فهرست مطالب

نشریه مهندسی مخابرات جنوب
پیاپی 23 (بهار 1396)

  • تاریخ انتشار: 1396/02/01
  • تعداد عناوین: 6
|
  • بررسی الگوریتم آنالیز انتشار شعاع نوری با تفاضل محدود
    آیت اکبری*، محسن کامیار، نوشین ربیعی، علی بکتر صفحه 0

    هدف ما در این مقاله ارایه ی روش هایی برای بدست آوردن توزیع میدان در نوک فیبر دو هسته ای باریک شده می باشد. از مهمترین این روش ها، روش تفاضل محدود می باشد. برای استفاده از روش تفاضل محدود، دو آنالیز پیش رو داریم یکی آنالیز انتشار شعاع نوری می باشد که هر دو از معادلات موج ماکسول استفاده می کنند.

    کلیدواژگان: نوری، انتشار شعاع نوری موجبرها، دی الکتریک، تفاضل محدود
  • بررسی کاهش هزینه مدیریت تحرک در شبکه های سلولی با استفاده از الگوی حرکتی کاربر
    مهدیه احمدی*، سید علی علویان، علیرضا ملاح زاده صفحه 0

    با افزایش روز افزون کاربران شبکه مخابرات سیار و بدنبال آن کوچکتر شدن سلول ها برای افزایش ظرفیت شبکه ، می توان پیش بینی کرد که رویه های بهنگام سازی موقعیت و فراخوانی بخش عمده ای از ترافیک سیگنالینگ و پهنای باند رادیویی در این شبکه ها را به خود اختصاص خواهند داد. بنابراین روش های مدیریت موقعیت که تبیین کننده دو مقوله بهنگام سازی موقعیت و فراخوانی می باشد در چنین شبکه هایی از مباحث مهم و بحرانی خواهند بود.جهت پیشرفت در عملکرد PBS ، در این پروژه یک روش مدیریت موقعیت جدید کهMPBS (Mobility Pattern Based Scheme)    نام دارد پیشنهاد می شود که اطلاعات زمانی را هم در پروفایل کاربر جای می دهد. به طوریکه موقعیت کنونی کاربر می تواند بوسیله حالت تحرک او و زمان فعلی سیستم معین شود.نتایج بکارگیری مدیریت موقعیت پیشنهاد شده، در طی شبیه سازی نشان می دهند که بار ترافیک سیگنالینگ به طور چشمگیری سبک می شود و در همین حال تاخیر فراخوانی همزمان کاهش می یابد.

    کلیدواژگان: بهنگام سازی موقعیت، مدیریت موقعیت، مناطق موقعیت، مناطق فراخوانی
  • طراحی آپ-امپ با افست پایین و بهره بالا درمبدل آنالوگ به دیجیتال سیکلیک دوازده بیتی جهت سنسور تصویر CMOS
    اصغر ابراهیمی، مینا شیرالی* صفحه 0

    در این مقاله یک مبدل آنالوگ به دیجیتال سیکلیک دوازده بیتی با سرعت و دقت بالا و در این حال توان پایین پیشنهاد شده است.CIS . ها به رنج  دینامیکی وسیع و سرعت بالا و دقت بالا نیازمند است که در این مقاله پیشنهاد شده است.در نهایت این مدار با نرم افزار HSPICE شبیه سازی شد و نتایج قابل قبولی بدست آمده است.این مدار به ولتاژ 3.3 نیاز دارد و در تکنولوژی 0.35 میباشد.توان مصرفی 11 میلی وات و SFDR      معادل 66 دسی بل و THDمعادل2 -و  SNDR معادل 40 دی بی است.سنورهای CIS بهبود یافته با سه تزانزسیتور و ADC سیلیک 12بیتی ستون موازی دارای 5/19 بیت رنج دینامیکی دیجیتال و همچنین دارای انعطاف پذیری بالا برای تنظیمات شرایط متفاوت عکس برداری است .

    کلیدواژگان: مبدل آنالوگ به دیجیتال سیکلیک، SFDR SNDR
  • سحر پویا*، مصطفی اسماعیل بیگ، روزبه حمزه ئیان صفحات 1-9

    از جمله روش های مطرح برای جداسازی چند سیگنال گفتار، که در گیرنده ها با یکدیگر ترکیب شده اند، استفاده از روش های جداسازی کور منابع (BSS) است. جداسازی کور منابع عبارت است از جداسازی و تخمین سیگنال هایی که توسط منابع در یک کانال نامعلوم تولید شده و ترکیبات آنها در گیرنده ها دریافت شده است. الگوریتم های موجود برای جداسازی کور منبع اغلب بر اساس تجزیه ی ویژه ی ماتریس های کومولانت مرتبه ی چهارم است. با این وجود وقتی ماتریس های کومولانت مقادیر ویژه ی نزدیک به هم دارند، بردارهای ویژه ی آن ها نسبت به خطا در تخمین ماتریس ها بسیار حساس می شوند. در این مقاله سعی شده با به کارگیری الگوریتم جدیدی میزان این حساسیت را کاهش داده و به تخمین دقیق تری دست یابیم.

    کلیدواژگان: سیگنال های کور، کومولانت، بردار ویژه، مقادیر ویژه
  • سیده زهرا موسوی*، احمد کشاورز صفحات 23-33

    رادیوگرفی یکی از پرکاربردترین انواع آزمایش های غیر مخرب جوش می باشد، تصاویر رادیوگرافی در حال حاضر توسط انسان تفسیر می شوند، به منظور افزایش دقت و سرعت تفسیر و همچنین کاهش هزینه ها به دنبال راهی جهت تفسیر اتوماتیک این تصاویر جهت تشخیص عیوب جوش می باشیم. مهم ترین مرحله اتوماتیک کردن این فرایند، استخراج صحیح عیوب از تصویر رادیوگرافی می باشد، از اینرو در این مقاله با استفاده از تکنیک های پردازش تصویر راهکار جدیدی را جهت استخراج عیوب از ناحیه جوش اریه می دهد. در روش پیشنهادی بعد از جداسازی ناحیه جوش با استفاده از تطبیق هیستوگرام واعمال فیلتر وینر به بهبود کیفیت تصویر و حذف نویزهای موجود پرداخته، پس از آن به منظور استفاده بهینه از اطلاعات تصویر در جهات مختلف، از تبدیل موجک تصویر استفاده کرده و سپس با اعمال تکنیک هایی نظیر آستانه گذاری محلی، عملیات مورفولوژی و لبه یابی روی جزهای حاصل از تبدیل ویولت به استخراج ناحیه عیب تصاویر پرداخته خواهد شد.

    کلیدواژگان: تصویر رادیوگرافی، ناحیه جوش، عیوب جوش
  • فاطمه شبیه*، جلیل عظیم پور، مرضیه دادور صفحات 53-68

    شبکه های حسگر بیسیم دارای تعداد زیادی گره حسگر با انرژی محدود می باشند که در یک منطقه محدود جغرافیایی پراکنده شده اند. با توجه به محدودیت منابع در شبکه های حسگر بیسیم، افزایش طول عمر این شبکه ها با کاهش مصرف انرژی همواره مورد توجه است. انرژی گره ها بیشتر برای ارسال اطلاعات به ایستگاه مرکزی مصرف می شود. در مسیریابی پی در پی بر مبنای خوشه بندی، این مسیولیت بر عهده سرخوشه ها است و این امر موجب افزایش مصرف انرژی در سرخوشه ها می شود. در سال های اخیر برای دیرتر تمام شدن انرژی سرخوشه ها، پروتکل های خوشه بندی و مسیریابی های زیادی پیشنهاد شده است. هدف این پژوهش، ترکیب خوشه بندی و مسیریابی در راستای افزایش طول عمر این نوع شبکه هاست. برای خوشه بندی از الگوریتم ژنتیک با تعداد خوشه های ثابت و برای مسیریابی از الگوریتم جستجوی هارمونی استفاده شده است. از آنجاییکه سرخوشه ها انرژی بیشتری نسبت به دیگر    گره ها برای ارسال اطلاعات مصرف می کنند، هدف الگوریتم ژنتیک کاهش تعداد سرخوشه ها در جهت افزایش طول عمر شبکه می باشد. در سفارشی کردن الگوریتم جستجوی هارمونی برای مسیریابی، سه معیار همسایگی، کاهش مصرف انرژی و توزیع مناسب مصرف انرژی در نظر گرفته شده است. الگوریتم هارمونی پیشنهادی با برقراری توازن مناسب بین معیارهای ذکرشده باعث تولید مسیرهای بهینه تری خواهد شد. در نهایت تغییر سرخوشه ها در هر دور مسیریابی باعث ایجاد توازن مصرف انرژی بین گره های هر خوشه خواهد شد. نتایج حاصل شده از آزمایشات، حاکی از برتری 14/2% الگوریتم پیشنهادی در ارسال پیام و همچنین افزایش 84/24% طول عمر شبکه نسبت به پروتکل DEEC می باشد.

    کلیدواژگان: شبکه های حسگر بیسیم، طول عمر شبکه، خوشه بندی، الگوریتم ژنتیک، الگوریتم جستجوی هارمونی
|
  • Investigation algorithm of optical radius diffusion analysis with finite difference
    Ayat Akbari *, Mohsen Kamyar, Nooshin Rabiee, Ali Bekter Page 0

    Our aim in this paper is to provide methods for obtaining the field distribution at the tip of a narrowed dual-core fiber. One of the most important of these methods is the finite difference method. To use the finite difference method, we have two analyzes, one is light scattering analysis, both of which use Maxwell wave equations.

    Keywords: Optical, propagation of light wavelength of waveguides, dielectric, Finite difference
  • Investigation of cost reduction of mobility management in cellular networks using user movement model
    Mahdiyeh Ahmadi *, Seyed Ali Alaviyan, Alireza Malahzadeh Page 0

    With the increasing number of mobile network users and the consequent shrinkage of cells to increase network capacity, it can be predicted that position updating procedures and calling a large part of the signaling traffic and radio bandwidth in these networks Will allocate. Therefore, position management methods that explain the two categories of position updating and calling will be important and critical issues in such networks. To improve PBS performance, in this project, a new position management method called MPBS (Mobility Pattern Based Scheme) It is suggested that it also include time information in the user profile. The current position of the user can be determined by his mobility and the current time of the system. The results of using the proposed position management, during the simulation show that the signal load traffic is significantly lightened while reducing the simultaneous call delay. Finds.

    Keywords: SITUATION UPDATE, SITUATION MANAGEMENT, SITUATION AREAS, CALL AREAS
  • Low-offset and high-gain up-amp design in analog to digital cyclic converter Twelve bits for CMOS image sensor
    Asghar Ebrahimi, Mina Shirali * Page 0

    In this paper, an analog-to-digital twelve-bit cyclic converter with high speed and accuracy and yet low power is proposed. Requires a wide dynamic range and high speed and high accuracy, which is suggested in this article. Finally, this circuit was simulated with HSPICE software and acceptable results were obtained. This circuit requires a voltage of 3.3 and in The technology is 0.35. The power consumption is 11 mW and the SFDR is 66 dB and the THD is 2 - and the SNDR is 40 dB. Shooting for different setting conditions.

    Keywords: Analog to Digital Cyclic Converter, SFDR SNDR
  • Sahar Pouya *, M .Esmail Beyg, R. Hamzehyan Pages 1-9

    One of the proposed methods for separating several speech signals, which are combined in receivers, is the use of blind source separation (BSS) methods. Resource blind separation is the separation and estimation of signals generated by sources in an unknown channel and their combinations received at receivers. Existing algorithms for blind source separation are often based on the special analysis of fourth-order cumulative matrices. However, when cumulative matrices have close eigenvalues, their eigenvectors become very sensitive to the error in estimating the matrices. In this paper, we try to reduce this sensitivity by using a new algorithm and obtain a more accurate estimate.

    Keywords: Blind signals, Cumulative, Eigenvector, Eigenvalues
  • Zahra Mousavi *, Ahmad Keshavarz Pages 23-33

    Radiography is one of most common methods for testing the quality of weld. At present radiographic images are interpreted by humans. In order to increase accuracy and speed of interpretation and costs decrease ,We are looking for a way to automatic detect of weld defects. The correct extraction of defects is The most important step to automatic processing.  Therefore ,in this paper a new strategy to extract the weld defects using image processing techniques is proposed.  In the proposed method after segmentation Region Of Interest (ROI), histogram matching and Weiner filter were used to remove noise and enhance the quality of image, then For optimum utilization of image data in different directions, Wavelet transform is used. Afterward by applying techniques such as local thresholding, morphology and edge detection on the components of the wavelet transform defect area of Radiography images was extracted

    Keywords: Radiography images, Weld area, weld defects
  • Fatemeh Shabih *, Jalil Azimpour, Marziye Dadvar Pages 53-68

    Wireless sensor networks are a large number of sensor nodes with limited energy in a scattered geographically limited area. Due to limited resources in wireless sensor networks, increasing the lifetime of the networks by reducing energy consumption is always considered. More nodes to send data to the central station energy consumption. Sequential routing based on clustering, this responsibility falls on the head, and this increases the energy consumption of cluster heads. In recent years later all the energy of cluster heads, routing protocols and a lot of clustering is proposed. The purpose of this study, the combination of clustering and routing in order to extend the lifetime of this type of network. For clustering of genetic algorithm with fixed and harmony search algorithm is used for routing. Customize search algorithm for routing in harmony, three criteria neighborhood, reducing energy consumption and proper distribution of energy consumption is taken into account. Harmony algorithm is proposed to establish a proper balance between the criteria listed will generate more efficient routes. Finally change the routing cluster heads in each round will be balancing energy consumption between nodes per cluster. The results of the tests show the superiority of 2.14% proposed increase in messaging as well as 24.84% Lifetime network protocol is DEEC.

    Keywords: Wireless Sensor Networks, Network lifetime, Clustering, Genetic Algorithm, harmony search algorithm