فهرست مطالب

عمران و پروژه
سال چهارم شماره 7 (پیاپی 41، مهر 1401)

  • تاریخ انتشار: 1401/07/01
  • تعداد عناوین: 3
|
  • سید محمدصادق رسولی*، امیرحسین بازایی، روزبه آقامجیدی صفحات 11-16

    برآورد ضریب زبری منینگ از اهمیت و حساسیت بالایی برخوردار است. در مطالعه حاضر مسافت 56 کیلومتری از رودخانه بشار در استان کهگیلویه و بویراحمد مورد مطالعه قرار گرفت. دسترسی انتخاب شده بر اساس ویژگی های مشابه به 12 زیرشاخه تقسیم شد. برای برآورد ضریب منینگ از روش های تجربی و شبه تجربی، جداول و روش کوان استفاده شد. نتایج تخمین با منحنی های رتبه بندی دبی مرحله ای از دو ایستگاه هیدرومتری واقع در محدوده انتخاب شده مقایسه شد. "راه حل معکوس" به عنوان بهترین روش برای تخمین ضریب منینگ در رودخانه تحت مطالعه و به دنبال روش بروشین و کوان با میانگین خطای 0.237 و 0.241 به ترتیب ثابت شد.

    کلیدواژگان: ضریب منینگ، روش حل معکوس، رودخانه بشار، HEC-RAS
  • فهیمه محمدپور، علی قربانی* صفحات 17-27
    استراتژی ترین صنعت هر کشور، صنعت ساختمان آن می باشد که همواره مورد توجه حکومت های مختلف بوده است. با این حال همواره قشر ضعیف در آن (کارگر) مورد بی مهری قرار می گیرد و حقوق آن نادیده گرفته می شود. پژوهش های چند سال اخیر نشان می دهد که اگر توجه ویژه به کارگر صورت نپذیرد خلل متعددی به شرایط محیطی پروژه ساختمانی وارد می شود. خلل های جبران ناپذیری که می بایست به ابعاد حقوقی، اخلاقی و فرهنگی آن توجه ویژه ای نمود. بدین جهت هدف از انجام پروژه مذکور اتخاذ بهترین راهبرد به جهت افزایش بهره وری کارگر و کارگاه ساختمانی می باشد. در این تحقیق از روش همبستگی و همچنین تکنیک ANP استفاده شد. نتایج تحقیق نشان می دهد که زمانی می توان اذعان نمود که پروژه ساختمانی بهبود کیفی پیدا نموده است که صرفا به توسعه فیزیکی توجه نگردد، و قشر کارگر و تضمین حقوق آن ها مورد توجه قرار بگیرد. محققین با بررسی متغیرهای تحقیق و قراردهی در شبکه تصمیم گیری ANP متوجه شده اند که تضمین حقوق کارگر مهمترین پارامتر برای توسعه آتی پروژه ساختمانی می باشد.
    کلیدواژگان: بهره وری ساختمان، مدیریت منابع انسانی، حقوق کارگر، مدیریت زمان، توسعه گرایی
  • علیرضا درودیان همایونی، عباس قاسمی* صفحات 28-49
    روش طراحی مستقیم مبتنی بر تغییرمکان که توسط پریستلی و همکاران معرفی و گسترش داده شده است، یکی از روش های عملکردی است که قابلیت آن را دارد تا بتواند جانشین روش طراحی براساس نیرو شود. تخمین میرایی هیسترزیس و تغییرمکان تسلیم از جمله پارامترهای کلیدی این روش میباشند که خطا در برآورد آنها منجر به خطای کلی در برآورد برش پایه میشود. در این مطالعه 10 قاب فولادی خمشی همراه مهاربند هشتی و زیپی کوتاه و متوسط مورد بررسی و ارزیابی لرزهای قرار گرفته است. طیف وسیعی از تحلیلها مشتمل بر تحلیلهای دینامیکی غیرخطی و تحلیلهای استاتیکی غیرخطی براساس الگوهای متفاوت، منظور می شوند. تغییرمکان تسلیم، میرایی، زمان تناوب موثر، زمان تناوب سکانتی و برش پایه قابهای خمشی فولادی همراه مهاربند هشتی و زیپی مذکور محاسبه و با روابط ارایه شده در پیشنویس آییننامه DBD12 صحتسنجی شده است. در نهایت با پیشنهاد روابطی برای میرایی و تغییرمکان تسلیم نسبت به بهبود عملکرد مبتنی بر روش طراحی جابجایی مستقیم در قابهای خمشی فولادی به شرح ذیل اقدام گردیده است. با توجه به نتایج حاصله، به نظر می رسد رابطه پیشنهادی پریستلی از ضریب اطمینان بالاتری برخوردار بوده و منتج به طراحی سازه های غیر بهینه خواهد شد. با تغییر تعداد دهانه، میزان میرایی تغییر محسوسی نمی یابد و در بحرانی ترین حالت با افزایش تعداد دهانه ها، میزان میرایی 3 درصد تغییرمی یابد.
    کلیدواژگان: تغییرمکان مستقیم، طراحی عملکردی، تحلیل غیرخطی، میرایی
|
  • S.MohamadSadegh Rasooli *, Amirhossein Bazaee, Roozbeh Aghamajidi Pages 11-16

    Affected by numerous elements, the estimation of manning's roughness coefficient is of great importance and sensitivity. In the present study a reach of 56 km from beshar river in kohgiluyeh and boyer-ahmad province was studied. The selected reach was divided into 12 sub-reaches based on similar characteristics. Experimental and quasi-experimental methods, tables, and cowan's method were used to estimate manning's coefficient. The estimation results were compared with stage-discharge rating curves from two hydrometric stations located in the selected reach. The ‘inverse solution’ was proved to be the best method to estimate manning's coefficient in the river under study followed by bruschin and cowan's method with an average error of 0.237 and 0.241, respectively.

    Keywords: Manning's coefficient, Inverse Solution Method, Beshar River, HEC-RAS
  • Fahime Mohamadpour, Ali Ghorbani * Pages 17-27
    The most strategic industry of any country is its construction industry, which has always been the focus of different governments. However, the weak group (the worker) is always disrespected and its rights are ignored. The researches of the last few years show that if special attention not paid to the worker, there will be many disturbances to the environmental conditions of the construction project. Irreparable defects that should be paid special attention to its legal, moral and cultural dimensions. Therefore, the goal of this project is to adopt the best strategy for increasing the productivity of the worker and ultimately the construction site. In this research the correlational research method as well as the ANP technique have used. According to the results the construction project has been qualitatively improved when the physical development, the working class and the guarantee of their rights paid attention. By examining the variables of research and placement in the ANP decision-making network, the guarantee of worker's rights is the most important parameter for the future development of the construction project.
    Keywords: Building productivity, Human Resource Management, Labor rights, time management, Development
  • Alireza Doroudian Homayouni, Abbas Ghasemi * Pages 28-49
    The direct displacement-based design method introduced and expanded by Priestley et al. is one of the functional methods that has the ability to replace the force-based design method. Estimation of hysteresis damping and displacement of yielding are among the key parameters of this method, the error in their estimation leads to the overall error in the estimation of base shear. In this study, 10 bending steel frames with vestibular braces and short and medium zippers have been investigated and evaluated for tremors. With a wide range of analyses, including non-linear dynamic analyses of time history based on natural accelerometers, as well as wear analysis based on different patterns, yielding displacement, damping, effective cycle time, secant cycle time and base shear of the steel bending frames with the above-mentioned hip brace and zipper are analysed. And the relationships presented in the DBD regulations have been verified. Finally, by proposing relationships for damping and displacement of yielding, in relation to improving the performance of the direct design method based on displacement in steel bending frames, it has been done as follows. Given that increasing damping, it underestimates the forces applied to the structure. It seems that Priestley's formula is presented with a higher reliability factor and results in the design of harder and heavier structures, in terms of the amount of steel consumption. The amount of damping is not very sensitive to the changes in the number of openings and in the worst case, the damping has a difference of 3% with the increase in the number of openings.
    Keywords: Direct displacement, Nonlinear analysis, Zipper braced frames, Damping Ratio