فهرست مطالب

بسپارش - سال پنجم شماره 3 (پیاپی 16، پاییز 1394)

فصلنامه بسپارش
سال پنجم شماره 3 (پیاپی 16، پاییز 1394)

  • تاریخ انتشار: 1394/10/13
  • تعداد عناوین: 14
|
  • فریبا گنجی، فاطمه رضایی، آرزو سروش نیا صفحات 3-17
    دارورسانی به صورت خوراکی به دلیل پذیرش بالای بیمار از دیرباز مورد توجه داروسازان بوده است. از سوی دیگر دارورسانی مخاطی به دلیل جریان خون بالای مخاط دهان جایگزین شکل های سنتی شد. بنابراین فیلم های نازک دهانی به عنوان شکل دارویی جدید مطرح و وارد بازار شدند. مزیت اصلی این فیلم ها، در استفاده ی آن ها برای کودکان و سالمندان است که معمولا با مشکل بلع مواجه هستند و نمی توانند دارو را در مقادیر بالا استفاده کنند. فیلم های دهانی از پلیمر، نرم کننده، ماده ی فعال دارویی، شیرین کننده، طعم دهنده و افزودنی های لازم دیگر تشکیل شده اند که به روش های ریخته گری با حلال، اکستروژن گرماذوب و غلتکی ساخته می شوند. مهم ترین ماده ی تشکیل دهنده فیلم پلیمر است. فیلم ها از پلیمرهای آب دوست طبیعی و مصنوعی ساخته می شوند. پلیمرهای آبدوست خواصی چون فروپاشی سریع، احساس خوب در دهان و خواص مکانیکی مناسب به فیلم می دهند. از معروفترین پلیمرهای طبیعی می توان به پلولان، نشاسته، پکتین و کیتوسان اشاره کرد. پلیمرهای مصنوعی شامل مشتقات سلولزی، پلی وینیل الکل و پلی وینیل پیرولیدون هستند. با توجه به نوع فیلم مورد ساخت از نظر زمان رهایش و ماندگاری در دهان، از پلیمرها و ترکیب آنها در ساخت فیلم مورد نظر استفاده می شود بنابراین بررسی خواص پلیمرها برای ساخت فیلم های دهانی از اهمیت ویژهای برخوردار است. در این مقاله سعی شده به بررسی خواص و موارد استفاده این پلیمرها برای انتخاب مناسب آن ها در فیلم های دهانی پرداخته شود.
    کلیدواژگان: فیلم های دهانی، پلیمر طبیعی، پلیمر سنتزی، خواص مکانیکی، خواص رهایشی
  • محمد رضوی نوری، مسعود طایفی، علیرضا ثابت صفحات 18-28
    همانگونه که در بخش اول این تحقیق به آن اشاره شد، کوپلیمر اتیلن- اکتن به دلیل داشتن شاخه در ساختارش، نسبت به پلی اتیلن پرچگال از تبلور کمتر و در نتیجه از دمای ذوب پایین تر و فرآیند پذیری بهتری برخوردار است. در ضمن، به دلیل بهبود خواص فیزیکی و مکانیکی مانند پایداری حرارتی، استحکام کششی و مقاومت در برابر نفوذ، نسبت به پلیمر خالص، تمایل زیادی برای استفاده از نانوکامپوزیت های پلیمر و نانوصفحات خاک رس بوجود آمده است. بهبود در کارایی فیزیکی و مکانیکی نانوکامپوزیت ها از نسبت منظر بالای نانو صفحات خاک رس و برهمکنش قوی بین پلیمر و پرکننده که می تواند کارآیی انتقال بار بین نانوپر کننده و ماتریس پلیمری را افزایش دهد، نشات می گیرد. تغییرات گرانروی با نرخ برش یا فرکانس زاویه ای نیز می تواند اطلاعات مفیدی را درباره خواص ویسکوالاستیک مذاب و فراورش نانوکامپوزیت ها دراختیار بگذارد. در پی بخش اول، این مقاله به مهم ترین تحقیقات انجام شده طی سال های اخیر در خصوص خواص مکانیکی و جریان شناسی نانوکامپوزیت های پلی اتیلن کم چگال، خصوصا کوپلیمر اتیلن- اکتن با نانو صفحات خاک رس می پردازد.
    کلیدواژگان: کوپلیمر اتیلن، اکتن، نانوکامپوزیت، نانوخاک رس، خواص مکانیکی، جریان شناسی
  • رحیم یدالهی، محمدرضا دهقانی فیروزآبادی صفحات 29-36
    از میان روش های اتصال مورد استفاده در ساخت نبافته های سلولزی و سنتزی بسته به نوع محصول و ویژگی های کیفی مورد نظر، روش اتصال چندگانه حرارتی، به همراه اتصال لاتکس، اتصال مناسبی می باشد. در اتصال با لاتکس فقط سطح نابافته تحت تاثیر قرار می گیرد و مناسب برای نابافته های با وزن پایه کم می باشد. در گراماژهای بالا قسمت مرکزی نابافته اتصال ایجاد نشده و سبب لایه ای شدن تشک الیاف می شود. اما در اتصال حرارتی این پدیده اتفاق نمی افتد و رنج گسترده ای از محصولات می توانند با این نوع اتصال ساخته شوند. همه روش های اتصال حرارتی اتصال نقطه ای قوی را میسر می سازد که بعلاوه بسیاری از حلال ها دشمن پایدار محیط زیست هستند. بنابراین در صورت استفاده از الیاف خمیر چوب که دوستار محیط زیست و تخریب پذیر هستند می توان علاوه بر داشتن بافت حجیم، جاذب و نرم، قیمت کمتری نیز داشت که در ساخت نابافته ها بیشتر مورد توجه قرار گرفته است. لایه خارجی تشک الیاف، کاربرد ضعیفی از اتصال دهنده لاتکس را با هدف کنترل ابتدایی خاکه نرمه الیاف برای کاهش مقادیر الیاف سست یا پرز های تولید شده در متعاقب فرآیندهای تبدیل دریافت می کند. در وسط تشک الیاف، از الیاف سنتزی به صورت مخلوط با الیاف سلولز استفاده می شود که عموما هسته الیاف سنتزی پلی پروپیلن (PP) یا پلی استر(PET) می باشد که به وسیله غلاف پلی اتیلنی (PE) با دمای ذوب پایین پوشیده شده است. غلاف الیاف سنتزی در اثر حرارت ذوب شده و اتصال را در تمام نقاط تشک الیاف ایجاد می کند.
    کلیدواژگان: نابافته های سلولوزی و سنتزی، اتصال چندگانه، لاتکس، الیاف سنتزی، زیست تخریب پذیر
  • امین عبدالهی، جابر کیوان راد، علیرضا مهدویان صفحات 37-47
    ترکیبات فوتوکرومیک به دلیل توانایی آنها برای پاسخ در برابر تحریک های ناشی از نور فرابنفش که منجر به ایجاد تغیر رنگ می شود، بسیار مورد توجه می باشند. این ترکیبات دارای انواع مختلفی هستند، اما از میان آنها ترکیبات اسپایرو (اسپایروپیران و اسپایروکسازین)، دی آزو و دی آریل اتن کاندیدای مناسبی برای وارد شدن به ماتریس های پلیمری می باشند. باتوجه به این که رفتار های هوشمند این ترکیبات پس از وارد شدن به ماتریس پلیمری به طور کامل به پلیمر منتقل می شود، پلیمرهای فوتوکرومیک در زمینه های مختلف توجه بسیار زیادی را به خود جلب کرده اند. ترکیبات فوتوکرومیک قادر هستند علاوه بر خواص نوری، خواص فیزیکی و شیمیایی ماتریس پلیمری را نیز تغییر دهند. نکته بسیار مهم در این رفتارهای هوشمند، برگشت پذیری تغییرات خواص فیزیکی و شیمیایی ماتریس پلیمری تحت تابش نور فرابنفش و مرئی می باشد. مکانیسم فوتوکرومیسم در آنها به صورتی است که واکنش برگشت می تواند به وسیله نور مرئی و گرما انجام شود. نکته قابل توجه این است که خواص ماتریس های پلیمری از قبیل ساختارهای شیمیایی، دمای انتقال شیشه ای و حتی مورفولوژی آنها بر روی خواص فوتوکرومیک این ترکیبات تاثیر گذار می باشد. به گونه ای که با کاهش دمای انتقال شیشه ای، افزایش خواص فوتوکرومیک به دلیل تحرک بیشتر زنجیر های پلیمری مشاهده می شود.
    کلیدواژگان: پلیمر هوشمند، ترکیبات حساس به نور، فوتوکرومیک، نور فرابنفش، محرک، پاسخ
  • رحیم دهقان، مجتبی کوشا صفحات 48-60
    دریچه های مصنوعی قلب، موادی هستند که عمدتا برای بیمارانی که نیاز به تعویض دریچه قلب دارند بکار گرفته می شود. دریچه های مصنوعی قلب به دو دسته اصلی دریچه های مکانیکی و دریچه های بیوپروستاتیک تقسیم بندی می شوند. مشکلاتی نظیر لختگی بر روی دریچه های مکانیکی فلزی و پایداری کم دریچه های بیوپروستاتیک، توجهات را به سمت ارتقاء این مواد معطوف کرده است. دریچه های پلیمری به عنوان یکی از مواد امید بخش در ساخت دریچه های مصنوعی قلب مطرح شده و در جهت مرتفع کردن مشکلات فعلی دریچه های مکانیکی فلزی و دریچه های بیوپروستاتیک مورد توجه می باشد. زیست سازگاری، خون سازگاری و مقاومت در برابر آهکی شدن و تخریب، موارد کلیدی در دریچه های قلب پلیمری به شمار می آیند. پلی یورتان ها به دلیل خواص مکانیکی خیلی خوب یکی از محبوب ترین موادی هستند که با وجود مشکلاتی نظیر آهکی شدن و تخریب، کماکان مورد توجه بسیاری از پژوهشگران قرار دارد. آهکی شدن یکی از مهم ترین چالش ها برای زیست پایداری پلی یورتان ها در دریچه های مصنوعی قلب مطرح می شود. دریچه قلب آنژیوفلکس از دریچه های قلب پلی یورتانی تجاری شده است که به دلیل آهکی شدن از طول عمر بالایی برخوردار نمی باشد. در این مطالعه، تاثیر بیس فسفنات به عنوان عامل ضد آهکی شدن بر روی دریچه پلیمری آنژیوفلکس نیز مورد بررسی قرار گرفته است.
    کلیدواژگان: دریچه مصنوعی قلب، پلی یورتان، آنژیوفلکس، آهکی شدن، بیس فسفنات
  • سمانه جعفری فرد، سعید باستانی، آتشه سلیمانی گرگانی، مرتضی گنجایی ساری صفحات 61-73
    طی دهه های اخیر پژوهشگران به علت خواص منحصر به فرد پلیمرهای درخت وار بسیار به آنها توجه کرده اند. شکل فضایی کروی، نبود گره خوردگی بین زنجیری و گروه های عاملی انتهایی فراوان روی سطح مولکول، از مهم ترین خواص این ساختارهای پلیمری است. این ویژگی ها باعث ایجاد تفاوت های زیادی میان خواص فیزیکی پلیمرهای درخت وار با پلیمرهای خطی مشابه می شود. از میان این خواص منحصر به فرد، قابلیت جایگزینی گروه های انتهایی و تغییر خواص سطح مولکولی، آن ها را به گزینه ی مناسبی برای بهبود خواص آمیخته های پلیمری مبدل کرده است. پلیمرهای درخت وار به سه گروه بزرگ تقسیم می شوند. درخت پارها، درخت پیوندها و پرشاخه ها. در میان این سه گروه پلیمرهای پرشاخه بیشترین کاربرد را در صنایعی چون رنگ و پوشش و جوهرهای چاپ دارند. در این مقاله افزون بر بررسی ویژگی های پلیمر درخت وار، کاربرد آنها در بهبود خواص رئولوژیکی و پخت آمیخته های پلیمری نیز ارائه شده است.
    کلیدواژگان: پلیمرهای درخت وار، پلیمرهای پرشاخه، درخت پار، شبکه پلیمر، گرانروی
  • مژگان میرزاطاهری، مریم دامغانی، مرضیه مقیسه، آناهیتا هماوند صفحات 74-89
    پلیمریزاسیون رسوبی یکی از جدید ترین روش های پلیمریزاسیون است که به تازگی توجه به آن با هدف تولید میکرو و نانو ذرات پلیمری و هم چنین انواع کوپلیمرها افزایش یافته است. به کمک پلیمریزاسیون رسوبی و نانو ذرات، تولید نانو کامپوزیت های آلی-معدنی با خواص کاتالیستی و شناساگری رو به افزایش نهاده است. پلیمریزاسیون نانو رسوبی نیز زیر شاخه ای از این نوع پلیمریزاسیون است که این روزها در تولید کوپلیمرهای قطعه ای کاربرد یافته است. غلظت شروع کننده و مونومر، نوع ضد حلال و بسیاری دیگر از عوامل تعیین کننده رفتار اینگونه پلیمریزاسیون هستند که در این مقاله اثر این عوامل بر روی پلیمریزاسیون، انواع روش های جداسازی، تئوری های موجود در تولید انواع کوپلیمرها و نانو کامپوزیت های آلی-معدنی ساخته شده به این روش مورد بررسی قرار می گیرند. همچنین در این مقاله مزایای قابل توجه این پلیمریزاسیون نسبت به انواع دیگر از جمله کنترل بهتر روی جرم مولکولی، مورفولوژی ذرات، عدم استفاده از انواع پایدار کننده ها بررسی و نقد می گردد.
    کلیدواژگان: پلیمر شدن رسوبی، پلیمر شدن نانو رسوبی، غیرتراوا، ضد حلال، کوپلیمر قطعه ای
  • رحیم ابراهیمی بریسا، حمیدرضا توکلی صفحات 90-101
    نشاسته ترکیب پیچیده ای از کربوهیدرات های نامحلول در آب است که از دو بسپار آمیلوز و آمیلوپکتین تشکیل شده است. مقاومت کاغذ را می توان از طریق پالایش، پرس تر و مواد افزودنی افزایش داد. پالایش حدود 99- 98 درصد از مقاومت های کاغذ را افزایش می دهد اما روی مقاومت به پارگی اثر معکوس دارد. همچنین بر اثر عملیات پالایش میزان زیادی انرژی مصرف می-شود. مشتقات نشاسته از متداول ترین افزودنی های مقاومت خشک کاغذ به شمار می آیند که امروزه در صنعت کاغذسازی به کار می روند. با استفاده از نشاسته به عنوان افزودنی مقاومت خشک در کاغذسازی پیوندهای هیدروژنی بین الیاف افزایش می یابند و درنتیجه مقاومت و کیفیت کاغذ حاصله نیز بهبود می یابد. الیاف تشکیل دهنده کاغذ اکثرا آنیونی هستند و برای افزایش ماندگاری نشاسته روی الیاف کاغذ، بایستی گروه های کاتیونی به ملکول نشاسته متصل شوند. نتایج نشان داده است که نشاسته کاتیونی در بسیاری از کاغذها باعث افزایش مقاومت های کششی، پارگی و مقاومت به ترکیدن خواهد بود. همچنین نشاسته کاتیونی مزیت هایی مثل قابلیت توزیع خوب، نفوذ زیاد و جذب سطحی زیاد بر روی الیاف را دارد.
    کلیدواژگان: کاغذ، نشاسته، مقاومت خشک، پیوند هیدروژنی، مقاومت به پارگی
  • صفحات 102-105
  • صفحات 106-107
  • صفحات 108-109
  • صفحه 110
  • صفحه 111
  • صفحه 112
|
  • Fatemeh Rezaie, Arezou Soroushnia, Fariba Ganji Pages 3-17
    Oral route is most preferred route by medical practitioners due to acceptability of patients. Due to high blood flow under the oral mucosa, convectional form were replaced by oromucosal drug delivery systems. So oral thin films introduced and marketed as a new dosage form. The advantages of oral thin films are the administration to pediatric and geriatric patient population where the difficulty of swallowing larger oral dosage forms is eliminated. Oral thin films includes polymer, plasticizer, active pharmaceutical ingredient, sweetener, flavoring agent and other necessary additives that are prepared by solvent casting, hot melt extrusion, and rolling. The first and the most essential ingredient is polymer that are synthetic and natural. The most famous natural polymers are pullulan, pectin, starch and chitosan, and synthetic polymers are cellulose derivative, PVA and PVP. Films are usually made of hydrophilic polymers which disintegrate rapidly in buccal cavity. The water-soluble polymers achieve rapid disintegration, good mouth feel and mechanical properties to the films. Depending on the type of film in terms of release behavior and persistence in the mouth, polymers and compounds of them are used in the making of the films. So evaluation of polymers properties for preparing oral films is very important. In this paper we discuss the properties and application of this polymers.
    Keywords: oral film, synthetic polymer, Natural polymer, mechanical properties, release behaviors
  • Mohammad Razavi, Nouri, Masoud Tayefi, Alireza Sabet Pages 18-28
    As we have stated in our previous article, ethylene-octene copolymers are much more branched than high density polyethylene, therefore, they have lower crystallinity and melting point and better processability. In addition, due to the enhancement of the desired physical and mechanical properties of the nanocomposites such as higher thermal stability and tensile properties and lower peamability in comparison with that of the pristine polymer, there is a great tendency in using this calss of materials. The improvement in physical and mechanical properties of the nanoconmposites is mainly origined from the large aspect ratios of the organoclay platelets and the interaction between the nano-sized filler and polymers which can also make the transfer of load from the matix to the filler more efficient. Moreover, the variation of viscosity with shear rate and angular frequency can provide invaluable information on the viscoelastic property of polymer melts as well as the processability of nanocomposites. In continuation to our previous paper, our aim in this article is to give some complementary information about the mechanical properties and rheological behaviors of the above-mentioned nanocomposites by reviewing the recently published papers on this area.
    Keywords: Ethylene, Octene Copolymer, nanocomposite, nanoclay, mechanical properties, rheology
  • Rahim Yadollahi, Mohammad Reza Dehghani Firouzabadi Pages 29-36
    Among bonding methods used in making cellulosic and synthetic Nonwovens depending on the type of product and quality characteristics. Thermal bonding with latex bonding is suitable multiple bonding. latex bonding affected only surface nonwoven. This process is most suitable for webs with a low basis weight. In high basis weight central part of web not created binding, and causing a lead to web delamination but in Thermobonding Not happen this phenomenon and wide range of products can be made with this type of bonding. All thermal bonding methods provide strong bond points that are resistant to hostile environment and to many solvents too. So if you use wood pulp fibers which are biodegradable and environmentally in addition to being bulky fabric, absorbent and soft, also Could be lower price. It is further considered in making nonwovens. The web’s exterior layer receives a light application of latex binder With purpose of primarily dust control to reduce the amount of loose fiber or lint generated in subsequent converting processes. In center of the web is bonded by use of thermoplastic fibers that fuse to the wood pulp. The core of synthetic fibers typically is polypropylene (PP) or polyester (PET) and coated by sheath of polyethylene (PE) with a low melting temperature. The sheath of Synthetic fibers melted The effect of heat and created binding in all regions of the web.
    Keywords: cellulosic, synthetic Nonwovens, multiple bonding, latex, synthetic fibers, Biodegradable
  • Rahim Dehghan, Mojtaba Koosha Pages 48-60
    Prosthetic heart valves or PHV, are the materials that used for patients that required for heart valve substitution. PHVs classified in two main groups, the mechanical and bioprosthetics heart valves. Some problems like coagulation on the mechanical heart valves and poor durability of bioprosthetics heart valves have attracted attentions to promotion of these materials. Nowadays polymeric heart valves presented as a promising material for obviation of some problems in metallic mechanical and bioprosthetics heart valves. Biocompatibility, hemocompatibility, resistance to calcification and degradation are the main factors for polymeric heart valves. Despite some problems like calcification and degradation, polyurethanes are favorable materials for researchers in study on the fabrication of PHVs caused for their excellent mechanical properties. Calcification presented as an important challenge for biostability of polyurethanes in the prosthetics heart valves. Angioflex heart valve is a commercial Polyurethane that have not a suitable longevity caused for the calcification. In this study investigated the effect of bisphosphonate as an anticalcification agent on the angioflex PHVs.
    Keywords: prosthetics heart valve, polyurethane, angioflex, calcification, bisphosphonate
  • Samane Jafarifard, Saeed Bastani, Atasheh Soleimani Gorgani, Morteza Ganjaee Sari Pages 61-73
    Dendritic polymers are a new class of highly branched macromolecules that have received a large amount of attention recently due to their particular properties. The uniqueness of these 3-dimensional polymers is related to the ability to control their size, shape, molecular weight, topology, and surface chemistry to an extent unprec-edented in polymer science. Globular shape, unentanglment structure and a lot of terminal groups on the surface of molecule, are the important properties of these polymer structures. These properties cause main difference between these structures and similar linear polymers. Among special feature of dendritic polymers, the capability of situation of terminal groups, makes dendritic polymers suitable for their improvement role in polymer blends. Dendritic polymers divided into three groups. Dendrimers, dendrigrafts and hyperbranched polymers are these groups and the hyperbrenched polymers have the greatest application in industreis such as paint and coating and printing inks. In this paper, addition to investigate the properties of dendritic polymers, we explain about the effect of these structures on the rheological and curing properties of polymer blends.
    Keywords: dendritic polymer, hyperbrenched polymer, dendrimer, polymer network, viscosity
  • Mozhgan Mirzataheri, Maryam Damghani, Marzieh Moghiseh, Anahita Homavand Pages 74-89
    Precipitation polymerization is almost one of the newest polymerization procedure used for producing micro and nano polymer particles. Even it is favorable for producing various kinds of copolymers or inorganic-organic nanocomposites. Due to catalytic or indicator properties of these materials, precipitation polymerization has find more interested in literature. Nanoprecipitation polymerization is a novel subsection of this kind of polymerization that is used for manufacturing of block copolymers. The scientific behavior of this polymerization depends on many factors such as the initiator and monomer concentration and especially, kind of the used non-solvent, as here the effect of these factors, separation methods and available scientific theories for synthesizing various kinds of copolymers or inorganic-organic nanocomposites are investigated. Also, the advantages of this polymerization in comparison to other kinds of polymerization such as better control on the molecular weight of polymers and polymer particle morphologies, in absence of stabilizers should be analysized, as well.
    Keywords: Precipitation, nanoprecipitation, barrier, non, solvent, block copolymer
  • Rahim Ebrahimi Barisa, Hamidreza Tavakoli Pages 90-101
    Starch is a complex combination of carbohydrates that is insoluble in water and composed from Amylose and Amylopectin. The paper strength increases by refining, wet pressing and additives. Refining increases the paper strength about 98-99 percent but decreases the tear strength. Also more energy is consumed as a result of refining operations. Starch derivatives are considered as a common paper dry strength additives that are used in today's paper manufacturing industry. Using starch as dry strength additives increases the paper hydrogen bonds between the fibers and thus improves the strength and quality of the resulting paper. Constituent fibers of the paper are mostly anionic to increase the durability of the starch on paper’s fiber, starch molecules must bind to cationic groups. Results have shown that cationic starch in paper increases the resistance to rupture, bursting, and tensile strength. Cationic starches have some advantages such as good capability of diffusion, high penetration and high adsorption on the fibers.
    Keywords: Paper, Starch, Dry strength, Hydrogen bond, Tear strength