فهرست مطالب

یافته های نوین زمین شناسی کاربردی - پیاپی 12 (پاییز و زمستان 1391)

مجله یافته های نوین زمین شناسی کاربردی
پیاپی 12 (پاییز و زمستان 1391)

  • تاریخ انتشار: 1391/10/11
  • تعداد عناوین: 7
|
  • محمدحسین قبادی، رضا بابازاده، یاسین عبدی صفحه 1
    در این پژوهش، خاک های ریزدانه موجود در منطقه سد اکباتان در جنوب شرق همدان، با استفاده از آهک بهسازی شده است. آهک مورد استفاده، پودر آهک زنده عبوری از الک 40 بوده که با درصدهای وزنی 1%، 3%، 5% و 7% به خاک اضافه گردیده و تاثیر آن برروی خصوصیات ژئوتکنیکی خاک طی زمان های عمل آوری 7، 15، 30 و 45 روزه مطالعه شده است. تغییرات خصوصیات خمیری، مقاومت فشاری تک محوری، رطوبت بهینه و وزن واحد حجم خشک حداکثر ناشی از بهسازی خاک بررسی گردیده است. نتایج بیانگر آن است که خاک مورد مطالعه پس از گذشت 7 روز از افزودن آهک، خاصیت خمیری خود را از دست داده و به خاک غیر خمیری تبدیل شده است. همچنین تغییرات ایجاد شده در ترکیب کانی شناسی و فابریک خاک، باعث افزایش رطوبت بهینه، مقاومت فشاری تک محوری و کاهش حداکثر وزن واحد حجم خشک خاک شده و قابلیت کاربرد آن را در پروژه های مهندسی افزایش داده است. با در نظر گرفتن نتایج به دست آمده، زمان عمل آوری 45 روزه با 7 درصد وزنی آهک، به عنوان زمان عمل آوری و درصد آهک بهینه برای بهسازی منابع قرضه ریزدانه مورد مطالعه پیشنهاد می گردد
    کلیدواژگان: آهک، بهسازی، خاک های ریزدانه، خصوصیات زمین شناسی مهندسی، همدان
  • سیده راضیه جعفری، علی اصغر سپاهی صفحه 9
    چین های پتیگماتیک به چین های روده ای شکلی اطلاق می شود که در آنها خمش ها و پیچش های شدید در یال ها دیده می شود. این چین ها در بسیاری از میگماتیت ها و میگماتیت های تحول یافته از شیست های کمپلکس میگماتیتی منطقه سیمین دیده می شوند. اما در میگماتیت های تحول یافته از هورنفلس ها حضور ندارند. رشد و گسترش چین های پتیگماتیک میگماتیت ها، در طی جدایش لوکوسوم و مزوسوم صورت می گیرد. این فرایند توسط چین خوردگی فعال مرزهای لوکوسوم و افزایش شعبات رگه ها در طی فرآیندهای ثانویه، گسترش می یابد. اختلاف شدید رئولوژیکی بین رگه های چین خورده با زمینه از مهمترین دلایل رشد و جدایش اشکال پتیگماتیک می باشد. احتمالا گسترش زون های برشی، شیستوزیته موجود در میگماتیت های تحول یافته از شیست ها و نیز اندازه درشت کانی های موجود در آنها، گسترش این چین ها در منطقه را تسهیل کرده است.
    کلیدواژگان: پتیگماتیک، چین خوردگی، رئولوژی، لوکوسوم، سیمین، میگماتیت، همدان
  • فرزانه پورغیاثیان، ابراهیم غلامی، محمد مهدی خطیب صفحه 18
    دگرشکلی در خاور ایران ناشی از فعالیت پهنه های گسلی با روندهای متفاوت می باشد. در محدوده ی بین این پهنه های گسلی یکسری مناطق گوه ای شکل ایجاد شده که دگرریختی های متنوعی در آن مشاهده می شود. بررسی نحوه ی تغییرات دگرشکلی در پهنه های گوه ای شکل مذکور در شناخت تکوین (بخش شمالی پهنه ی سیستان) موثر است. منطقه ی مورد مطالعه یکی از این پهنه های گوه ای شکل است که در بین دو گسل امتدادلغز راستگرد کوچ (با روند شمالی– جنوبی) و شاه آباد (با روند شمال باختری– جنوب خاوری) قرار گرفته است. در محدوده این پهنه گوه ای شکل، دگرشکلی از محل همگرایی به سمت واگرایی پهنه های گسلی تغییرات عمده ای نشان می دهد. میزان کوتاه شدگی واحدهای رسوبی چین خورده ترشیری در بخش واگرایی گسلها حدود 13% است و به سمت محل همگرایی گسلها به 69% افزایش می یابد.
    کلیدواژگان: پهنه ی گوه ای، کوتاه شدگی، گسل امتداد لغز، پهنه ی ساختاری سیستان
  • سید داود محمدی، لقمان کتابی، حسین شهبازی صفحه 28
    در این مقاله نتایج حاصل از مطالعات ژئوتکنیکی بر روی خاک های باقیمانده ناشی از هوازدگی میگماتیت های منطقه سیمین ارائه گردیده است. روش تحقیق بر پایه مطالعات صحرایی و انجام آزمایش های فیزیکی و مکانیکی بر روی این خاک ها بوده است. همچنین در این تحقیق به بررسی پتروگرافی سنگ های میگماتیتی (سنگ مادر خاک های مورد مطالعه) پرداخته شده است. نتایج مطالعات نشان می دهد که خاک مذکور بر اساس رده بندی یونیفاید در رده ماسه سیلتی (SM) قرار می گیرد و از هدایت هیدرولیکی کم و مقاومت متوسطی برخوردار است. بر اساس نتایج آنالیز XRD کانی های ورقه ای و ناپایداری چون مسکویت، کلریت و ایلیت در این خاک فراوان می باشد. استفاده از این خاک ها در ساخت بتن و آسفالت توصیه نمی شود ولی جهت احداث زیر اساس راه های اصلی از کیفیت مناسبی برخوردار هستند. بنابراین پتانسیل روانگرایی با توجه به شرایط اقلیمی و ویژگی های خاک، بالا بوده و از نظر پایداری دامنه های خاکی وضعیت ناپایداری را در منطقه ایجاد می کنند.
    کلیدواژگان: خاک های میگماتیتی، خصوصیات مهندسی، میگماتیت، هدایت هیدرولیکی، ظرفیت باربری
  • علی عابدینی، شه پول مرادی، اکرم علیزاده صفحه 38
    نهشته لاتریت داش آغل در فاصله 20 کیلومتری شرق شهرستان بوکان، جنوب استان آذربایجان غربی (شمال غرب ایران) واقع می باشد. این نهشته به صورت لایه ها و عدسی های منفصل چینه سان در مرز بین دولومیت های سازند الیکا (تریاس) و ماسه سنگ های سازند شمشک (ژوراسیک) توسعه یافته است. مطالعات کانی شناسی نشان می دهند که هماتیت، گوتیت، کائولینیت، کلریت، مونت موریلونیت، ایلیت، بوهمیت، کوارتز، روتیل و پیریت کانی های اصلی کانسنگ های لاتریتی می باشند. بر اساس داده های شیمیایی، این نهشته به سه تیپ، (1) فریت، (2) فریت کائولینیتی و (3) کائولینیت بوکسیتی قابل تقسیم بندی است. بررسی ضرایب همبستگی و الگوهای توزیع عناصر در یک نیمرخ انتخابی دلالت بر نقش موثر عناصر Al و Si در توزیع و تمرکز عناصری نظیر Cr، Sc، Ba، Cs، Ga، Hf، Nb، Ta، Th، و REEs در کانسنگ ها دارد. توزیع ناموزون عناصر نادر خاکی در نیمرخ مورد مطالعه، منشاء نابرجا را برای نهشته نشان می دهد. نتایج بدست آمده از مطالعات زمین شیمیایی پیشنهاد می کنند که رفتار عناصر در طی توسعه کانسنگ ها تابعی از عواملی چون تغییر در شیمی محلول های هوازده کننده (pH و Eh)، مکانسیم آهن زدایی- آهن زایی، جذب سطحی، روبش توسط اکسیدهای فلزی، شدت لاتریت زایی، حضور در فازهای مقاوم در برابر هوازدگی و تثبیت در فازهای نئومورف می باشد. بررسی های زمین شیمیایی بیشتر ثابت می نمایند که توزیع و تثبیت عناصر نادر خاکی در کانسنگ ها توسط کانی های رسی (کائولینیت، کلریت، مونت موریلونیت، و ایلیت)، بوهمیت، روتیل، زیرکن، سریانیت، باستنازیت، و زینوتایم صورت گرفته است.
    کلیدواژگان: لاتریت، زمین شیمی، توزیع عناصر، داش آغل، بوکان
  • زهرا طهماسبی، احمد احمدی خلجی، لیلی ایزدی کیان، محسن حسنوند صفحه 60
    سنگ های دگرگونی شمال غرب الیگودرز را می توان به دو گروه ناحیه ای و مجاورتی تقسیم نمود. سنگ های دگرگونی ناحیه ای شامل اسلیت، فیلیت و شیست بوده و سنگ های دگرگونی مجاورتی شامل شیست های لکه دار و هورنفلس می باشند. مطالعات دقیق پتروگرافی این سنگ ها نشان می دهد که کانی های آندالوزیت، کردیریت و سیلیمانیت حاصل دگرگونی مجاورتی بوده اند. مطالعات ژئوشیمیایی نشان می دهد که ترکیب سنگ رسوبی اولیه قبل از دگرگونی، گریوک و یا شیل بوده است. همچنین داده های عناصر اصلی و کمیاب، غالبا سنگ آذرین آندزیتی را مولد این رسوبات نشان می دهد. نمودارهای ژئوشیمیایی متمایزکننده و آنومالی منفی عناصری نظیر Rb، Sr، K بیانگر جابجایی این عناصر در ضمن فرآیندهای دگرسانی و دگرگونی است. نمودارهای تفکیک کننده محیط های تکتونیکی نشانگر محیط مرتبط با فرورانش (جزایر قوس اقیانوسی) برای این سنگ ها می باشد. بر اساس نمودار سودوسکشن P-T و پاراژنز بیوتیت-سیلیمانیت- کردیریت، بیوتیت-سیلیمانیت و سیلیمانیت-کردیریت دمای تخمینی 670-650 درجه سانتی گراد و فشار در محدوده 5/3 کیلوبار برای دگرگونی مجاورتی برآورد می شود.
    کلیدواژگان: الیگودرز، متاپلیت، شیل، کردیریت
  • زهرا گودرزی، سیدجواد مقدسی، حسن برزگر صفحه 74
    کانسار پلی متال لک در 36 کیلومتری جنوب غرب بوئین زهرا، در کمربند آتشفشانی ارومیه – دختر و در بخش غربی زون ایران مرکزی قرار دارد. براساس شواهد صحرایی و مطالعات سنگ شناسی، قدیمی ترین رخنمون های گستره مورد مطالعه را سنگهای آذرآواری – آتشفشانی ائوسن تشکیل می دهند. تنوع وسیعی از سنگ های آتشفشانی، آتشفشانی- رسوبی، گدازه های آندزیتی، آندزیت بازالت، داسیت، تراکی آندزیت، توفها و ایگنمبریت محدوده لک را در بر می گیرد. کانه سازی درمنطقه به دو شکل هیپوژن گرمابی شامل گالن، اسفالریت، پیریت، کالکوپیریت و مگنتیت و کانه سازی سوپرژن شامل سروزیت، کالکوسیت، بورنیت و اکسیدها و هیدروکسیدهای ثانویه آهن (هماتیت و گوتیت) روی داده است. مهمترین باطله های پرکننده فضاهای خالی شامل کوارتز شانه ای، باریت و سیلیس به صورت بافتهای برشی، نواری، افشان و کلوفرم است. همراه با کانه سازی رگه ای، زونهای دگرسانی سریسیتی، آرژیلیکی، کائولینیتی، سیلیسی و پروپیلیتی تحت کنترل فرآیندهای زمین ساختی و دگرسانی گرمابی تشکیل شده است.
    میانبارهای سیال کانی سازی پلی متال لک شامل فازهای مایع و گاز هستند. مطالعه میانبارهای سیال نشان داد که دمای یکنواختی آنها بین 160 تا 280 درجه سانتیگراد و میزان شوری آنها بین7/0 تا 35/16درصد وزنی معادل نمک طعام تغییر می کند. مقایسه دمای یکنواختی(TH) و شوری میانبارهای سیال منطقه مورد مطالعه با سایر کانسارهای هیدروترمال دنیا نشان می دهد که این کانسار از نوع اپی ترمال نوع سولفیداسیون پایین می باشد.
    کلیدواژگان: کانی سازی، سیالات درگیر، پلی متال، بوئین زهرا، لک
|
  • M. H. Ghobadi, R. Babazadeh, Y. Abdi Page 1
    In current study fine grained borrow materials in ekbatan dam region located in south east of Hamedan, has stabilized. The used lime in this study, was a quick lime powder passed through sieve of 40, which added to soil by soil mass fraction of 1%, 3%, 5% and 7% and then its effect on geotechnical properties of soil during curing time of 7, 15, 30 and 45 day was investigated. Investigated Factors include, soil plasticity characteristics, uniaxial compressive strength, optimum moisture content and maximum dry density. Results showed that studied soil lose their plasticity and changed to none plastic soil after 7 day of adding lime. Also occurred changes in mineralogical composition and soil fabric lead to an increase in optimum moisture content and uniaxial compressive strength and a decrease in maximum dry density which subsequently capability of soil in engineering projects was increased. By taking into account the obtained results, curing time and lime percent of 45 day and 7%, considered as optimum curing time and optimum lime percent respectively for stabilizing of studied borrow material.
    Keywords: Lime, Improvement, Fine grained soils, Engineering Geological characteristics, Hamedan
  • Razie Jafari, Ali A. Sepahi Page 9
    The ptygmatic folds are intestinal folds that violent bends and twisting in manes can be seen in them. These folds are seen in many of the evolved migmatites and migmatitic schists in Simin area. But they are not present in migmatites evolved from hornfelses. Growing and expanding of ptygmatic folds in migmatites occurs during separation of leucosome and mesosome. This process develops in second process by the active folding boundaries of leucosome and increasing of branches of veins. A sharp rheological differences between folded veins with background is the most important reasons of growth and separation of ptygmatic shapes. Probably development of shear zones, presence of schistosity and the large size of minerals present in evolved migmatites is compatible with development of these folds in the area.
    Keywords: ptygmatic, folding, rheology, leucosome, Simin area, Migmatite, Hamadan
  • F. Porghiasian, Ebrahim. Gholami, Mohammad Mahdi. Khatib Page 18
    Deformation in the east of Iran results from activities of fault zone with different trends. In the boundaries between these fault zones, a series of tapered zones has been created that various deformations are observed in it. The study of deformation changes in mentioned tapered zone is effective in recognition of genesis (the northern part of Sistan zone). The investigated area is one of the tapered zones which has been located between two right-lateral Koch fault (with northern-southern trend) and Shahabad (with northwestern-southeastern trend). In the boundary of this tapered zone, deformation has shown major changes from the location of convergence toward divergence. The amount of shortening of sedimentary folded tertiary units is around 13% percent in faults divergence and it increases to 69% percent toward the location of faults convergence.
    Keywords: Tapered zone, Shortening, Strike, slip fault, Sistan structural zone
  • Davood Mohammadi, Loghman Ketabi, Hossein Shahbazi Page 28
    This paper, presents the results of studies on Migmatite drived residual soils of Simin. The method was based on field, physical and mechanical studies in this region. Petrographical studies also conducted on migmatite soil samples. The results of studies suggest SM in unified classification, which has low hydraulic conductivity and medium resistance. Based on XRD analysis, sheet like minerals such as muscovite, chlorite, illite are recognized. The utilize of these soils in concreting and asphalting is not recommended but for making subbase of main roads are suitable. By consideration of environmental conditions and engineering properties of studied soil, the study area has high potential of liquifaction and solifloction. Conceguently, it can be said that soil slopes here make unstable condition for the area.
    Keywords: Residual soils, Geotechnical properties, Migmatite, Hydrulic conductivity, California bearing
  • Ali Abedini, Sahpol Moradi, Akram Alizadeh Page 38
    The Dash-Aghel laterite deposit is located in ~ 20 km of east of Bukan town, south of West- Azarbaidjan province (NW Iran). This deposit was developed as stratiform semi-continous layers and lenses in the boundaries between dolomites of Elika formation (Triassic) and sandstones of Shemshak formation (Jurassic). Mineralogical studies indicate that hematite, goethite, kaolinite, chlorite, montmorillonite, illite, boehmite, quartz, rutile, and pyrite are major minerals of the lateritic ores. Based on chemical data, this deposit can be divided to three types: (1) ferrite, (2) kaolinitic ferrite, and (3) bauxitic kaolinite. Investigation of correlation coefficients and distribution patterns of elements across a selected profile indicates the effective role of Al and Si in distribution and concentration of elements such as Cr, Sc, Ba, Cs, Ga, Hf, Nb, Ta, Th, and REEs in the ores. Inharmonic distribution of REEs in the studied profile shows an allogenic origin for deposit. The obtained results from geochemical studies suggest that behavior of elements during development of ores is a function of some factors such as change in chemistry of weathering solutions (pH, Eh), deferruginizationferruginization mechanism, sorption, scavenging by metallic oxides and haydoxides, laterization intensity, presence of resistant phases versus weathering, and fixation of neomorph phases. Further geochemical investigations demonstrate that distribution and fixation of REEs in ores were occurred by clay minerals (kaolinite, chlorite, montmorillonite, and illite), boehmite, rutile, zircon, cerianite, bastnasite, and zenotime.
    Keywords: Laterite, Geochemistry, Distribution of elements, Dash, Aghel, Bukan
  • Z. Tahmasbi, A. Ahmadi Khalaji, L. Izadi, Kian, M. Hasanvand Page 60
    Metamorphic rocks are two groups of contact and regional in North West of Aligudarz. Regional metamorphic rocks in this area are composed from slate, phyllite, schists and contact metamorphic rocks are spotted schists and hornfels respectively. Petrographic studies of this rocks show that andalusite, cordierite and sillimanite minerals formed during of contact metamorphism. The geochemistry of theses rocks suggested that shale or greywacke is parent sedimentary rocks. The major and trace element show that igneous rocks (almost andesite) were primary rocks for these sediments. In comparison with average of upper continental crust, the rocks of studies area indicate of Rb, Sr, K negative anomalies cause to replacements of these elements during metamorphism and alteration. Discriminations diagrams of tectonic setting indicate a subduction zone (OIB). Based on the P-T pseudo sections and Bt-Sil- Cord, Bt-Sil and Sil-Cord paragenesis, for contact metamorphism estimated T and P were 650-670 ˚C and 3.5 Kbar respectively.
    Keywords: Aligudarz, Metapelite, Shale, Cordierite
  • Zahra Goodarzi, Dr.S.J. Moghaddasi, Dr.H. Barzegar Page 74
    Lak polymetal deposit is located in the 36 Km southwest of Boein Zahra, within the Oromieh - Dokhtar volcanic belt and western part of the central Iran zone. Based on field observations and petrogaphic studies, Eocene pyroclastic - volcanic rocks were the oldest outcrops in the studied area. A wide variety of volcanic rocks, volcano - sedimentary rocks, andesitic lavas, basaltic andesite, dacite, trachyandesite, tuffs and ignimbrites were distinguished in the study area. Mineralization is occurred in two forms: hydrothermal hypogene mineralization including galena, sphalerite, pyrite, chalcopyrite and magnetite, and supergene enrichment consist of cerussite, chalcocite, bornite and iron oxides and hydroxides (hematite and goethite). Major gangue minerals were comb structured quartz, barite and brecciated, banded, disseminated and colloform.Veins mineralization is accompanied with sericitic, argillic, kaolinitic, silicification and propylitic alteration zones which is mainly controlled by tectonic and hydrothermal processes. Fluid inclusions of polymetal Lak deposit are contained of liquid, gas and solid phases. Fluid inclusions of the study area were homogenized to liquid at temperatures between 160 and 280 °C. The inclusions gave salinities between 0.7 and 16.35 NaCl equivalent wt% and the evidences of temperature of homogenization (Th) and salinities of fluid inclusion given in this article shows that the study deposit is comparable with low sulfidation epithermal deposits.
    Keywords: Mineralization, Fluid inclusion, polymetal, Boein Zahra, Lak