مطالعه حاضر اکسیداسیون رنگزاها از پساب های رنگی نساجی توسط ازن /پراکسید هیدروژن مورد ارزیابی قرارگرفت. رنگزای راکتیو قرمز 198 رنگزای موردنظر برای آزمایش بود.اکسیداسیون رنگزا توسط ازن /پراکسیدهیدروژن از طریق طیف سنجی مطالعه شد. حداکثر بازده حذف رنگزای راکتیو قرمز 198 در شرایط بهینه شامل 9 pH=، زمان تماس 30 دقیقه، غلظت اولیه رنگ ppm100 و غلظت بهینه 0.005 مولار پراکسید هیدروژن در غلظت ازن ثابت 0.04 گرم در ساعت با فشار 0.5 بار درمحلول سنتتیک 97.09% به دست آمد. در شرایط بهینه بازده حذف در محلول واقعی (فاضلاب نساجی یزدباف) 87.56% بود. سیستم ازن /پراکسید هیدروژن کارایی مناسبی در حذف رنگ مورد نظر داشت. با توجه به بازده بالا در شرایط واقعی می توان جهت حذف آلاینده های مقاوم در صنایع مختلف استفاده نمود.
    کلیدواژگان: پراکسید هیدروژن، رادیکال هیدروکسیل، ازن، نساجی یزدباف
  • دانیال هرندی، حسین احمدی *، محسن محمدی آچاچلویی صفحات 207-216
    اخیرا استفاده از نانوذرات جاذب UV جهت حفاظت از آثار سلولزی و لیگنوسلولزی، جایگاه ویژه ای یافته است. در این پژوهش نمونه چوب صنوبر کبوده تیمارشده با پراکنش نانوذرات دی اکسید تیتانیم و اکسید روی، در دو غلظت 1 و 2 درصد مورد مطالعه قرار گرفت. نمونه ها با استفاده از لامپ UV-B تحت کهنگی تسریعی قرار داده شدند. ارزیابی ساختاری نمونه ها با استفاده از آزمون طیف سنجی زیر قرمز - بازتاب کل تضعیف شده تبدیل فوریه (ATR-FTIR) و رنگ سنجی انجام شد. نتایج نشان داد غلظت 1 درصد از نانوذرات دی اکسید تیتانیم، توانایی کمی در حفاظت از پرتو UV دارد و افزایش غلظت نانوذرات موجب افزایش شاخص بلورینگی و تخریب در ناحیه بی شکل سلولز می شود. تیمار با نانوذرات اکسید روی موجب کاهش تخریب در لیگنین و پلی ساکاریدهای چوب شده و افزایش غلظت نانوذرات بر توانایی حفاظت چوب در برابر پرتو UV افزود. افزایش غلظت هر دو نانوذرات موجب کاهش تیرگی و تغییرات کلی رنگ (E) شد و نمونه تیمار با نانوذرات اکسید روی E کمتری نسبت به دی اکسید تیتانیم داشت. به طورکلی، نانوذرات اکسید روی کارایی بهتری نسبت به دی اکسید تیتانیم در حفاظت چوب در برابر پرتو UV داشت.
    کلیدواژگان: چوب، صنوبر، محافظ پرتو UV، نانوذرات دی اکسید تیتانیم، نانوذرات اکسید روی، آثار چوبی تاریخی
  • منصور عامری اردستانی، فرهود نجفی *، بهزاد شیرکوند هداوند صفحات 217-223
    در این تحقیق، پلی اتیلن گلیکول یورتان اکریلات که نوعی پراکنش گر خطی غیر یونی تابش پز است با استفاده از پلی اتیلن گلیکول (PEG)، ایزوفورن دی ایزو سیانات (IPDI)، هیدروکسی اتیل متااکریلات (HEMA)، در مجاورت کاتالیزور دی بوتیل تین دی لائورات (DBTDL) و استن به عنوان حلال، سنتز شد. ساختار مولکولی پراکنش گر غیریونی پلی اتیلن گلیکول یورتان اکریلات با استفاده از طیف سنجی تبدیل فوریه زیرقرمز FT-IR و 1H-NMR شناسایی شد و وزن مولکولی توسط GPC اندازه گیری شد. علاوه بر این پراکنش گر سنتز شده در پراکنش TiO2 به کار برده شد و کیفیت پراکندگی و میزان پراکنش ذرات توسط گریندومتر بررسی شد. نتایج نشان داد که به دلیل محافظت برخوردی پراکنش گر غیریونی، اندازه ذرات سوسپانسیون کاهش قابل توجهی یافته است. همچنین پراکنش گرهای با جرم مولکولی و طول زنجیر متوسط عملکرد مناسب تری در پایدارسازی ذرات TiO2 نشان دادند.
    کلیدواژگان: سنتز، پراکنش گر پلیمری، پراکنش گر غیریونی، تابش پز
  • مهساسادات میرعلینقی *، الهام منیری، مریم فرزان صفحات 225-238
    در این تحقیق، آزمایش های سینتیکی در یک سیستم ناپیوسته برای جذب ر اکتیو قرمز 198روی کربن فعال مغناطیسی انجام شد. اثر pH و زمان تماس بر فرآیند جذب سطحی مورد مطالعه قرار گرفت. با هم زدن محلول، زمان رسیدن به تعادل کاهش یافت. داده های تجربی سینتیکی با مدل های شبه مرتبه اول، شبه مرتبه دوم، و نفوذ درون ذره ای به دو روش خطی و غیرخطی، با استفاده از نرم افزار Mathematica برازش شدند. نتایج نشان داد که روش غیرخطی، روش مناسب تری برای پیش بینی مشخصه های سینتیکی سرعت جذب است. همچنین، سینتیک جذب سطحی رنگزا از معادلات شبه مرتبه دوم و نفوذ درون ذره ای پیروی می کند.
    کلیدواژگان: جذب سطحی، مدل سینتیکی، رگرسیون غیرخطی
  • داود رئیسی، رضا شجاع رضوی *، مهرداد طاهران صفحات 239-250
    در این تحقیق، تاثیر نانوذرات کاربید سیلیسیم و روش آماده سازی سطح زیرلایه بر خواص مکانیکی و رفتار خوردگی پوشش های نانوکامپوزیت PU-SiC با ضخامت حدود 40 میکرومتر بر روی زیرلایه فولاد کم کربن مورد ارزیابی قرار گرفت. نانوکامپوزیت ها به روش اختلاط محلولی تهیه شدند و زیرلایه با روش های ماسه پاشی و سنباده زنی آماده سازی شد. اندازه نانوذرات و پراکندگی آن ها با استفاده از تصاویر میکروسکوپی الکترونی روبشی گسیل میدانی و تجزیه و تحلیل پراش پرتو ایکس بررسی گردید. خواص فیزیکی و مکانیکی پوشش ها با استفاده از آزمون های چسبندگی قدرت کندن، ضربه لوله ای و سختی سنج مدادی، مورد بررسی قرار گرفت. جهت بررسی تاثیر پوشش ها بر خواص خوردگی فولاد از آزمون های امپدانس الکتروشیمیایی و پتانسیودینامیک استفاده گردید. جهت بررسی تاثیر نانوذرات بر ساختار پلی یورتان از آزمون طیف سنجی زیر قرمز تبدیل فوریه استفاده شد. نتایج بررسی ها نشان داد، با افزودن نانوذرات تا 2 درصد وزنی در پوشش های پلی یورتان، استحکام چسبندگی تا 50 درصد، سختی از 3H به 5H و مقاومت به ضربه پوشش ها حدود 34 درصد افزایش یافت و تغییر چندانی در رفتار خوردگی آن ها نسبت به پلی یورتان ایجاد نشد. نتایج تجزیه و تحلیل پراش پرتو ایکس و تصاویر میکروسکوپی الکترونی روبشی گسیل میدانی نشان داد نانوذرات تا 2 درصد وزنی به خوبی در زمینه پلی یورتان پراکنده شدند. آماده سازی سطح زیرلایه به روش ماسه پاشی نسبت به روش سنباده زنی استحکام چسبندگی را تا 35 درصد بهبود داد ولی مقاومت به ضربه کمتری در پوشش ها ایجاد کرد.
    کلیدواژگان: نانوکامپوزیت، پلی یورتان، کاربید سیلیسیم، استحکام چسبندگی، خوردگی
  • مسعود باقرزاده کثیری* صفحات 251-258
    در این پژوهش نوع و ترکیب رنگ آبی بکار رفته به همراه دلیل اصلی بروز لکه های سفید رنگ در نگاره های منتخب از کتاب مصور یوسف و زلیخا مورد مطالعه قرار گرفته است. جهت نیل به این هدف، نگاره های منتخب این کتاب توسط روش های نشر پرتو ایکس القائی پروتون (PIXE) و میکروسکوپی نیروی اتمی (AFM) مورد بررسی قرار گرفتند. نتایج نشان دادند که رنگدانه موجود در این نواحی آبی رنگ عمدتا لاجورد می باشد. نتایج آزمایش ها همچنین وجود پرکننده های کربنات کلسیم و کربنات سرب را در نواحی مورد بررسی نشان دادند که وجود این پرکننده ها، دلیل عمده بروز لکه های سفید رنگ بر سطح نگاره می باشد. تصاویر میکروسکوپی نیروی اتمی نیز نشان دادند که انحلال کربنات کلسیم در محیط اسیدی باعث بهم پیوستن مجموعه های کوچک این نمک و در ادامه، راندن این لخته های بزرگ تر به سطح نگاره شده است.
    کلیدواژگان: لاجورد، نگاره، نشر پرتو ایکس القایی پروتون، میکروسکوپ نیروی اتمی، رنگدانه
  • فرحناز نورمحمدیان *، مهناز داودزاده غلامی، علی آشتیانی عبدی صفحات 259-271
    در ساختارهای فوتوکرومیک بر پایه اسپیروپیران ها، اتصالات کربن اسپیرو باعث می شود که دو حلقه مجاور نسبت به هم عمود قرار بگیرند. در اثر تابش نور، فرم رنگی مروسیانین ایجاد شده که در حالت پایه خود دارای ساختار صفحه ای و تخت است. در نتیجه این تغییر ساختار، خواص فیزیکی و شیمیایی مولکول نیز دستخوش تغییرات عمده ای می شود. از آنجا که محیط انجام واکنش فوتوکرومیسم یکی از مهم ترین متغیر ها است که تاثیر زیادی بر کیفیت و کمیت انجام واکنش های رفت و برگشت فوتوکرومیسم دارد، بنابراین در تحقیق حاضر، رفتار نوری و پایداری ساختارهای سه ماده فوتوکرومیک آزواسپیروپیرانی در حلال های مختلف بررسی شده و اثر ساختار بر برهم کنش با حلال ها گزارش شده است. در بررسی اثر حلال بر روی مواد رنگزا، دو مورد بیشینه جذب و قدرت رنگی مورد ارزیابی قرار گرفته است و فرآیند های روشن و خاموش کردن نوری و گرمایی و آزمون حلال ها به منظور شناخت بهتر خواص مولکول مطالعه شده است.
    کلیدواژگان: مواد رنگزای فوتوکرومیک نوین، بیس اسپیروپیران، بیس آزو، اثرات حلال پوشی، جذب و نشر نور، مولکول غیرمتقارن
|
  • T. Aghebati, M. Nouri*, M.Abbasi Pages 177-188
    Polyacrylonitrile (PAN) hollow fiber membranes were manufactured through the dry-jet wet spinning. Considering importance effect of structure of hollow fiber to separation performance، spinning parameters such as coagulants composition were changed to achieve suitable hollow fiber membranes. Water with different amount of glycerin was used as the bore liquid and coagulation bath. The effects of the glycerin concentration on the hollow fiber permeation and separation performance were investigated. Direct red 80 was used to measure the separation performance of hollow fiber module. Field emission scanning electron microscope (FE-SEM) was used to analyze the structure of the hollow fibers. The results proved that permeation is increased by adding glycerin to external and internal coagulation bath. In addition، hollow fibers spun in lower glycerin value would indicate lower hydraulic permeability، higher separation and higher tensile strength. J. Color Sci. Tech. 9 (2015)، 177-185©. Institute for Color Science and Technology.
    Keywords: Dye removal, Direct red 80, Hollow fiber, Separation, Polyacrylonitrile, Wet spinning
  • D. Harandi, M. H. Taheri*, A. Sardari Pages 187-197
    There are few remains of Prehistoric murals in Iran. So، identification of pigments that were used in them is beneficial information for study of Prehistoric painting technology and method of Iran. The present study reports some of the resuls optainted from the application of different analytical techniques to characterize three pigments of Chalcolithic site of Tal-e Mash Karim، Central Iran. The characterization of the studied paintings was carried out by means of optical microscopy (OM)، scanning electron microscopy (SEM) equipped with an energy dispersive X-ray detector (EDS)، X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Identification the main element of calcium and calcite crystal phase represents the white limestone for white coloring. XRD analysis and identification of hematite in red pigment، Indicated of the red ochre. Also، the FTIR analysis of black pigment indicates of application of coal ash in colors. J. Color Sci. Tech. 9 (2015)، 187-197©. Institute for Color Science and Technology.
    Keywords: Wall painting, Pigment, Tal, e Mash Karim, Red ochre, Coal ash, Chalcolithic
  • M. Malakootian*, Kh. Golmirzaee Pages 199-205
    Present study oxidation of dyes from dye effluents by O3/H2O2 was investigated. Reactive red 198 (RR198) examined as a target dye. Dye oxidation measured by spectrophotometer. The maximum removal efficiency in optimum conditions including pH=9، contact time=30 minutes، the initial concentration of dye=100 ppm، H2O2 concentration=0. 005 molar، O3 concentration = 0. 04 g/hr were 97. 09% and 87. 56% for synthetic solution and actual wastewater (wastewater from Yazdbaft textile) respectively. O3/H2O2 had good efficiency in dye removal. This method with respect to high efficiency in actual condition could be used in dye removal from various industries. J. Color Sci. Tech. 9 (2015)، 199-205©. Institute for Color Science and Technology.
    Keywords: Hydrogen peroxide, Hydroxyl radical, Ozone, Yazdbaft textile
  • D. Harandi*, H. Ahmadi, M. Mohammadi Achachluei Pages 207-216
    Recently، the use of nanoparticles UV-absorber to protect the artworks of cellulosic and lignocellulosic has a special place. In this study، white poplar wood samples treated with dispersions of Nano-Tio2 and Nano-ZnO at two doses of 1% and 2% was investigated. The samples were placed under accelerated aging of UV-B irradiation. Structural changes were investigated by application of spectro-colorimeter and ATR-FTIR spectroscopy. Results showed that 1% of Nano-TiO2 little ability to protect from UV-irradiation. increasing the dose of nanoparticles increases the crystallinity index and amorphous cellulose degradation in the area. Treated with Nano-ZnO reduced degradation of lignin and polysaccharides in wood، and increasing the dose of nanoparticles added ability to protect against UV-irradiation. Increase of the both nanoparticles caused reduction of the darkens and the total colour difference (DE*). Treated samples with Nano-ZnO had total colour difference less than the titanium dioxide. Generally، zinc oxide nanoparticles have better ability of titanium dioxide to protection of wood against UV irradiation. J. Color Sci. Tech. 9 (2015)، 207-216©. Institute for Color Science and Technology.
    Keywords: Wood, Poplar wood, UV protection, TiO2 nanoparticles, ZnO nanoparticles, Wooden artifacts
  • M. Ameri Ardestani, F. Najafi*, B. Shirkavand Hadavand Pages 217-223
    In this research polyethylene glycol urethane acrylate was synthesized as a nonionic linear polymeric dispersant based on polyethylene glycol (PEG)، isophorone diisocyanate (IPDI)، hydroxyethyl methacrylate (HEMA) in presence of dibutyltin dilaurate (DBTDL) as catalyst and acetone as a solvent. The nonionic polyethylene glycol urethane acrylate dispersant was characterized by Fourier Transform Infrared (FT-IR) and Proton Nuclear Magnetic Resonance (1H-NMR) and molecular weight was measured by Gel Permeation Chromatography (GPC). Besides، the dispersants were used for dispersing of TiO2 and dispersion quality and distribution was determined by Grindometer. The results indicated that because of steric protect dispersant، suspension particle size decreased. Also dispersant with the medium molecular weight and chain length، showed a better performance on the stabilization of particles of TiO2. J. Color Sci. Tech. 9 (2015)، 217-223©. Institute for Color Science and Technology.
    Keywords: Synthesis, Polymeric dispersant, Nonionic dispersant, UV Curable
  • M. Miralinaghi*, E. Moniri, M. Farzan Pages 225-238
    In this research، batch kinetic experiments were carried out for the sorption of Reactive Red 198 onto magnetic activated carbon. Effect of pH and contact time on the adsorption process was studied. The equilibrium time decreased with agitation of solution. The experimental kinetic data were fitted to the pseudo-first order، pseudo-second order، and intra-particle diffusion models by linear and non-linear methods using Mathematica software. The results showed that non-linear method is the most appropriate method to predict the rate kinetic parameters. Also، dye adsorption kinetics followed both pseudo-second order and intra-particle diffusion models. J. Color Sci. Tech. 9 (2015)، 225-238©. Institute for Color Science and Technology.
    Keywords: Adsorption, Kinetic model, Non, linear regression
  • D. Reisi, R. Shojarazavi*, M. Taheran Pages 239-250
    In this research the effect of silicon carbide nanoparticles and surface pretreatment on the mechanical properties and corrosion protection properties of the polyurethane coatings (40 μm in thickness) were studied on a low carbon steel substrate. The substrates were prepared by polishing and sand blasting methods. Dispersion of the nanoparticles in the polyurethane coating was studied by field emission scanning electron microscope (FE-SEM) image and X-ray diffraction (XRD) analysis. The physical and mechanical properties of the coatings were evaluated by pull-off adhesion، Tubular impact and pencil hardness tester. The Electrochemical Impedance Spectroscopy (EIS) and polarization tests were employed in order to investigate the corrosion resistance behavior of the coatings. The effect of nanoparticles on the chemical bonding of polyurethane were investigated using Fourier Transform Infrared Spectrometry (FT-IR) Analysis. The results of the physical and mechanical study showed that the existence of 2 wt% of nanoparticles، leads to the increase of the adhesion strength up to 50%، hardness of coating increased from 3H to 5H and impact resistance were increased about 34 %. In addition، the results of electrochemical test showed that the existence of 2 wt% of nanoparticles in polyurethane did not significantly change the corrosion resistance behavior of the polyurethane. The results of field emission scanning electron microscope (FE-SEM) image and X-ray diffraction (XRD) analysis showed that nanoparticles up to 2 wt% were well dispersed in polyurethane. Sand blasting of the specimens prior to coating increased adhesion strength up to 35%، but decreased the impact resistance in compare with polishing. J. Color Sci. Tech. 9 (2015)، 239-250©. Institute for Color Science and Technology.
    Keywords: Nanocomposites, Polyurethane, Silicon carbide, Adhesive strength, Corrosion
  • M. B. Kasiri* Pages 251-258
    In this work، the composition of blue paints in selected miniatures of Yūsof-o-Zalīkhā (Yusuf and Zulaikha) illustrated book related to Safavid period (Iran، 15th century) as well as the main reasons of their destruction have been investigated. The miniatures were analyzed by proton-induced X-ray emission (PIXE) and atomic force microscopy (AFM) analytical methods. It was found that the pigment of blue colors is mainly lazurite and the extender is the main cause of destruction of blue paints. PIXE analysis results showed the presence of the extenders; PbCO3 and CaCO3. The AFM images showed that dissolving the extender CaCO3 in acidic media has united small aggregation of the salt and driven these bigger aggregations to the surface، makes them visible as white spots in the surface of the miniature. J. Color Sci. Tech. 9 (2015)، 251-258©. Institute for Color Science and Technology.
    Keywords: Lazurite, Persian miniature, PIXE, AFM, Pigment
  • F. Nourmohammadian*, M. Davoudzadeh Gholami, A. Ashtiani Abdi Pages 259-271
    In photochromic structures based on spiropyrans، two rings of spiro moiety are perpendicular. Merocyanine form with linear and conjugated structure produces by exposure to UV irradiation. Physicochemical properties of the molecular changes owing to this isomerization، and molecule switches between colored and colorless forms. Since، chemical properties of medium is highly effective on photochromic properties and reversibility، in this study، stability and photoresponces of three azospiropyran based photochromic molecule in different organic media were studied. Also، maximum absorption and molar absorption coefficient of these photochromic dyes in different solvents were evaluated. Solvatochromic effects were studied in switching ON/OFF of the molecules. J. Color Sci. Tech. 9 (2015)، 259-271©. Institute for Color Science and Technology.
    Keywords: Spiropyran, Bis, Azo, Photochromic, Asymmetric molecule, Solvatochromism