فهرست مطالب

علوم و فناوری نساجی - سال ششم شماره 3 (پاییز 1396)

فصلنامه علوم و فناوری نساجی
سال ششم شماره 3 (پاییز 1396)

  • تاریخ انتشار: 1396/09/25
  • تعداد عناوین: 6
|
  • سعید شیخ زاده نجار، سید محمد عترتی، علیرضا حسین پور کاسگری *، بهناز خطیر صفحات 5-8
    برای بررسی اثر فشار هوای جت و نوع نازل برداشت بر خواص فیزیکی و مکانیکی نخ های روتور- جت پنبه ای، دو نوع نازل برداشت صاف و چهارشیار انتخاب و پس از نصب نازل جت هوا روی ماشین ریسندگی چرخانه ای، فشار هوا در محدوده 0/2-1/2 barبا بازه 0/2تغییر داده شد. در نهایت، 12نمونه نخ روتور-جت و یک نمونه نخ چرخانه ای معمولی با نمره 20texو با تاب در متر اسمی 943 تولید شد. سپس تغییرات نمره، تاب، پرز، مقاومت سایشی، نایکنواختی، استحکام و ازدیاد طول نخ ها بررسی شد. نتایج تمام آزمون ها با نرم افزار IBM SPSS Statistics 20تجزیه و تحلیل آماری شد. نتایج نشان می دهد، استفاده از نازل جت هوا سبب افزایش تاب در متر، مقاومت سایشی و پرز نخ ها شده است، ولی در نایکنواختی نخ ها تغییری حاصل نشد. به طورکلی استفاده از نازل جت هوا با هر دو نازل برداشت، سبب افزایش استحکام در مقایسه با نخ چرخانه ای شده است.
    کلیدواژگان: نازل جت هوا، نازل برداشت، فشار هوا، ریسندگی چرخانه ای، نخ روتور، جت
  • منا زینل پور یزدی، پدرام پیوندی * صفحات 9-21
    مسئله استتار قرن هاست که به وسیله حیوانات و انسان ها به منظور محافظت خود از دشمن و در واقع راهی برای جلوگیری از دیده شدن هدف توسط مشاهده گر استفاده می شود. در مقاصد نظامی نیز برای تغییر شکل دادن نیروها و تجهیزات در برابر شناسایی دشمن از استتار به عنوان فریب نظامی استفاده می شود. در زمان های قدیم تولید طرح های استتاری توسط هنرمندان و به طور دستی انجام می شد که بسیار زمان بر و پر هزینه بود. امروزه با پیشرفت فناوری و اهمیت داشتن استتاری مناسب، استفاده از روش های پردازش تصویر نظیر فیلترهای بهبود تصویر، فیلترهای تشخیص لبه، شکل شناسی ریاضی، استفاده از روش خوشه بندی k-meansو نیز استفاده از فرکتال سبب افزایش دقت و سرعت تولید این گونه طرح ها می شود. در این بررسی، پژوهش های انجام گرفته در زمینه تولید، ارزیابی و تشخیص استتار با استفاده از روش های پردازش تصویر بررسی شد.
    کلیدواژگان: طرح استتاری، پردازش تصویر، خوشه بندی، فرکتال
  • رامین خواجوی *، نیلوفر رفیع زاده زعیم، زینب اصغرپور، محمد کریم رحیمی صفحات 23-29
    زخم پوشی که محیط زخم را مرطوب نگه دارد، به زخم نچسبد و ضدمیکروب نیز باشد، زخم پوشی پیشرفته به شمار می آید. در این پژوهش، هدف پوشش بستر پلی پروپیلن(PP) برای دستیابی به خواص گفته شده است. نمونه های بی بافت PPبا امولسیون (لیپید-کربوکسی متیل سلولوز-نانوذرات نقره) و امولسیون دارای دارو (موپیروسین، لیدوکائین و بتامتازون) پوشش دهی شدند. نمونه ها با روش های طیف سنجی زیرقرمز تبدیل فوریه (FTI) بررسی شکل شناسی با میکروسکوپ الکترونی پویشی و پروژکتینا شناسایی شدند. همچنین، خاصیت ضدمیکروبی، جذب و نگه داری آب آن ها نیز سنجیده شد. تصاویر میکروسکوپ الکترونی پویشی و پروژکتینا و نتایج طیف سنجی FTIRنشست امولسیون و امولسیون دارای دارو را روی بستر PPتایید کرد، هر دو نمونه پوشش یافته ممانعت صد درصدی رشد دو باکتری گرم منفی E. coliو گرم مثبت S. aureusرا نشان دادند. نتایج حاصل از آزمون ها مربوط به جذب و نگه داری آب حاکی از آن است که در نمونه پوشش یافته با امولسیون زمان جذب (30min) و نگه داری آب (60min) نسبت به نمونه بدون پوشش افزایش یافت. اما، نمونه دارای دارو تفاوت معناداری در دو فاکتور فوق با نمونه پوشش یافته با امولسیون نشان نداد. نتایج نشان داد، پوشش دهی PPبا این امولسیون ها در کنار خاصیت ذاتی PPیعنی عدم چسبندگی، آن را برای کاربردهای پزشکی و به ویژه زخم پوشی بسیار مستعد می کند.
    کلیدواژگان: زخم پوش، کربوکسی متیل سلولز، نانونقره، لیپید
  • علی اکبر مراتی *، حسن حقیرزواره، زهرا خرم طوسی، خسرو معدنی پور صفحات 31-36
    در این پژوهش، با استفاده از فناوری لیف نوری و مهندسی بافت در بافندگی حلقوی پودی، منسوجی تولید شد که قابلیت به نمایش درآوردن تصویری روی سطح آن وجود دارد. اتصال منبع نوری به لیف های 750 μ mپلی متیل متاکریلات موجود در بافت و ایجاد خراش روی آن در نقاط شبکه ای بافت حلقوی پودی، موجب به وجود آمدن نقاط نورانی روی پارچه می شود که چینش با قاعده این نقاط روشن، می تواند شکل تصویر را روی سطح بافت کامل کند. پارامترهایی نظیر گیج ماشین بافندگی، طرح بافت و طول حلقه بررسی و بهینه سازی شد. برای دستیابی به وضوح زیاد نمایشگر، کیفیت مطلوب و روشنایی مناسب تصویر نهایی، عواملی همچون ثبات ابعادی بافت، تثبیت لیف در بافت، نسبت رعنایی و شدت نور مدنظر قرار گرفت. نتایج نشان داد، با نمره نخ 24/2متریک، طرح بافت دورو سیلندر هاف میلانو، گیج های 7سوزن بر اینچ با طول حلقه 8/6 mmسوزن بر اینچ با طول حلقه 7 mmپارامترهای بهینه برای ایجاد درخشندگی، وضوح زیاد، نسبت رعنایی یک و یکنواختی نقاط نورانی به دست می آید.
    کلیدواژگان: منسوج هوشمند، لیف نوری، نمایشگر منعطف، منسوج نمایشگر، بافت حلقوی پودی
  • انسیه تاکی *، ریحانه سادات طباییان، غلامرضا بردبار صفحات 37-43
    مقاله حاضر با هدف بررسی اثر مدیریت راهبردی منابع انسانی بر عملکرد کارخانجات منتخب ریسندگی یزد برای اولین بار در ایران مطالعه شده است. مطالعه مبانی نظری و پیشینه پژوهش نشان می دهد، مدیریت راهبردی منابع انسانی پنج بعد پاداش دهی، مشارکت کارکنان، ارزیابی عملکرد کارکنان، کارمندیابی و آموزش دارد. بنابراین، ارتباط بین هر یک از ابعاد مدیریت راهبردی منابع انسانی به طور کلی با عملکرد شرکت در کارخانجات ریسندگی یزد تجزیه و تحلیل شد. این پژوهش از نظر هدف نوع کاربردی و از نظر ماهیت پیمایشی است که از پرسش نامه برای جمع آوری داده های لازم استفاده شد. همچنین، برای تجزیه و تحلیل داده از نرم افزارهای SPSSو LISRELو برای بررسی فرضیات از آزمون هم بستگی پیرسون استفاده شد. نتایج پژوهش نشان می دهد، مدیریت راهبردی منابع انسانی و ابعاد آن با عملکرد کارخانجات منتخب ریسندگی یزد رابطه مثبت و معناداری دارد.
    کلیدواژگان: مدیریت منابع انسانی، مدیریت راهبردی منابع انسانی، عملکرد شرکت، شرکت های منتخب ریسندگی استان یزد
  • افسانه محرابی * صفحات 45-54
    امروزه تکنولوژی یک سلاح اصلی رقابت بین شرکت ها می باشد. به طوری که موفقیت در جهان امروز به طور آشکار به استفاده از تکنولوژی وابسته است. یکی از زمینه های اعمال مدیریت تکنولوژی که مستلزم این جامع نگری و دورنگری است، انتقال تکنولوژی می باشد. بدین منظور در این تحقیق به شناسایی و رتبه بندی عوامل موثر بر انتقال تکنولوژی در صنعت نساجی، پرداخته شده است. در این تحقیق عوامل موثر بر انتقال تکنولوژی به چهار معیار کلی تقسیم شده است که عبارتند از: ویژگی های دارنده فناوری، ویژگی های سیاست های مشترک دارنده و گیرنده فناوری، ویژگی های فناوری و ویژگی گیرنده فناوری. جامعه آماری را مدیران و خبرگان در صنعت نساجی تشکیل داده اند. در این تحقیق، 30خبره انتخاب شده اند. مطالعه حاضر از لحاظ دسته بندی پژوهش های توصیفی، از نوع پیمایشی به شمار می آید. بزار گردآوری این تحقیق پرسشنامه ای با چهار معیار و 25زیرمعیار بوده است. که با استفاده از روش فرآیند تحلیل سلسله مراتبی (AHP) و روش ،TOPSISبه رتبه بندی متغیرها و راهکارها، پرداخته شده است. نتایج تحقیق نشان داد گیرنده فناوری ، ویژگی های فناوری، دارنده فناوری و سیاست های مشترک به ترتیب رتبه های اول تا چهارم را به خود اختصاص دادند. بالاترین الویت مربوط به هر زیرمعیار نیز به ترتیب، پتانسیل یادگیری، آشنائی با تکنولوژی و بازار، پیچیدگی فناوری، نشت دانش، بوده اند.
    کلیدواژگان: صنعت نساجی، تحلیل سلسله مراتبی، انتقال تکنولوژی، تصمیم گیری چندمعیاره
|
  • Saeed Shaikhzadeh Najar, Alireza Hoseinpour *, Behnaz Khatir Pages 5-8
    In this research, the effects of take-up nozzle and air-jet pressure on the physical and mechanical properties of rotor-jet cotton yarns were investigated. Two types of take up nozzle namely Soft, 4-grooved were used and an air-jet nozzle (90Z) was installed on a rotor spinning machine while air pressure was adjusted in the range of 0.2-1.2 (bar). Finally 12 samples of rotor-jet spun yarns and one sample of rotor spun yarn with linear density of 20 (Tex) and Nominal twist of 943 TPM were produced. The results were then statistically analyzed by IBM SPSS Statistics 20.
    The results show that by using of air-jet nozzle in rotor spinning, twist, abrasion resistance, and hairiness of produced yarns were increased while yarn irregularity changes was in-significant compared to normal rotor yarn. However, by using of soft and 4-grooved nozzles, tensile strength of produced yarns especially at air pressure of 0.4 and 0.6 bar were increased.
    Keywords: Rotor Spinning, Air-Jet Nozzle, Take-up Nozzle, Air Pressure
  • Mona Zeinalpour Yazdy, Pedram Payvandy * Pages 9-21
    Applied camouflage technique in order preventing of sight are used by animals and humans for centuries. In military application camouflage techniques are used for hiding armies and equipment against enemies detection. In the past designing camouflage pattern was done by painting artists which was so costly and time-consuming. However todays by promotion in machine vision techniques such as image processing, designing suitable camouflage pattern can be done by using it. Some of image processing methods which are used in camouflage subjects are image enhancement filters, edge detection filters, mathematical morphology, using k-means clustering as well as the use of fractal dimension. In this paper the studies related to designing, evaluation and detection of camouflage pattern are mentioned and reviewed.
    Keywords: Camouflage pattern, Image Processing, Clustering, Fractal
  • Ramin Khajavi *, Niloofar Rafizadeh Zaeem, Zeinab Assgharpour, Mohammad Karim Rahimi Pages 23-29
    Advanced wound dresses are antimicrobial materials that can keep the wound surroundings moist and do not stick to wound. Therefore, in this research, the purpose is to coat a antimicrobial nanoemulsion on a polypropylene(PP) substrate to achieve the mentioned characteristics. non-woven samples of PP were coated with nanoemulsion (2g lipid, 0.3g carboxymethyl cellulose, 10 ml nanosilver) and drug containing nano emulsion (0.25g mupirocin, 0.25g lidocaine and 0.025g betamethasone). The specimens were characterized by infrared spectroscopy (FTIR), scanning electron microscopy to examine morphological structure, projectina microscopy, antimicrobial tests, water absorption and water maintenance teste. Scanning electron microscopy and projector microscopy and FTIR spectroscopy results confirmed the subsidence of nanoemulsion (EL-CS) and drug containing nano emulsion in the PP substrate, both coated samples ( EL-CS and EL-CSグ) completely inhibited growth of both gram-negative (E-Coli) and positive ( S-Areus) bacterias. The results of water absorption and water maintenance experiments showed that EL-CS coated samples had more absorbtion time (30 min) and water storage (60 min) comparing to non wrapped samples, but the EL-CSグ specimen did not show a significant difference in the two above-mentioned factors comparing to EL-CS. the prepared nanoemulsions and wound dresses obtained from them can have acceptable properties from use in medical appliations.
    Keywords: Wound dresses, Carboxymethyle Cellulose, nano silver, Lipid
  • Ali Akbar Merati * Pages 31-36
    In this research, a knitted fabric is designed and produced using optical fiber technology which is capable of showing a shape or image on its surface. With connecting the 750 micron polymethyl methacrylate optical fiber in the knitted fabric to the light source where the sheath of optical fibers are cut lightly, the bright spots are created on the surface of the knitted fabric. The defined arrangement of the bright spots can form an image on the surface of the fabric. The effective parameters such as the gauge of knitting machine, knit pattern and loop length are tested and optimized. To obtain a high resolution display, high quality and good brightness of the final image, factors such as durability, knit pattern, stability of the fiber in the knit, aspect ratio and the light intensity was considered. The results showed that with a yarn of 24/2 metric count, knit pattern of half-milano, gauge of 7 needle per inch with loop length of 8.6 mm and as same as 10 needles per inch loop with loop length of 7 mm are the optimal parameters for brightness, high resolution, aspect ratio of 1 and uniformity of bright spots.
    Keywords: Intelligence textile, Optical fiber, Flexible display, Display textile, Weft knitting
  • Ensiyehtaki *, Reihaneh Alsadat Tabaeeian, Gholamreza Bordbar Pages 37-43
    The purpose of this paper is studying the relationship between Strategic Human Resource Management (SHRM) and the performance of the firms. The study of theories shows that the SHRM has five dimensions, such as: rewarding, partnership, performance evaluation, recruitment and the quality of training.The purpose of this paper is studying the relationship between Strategic Human Resource Management (SHRM) and the performance of the firms. The study of theories shows that the SHRM has five dimensions, such as: rewarding, partnership, performance evaluation, recruitment and the quality of training Therefore, the relationship between each dimension of SHRM and the performance of the Yazd spinning factories is studied. The scholars of this paper use questionnaires to collect the data. Also in order to analyze the data, the SPSS software, Pearson correlation test and the LISREL are used. The conclusion shows the significant and positive relationship between The SHRM and its dimensions and the performance of the firms.
    Keywords: Human Resource Management, Strategic Human Resource management, the performance of the firms, the Yazd elected spinning factories
  • Afsaneh Mehrabi * Pages 45-54
    Today, technology is a major weapon for competition between companies. In today's world, success in is obviously dependent on the use of technology. One of the areas of technology management that requires this comprehensive and prospect is technology transfer. For this purpose, in this research, the identification and ranking of factors affecting the transfer of technology in the textile industry has been addressed. In this research, the factors affecting the transfer of technology are divided into four general criteria: the characteristics of the technology owner, the characteristics joint policies and technology for owner, the characteristics of technology and the characteristics of the receiver technology. The statistical population consisted of managers and experts in the textile industry. In this research, 30 experts have been selected. The present study is a survey based on the classification of descriptive research. Analytic Hierarchy Process Analysis (AHP) method and TOPSIS method have been used for ranking of variables and strategies. The results of the research showed that the technology receiver, the characteristics of technology, and joint policies and technology for owner were placed in first to fourth priorities The highest priority for each sub-criterion was, respectively: learning potential, familiarity with technology and market, the complexity of technology, and the dissemination of knowledge.
    Keywords: textile industry, hierarchical analysis, technology transfer, multi-criteria decision