فهرست مطالب

مجله بهداشت و ایمنی کار
سال چهاردهم شماره 4 (زمستان 1403)

  • تاریخ انتشار: 1403/09/11
  • تعداد عناوین: 12
|
  • سید محمدجواد گل حسینی، محسن علی آبادی*، رستم گلمحمدی، مریم فرهادیان، مهدی اکبری صفحات 692-715
    مقدمه

    علی رغم وجود مطالعات فراوانی در مورد افت شنوایی ناشی از مواجهه با صدای شغلی (NIHL)، مستندات محدودی در ارتباط با تاثیر مواجهه با ارتعاش بر سیستم شنوایی شاغلین وجود دارد. رانندگان ماشین آلات سنگین، به طور هم زمان با سطوح بالایی از صدا و ارتعاش تمام بدن (WBV) مواجهه داشته و بنابراین در ریسک بالایی از NIHL قرار دارند؛ با این حال، سهم اثرگذاری WBV بر عملکرد سیستم شنوایی آنان در هاله ای از ابهام می باشد. بنابراین، هدف از این مطالعه، بررسی پاسخ شنیداری رانندگان ماشین آلات سنگین، در مواجهه با WBV و همچنین مواجهه هم زمان با صدا و WBV می باشد.

    روش کار

    تعداد 30 نفر مرد از رانندگان ماشین آلات سنگین با میانگین سنی 91/4±40/32 سال در این مطالعه که بر اساس مدل اندازه گیری های مکرر طراحی شده بود، شرکت داشتند. در طول 3 سناریوی تعریف شده: مواجهه با WBV، مواجهه هم زمان با صدا و WBV و همچنین سناریوی بدون مواجهه، پاسخ شنیداری رانندگان با استفاده از گسیل های صوتی اعوجاجی گوش (DPOAE)، مورد بررسی قرار گرفت. تحلیل های آماری مربوطه توسط نرم افزار SPSS-25 صورت پذیرفت.  

    یافته ها

    محدوده صدای درون اتاقک ماشین آلات سنگین، 89-83 دسی بل و بیشترین مواجهه رانندگان با WBV در محور Z با میانگین شتاب m/s2 29/1 به دست آمد. دامنه DPOAE رانندگان در هر سه سناریو، تغییرات معناداری را در طول روز نشان داد (P<0.05)؛ ولی در مقایسه بین سناریوها، مواجهه با WBV و مواجهه هم زمان با صدا و WBV، دارای تاثیر قابل توجهی در پاسخ سیستم شنوایی رانندگان، نسبت به سناریوی بدون مواجهه بود (P<0.05). همچنین اختلاف معناداری در تغییرات دامنه DPOAE در فرکانس های مختلف وجود داشت؛ بگونه ای که بیشترین تغییرات دامنه DPOAE در فرکانس های محدوده 4000 هرتز مشاهده گردید.

    نتیجه گیری

    نتایج این مطالعه تایید کننده پیامدهای منفی مواجهه با صدا و WBV بر روی پاسخ شنیداری موردبررسی در این پژوهش بود؛ ضمن اینکه شواهدی مبنی بر اثرات آسیب زای مواجهه تنها با WBV بر سیستم شنوایی رانندگان ماشین آلات سنگین ارائه نمود.

    کلیدواژگان: ارتعاش تمام بدن (WBV)، صدا، رانندگان ماشین آلات سنگین، DPOAE
  • فرزاد خلیلی، افشین مرزبان*، محمود قاسمی نژاد رائینی، عبدالله حیاتی صفحات 716-735
    مقدمه

    نیشکر محصولی مهم و استراتژیک در بسیاری از کشورها از جمله ایران است. با وجود این که با ورود مکانیزاسیون و ماشین های دروگر نیشکر، فرآیند تولید این محصول بهبود چشمگیری پیدا کرده است، اما کاربران این دروگرها، با مشکلات ارگونومیکی و ایمنی متعددی مواجه هستند.

    روش کار

    در مطالعه حاضر، وضعیت موجود ارگونومیکی کاربران دروگر نیشکر، با بررسی برخی ارزیابی های فیزیولوژیکی و فیزیکی آن ها انجام شد. ارزیابی های فیزیولوژیکی شامل ضربان قلب، دمای دهانی، انرژی مصرفی کاربر، شاخص های استرین گرمایی (شاخص استرین ادراکی و شاخص استرین فیزیولوژیکی) و ارزیابی فیزیکی شامل برآورد میزان درد و ناراحتی اعضای بدن بود. همبستگی بین درد و ناراحتی اعضای بدن با برخی شاخص های دموگرافیکی و فیزیولوژیکی کاربران با استفاده از نرم افزار IBM SPSS 24 مورد بررسی قرار گرفت.  

    یافته ها

    میانگین ضربان قلب، انرژی مصرفی و شاخص استرین فیزیولوژیکی کاربران دروگر نیشکر به ترتیب 05/79 ضربه بر دقیقه، 81/18 کیلوژول بر دقیقه و 83/0 به دست آمد. میانگین سه شاخص احساس گرمایی، شدت فعالیت اعمال شده ادراکی و شاخص استرین ادراکی به ترتیب 40/4، 21/9 و 86/8 برآورد شد. همچنین، سابقه گرمازدگی، آسیب دیدگی حین کار و مشکلات عضلانی-اسکلتی بین کاربران مورد مطالعه به ترتیب 56%، 48% و 48% بدست آمد. سطح تحصیلات با درد و ناراحتی در تمامی اعضای بدن ارتباطی منفی (معنادار یا غیرمعنادار) برقرار کرده بود؛ به این معنی که افراد با سوادتر درد و ناراحتی کمتری داشتند و بالعکس.

    نتیجه گیری

    درد و ناراحتی در نواحی گردن و کمر بین کاربران دروگر نیشکر همچون بسیاری از فعالیت های کشاورزی، مقادیر بالاتری را نسبت به سایر اعضای بدن به خود اختصاص داد. علاوه بر این، همبستگی معنادار درد و ناراحتی در برخی نواحی بدن با ابعاد فیزیکی کاربران (قد و جرم) نشان دهنده ارتباط مشخصه های آنتروپومتریکی افراد با میزان بدن درد است. در این خصوص باید گفت درد و ناراحتی در برخی نواحی بدن بین کاربران کوتاه قامت تر و لاغرتر بالاتر بود.

    کلیدواژگان: ارزیابی وضعیت موجود، شاخص های فیزیولوژیکی، مکانیزاسیون کشاورزی، ناراحتی بدن
  • مریم قلع جهی، لیلا امیدی، علی کریمی* صفحات 736-755
    مقدمه

    ایمنی در صنایع فرآیندی از اهمیت بالایی برخوردار است، زیرا این صنایع معمولا با مواد شیمیایی خطرناک و فرآیندهای پیچیده سروکار دارند که در صورت بروز حوادث می توانند پیامدهای جبران ناپذیری به همراه داشته باشند. یکی از نگرانی های عمده در این صنایع، اثرات دومینو است که به انتقال و تشدید حوادث از یک بخش به بخش دیگر اشاره دارد. این پدیده می تواند منجر به وقوع حوادث زنجیره ای و افزایش شدت آسیب ها شود. به همین دلیل، کاربرد و قوت مدل های تحلیلی در ارزیابی این اثرات اهمیت ویژه ای دارد. در این راستا، هدف مطالعه حاضر، ارزیابی اثرات دومینو و تحلیل آسیب پذیری مخازن ذخیره فرآورده های نفتی با استفاده از تئوری گراف و شبکه بیزین در یک صنعت فرآیندی است. این رویکرد به شناسایی نقاط ضعف سیستم کمک کرده و امکان پیش بینی حوادث بالقوه را فراهم می آورد که در نهایت می تواند به بهبود تدابیر ایمنی و کاهش خطرات مرتبط منجر شود.

    روش کار

    در این پژوهش، پس از جمع آوری اطلاعات اولیه مرتبط با جایگاه مخازن ذخیره و تعیین سناریوی حادثه، مخازن مورد مطالعه با توجه به نوع مواد ذخیره شده و جانمایی آن ها، با نظر کارشناسان انتخاب شدند. این مخازن به صورت گره های گراف مدل سازی شده و احتمال گسترش حادثه میان آن ها به شکل کمان های گراف نمایش داده شد. برای مدل سازی پیامد حوادث و محاسبه میزان تشعشع حرارتی ناشی از وقوع حریق در هر مخزن به مخازن مجاور، از نرم افزار مدلسازی ALOHA استفاده شد. همچنین، برای مدل سازی اثرات دومینو و تحلیل آسیب پذیری، از تئوری گراف و شبکه بیزین بهره گیری شد و محاسبه شاخص های تئوری گراف با استفاده از نرم افزار آماری R و بسته igraph انجام گرفت.  

    یافته ها

    اثرات دومینو در مخازن با توجه به مخازن هدف مربوط به سناریوی حریق استخری مشخص گردیدند و به صورت گراف جهت دار مدل سازی شدند. مخزن شماره 4 تاثیرگذارترین و تاثیرپذیرترین مخزن در گسترش و راه اندازی اثرات دومینو با بالاترین شاخص بینیت (2381/0)، شاخص نزدیکی خارجی(35211/0) و شاخص نزدیکی داخلی (3663/0) تعیین شد. همچنین بر اساس شاخص نزدیکی کل، محتمل ترین توالی درگیر شدن مخازن در حریق های ناشی از اثرات دومینو مشخص گردید.

    نتیجه گیری

    مدل سازی اثرات دومینو با استفاده از شبکه های بیزین و تئوری گراف به منظور کاهش احتمال تشدید این اثرات پیشنهاد می شود و نتایج آن می تواند برای استراتژی های بهینه اطفای حریق نیز مورد استفاده قرار گیرد. همچنین، تحلیل آسیب پذیری با استفاده از تئوری گراف و تعیین مخازن از نظر پتانسیل راه اندازی و گسترش حریق، می تواند در زمینه مدیریت ریسک اثرات دومینو مفید باشد.

    کلیدواژگان: اثرات دومینو، آسیب پذیری، حریق، تئوری گراف، مخازن ذخیره سازی
  • داوود افشاری، نیلوفر چینی ساز، مریم سید طبیب، ایمان دیانت، مریم نوراللهی درآباد* صفحات 756-771
    مقدمه

    یکی از مهم ترین فاکتورهای موثر بر میزان قدرت چنگش و تلاش درک شده، ریسک فاکتورهای بیومکانیکی شامل زاویه مچ و آرنج و وضعیت ایستاده و نشسته می باشند. اثرات متقابل این فاکتورها می تواند اثرات متفاوتی را بر میزان قدرت چنگش و تلاش درک شده داشته باشد. لذا مطالعه حاضر با هدف بررسی و تعیین اثر متقابل زوایای مختلف مچ دست و آرنج  در دو وضعیت نشسته و ایستاده بر قدرت چنگش و تلاش ذهنی درک شده، انجام شد. 

    روش کار

    در مطالعه حاضر 30 دانشجو (30-19 سال) شرکت کردند. قدرت چنگش بوسیله دینامومتر برای 12 حالت مختلف با توجه به زاویه مچ دست و آرنج در دو وضعیت ایستاده و نشسته اندازه گیری شد. تلاش ذهنی درک شده نیز با استفاده از CR-10 بورگ برای هر یک از شرایط ارزیابی شد. تجزیه و تحلیل داده ها با نرم افزار SPSS 23 انجام شد. برای مقایسه تلاش ذهنی درک شده در پوسچر ایستاده و نشسته از آزمون ویلکاکسون استفاده شد. آنالیز تکراری سه طرفه برای بررسی سه عامل وضعیت ایستاده/نشسته، زاویه آرنج و زاویه مچ دست انجام شد. همچنین از آنالیز اندازه های تکراری سه طرفه با سه عامل وضعیت، بازو و مچ دست و آزمون کرویت ماچولی استفاده شد. برای بررسی اندازه اثر نیز (partial η2) محاسبه شد.  

    یافته ها

    برای دو وضعیت نشسته و ایستاده، بیشترین قدرت چنگش در زاویه 0 مچ و زاویه 90 آرنج (ایستاده: 8/10 ± 6/28، نشسته: 8/9± 8/25) و کمترین قدرت چنگش در اکستنشن کامل مچ  و زاویه 0 آرنج (ایستاده:5/6 ± 3/19 ،  نشسته: 9/6 ± 9/17) اندازه گیری شد. در هر سه زاویه ی طراحی شده برای آرنج (0، 60 و 90)، بیشترین میزان تلاش درک شده در زاویه ی اکستنشن کامل مچ دست بود. تغییرات میزان قدرت چنگش در زوایای مورد بررسی برای دو وضعیت نشسته و ایستاده روند یکسانی داشت و قدرت چنگش دست، در وضعیت ایستاده بیشتر از نشسته بود (001/0> P-value).  اثر هر یک از فاکتورهای مورد بررسی (وضعیت نشسته و ایستاده، زاویه مچ دست و زاویه آرنج) به تنهایی بر قدرت چنگش دست و تلاش درک شده معنی دار بود (001/0> P-value). برای اثرات متقابل دوتایی، اثر متقابل زاویه آرنج و مچ دست بر روی قدرت چنگش (09/0= partial η2 ، 015/0= P-value) و همچنین تا حدودی بر تلاش درک شده معنی دار بود (08/0=partial η2 ، 06/0= P-value). از میان فاکتورهای مورد بررسی زاویه مچ دست نقش برجسته تری در تلاش ذهنی درک شده داشت (31/0=partial η2 ، 001/0> P-value).

    نتیجه گیری

    یافته های این مطالعه می توانند در  تعیین اثر فاکتورهای بیومکانیکی موثر بر طراحی ابزارهای دستی  و ایستگاه های کاری کمک کنند.

    کلیدواژگان: قدرت چنگش، تلاش درک شده، پوسچر، زاویه مچ، زاویه آرنج
  • محمدجواد شیخ مظفری، زهرا هاشمی*، علی محسنیان صفحات 772-795
    مقدمه

    جاذب های میکروسوراخدار (MPP) به عنوان جاذب های نسل بعد دارای مزایای زیادی هستند. اما بزرگترین عیب آن ها نسبت به جاذب های دیگر پهنای باند اندک آن ها می باشد. هدف از این مطالعه بررسی چگونگی افزایش پهنای باند یک MPP در بازه فرکانسی 1 تا 1500 هرتز از طریق شبیه سازی با استفاده از روش المان محدود (FEM) در نرم افزار کامسول می باشد.

    روش کار

    برای انجام مدلسازی از FEM در نرم افزار کامسول نسخه 5.3a استفاده گردید. به منظور افزایش پهنای باند از تکنیک های پیکربندی سری-موازی، عمق های هوایی متقارن و نامتقارن و بکاربردن دو ماده جاذب متخلخل در لایه های هوا به صورت متقارن و نامتقارن استفاده گردید. در مرحله اول ابتدا بهترین پیکربندی انتخاب و سپس برای مراحل بعدی ثابت در نظر گرفته شد.  

    یافته ها

    بهترین حالت چیدمان پیکربندی حالتی است که دو MPP بالاتر نسبت به دو MPP پایین تر، دارای سوراخ های بزرگتر و درصد تخلخل کمتری باشد. همچنین مشخص گردید در صورتی که اختلاف عمق لایه های هوا دو MPP بالا و پایین از هم بیشترین باشد، پهنای باند افزایش بیشتری پیدا می کند تا زمانی که بهم نزدیک تر باشند. همچنین با استفاده از مواد متخلخل الیافی در یکی از لایه ها پیک رزونانس کاهش اما پهنای باند افزایش پیدا کرد.

    نتیجه گیری

    جاذب های MPP به دلیل ساختار هلم هولتزی و ساختار پارامتریک خود دارای رفتارهای متفاوتی هستند و در صورتی که پارامترهای تشکیل دهنده آن ها متناسب با خصوصیات آکوستیکی صدای مد نظر طراحی شود بالاترین راندمان را خواهند داشت. همچنین استفاده از روش های عددی مثل FEM جایگزین مناسبی برای روش های هزینه بر آزمایشگاهی باشد.

    کلیدواژگان: جاذب میکروسوراخدار، روش عددی المان محدود، افزایش پهنای باند
  • فاطمه السادات میرنجفی زاده، مجتبی خسروی دانش، علی نحوی، عباس رحیمی فروشانی، محمدجواد شیخ مظفری، عادل مظلومی* صفحات 796-821
    مقدمه

    حواس پرتی راننده مشکلی مهم در بخش حمل و نقل عمومی به خصوص اتوبوس های درون شهری به شمار می آید؛ زیرا حوادث احتمالی آن می تواند منجر به خسارات مالی و جانی جبران ناپذیری گردد. با توجه به اهمیت موضوع، مطالعه حاضر با رویکرد کیفی و با هدف بررسی عوامل موثر بر حواس پرتی در بین رانندگان اتوبوس های درون شهری و دسته بندی این عوامل با رویکرد سیستم فنی اجتماعی بر اساس نظریه تعادل انجام شد. 

    روش کار

    در این مطالعه که در سال 1403 در شهر تهران انجام شد، 18 راننده اتوبوس به روش خوشه بندی انتخاب شدند که شامل 10 راننده BRT و 8 راننده غیر BRT بود. داده ها از طریق مصاحبه های نیمه ساختاریافته با رانندگان و همچنین مشاهدات مستقیم جمع آوری شد. تجزیه و تحلیل داده های جمع آوری شده با استفاده از رویکرد تحلیل محتوای کیفی هدایت شده مبتنی بر مدل نظریه تعادل انجام شد. در انتها، اعتبار یافته ها توسط مثلث سازی جمع آوری داده ها، کنترل اعضا (رانندگان) و مرور همتا بررسی شد.  

    یافته ها

    یافته ها نشان داد که منابع ایجاد کننده حواس پرتی مربوط به شش سطح از سیستم کاری است که مهم ترین آن ها عوامل مرتبط با محیط، وظیفه و سازمان شناسایی شدند. براساس یافته های مطالعه، فرهنگ نادرست و تخطی سایر استفاده کنندگان از خیابان در سطح عوامل محیطی و تعامل راننده با مسافران در سطح عوامل مربوط به وظیفه عوامل کلیدی موثر بر حواس پرتی شناسایی شدند. همچنین، عوامل سازمانی نظیر تعامل با سرپرست و همکاران و مسائل مربوط به حقوق از دیگر عوامل مهم تاثیرگذار بودند. بر خلاف بسیاری از مطالعات که استفاده از تلفن همراه در حین رانندگی را به عنوان عامل اصلی حواس پرتی معرفی کرده اند، در این تحقیق به این عامل به طور محدود اشاره شد.

    نتیجه گیری

    این مطالعه به شناسایی عوامل گوناگون در سطوح مختلف سیستم کاری که بر حواس پرتی رانندگان اتوبوس های درون شهری تاثیر می گذارد، پرداخت. براساس نتایج این مطالعه، مهم ترین اجزای تاثیرگذار سیستم کاری، محیط، وظایف و سازمان شناسایی شدند. تعامل رانندگان با سایر کاربران خیابان و مسافران، ارتباط با سرپرستان و همکاران و مسائل حقوقی تاثیرات قابل توجهی بر حواس پرتی رانندگان داشتند. رفع این مشکلات با ارائه آموزش های مناسب به مسافران و کاربران خیابان و همچنین اجرای استراتژی های مدیریتی در سازمان به منظور بهبود روابط درون سازمانی و حل مسائل مربوط به حقوق امکان پذیر است.

    کلیدواژگان: حواس پرتی راننده، رانندگان اتوبوس های درون شهری، سیستم فنی اجتماعی، تحقیق کیفی
  • اکرم تبریزی، مصطفی جعفری زاوه، حمید شیرخانلو، فریده گلبابایی* صفحات 822-840
    مقدمه

    ترکیبات آلی فرار (VOCs) آلاینده های خطرناک و سمی موجود در هوا هستند و از منابع مختلف صنعتی منتشر می شوند. با توجه به اثرات نامطلوب زایلن بر سلامتی، حذف موثر VOCs از هوا توسط نانوجاذب ها مهم است. در این مطالعه به منظور بررسی کارایی حذف زایلن از نانو گرافن (NG) و نانو گرافن اکسید (NGO) به عنوان جاذب استفاده شد.

    روش کار

    در این مطالعه به منظور بررسی راندمان جذب نانوگرافن و نانو گرافن اکسید پس از سنتز نانو جاذب ها، در یک سیستم دینامیکی، بخار زایلن در یک محفظه در هوای خالص تولید و در کیسه نمونه برداری تدلار ذخیره و سپس به جاذب منتقل شد. سپس تاثیر پارامترهای مختلف مانند غلظت زایلن، سرعت جریان هوای ورودی و مقادیر جرم جاذب در رطوبت 32 درصد و دمای 25 درجه سانتی گراد بر میزان جذب و نحوه عملکرد جاذب های مورد نظر بررسی شد. در نهایت، آشکارساز یون شعله کروماتوگرافی گازی (GC-FID) غلظت زایلن در هوا را پس از فرآیند جذب-واجذب تعیین کرد.  

    یافته ها

    میانگین راندمان جذب برای NG و NGO به ترتیب 8/96% و 5/17% به دست آمد. خصوصیات جاذب NG و NGO نشان داد که محدوده اندازه ذرات کمتر از 100 نانومتر است.

    نتیجه گیری

    نتایج نشان داد که کارایی جذب NG برای حذف زایلن از هوا بیشتر از NGO است.

    کلیدواژگان: ترکیبات آلی فرار، زایلن، نانوگرافن، نانو گرافن اکسید، جذب سطحی
  • وحید کاظمی زاده، امیرعباس منظمی*، فخرالدین صبا، اندرو جی مک اینچ صفحات 841-856
    مقدمه

    هدف از پژوهش حاضر بررسی اثر مداخله تمرینات استقامتی (هوازی) بر سطوح نشانگرهای التهابی (IL-6/ TNF-α) و برخی پارامترهای متابولیکی در رت‏های نر مبتلا به کبد چرب غیرالکلی ناشی از رژیم غذایی پرچرب، به منظور بررسی امکان سنجی استفاده از تمرین ورزشی برای کاهش التهاب بود.

    روش کار

    در این راستا، تعداد 44 سر رت نژاد ویستار به‏ صورت تصادفی در دو گروه (I) رژیم غذایی استاندارد به تعداد 22 سر رت و همچنین (II) تعداد 22 سر رت در گروه رژیم غذایی پرچرب به همراه فروکتوزمایع (HFD+HF) با دسترسی آزاد قرار گرفتند. پس از 17 هفته، دو رت در هر گروه قربانی شدند و بافت کبد برای مشاهده رنگ آمیزی هماتوکسیلین-ائوزین گرفته شد. سپس، تعداد 20 سر رت باقی‏مانده در گروه (I) به گروه کنترل (C)، گروه تمرین (T) و 20 سر رت گروه (II) به گروه کبد چرب (FL) و گروه کبد چرب+ تمرین (FL+T)، (هر گروه شامل 10 سر رت) تقسیم شدند. در مرحله بعد گروه‏ های T، مداخله تمرین استقامتی هشت هفته‏ ای را تکمیل کردند. سپس، سطوح IL-6، TNF-α، گلوکز، انسولین، مقاومت و حساسیت به انسولین اندازه‏ گیری شد.   

    یافته ها

    نتایج پژوهش حاضر نشان داد که در اثر یک رژیم غذایی پرچرب به همراه فروکتوز مایع در رت‏های گروه HFD+HF،  بیماری کبد چرب غیرالکلی (NAFLD) با عوارضی مانند: افزایش معنی‏ داری در سطوح IL-6 و TNF-α، اختلال عملکرد کبدی و اختلال پارامترهای متابولیک، ایجاد می ‏شود  (001/0> p). همچنین، تمرینات استقامتی با معکوس کردن روند بیماری اکثر این عوارض را بهبود ‏می‏بخشد (001/0> p).

    نتیجه گیری

    با توجه به نتایج پژوهش حاضر می‏توان نتیجه‏ گیری کرد که بهبود نشانگرهای التهابی، اختلال عملکرد کبدی و اختلال پارامترهای متابولیک از طریق انجام تمرینات استقامتی یکی از مکانیسم های کلیدی ورزش در درمان بیماری کبد چرب غیرالکلی است، این امر می‏تواند اهمیت تمرینات استقامتی را در درمان بیماری کبد چرب غیرالکلی نشان دهد.

    کلیدواژگان: بیماری کبد چرب غیرالکلی، سندرم متابولیک، تمرین هوازی، نشانگرهای التهابی، IL-6، TNF-Α، مقاومت و حساسیت به انسولین
  • زهره شرعی*، شاهین ابراهیمی صفحات 857-873
    مقدمه

    پیشرفت روز افزون تکنولوژی در زمینه دیجیتال و اتوماسیون منجر به تغییر در خط روند مشاغل و محتوای شغل گردیده و به نظر می رسد سازمان ها کارکنان خود را به سمت کارهای سخت تر و طولانی تر سوق می دهند که در سلامتی کارکنان تاثیر گذار است. این پژوهش با هدف بررسی تاثیر مطالبات - منابع شغلی بر اضافه کاری و سلامت مرتبط با کار و با واسطه گری اعتیاد به کار و عجین شدن با کار انجام شده است.

    روش کار

    کار از حیث هدف و ماهیت، توصیفی-پیمایشی و کاربردی است. جامعه آماری پژوهش را کارکنان شرکت مترو اصفهان (320 نفر) تشکیل می دهند که تعداد (175 نفر) از آن ها به روش نمونه گیری تصادفی موردمطالعه قرار گرفتند. برای جمع آوری اطلاعات موردنیاز، پرسشنامه اعتیاد به کار Spence و Robbins (1992)، عجین شدن با کار Lodahl و Kejner، سلامت ادراک شده مرتبط با کار Langseth-Eide (2019) و محتوای شغلی Karasek و همکاران (1998) بر اساس طیف لیکرت توزیع و تکمیل گردید. مدل معادلات ساختاری جهت بررسی آزمون فرضیه های پیشنهادشده به کار گرفته شد.  

    یافته ها

    یافته ها نشان داد مطالبات شغلی بر اعتیاد به کار (394/0 = β, 969/5= T،  05/0> P) و منابع شغلی بر عجین شدن با کار(502/0 = β, 832/7= T،  05/0> P) تاثیر مثبت و معناداری دارد و اعتیاد به کار و عجین شدن با کار تاثیر مطالبات و منابع شغلی بر اضافه کاری و سلامت ادراک شده مرتبط با کار را میانجیگری می کنند(383/4 = β, 189/2= T،  05/0> P). همچنین منابع شغلی تاثیر مطالبات شغلی بر اعتیاد به کار را تعدیل نمی کند (049/0- = β, 333/1= T،  05/0> P) .

    نتیجه گیری

    نتایج این پژوهش نشان داد که بین اعتیاد به کار و عجین شدن با کار به عنوان دو نوع مختلف سخت کوشی (منفی و مثبت) در روند سلامت در مدل مطالبات-منابع شغلی تمایز وجود دارد.

    کلیدواژگان: مطالبات شغلی، منابع شغلی، اعتیاد به کار، عجین شدن با کار، سلامتی مرتبط با کار
  • مرضیه محمدی، زینب کاظمی، مرضیه ایزدی لای بیدی، محمدصادق قاسمی* صفحات 874-888
    مقدمه

    کارکنان اتاق عمل درگیر فعالیت های فیزیکی شغلی مانند وضعیت بدنی نامناسب، در دست گرفتن ابزار جراحی و ایستادن طولانی مدت می باشند که می تواند منجر به اختلالات اسکلتی-عضلانی شود. کمردرد شایع ترین و پرهزینه ترین مشکل در بین اختلالات اسکلتی-عضلانی در این افراد می باشد. هدف از این پژوهش تعیین رابطه بین فعالیت فیزیکی شغلی با کمردرد و ناتوانی کارکنان اتاق عمل بود.

    روش کار

    در این مطالعه 60 نفر از پرسنل اتاق عمل به صورت داوطلبانه با حداقل دو سال سابقه کار شرکت کردند. در پایان یک هفته کاری، به منظور تعیین میزان ناتوانی و درد از پرسشنامه میزان درد مزمن (GCP) و به منظور تعیین سطح فعالیت فیزیکی شغلی از پرسشنامه بین المللی فعالیت فیزیکی (IPAQ) استفاده شد. برای بررسی رابطه بین فعالیت بدنی با کمردرد و ناتوانی از رگرسیون خطی ساده استفاده شد.  

    یافته ها

    طبق پرسشنامهGCP، کمر درد شغلی دربین 3/58% افراد گزارش شد و 7/41% سالم بودند. از میان افراد دارای کمردرد، شدت درد (22/18) 11/43 ثبت شد. ثبات درد به طور میانگین برابر با (95/0) 3/2 روز بود و میزان ناتوانی حاصل از درد (44/27) 09/32 به دست آمد. با استفاده از رگرسیون خطی ساده برای متغیرهای فعالیت شدید (02/0 =P-value)، زمان نشستن (01/0 =P-value) و درد مزمن (001/0 >P-value) فرض معناداری تایید شد.

    نتیجه گیری

    فعالیت فیزیکی شغلی با شدت کم و با تکرار بالا و ایستادن طولانی مدت در یک وضعیت ثابت از شاخص ترین عوامل ایجاد کننده کمردرد در ناحیه کمر کارکنان اتاق عمل گزارش شد. درد مزمن در این افراد درجه دو گزارش شد که درد شدید و ناتوانی کم می باشد و در صورت عدم پیگیری به محدودیت حرکتی منجر می شود. بنابراین، مداخلات ارگونومی موثر جهت جلوگیری از آسیب های ناحیه کمر در افراد در معرض ناتوانی و درد کمر در محیط های کاری پیشنهاد می شود.

    کلیدواژگان: اختلالات اسکلتی-عضلانی، کمردرد، فعالیت فیزیکی، فعالیت فیزیکی شغلی، کارکنان اتاق عمل
  • سقراط عمری شکفتیک، جمال بیگانه، مائده حسین زاده، حمیدرضا جعفری ندوشن، ندا مهرپرور* صفحات 889-915
    مقدمه

    محیط های کاری اغلب دارای خطرات بالقوه ای همچون مواجهه با مواد شیمیایی سمی هستند. انجام یک ارزیابی ریسک بهداشتی به کارفرمایان در راستای شناسایی خطرات موجود ناشی از این مواد و اجرای کنترل های لازم کمک می کند. لذا هدف از انجام این مطالعه بحث، بررسی و معرفی روش های ارزیابی ریسک بهداشتی مواد شیمیایی است.

    روش کار

    پژوهش حاضر یک مرور روایتی است. بمنظور کسب اطلاعات لازم، جستجوی متون فارسی و انگلیسی در پایگاه های داده Web of Science، PubMed، Scopus، SID و Magiran انجام شد. در این جستجو از کلمات کلیدی مانند «health risk assessment»، «chemicals» و «nanomaterials» استفاده شده است.  

    یافته ها

    ارزیابی ریسک بهداشتی کمی و کیفی نقش مهمی در سلامت شغلی دارد، بطوریکه هر روش سطوح مختلفی از عمق و دقت را ارائه می دهد. مدل آژانس حفاظت از محیط زیست (EPA)، مدل مالزی، شبیه سازی مونت کارلو، مدل سازی فارماکوکینتیک مبتنی بر فیزیولوژی (PBPK)، مدل های رابطه کمی ساختار-فعالیت (QSAR)، ارزیابی خطر احتمالی (PRA)، ارزیابی تاثیر چرخه زندگی (LCIA)  و مدل دوز-پاسخ مبتنی بر بیولوژی (BBDR) از جمله مهم ترین روش های کمی، مدل COSHH، مدل ICCT، مدل ICMM، مدل استرالیا و مدل رومانی از مهم ترین روش های کیفی و مدل سنگاپور، روش LEC و مدل SEP نیز روش های نیمه کمی برای ارزیابی ریسک بهداشتی مواد شیمیایی هستند. عدم قطعیت های اساسی در داده های سم شناختی، دسترسی محدود به داده ها و رفتارهای منحصربه فرد و پیچیده نانومواد در محیط های کاری سبب ارجحیت روش های کیفی نسبت به روش های کمی در ارزیابی ریسک فعالیت های مربوط به نانومواد شده است.

    نتیجه گیری

    بطور کلی، تکامل روش های ارزیابی ریسک بهداشتی نشان دهنده یک حرکت پیوسته در جهت افزایش دقت، صحت، قابلیت اطمینان و ارتباط بیشتر آنها است. همگام با شکوفایی و گسترش دانش ما، ارزیابی ریسک بهداشتی نیز برای رسیدگی به چشم انداز پیچیده و در حال تحول خطرات شیمیایی و تضمین حفاظت از سلامت انسان و محیط زیست، بخوبی در حال تحول است.

    کلیدواژگان: ارزیابی ریسک بهداشتی، مواد شیمیایی، نانومواد، Control Banding، مواد بالک
  • تارا روحانی، نرمین حسن زاده رنگی*، یحیی خسروی صفحات 916-935
    مقدمه

    علم سنجی به عنوان حوزه ای از پژوهش، به بررسی و تحلیل روندها و الگوهای علمی در مجلات علمی مختلف می پردازد. هدف از این مطالعه، تحلیل محتوای مقالات منتشر شده در ده سال اخیر در مجلات معتبر علمی پژوهشی به زبان فارسی در زمینه ارگونومی و تعیین الگوی توزیع مقالات بر حسب موضوع های استخراج شده است.

    روش کار

    کلیه مطالعات منتشر شده در یک دهه اخیر (1390 الی 1400) در مجلات علمی پژوهشی فارسی «فصلنامه بهداشت و ایمنی کار»، «ارگونومی»،  «سلامت کار»، «مهندسی بهداشت حرفه ای»، «طب کار» و «بهداشت کار و ارتقا سلامت» به روش سرشماری از وبگاه مجلات استخراج شدند. تعداد 527 مقاله منتشر شده بر حسب کدهای موضوعی استخراج شده از مجلات بین المللی دسته بندی شدند. نرم افزار Excel  جهت آماده سازی و تحلیل داده ها استفاده شد.   

    یافته ها

    موضوع «وضعیت فیزیوسایکولوژی و فاکتورهای شغلی» دارای بیشترین درصد فراوانی (65/17 درصد) و موضوع «ارگونومی در کارگاه های کوچک» دارای کمترین درصد فراوانی (صفر درصد) است. موضوع های «وضعیت فیزیوسایکولوژی و فاکتورهای شغلی»، «متدولوژی ارگونومی، روش ها و تکنیک ها»، «بازرسی، نظارت و ارزیابی عملکرد» و «ویژگی های فیزیولوژی، فرایندهای شناختی» حدود 55 درصد مقالات منتشر شده را تبیین می کند. موضوع «طراحی محل کار و تجهیزات» در سال های اخیر بیش ازپیش سیر صعودی داشته اند. سیمای تحقیقات ارگونومی کشور بیشتر بر رویکرد روش شناسی و نوآوری تا کاربردی، نیازهای صنایع تا خدمات و کشاورزی، کارکرد کارگاه های بزرگ تا کارگاه های کوچک و ساختمانی، و نگرش میکرو ارگونومی تا ماکرو ارگونومی متمرکز است.  

    نتیجه گیری

    جهت گیری موجود در راستای توسعه روش‎ها و تکنیک‎های علم ارگونومی و نهادینه کردن این علم در بسترهای مختلف اجتماعی به عنوان مداخله ای پیشگیرانه در جهت ارتقای سطح سلامت و افزایش بهره وری تاکید می کند. انتظار می رود روند توسعه تحقیقات حوزه ارگونومی کشور با سیاست گذاری های جدید در حوزه های مختلف ضمن بهره گیری از پیشرفت های علمی بین المللی بر کارکردها و چالش های خاص کشور و با رویکرد مسئله محور بهبود یابد.

    کلیدواژگان: ارگونومی، مقاله مجله، علم سنجی
|
  • Seyyed Mohammadjavad Golhosseini, Mohsen Aliabadi*, Rostam Golmohammadi, Maryam Farhadian, Mehdi Akbari Pages 692-715
    Introduction

    Despite the numerous studies on occupational noise-induced hearing loss, there is limited documentation on the vibration effects on the workers’ auditory system. Heavy equipment drivers are exposed to high levels of whole-body vibration (WBV) and noise. Therefore, this study aims to investigate the heavy equipment drivers’ auditory response to WBV exposure and combined exposure to noise and WBV.

    Material and Methods

    30 male heavy equipment drivers with an average age of 32.40 ± 4.91 years participated in this study, which was designed based on the repeated measurements model. During 3 defined scenarios of exposure to WBV, combined exposure to noise and WBV, as well as the scenario without exposure, the drivers’ auditory response was measured using distortion product otoacoustic emissions (DPOAE). Statistical analyses were performed by IBM SPSS-25 software.

    Results

    The range of heavy equipment in-cabin noise was 84-89 dB. Also, the most exposure of drivers to WBV was obtained in the Z axis with an average acceleration of 1.29 m/s2. The DPOAE amplitude of the drivers in all three investigated scenarios showed significant changes (P<0.05); But in comparison between different scenarios, exposure to WBV and combined exposure to noise and WBV had a significant effect on the response of the auditory system of the participants in the study compared to the scenario without exposure (P<0.05). Also, there was a significant difference in the changes of the DPOAE amplitude in different frequencies; Thus, the most changes in the DPOAE amplitude were observed in the frequencies of around 4000 Hz.

    Conclusion

    The results of this study showed the damaging consequences of exposure to noise and WBV on the auditory response; In addition, the present study provided evidence of synergistic effects of combined exposure to noise and WBV on heavy equipment drivers.

    Keywords: Whole-Body Vibration (WBV), Noise, Heavy Equipment Drivers, DPOAE
  • Farzad Khalili, Afshin Marzban*, Mahmoud Ghaseminejad, Abdollah Hayati Pages 716-735
    Introduction

    Sugarcane is an important and strategic product in many countries, including Iran. While the introduction of mechanization, e.g., sugarcane harvesting machines, has significantly enhanced the production process, operators of these machines still face many ergonomic and safety challenges. 

    Material and Methods

    The present study investigated the ergonomic status of sugarcane harvester operators by examining some of their physiological and physical evaluations. Physiological evaluations included heart rate, oral temperature, and energy consumption of the operators, perceptual strain index, and physiological strain index. Physical evaluation included estimating the amount of pain and discomfort in body segments. The correlation between pain and discomfort of body parts with some demographic and physiological indices of users was investigated using IBM SPSS 24 software.

    Results

    Sugarcane harvester operators’ heart rate, energy consumption, and physiological strain index were 79.05 beats/min, 18.81 kJ/min, and 0.83, respectively. The average of three indices of thermal sensation, perceived exertion of activity, and perceptual strain index were estimated as 4.40, 9.21, and 8.86, respectively.

    Conclusion

    Pain and discomfort in the neck and back segments, like many agricultural activities, had the highest rate among the body parts. Also, shorter and thinner operators reported higher pain and discomfort in some segments of the body.

    Keywords: Body Pain, Discomfort, Physiological Indices, Agricultural Mechanization, Present Status Evaluation
  • Maryam Ghaljahi, Leila Omidi, Ali Karimi* Pages 736-755
    Introduction

    Safety in process industries is of paramount importance, as these industries typically deal with hazardous chemicals and complex processes that can lead to irreparable consequences in the event of accidents. The present study aims to evaluate domino effects and analyze the vulnerability of storage tanks using graph theory and Bayesian networks in a process industry. This approach can help identify system vulnerabilities and facilitate the prediction of potential accidents, ultimately leading to improved safety measures.

    Material and Methods

    In this study, after collecting initial information related to the location of storage tanks and determining accident scenarios, the tanks under investigation were selected based on the type of stored materials and their layout, with input from experts. These tanks were modeled as nodes in a graph, and the probability of accident spreading among them was represented as edges in the graph based on the amount of heat radiation. Additionally, for modeling domino effects and analyzing vulnerability, graph theory and Bayesian networks were employed.

    Results

    Based on the target tanks related to the pool fire scenario, domino effects in the tanks were identified and modeled as a theory graph. Tank number 4 was determined to be the most influential and susceptible tank in the spread and initiation of domino effects, with the highest betweenness index (0.2381), outcloseness index (0.35211), and incloseness index (0.3663). Additionally, based on the allcloseness index, the most likely sequence of the tank involvement in fires caused by domino effects was identified.

    Conclusion

    In order to reduce the likelihood of exacerbating domino effects, modeling the effects using Bayesian networks and graph theory is proposed; the results can also be applied to optimize fire suppression strategies. Additionally, vulnerability analysis through graph theory and the assessment of tanks regarding their potential for fire initiation and spread can be beneficial in managing the risks associated with domino effects.

    Keywords: Domino Effects, Vulnerability, Fire, Graph Theory, Storage Tanks
  • Davood Afshari, Niloofar Chinisaz, Maryam Seyedtabib, Iman Dianat, Maryam Nourollahi-Darabad* Pages 756-771
    Introduction

    Biomechanical risk factors, including wrist and elbow angle and standing and sitting position, are the primary factors affecting hand grip strength and perceived exertion. The interaction of these factors can include different effects on grip strength and perceived exertion. Therefore, the present study examines the interaction of varying wrist and elbow angles in sitting and standing postures on the variability of grip strength and perceived exertion.

    Material and Methods

    In the present study, 30 students (15 females, 15 males) aged 19-30 participated. The average grip strength was measured by a dynamometer for 12 different positions based on the angle of the wrist and elbow in both standing and sitting postures. Perceived exertion was also assessed using the Borg CR-10 scale for each setting. Data analysis was performed using SPSS 23. The Wilcoxon test was applied to compare perceived exertion between standing and sitting postures. Furthermore, a three-way ANOVA was performed to examine interactions between posture (standing/sitting), elbow, and wrist angles. Mauchly’s Sphericity Test was applied to confirm the ANOVA assumptions, and effect sizes for multivariate analysis were calculated (partial η2).

    Results

    In both sitting and standing postures, the highest average grip strength was observed at a 0-degree wrist angle with a 90-degree elbow angle (standing: 28.6 ± 10.8, sitting 25.8 ± 9.8), while the lowest average grip strength was recorded at full wrist extension with a 0-degree elbow angle (standing: 19.3 ± 6.5, sitting 17.9 ± 6.9). In all three elbow angles examined (0°, 60°, and 90°), the highest value of perceived exertion was recorded in the full extension of the wrist. The changes in the grip strength at different angles were the same for sitting and standing postures, yet the hand grip strength was higher in the standing than the sitting posture (P-value<0.001). The effect of each of the studied factors (sitting and standing postures, wrist angle, and elbow angle) alone on hand grip strength and perceived exertion was deemed to be significant (P-value<0.001). Regarding the two-way interactions of the research variables, the interaction effect of elbow and wrist angles on grip strength (partial η2=0.09, P-value=0.015) and perceived exertion was significant (partial η2=0.08, P-value=0.06). Furthermore, findings indicated that the wrist angle had a more pronounced effect on the value of the perceived exertion (partial η2=0.31, P-value<0.001).

    Keywords: Grip Strength, Perceived Exertion, Posture, Wrist Angle, Elbow Angle
  • Mohammadjavad Sheikhmozafari, Zahra Hashemi*, Ali Mohsenian Pages 772-795
    Introduction

    Micro-perforated panel (MPP) absorbers are emerging as next-generation absorbers due to their considerable advantages. However, their main drawback compared to other absorbers is their limited bandwidth. This study aims to investigate methods for enhancing the bandwidth of an MPP in the frequency range of 1 to 1500 Hz through simulation using the Finite Element Analysis (FEA) in COMSOL software.

    Material and Methods

    The modeling was conducted using FEA in COMSOL version 5.3a. To increase the bandwidth, techniques such as series-parallel configurations, symmetrical and asymmetrical air gap depths, and the incorporation of two porous absorbing materials in symmetric and asymmetric air gap layers were employed. In the initial phase, the best configuration was selected and retained for the subsequent stages.

    Results

    The optimal arrangement involved two upper MPPs having larger holes and a lower perforation percentage compared to the two lower MPPs. It was also found that increasing the depth difference between the air layers of the upper and lower MPPs led to a greater increase in bandwidth than when they were closer together. Furthermore, the use of fibrous porous materials in one of the layers resulted in a reduction of resonance peak while enhancing the bandwidth.

    Conclusion

    MPP absorbers exhibit diverse behaviors due to their Helmholtz structure and parametric design. If their constituent parameters are tailored to match the acoustic characteristics of the target sound, they achieve optimal efficiency. Additionally, employing numerical methods such as FEA serves as a suitable alternative to more costly laboratory methods.

    Keywords: Micro-Perforated Panel, Finite Element Numerical Method, Bandwidth Increase
  • Fatemeh Sadat Mirnajafi Zadeh, Mojtaba Khosravi Danesh, Ali Nahvi, Abbas Rahimi Foroushani, Mohammadjavad Sheikhmozafari, Adel Mazloumi* Pages 796-821
    Introduction

    Despite advancements in road safety and vehicle design, road accidents remain prevalent, a quarter of which are caused by driver distraction. This issue is particularly critical in the public transport sector, especially among urban bus drivers, as distraction can lead to serious injuries and fatalities. Accordingly, this study explored the factors influencing distraction among urban bus drivers through a qualitative approach and a macroergonomics perspective.

    Material and Methods

    In this study conducted in 2024 in Tehran, 18 urban bus drivers were selected through cluster sampling. The participants included 10 drivers from bus rapid transit (BRT) system and 8 drivers from non-BRT services. Data were collected through semi-structured interviews with the drivers as well as on-site observations. Subsequently, a directed qualitative content analysis approach, based on the balance theory model, was used to analyze the collected data.

    Results

    The findings revealed that the primary sources of distraction belonged to six levels of the work system, the most cited of which were environment, tasks, and organization. Specifically, inappropriate behavior of other street users as an environmental factor and the driver’s interactions with passengers as task-related factors were identified as key sources. Additionally, organizational factors such as interactions with supervisors and colleagues, as well as salary issues, were significantly important. The participants very limitedly expressed using mobile phone while driving as a main distractor to their driving.

    Conclusion

    The current study identified various influential factors, spanning different levels of the work system, affecting bus drivers’ distraction, including generic factors that impact all urban drivers and specific factors that uniquely affect bus drivers. Addressing these factors through providing appropriate education for both passengers and street users along with implementing management strategies in the organization to enhance intra-organizational relationships and organizational support can lead to the safety of the bus drivers.

    Keywords: Driver Distraction, Urban Bus Drivers, Sociotechnical System, Qualitative Research
  • Akram Tabrizi, Mostafa Jafarizaveh, Hamid Shirkhanloo, Farideh Golbabaeie* Pages 822-840
    Introduction

    Volatile organic compounds (VOCs) are hazardous toxic pollutants in the air, which are released from various industrial sources. Due to the adverse effects of xylene on health, the effective removal of VOCs from the air by nano sorbents is crucial. In this study, nanographene (NG) and nanographene oxide (NGO) were used as adsorbents to investigate the efficiency of xylene removal.

    Material and Methods

    In this study, in order to investigate the absorption efficiency of nanographene and nanographene oxide after the synthesis of nano absorbents in a dynamic system, xylene vapor was produced in a chamber in pure air and stored in a Tedlar sampling bag and then transferred to the adsorbent. Subsequently, the effect of various parameters such as xylene concentration, inlet air flow rate, and absorbent mass values at 32% humidity and 25°C temperature on the absorption rate and performance of the desired absorbents was investigated. Finally, the gas chromatographic flame ion detector (GC-FID) determined the concentration of xylene in air after the adsorption-desorption process.

    Results

    The average adsorption efficiencies for NG and NGO were found to be 96.8% and 17.5%, respectively. The characteristics of the NG and NGO adsorbents indicated that the particle size range was less than 100 nanometers.

    Conclusion

    The results demonstrated that the adsorption efficiency of NG for the removal of xylene from the air is higher than that of NGO. The GC-MS method validated the proposed approach in real air samples.

    Keywords: Vocs, Xylene, Nano Graphene, Nano Graphene Oxide, Adsorption
  • Vahid Kazemizadeh, Amirabbas Monazzami*, Fakhredin Saba, Andrew J Mcainch Pages 841-856
    Introduction

    This study aimed to analyze the effects of endurance training (Aerobic) on the levels of inflammatory markers (IL-6/TNF-α) and some metabolic parameters in male rats with non-alcoholic fatty liver disease to investigate the feasibility of using exercise training to reduce inflammation.

    Material and Methods

    A total of 44 Wistar rats were randomly assigned into two groups: (I) standard diet group of 22 rats and (II) high-fat diet group with 22 rats supplemented with free access to fructose water. After 17 weeks, two rats from each group were sacrificed, and liver tissue was collected for hematoxylin-eosin staining. Subsequently, the remaining 20 rats in the (I) group were divided into a training group (T) and a control group (C). The 20 rats in the (II) group supplemented with fructose water were divided into a fatty liver group (FL) and a fatty liver + training group (FL+T), each comprising ten rats. In the next phase, the T-groups underwent an eight-week endurance training intervention. Then, IL-6, TNF-α, glucose, insulin, insulin resistance and sensitivity levels were measured.

    Results

    The results of the present study showed that as a result of a high-fat diet with liquid fructose in HFD+HF group rats, non-alcoholic fatty liver disease (NAFLD) with complications such as a significant increase in the levels of IL-6 and TNF-α, Hepatic dysfunction, and metabolic parameters were disturbed (p<0.001). However, endurance training improved most of these complications by reversing the disease process (p<0.001).

    Conclusion

    According to the results of the present study, it can be concluded that the improvement of inflammatory markers, liver dysfunction, and metabolic parameters through endurance training is one of the key mechanisms of exercise in the treatment of NAFLD, the consequences of which may show the importance of endurance training in treatment of NAFLD highlights.

    Keywords: Nonalcoholic Fatty Liver Disease, Metabolic Syndrome, Aerobic Exercise, Inflammatory Markers, IL-6, TNF-Α, Insulin Resistance, Sensitivity
  • Zohre Sharei*, Shahin Ebrahimi Pages 857-873
    Introduction

    The increasing advancement of technology in the field of digital technology and automation has led to a change in the line of work and job content, and it seems that organizations are pushing their employees towards harder and longer work, which affects the health of employees. This study investigated the impact of job demands and resources on overtime and work-related health through the mediation of workaholism and work engagement.

    Material and Methods

    The work is a descriptive survey in terms of purpose and nature. The study’s statistical population consisted of employees of Isfahan Metro Company (320 people), of which (175 people) were studied by Simple Random Sampling. To collect the required information, Spence and Robbin’s (1992) Addiction Questionnaire, Lodahl and Kejner’s (1965), Langseth-Eide’s (2019) Perceived Health-Related Questionnaire, and Bryson Bangers’ Caricature Content (1998) were distributed and supplemented based on a Likert scale. A Structural equation model (SEM) was used to test the hypotheses.

    Results

    The results showed that job demands on workaholism (β=0.394, T=5.969, P <0.05) and job resources had a positive and significant relationship with work engagement (β =0.502, T =7.832, p <0.05), and workaholism and work engagement on the relationship between job demands and resources over time and health. Mediating work-related perceptions (Z= 4.383, Z= 2.189, Z= 3.797). In addition, job resources did not moderate the relationship between job demands and workaholism (β= -0.049, T =1.333, p> 0.05). 

    Conclusion

    The results of this study showed that there is a distinction between workaholism and work engagement as two different types of hard work (i.e., negative and positive) in the health process in the JD-R model.

    Keywords: Job Demands, Job Resources, Workaholism, Work Engagement, Work-Related Health
  • Marzieh Mohammadi, Zeinab Kazemi, Marzieh Izadi Laybidi, Mohammadsadegh Ghasemi* Pages 874-888
    Introduction

    Operating room personnel are involved with occupational physical activities such as repetitive bending, holding surgical tools and standing for long hours that can lead to musculoskeletal disorders (MSDs). Low back pain (LBP) is the most prevalent and costly problem among these disorders. The aim of this study was to determine the relationship between occupational physical activity, LBP and disability among operating room personnel.

    Material and Methods

    A total of 60 operating room personnel voluntarily participated in the study, all of which had at least two years of working experience. At the end of a working week, the degree of disability and pain were assessed by Graded Chronic Pain (GCP) questionnaire. The International Physical Activity Questionnaire (IPAQ) was used to evaluate the level of physical activity. Simple linear regression was conducted to investigate the relationship between physical activity, LBP and disability. 

    Results

    The survey using the GCP questionnaire revealed that 58.3% of participants reported experiencing occupational back pain, while 41.7% reported no back pain.  Among those with back pain, the average pain intensity was rated 43.11 (18.22) on the scale.  Pain remained stable for an average of 2.3 days (standard deviation = 0.95).  The average level of disability associated with back pain was 32.09 (27.44). Statistical analysis using simple linear regression showed a significant relationship between back pain and several factors: vigorous physical activity (p-value = 0.02), prolonged sitting time (p-value = 0.01), and chronic pain (p-value < 0.001).

    Conclusion

    Occupational physical activity characterized by low intensity, but high repetition and standing for a long time in fixed postures were the most significant contributors to lumbar back pain among operating room personnel. Chronic pain in this population was reported as grade 2, indicating severe pain with minimal disability; if left unaddressed, this could lead to movement restrictions.

    Keywords: Musculoskeletal Disorders (Msds), Occupational Physical Activity, Low Back Pain, Disability, Operating Room Personnel
  • Soqrat Omari Shekaftik, Jamal Biganeh, Maedeh Hosseinzadeh, Hamidreza Jafari Nodoushan, Neda Mehrparvar* Pages 889-915
    Introduction

    Workplaces often contain potential risks, such as exposure to toxic chemicals. Conducting a thorough health risk assessment helps employers recognize these dangers and implement necessary controls. In the 20th century, modern risk assessment frameworks began to be established with the rise of public health agencies.

    Material and Methods

    The present study is a narrative review. In order to obtain necessary information, Persian and English texts were searched in Web of Science, PubMed, Scopus, SID and Magiran databases. Keywords such as “health risk assessment”, “chemicals” and “nanomaterials” were used in this study.

    Results

    Both quantitative and qualitative health risk assessments play critical roles in occupational health, with each method providing different levels of depth and accuracy depending on the situation. EPA Model, Monte-Carlo Simulation, Physiologically Based Pharmacokinetic (PBPK) Modeling, Quantitative Structure-Activity Relationship (QSAR) Models, Probabilistic Risk Assessment (PRA), Life Cycle Impact Assessment (LCIA), and Biologically Based Dose-Response (BBDR) Models, are among the most important quantitative methods for assessing the health risk of chemicals. COSHH Model, ICCT Model, ICMM Model, Australian Model, and Romanian Model, are the most important qualitative methods for health risk assessment of chemicals. In addition to the quantitative and qualitative methods, semi-quantitative methods like Singapore Model, LEC Method, and SEP Model, have also been proposed for assessing the health risk of chemicals. The preference for qualitative over quantitative methods in the risk assessment of activities involving nanomaterials stems from substantial uncertainties, limited data availability, and the unique and complex behaviors of nanomaterials in the workplaces.

    Conclusion

    Overall, the evolution of health risk assessment methods reflects a continuous drive towards greater accuracy, reliability, and relevance. As we continue to innovate and expand our knowledge, the field is well-positioned to address the complex and evolving landscape of chemical and material risks, ensuring the protection of human health and the environment.

    Keywords: Health Risk Assessment, Chemicals, Nanomaterials, Control Banding, Bulk
  • Tara Rouhani, Narmin Hassanzadeh-Rangi*, Yahya Khosravi Pages 916-935
    Introduction

    Scientometrics is a research field that examines and analyzes scientific trends and patterns in various scientific journals. This study aims to analyze the content of research published between 2011 and 2022 in Persian scientific journals focusing on ergonomics, to identify trends and the scientific direction in the field. 

    Material and Methods

    This study collected all articles published from 2011 to 2022 in Persian journals, including “Occupational Health,” “Occupational Health and Safety,” “Occupational Health Engineering,” “Iranian Journal of Ergonomics,” “Occupational Medicine,” and “Occupational Hygiene and Health Promotion,” using a census method from the journals’ websites. 368 articles were categorized based on thematic codes developed by experts, and data were analyzed using Excel 2010.

    Results

    The theme “Physiological Status and Occupational Factors” had the highest frequency (17.65%), while “Ergonomics in Small Workplaces and Services” had the lowest (0%). Approximately 55% of the published studies were centered around themes including “Physiological Status and Occupational Factors,” “Ergonomics Methodology, Methods and Techniques,” “Inspection, Monitoring, and Evaluation of Performance,” and “Characteristics of Physiology and Cognitive Processes.” The research focus in ergonomics tends to prioritize methodology and innovation over the practical application, emphasizing industrial needs over those in services and agriculture, and favoring large workplaces over small or construction sites.

    Conclusion

    The thematic framework and publication patterns can serve as valuable sources of information for educational and research planning within the field of ergonomics for universities, research centers, and related organizations; it can contribute to the scientific advancement of the field and lead to its overall improvement.

    Keywords: Ergonomics, Journal Article, Scientometrics