فهرست مطالب

مجله عمران و پروژه - سال چهارم شماره 6 (پیاپی 40، شهریور 1401)

عمران و پروژه
سال چهارم شماره 6 (پیاپی 40، شهریور 1401)

  • تاریخ انتشار: 1401/06/22
  • تعداد عناوین: 3
|
  • علی قربانی، زینب نورمرادی* صفحات 11-24

    بررسی ویژگی های فنی، اجتماعی، زیست محیطی ،جغرافیایی و نیز اقتصادی در فرایند پروژه های آب و فاضلاب در مقیاس گسترده ضروری می باشد . هدف از این پژوهش شناسایی و رتبه بندی ریسک های آب و فاضلاب در استان ایلام نیز می باشد. در این پژوهش با استفاده از مطالعات کتاب خانه ای عمیق به شناسایی ریسک در چرخه حیات و با استفاده از روایی محتوا CVR به حذف فاکتور های غیر مرتبط پرداخته شده است . سپس با طراحی پرسشنامه و جامعه اماری 40 نفره از کارشناسان آب و فاضلاب که با استفاده ازفرمول کوکران تعیین گردیده است به بررسی اثر اهمیت عامل های ریسکی در چرخه حیات پروژه پرداخته شده است. . در این پژوهش پایایی درونی سازه 76/ 0 که که حاکی از همسانی درونی خوبی بوده است می باشد. سپس با استفاده از آزمون فریدمن به رتبه بندی ریسک ها پرداخته شده است که در این پژوهش ریسک های عدم وجود نقشه ها و دتایل های اجرایی و عدم طراحی صحیح و نیاز به تغییرات در مرحله اجرا نسبت به طرح بیشترین اهمیت ریسکی و تغییرات را برخوردار بوده است . سپس برای اولویت بندی مراحل چرخه حیات پروژه با استفاده از تکنیک AHP و جامعه خبرگان (5 الی 7 نفره)به بررسی مراحل چرخه حیات با الترناتیو های ایمنی - هزینه - زمان پرداخته شده است که نتایج نشان می دهد طراحی و برنامه ریزی بالاترین اولویت و استقرار کمترین اهمیت را در این پژوهش به خود اختصاص داده اند.

    کلیدواژگان: شناسایی، رتبه بندی، ریسک، چرخه حیات، آب و فاضلاب
  • حسین صمدیار* صفحات 25-32
    بتن های معمولی که با روش های سنتی، طراحی، مخلوط ، حمل و عمل آوری می شوند، نمی توانند جهت دستیابی به مشخصات مورد نظر برای کاربردهای ویژه و یا برای دستیابی به الزامات خاص، کاربرد داشته باشند. مقاومت به تنهایی نمی تواند جوابگوی کلیه خواص مربوط به بتن بخصوص دوام آن باشد و لازم است در طراحی بتن برای مناطق مختلف علاوه بر مساله مقاومت و تحمل بارها در طول مدت بهره دهی، پایایی و دوام آن نیز مد نظر قرار گیرد. در سالهای اخیر بر روی آرماتور مصرفی در سازه های بتنی مسلح نیز تحولاتی در بتن در راس برنامه های تحقیقاتی پاره ای از کشورهای جهان قرار گرفته است. نظر اکثر کارشناسان و دستاندرکاران کارهای بتنی به این مساله جلب شده است که مقاومت به تنهایی نمیتواند جوابگوی کلیه خواص مربوط به بتن بخصوص دوام آن باشد و لازم است در طراحی بتن برای مناطق مختلف علاوه بر مساله مقاومت و تحمل بارها در طول مدت بهره دهی، پایایی و دوام آن نیز مد نظر قرار گیرد. در سالهای اخیر تحول عظیمی در تکنولوژی بتن و پیدایش بتنهای جدید صورت گرفته است.
    کلیدواژگان: مقایسه، بتون، سنتی، نسل جدید
  • عیسی تقی زاده* صفحات 33-46

    امروزه شرکت های عمرانی با فضای جدیدی مواجه هستند. شرکت های ساخت و عمرانی کشور ایران از پایین بودن بهره وری رنج می برند و بسیاری از مدیران تلاش هایی جهت یافتن راه کارهای مناسب برای رفع این مشکل داشته اند. به نظر می رسد استفاده از سیستم های اطلاعات مدیریت پروژه به منظور بهبود مدیریت مدیران و افزایش بهره وری آنان، می تواند یکی از این راه کارها باشد. اما به دلیل ویژگی های خاصی که برای این شرکت های ساخت و عمرانی حاکم می باشد، به ویژه مسایل و مشکلاتی که از نیروی انسانی شاغل در آنها (اعم از مدیران و کارکنان) وجود دارد، کاربرد این ابزار به سادگی امکان پذیر نیست و در عمل نیز مشاهده گردیده که کمتر شرکتی بوده است که توانسته باشد از این سیستم های اطلاعات مدیریت پروژه به نحو کارآمدی استفاده نموده باشد. لذا در صورتی که بتوان با انجام تحقیقاتی، مولفه های اساسی در پیاده سازی سیستم اطلاعات مدیریت پروژه در پروژه های انبوه سازی ساختمانی را شناسایی کرده و راه کارهایی برای استفاده اثربخش از این سیستم های اطلاعات مدیریت پروژه ارایه نمود، قطعا گام مفیدی در حل معضلات شرکت های ساخت برداشته شده است. پژوهش حاضر با هدف بررسی تاثیر پیاده سازی سیستم های اطلاعات مدیریت پروژه را بر موفقیت پروژه های عمرانی که شامل بهبود مولفه های کیفیت، هزینه و زمان انجام پروژه است بسته به ابعاد محتوایی کیفیت سیستم های اطلاعات مدیریت پروژه که خود نیز شامل مولفه های دقت، مربوط بودن و کامل بودن اطلاعات است را در پروژه های انبوه سازی شرکت کارا سازه متین بررسی و کنکاش می کند.

    کلیدواژگان: سیستم اطلاعات مدیریت پروژه (PMIS)، کیفیت سیستم های اطلاعات مدیریت پروژه، مدیریت پروژه، سازمان های پروژه محور، شبکه های عصبی مصنوعی (ANN)
|
  • Ali Ghorbani, Zeinab Noormoradi * Pages 11-24

    Examining the technical, social, environmental, geographic, and economic features is necessary in the process of water and sewage projects on a large scale. The purpose of this research is to identify and rank water and sewage risks in Ilam province. In this research, using in-depth library studies to identify risk in the life cycle and using CVR content validity to remove irrelevant factors. Then, by designing a questionnaire and a statistical community of 40 water and sewage experts, which was determined using Cochran's formula, the effect of the importance of risk factors in the life cycle of the project was investigated. . In this research, the internal reliability of the structure is 0.76, which has established a good internal consistency, then using the Friedman test, the risks have been ranked, and in this research, the risks of lack of plans and executive details, lack of proper design, and the need The changes in the implementation phase compared to the plan have the most important risk and changes. Then, in order to prioritize the life cycle stages of the project, using the AHP technique and a community of experts (5 to 7 people), the life cycle stages have been examined with safety-cost-time alternatives, and the results show that design and planning have the highest priority and They have attributed the least importance to the establishment in this research.

    Keywords: Identification, Ranking, risk, life cycle, Water, Sewage
  • Hossein Samadyar * Pages 25-32
    Conventional concretes, which are designed, mixed, transported and processed by traditional methods, cannot be used to achieve the desired specifications for special applications or to achieve specific requirements. Strength alone cannot answer all the properties related to concrete, especially its durability, and it is necessary to consider its reliability and durability in addition to the issue of resistance and bearing loads during the service life of concrete for different areas. In recent years, on the reinforcement used in reinforced concrete structures, developments in concrete have been placed at the top of the research programs of some countries of the world. The opinion of most experts and practitioners of concrete works has been drawn to this issue that strength alone cannot answer all the properties of concrete, especially its durability, and it is necessary to design concrete for different areas in addition to the issue of resistance and bearing loads during the service life. Its reliability and durability should also be considered. In recent years, there has been a huge change in concrete technology and the emergence of new concretes.
    Keywords: Comparison, Concrete, traditional, new generation
  • Isa Taqizadeh * Pages 33-46

    Construction companies today are facing a new environment. Iranian construction and construction companies suffer from low productivity and many managers have struggled to find appropriate solutions to this problem. It seems that using project management information systems to improve managers' management and increase their productivity could be one of these solutions. But because of the special features that govern these construction and development companies, especially the problems of the human resources (including managers and employees), it is not possible to apply this tool in practice and to observe it in practice. It has become less of a company that has been able to use these project management information systems efficiently. Therefore, if research can identify the key components in implementing a project management information system in bulk construction projects and provide solutions for the effective use of these project management information systems, it will certainly be a useful step in solving corporate problems Construction removed. The present study aims to investigate the impact of implementing project management information systems on the success of project development projects, which include improving the quality, cost and time components of the project depending on the content dimensions of the quality of the project management information systems, which also include the accuracy components. Examines and explores the relevance and completeness of the information in Kara Sazeh Matin's bulk projects.

    Keywords: Project Management Information System (PMIS), Quality of Project Management Information Systems, project management, Project-Based Organizations, Artificial Neural Networks (ANN)