فهرست مطالب

مهندسی مخابرات جنوب - پیاپی 34 (زمستان 1398)

نشریه مهندسی مخابرات جنوب
پیاپی 34 (زمستان 1398)

  • تاریخ انتشار: 1398/11/01
  • تعداد عناوین: 7
|
  • طراحی و مدل سازی آنتن های RFID تزویج شده القایی
    زهرا عارف دارابی، سیما هنرمند صفحه 1

    برچسب های شناسایی رادیویی، روش شناسایی منحصر به فرد اشیاء با استفاده از امواج رادیویی است. با استفاده از این فن آوری می توان بدون دخالت انسان  اطلاعات مربوط به تولید، مکان، زمان و مبادلات کالا را جمع آوری نمود. این سیستم از سه بخش برچسب، برچسب خوان و کامپیوتر میزبان تشکیل شده و هدف آنتن در برچسب های شناسایی رادیویی، تزویج ریزتراشه با میدان مغناطیسی تولید شده به وسیله آنتن برچسب خوان است. در این مقاله، آنتن های تزویج شده القایی مربوط به برچسب های شناسایی رادیویی در دو ساختار متفاوت قوسی شکل و پیکربندی بدنه دولایه طراحی و مدلسازی می شود که مقاومت ورودی بالای این ساختارها، باعث تطبیق امپدانس بعضی تراشه های برچسب در فرکانس 915MHz خواهد شد.

    کلیدواژگان: آنتن تزویج شده القایی، تطبیق امپدانس، ساختار قوسی شکل، پیکربندی بدنه دولایه
  • اعمال یک طرح اصلاحی بر روی حوضچه دامنه برای افزایش سرعت و بهبود کیفیت فشرده سازی فرکتالی تصویر
    ژاله مولای زاهدی *، حمید دهقانی، علیرضا ملاح زاده صفحه 2

    در این جا یک طرح حوضچه دامنه اصلاحی برای فشرده سازی فرکتالی تصویر ارایه می کنیم . این طرح به طور اصلاحی حوضچه دامنه را برای هر بلوک برد ، براساس موقعیت آن برد انتخاب می کند . بنابراین یک کتابخانه دامنه موثرتر و کوچکتر برای هر برد ایجاد می شود . این روش باعث کاهش بار محاسباتی و کاهش بیت های مورد نیاز جهت ذخیره موقعیت دامنه می شود . نتایج آزمایش های مختلف روی تصاویر استاندارد نشان می دهد که این روش یک میزان اعوجاج خیلی کمتر و دارای بار محاسباتی بسیار پایین تری است .

    کلیدواژگان: فشرده سازی فرکتالی، حوضچه دامنه متداول، حوضچه دامنه اصلاحی، کاهش بار محاسباتی
  • مدل سازی خط انتقال هوایی در حوزه لاپلاس برای شبیه سازی پدیده تخلیه بازگشتی
    محمدحسین قاسمی *، پیمان نادری، محمدرضا علیزاده پهلوانی صفحه 3

    پدیده تخلیه بازگشتی در خطوط انتقال هوایی ولتاژ بالا زمانی رخ می دهد که موج صاعقه به دکل و یا سیم های محافظ اصابت نماید. در این مقاله در مرحله محاسبه برخورد موج صاعقه به خطوط انتقال هوایی، مدل ها و پارامترهای مستقل از فرکانس برای تجزیه و تحلیل در حوزه لاپلاس به خطوط انتقال هوایی KV 115  اختصاص داده شده و سپس با استفاده از نرم افزار MATLAB به شبیه سازی تفاضل ولتاژ دو سر زنجیر مقره خطوط مورد نظر برای بدست آوردن میزان اضافه ولتاژ پدیده تخلیه بازگشتی خواهیم پرداخت. در پایان مقایسه ای بین نتایج بدست آمده در حوزه لاپلاس با نتایج بدست آمده در حالت وابسته به فرکانس در نرم افزار ATPDraw صورت خواهد گرفت.

    کلیدواژگان: پدیده تخلیه بازگشتی، تجزیه و تحلیل در حوزه لاپلاس، خط انتقال هوایی، موج صاعقه
  • جایابی بهینه منابع تولید پراکنده در شبکه توزیع شعاعی با هدف کاهش تلفات و بهبود پروفیل ولتاژ با استفاده از الگوریتم ژنتیک
    محمد کرمی*، طاهر نیکنام، حاتم محمدی کامروا صفحه 4

    در این مقاله با استفاده از روش محاسباتی و روش  هوشمند الگوریتم ژنتیک GA  به منظور حداقل کردن تلفات و بهبود پروفیل ولتاژ شبکه اقدام به تعیین مکان و اندازه بهینه مولدهای مقیاس کوچک (DG) در شبکه توزیع با ساختار شعاعی شده است. فرض نموده ایم که ژنراتورها قادر به تولید توان اکتیو و راکتیو می باشند و به منظور حداقل کردن تلفات و بهبود پروفیل ولتاژ، مکان و اندازه بهینه مولد مقیاس کوچک با استفاده از روش الگوریتم ژنتیک برای 3 سناریو در چهار حالت مختلف تعیین شده است. نتایج شبیه سازی بر روی شبکه 33 باسه IEEE با ساختار شعاعی نشان می دهد که تلفات شبکه کاهش قابل ملاحظه ای یافته است.

    کلیدواژگان: مولد مقیاس کوچک، جایابی بهینه، الگوریتم ژنتیک، شبکه شعاعی
  • بهینه سازی برنامه ریزی تصادفی ترکیب مزرعه بادی و پمپ ذخیره ای در بازار برق
    مهدی پرهام، سعیدالله مرتضوی صفحه 5

    یکی از مشخصه های اساسی انرژی بادی، تغییرات زیاد و مشکلات پیشبینی آن است که می تواند حتی در برنامه ریزی های کوتاه مدت شبکه قدرت ایجاد مشکل کند.یکی از راه حل های مقابله با این مشکل استفاده از پمپ ذخیره آبی است که می تواند عدم تعادل انرژی یک سیستم را در حالت کمبود و یا ازدیاد انرژی تولید شده بادی جبران نماید. در این مقاله بهینه سازی برنامه ریزی ترکیب مزرعه بادی و پمپ ذخیره ای در بازار برق انجام شده است. مدلسازی الگوریتم بهینه سازی در دو مرحله با قیمت های تصادفی بازار و تولید انرژی بادی صورت گرفته است. نتایج شبیه سازی نشان دهنده کارایی مدل پیشنهادی در برنامه ریزی شبکه برای تامین نیاز مشترکین می باشد.

    کلیدواژگان: برنامه ریزی تصادفی، پمپ ذخیره ای، مزرعه بادی، بازار برق
  • کنترل فازی تطبیقی ربات با مفصل انعطاف پذیر بهینه شده با الگوریتم ژنتیک
    میرسجاد موسوی *، ابراهیم عباس زاده صفحه 6

    ربات بررسی شده در این مقاله یک سیستم مکانیکی متشکل از یک بازو با مفصل انعطاف پذیر با دو درجه آزادی می باشد. در این مقاله یک کنترل کننده فازی تطبیقی برای این مفصل انعطاف پذیر  پیشنهاد شده است. کنترل کننده پیشنهادی از نظر پایداری و حذف اغتشاش بررسی شده است. در ادامه برای دستیابی به حداکثر سرعت در دنبال کردن فرمان های کنترلی، به بهینه سازی پارامترهای موثر در کنترل کننده بوسیله الگوریتم بهینه سازی ژنتیک پرداخته شده است.

    کلیدواژگان: کنترل فازی، کنترل تطبیقی، مفصل انعطاف پذیر، الگوریتم ژنتیک
  • ارایه ی روشی برای موقعیت یابی منبع با استفاده از سنسور های آرایه ای
    نیلوفر حاجی محمدی * صفحه 7

    به منظور ارایه روشی برای موقعیت یابی (منبع) با استفاده از سنسورهای آرایه ای تحقیق حاضر در سال1394 انجام گرفت. برای این منظور جهت موقعیت یابی مکانی از شبکه های مخابرات بی سیم استفاده گردید.الگوریتم هایRSSI و TDOA ، تکنیک های اصلی هستند که در موقعیت یابی منبع با استفاده از گره های سنسور استفاده می شود لذا در این تحقیق چهار گره ی سنسور، روی ریوس یک مربع وگره ی کور در یک نقطه قرار داده شده همچنین موقعیت نقطه ی کور به وسیله ی تخمین گر های LLS و CWLS و روش های SI وSX به دست آمد درالگوریتم ترکیبی که در این تحقیق ارایه می شود درحالتی که منبع به سنسور ها نزدیک باشد و در حالتی که منبع از سنسور ها دور باشد جواب خوبی به دست آمد. می توان به این نتیجه رسید که دقت مکان یابی را با استفاده از روش های ترکیبیTDOA وRSSI و الگوریتم های هوشمند می توان بهبود بخشید.کلید واژه: شبکه های بیسیم ،موقعیت یابی ،اختلاف زمان ورود ،شدت توان دریافتی ،تخمین حداقل مربعات

    کلیدواژگان: اختلاف زمان ورود، شدت توان دریافتی، موقعیت یابی، کلید واژه: شبکه های بیسیم
|
  • Design and Modeling of Inductively Coupled RFID Antennas
    Zahra Aref Darabi*, Sima Honarmand Page 1

    Radio Frequency Identification is the method identifity object  individual by use radiowave. Use this technology we can collect information for production, time and trades. This system is include three section tag, reader and host computer that antenna goal in a RFID tag is couple of chip with reader  magnetic fild. In this paper inductively coupled RFID antennas in two different structures, namely arc-shape and dual-body configurations, are presented. High input resistance can be easily achieved with these structures to realize conjugate impedance matching with some tag chips. 1.99dBi and 5.62dBi directivities at 915MHz are also observed.

    Keywords: Inductively Coupled Antenna, Ampedance Matching, Arc-shape structure, dual-body configuration
  • Apply a correction plan to the domain pond to increase the speed and improve the fractal compression quality of the image
    Jaleh Molaei Zahedi *, Hamid Dehghani, Alireza Malahzadeh Page 2

    Here we present a correction domain pond design for fractal image compression. The plan modifies the domain pool for each block of the board, based on the position of that board. So a more efficient and smaller domain library is created for each page. This method reduces the computational load and reduces the bits required to store the domain position. The results of various experiments on standard images show that this method has a much lower degree of distortion and a much lower computational load.

    Keywords: Fractal Compression, Common domain pond, Correction domain pond, Reduce computational load
  • Modeling of overhead transmission line in Laplace area to simulate the phenomenon of recurrent discharge
    Mohammad Hossein Ghasemi *, Peyman Naderi, Mohammad Reza Alizadeh Pahlavani Page 3

    The phenomenon of reverse discharge in high voltage overhead transmission lines occurs when a lightning wave hits the mast or protective wires. In this paper, in the stage of calculating the impact of lightning wave on overhead transmission lines, models and frequency independent parameters for analysis in Laplace area are assigned to 115KV overhead transmission lines and then using MATLAB software to simulate the voltage difference. We will pay attention to the two ends of the chain of the headquarters of the desired lines to obtain the amount of overvoltage of the reverse discharge phenomenon. Finally, a comparison will be made between the results obtained in the Laplace domain and the results obtained in the frequency-dependent mode in ATPDraw software.

    Keywords: Recurrent discharge phenomenon, Laplace analysis, Air transmission line, lightning wave
  • Optimal placement of distributed generation sources in radial distribution network with the aim of reducing losses and improving voltage profiles using genetic algorithm
    Mohammad Karami *, Taher Niknam, Hatem Mohammadi Kamerva Page 4

    In this paper, using the computational method and intelligent method of GA genetic algorithm in order to minimize losses and improve the network voltage profile, the optimal location and size of small-scale generators (DG) in the distribution network with radial structure has been determined. We have assumed that generators are capable of generating active and reactive power, and in order to minimize losses and improve the voltage profile, the optimal location and size of the small-scale generator have been determined using the genetic algorithm method for three scenarios in four different modes. The simulation results on the IEEE 33-bus network with radial structure show that the network losses have been significantly reduced.

    Keywords: Small scale generator, optimal positioning, Genetic Algorithm, radial network
  • Optimization of random scheduling combining wind farm and storage pumps in the electricity market
    Mehdi Parham, Saeedullah Mortazavi Page 5

    One of the basic characteristics of wind energy is its many changes and prediction problems that can cause problems even in short-term power grid planning.
    One solution to this problem is to use a water storage pump that can compensate for the energy imbalance of a system in the event of a shortage or increase in wind energy. In this paper, the optimization of wind farm and storage pump combination planning in the electricity market has been done. The optimization algorithm is modeled in two stages with random market prices and wind energy production. The simulation results show the efficiency of the proposed model in network planning to meet the needs of subscribers.

    Keywords: Stochastic Planning, Storage Pump, Wind farm, Electricity market
  • Adaptive phase control of robot with flexible joint optimized by genetic algorithm
    Mirsjad Mousavi *, Ebrahim Abbaszadeh Page 6

    The robot studied in this paper is a mechanical system consisting of an arm with a flexible joint with two degrees of freedom. This paper proposes an adaptive phase controller for this flexible joint. The proposed controller is evaluated for stability and perturbation removal. In order to achieve the maximum speed in following the control commands, the effective parameters in the controller are optimized by the genetic optimization algorithm

    Keywords: Phase control, Adaptive control, Flexible joint, Genetic Algorithm
  • Presenting a method for locating sources Using sensor array
    niloofar hajimohammadi * Page 7

    To provide a method for positioning ( source ) Using an array of sensors This study was conducted in 1394 . For this purpose, the positioning location Wireless communications networks were used. Receiver signal strength Indicator (RSSI) and time Difference of Arrival (TDOA) are main techniques that have been used in sensor node localization. Four anchor nodes were placed on corners of a square and the blind folded nod with the sounder at TDOA and RSS measurements was taken by averaging several consecutive readings. Then the blind folded node was localized using the LLS and CWLS estimator and methods of SI and SX. Combined algorithm The research will be presented The case that the source is close to the Sensors And when the source is away from the sensor Was a good answer . In general it can be concluded that positioning accuracy using combined method TDOA and RSS and intelligent Algorithms can be improved. Key word: Sensor array, positioning, Time difference of arrival, Received Signal Strength, Multipath, Line of Sight.

    Keywords: Positioning, Time difference of arrival, Key word: Sensor array, Received Signal Strength