فهرست مطالب

نشریه انسان و محیط زیست
سال دهم شماره 4 (پیاپی 23، زمستان 1391)

  • تاریخ انتشار: 1391/10/10
  • تعداد عناوین: 6
|
  • الهام کریمی، پروین نصیری، مجید عباسپور، محمدرضا منظم، لعبت تقوی صفحه 1
    سروصدای ناشی از تردد وسایل نقلیه یکی از عمده ترین منابع آلودگی صدا در کلان شهر ها می باشد.به منظور بررسی تراز صوتی ناشی از ترافیک، یکی از مناطق پر تردد کلان شهر تهران یعنی منطقه 14 انتخاب گردید.علت انتخاب این منطقه قرار گیری اتوبان های محلاتی، بسیج ونیز خیابان های پر تردد مثل پیروزی و17 شهریور در این منطقه می باشد. در ابتدا 6 ایستگاه جهت تعیین تغییرات تراز صوتی در بازه های زمانی مختلف روز و همچنین روزهای مختلف هفته انتخاب گردید. نتایج اندازه گیری در این مرحله نشان داد که تراز معادل صوتی بین روزهای هفته و صبح و ظهر و عصر ونیز در بازه های زمانی 10،15 و30 دقیقه تفاوت معنی داری از نظر آماری نشان نمی دهند ولی تراز معادل صوتی بین روز های کاری وروزهای پایان هفته متفاوت می باشد.در مرحله بعد 91 ایستگاه در منطقه مورد نظر انتخاب شد و تراز معادل صوت در روز های شنبه تا چهار شنبه در سه نوبت صبح (9-7) و ظهر(3-12) وعصر(8-5) برای هر ایستگاه اندازه گیری شد. بر اساس نتایج به دست آمده از مرحله اصلی این تحقیق حداکثر تراز معادل صوتی(Leq) برابرdBA 2/84 مربوط به اتوبان بسیج،مقابل قصرفیروزه می باشد که یک شاهراه ارتباطی مهم در منطقه است وحداقل ترازمعادل صوتی برابر dBA 9/59 مربوط به بیمارستان فجر می باشد.میانگین تراز معادل صوت در تمام ایستگاه ها با استاندارد صدای ایران مقایسه شد ودر تمام ایستگاه ها صدا بالاتر از حد استاندارد بود. راهکارها استفاده از دیوارهای صوتی در اتوبان بسیج،محلاتی و تعریض خیابان های هفده شهریور، پیروزی و خاوران می باشد که محل های مورد نظر بر روی نقشه مشخص گردیده اند.
    کلیدواژگان: آلودگی صوتی، تراز معادل صوت، مراکز حساس به صدا
  • مرجان سالاری، فریدون رادمنش، حیدر زارعی صفحه 13
    رودخانه ها به عنوان یکی از منابع اساسی تامین آب برای مصارف مختلف مطرح می باشند. از این رو پایش کیفیت این منابع با توجه به خشکسالی های اخیر و توسعه شهری و روستایی یکی از وظایف مهم در حیطه مدیریت محیط زیست مصوب می گردد. رودخانه کارون اهمیت بسیاری در تامین آب آشامیدنی، حفظ حیات صنعتی استان خوزستان و تامین آب کشاورزی دارد. بنابراین مدیریت و کنترل کیفیت این منبع آبی از اهمیت ویژه ای برخوردار است.
    در مطالعه حاضر، کیفیت آب رودخانه کارون با استفاده از شاخص NSFWQI ارزیابی گردید و در مرحله بعد وزن 9 عامل بررسی شده در این شاخص با استفاده از روش تحلیل سلسله مراتبی با توجه به شرایط محلی و نظرات کارشناسان متخصص در این زمینه تغییر و اصلاح گردید.
    نتایج وزن های اصلاح شده نشان داد که بیشترین ارزش وزنی به دست آمده از روش (AHP) در مقایسه با شاخصNSFWQI مربوط به پیراسنجه های اکسیژن محلول، کلیفرم و اکسیژن خواهی زیست- شیمیایی می باشد. همچنین روش استفاده شده در این مطالعه به دلیل قابلیت بالای مدیریتی، صحت و دقت قضاوت ها و مقایسات در به دست آوردن وزن نهایی معیارها ارزشمند است.
    به کار گیری روش موجود اولا تمامی اهداف تعریف شده در پروژه های کیفیت آب را با ارایه نظرات کارشناسان متخصص به منظور کاهش هزینه و همچنین در نظر گرفتن مسایل اقتصادی، اجتماعی و فنی بهبود می بخشد. به عبارت دیگر استفاده از روش AHP توام با شاخص های کیفیت آب، محدودیت های شاخص های کیفیت آب مربوط به شرایط خاص هر مکان را از بین می برد.
    کلیدواژگان: شاخص کیفیت آب، تحلیل سلسله مراتبی، رودخانه کارون و نرم افزار Expert Choice
  • رامین سلماسی صفحه 23
    افزایش فعالیت های کشاورزی به رها سازی آلاینده های گوناگون از سامانه های کشاورزی منجر می گردد که به عنوان یکی از عوامل افت کیفیت خاک و آب، مطرح می باشد. از شیوه های پاک سازی گوناگون از جمله کاربرد اصلاح گرهای شیمیایی برای کاهش زیان های مرتبط با این آلاینده ها بهره گیری می شود. در این مقاله پیرامون کاربردی ترین اصلاح گرهای شیمیایی جهت غیرفعال سازی فلزات سنگین، سازوکارهای این غیرفعال سازی ها و جنبه های زیست محیطی کاربرد این اصلاح گرها بحث فشرده ای می شود. اصلاح گرهای شیمیایی که به صورت متداول جهت غیر فعال سازی آلاینده ها کاربرد دارند در رده های فرآورده های آهن، کلسیم و آلومینیوم دار قرار می گیرند. ترکیبات فسفردار و رس های سیلیکاته، سایر فرآورده ها را تشکیل می دهند. سازو کارهای غیرفعال سازی آلاینده ها شامل یک یا ترکیبی از موارد زیر می باشد: تشکیل رسوب سطحی، جذب بر روی سطوح کانی، رسوب به صورت نمک و هم رسوبی. بررسی جنبه های محیط زیستی نشان می دهد که وجود مواد ناخواسته مانند فلزات سنگین، فلورید، سولفات، جامدات محلول و مواد پرتوزا در زایدات و باطله های صنعتی می توانند به آب های زیرزمینی آبشویی یابند و یا از طریق روانآب وارد آب های سطحی شوند. اسیدیته یا قلیاییت که با برخی از این زایدات همراه می باشد، می تواند زیان زیست محیطی جدی را به همراه داشته باشد. اصلاح گرهای شیمیایی عناصری را دارند که با تاثیر بر فعالیت برخی میکروب ها، می توانند بر روی فرآیندهای ژئوشیمیایی حیاتی مانند انحلال و تشکیل کانی، هوادیدگی و معدنی شدن مواد آلی تاثیر گذار باشند.
    کلیدواژگان: فلزات سنگین، سامانه های کشاورزی، فرآورده های صنعتی
  • محمدرضا نادری، عبدالرزاق دانش شهرکی، رضوان نادری صفحه 35
    سمیت فلزات سنگین و تجمع آن ها در زنجیره های غذایی یکی از اصلی ترین معضلات زیست محیطی و بهداشتی جوامع مدرن است. اگرچه امکان اصلاح خاک های آلوده به فلزات سنگین با استفاده از تکنیک های شیمیایی، فیزیکی و یا زیستی وجود دارد، اما روش های فیزیکی و شیمیایی اصلاح مناطق آلوده به فلزات سنگین هزینه بر، وقت گیر و تخریب کننده ی محیط زیست می باشند. از این رو، طی سال های اخیر دانشمندان و مهندسین درصدد طراحی و توسعه ی تکنیک های زیستی برآمدند که بتوانند مکان های آلوده به فلزات سنگین را بدون آنکه بر حاصلخیزی و تنوع بیولوژیکی خاک اثرات سوئی داشته باشند پاکسازی و تعدیل نمایند. گیاه پالایی از جمله فناوری های سبز و دوست دار محیط زیست است، که از لحاظ اقتصادی مقرون به صرفه و از لحاظ انرژی کم هزینه می باشد. این فناوری دربرگیرنده ی استفاده از گیاهان و ریزجانداران وابسته به آن ها جهت پاکسازی و یا تثبیت آلاینده های سمی نظیر فلزات سنگین است. در مقاله ی حاضر مروری کوتاه بر فناوری گیاه پالایی و تکنیک های مختلف آن خواهیم داشت.
    کلیدواژگان: فلزات سنگین، گیاه پالایی، استخراج گیاهی، تصفیه ی گیاهی، تبخیر گیاهی، تثبیت گیاهی
  • علی کاظمی، حبیب الله یونسی، نادر بهرامی فر صفحه 51
    شیرابه تولید شده از مواد زاید جامد در محل های دفن کنترل نشده اثرات زیادی روی محیط زیست و سلامت انسان ها می تواند داشته باشد. در مطالعه حاضر نمونه های از شیرابه محل کارخانه کمپوست در شهر اصفهان در زمستان 1389 نمونه برداری شد. پارامتر های فیزیکی و شیمیایی مختلف شامل فسفات، سولفات، اکسیژن خواهی بیوشیمیایی (BOD)، اکسیژن خواهی شیمیایی (COD)، کل جامدات (TS) و کل جامدات محلول (TDS) کل جامدات معلق (TSS)، pH و EC با استفاده روش های استاندارد و با دستگاه HACK DR 2800 اندازه گیری شد. غلظت بالایی از فسفات (88/624)، سولفات (55/1955)، BOD (32300)، COD(68000)، TS (86500)، TDS (55900)، TSS (31600)، pH (3/5) و EC (9/12) بر حسب میلی گرم بر لیتر برای تمام پارامترها بجز PH و EC اندازه گیری شد. پتانسیل آلودگی شیرابه کارخانه کمپوست اصفهان با استفاده از شاخص پتانسیل آلودگی (LPI) بررسی شد. مقدار شاخص پتانسیل آلودگی شیرابه شهر اصفهان برابر 65/54 شد. این نتیجه نشان می دهد که شیرابه تولید شده از محل کارخانه کمپوست در اصفهان پتانسیل بالایی برای آلوده کردن زمین های اطراف و آب ها به وسیله شیرابه را دارد.
    کلیدواژگان: شیرابه، اصفهان، شاخص آلودگی شیرابه
  • مرضیه مهتابی اوغانی، اکبر نجفی، حبیب الله یونسی، مظاهر معین الدینی صفحه 57
    تولید زباله نتیجه طبیعی زندگی جوامع بشری بوده و خطرات زیست محیطی ناشی از سوء مدیریت مواد زاید جامد، یکی از مشکلات اساسی است. رشد نمایی جمعیت شهرنشین کشورهای در حال توسعه در دهه های گذشته و سرعت گرفتن پدیده شهرنشینی، ضرورت توسعه پایدار محیط زیست و مدیریت کارآمد زایدات را به وجود آورده است. هدف مطالعه جاری، اعمال انواع عملیات تحلیل-های مکانی، با بهره گیری از فناوری سامانه اطلاعات جغرافیایی و اولویت بندی مکان های دفن پیشنهادی با استفاده از فرآیند تحلیل سلسله مراتبی ((AHP است. به همین منظور، ابتدا لایه های اطلاعاتی موثر در مکان یابی دفن محدوده مورد مطالعه(لایه کاربری اراضی، رودخانه ها، تالاب ها، جاده ها، مناطق حفاظتی، خاک شناسی، آب های زیرزمینی، مرفولوژی، زمین شناسی و...) شناسایی و با مراجعه به سازمان ها و مراکز اطلاعاتی تهیه شد. سپس این لایه های اطلاعاتی (نقشه های رقومی) وارد محیط نرم افزار GIS 9.2 Arc شد. در مرحله بعد با توجه به محدودیت ها، گزینه های مناسب دفن زباله با استفاده از GIS شناسایی شدند و به عنوان داده-های ورودی برای فرآیند تحلیل سلسله مراتبی به کار رفتند. نتایج این بررسی مبین این واقعیت است که 4 منطقه واقع در جنوب شهر کرج استعداد بالقوه دفن زباله را دارند. همچنین با کمک AHP امکان اولویت بندی گزینه ها و تعیین وزن معیارهای موثر در تصمیم گیری وجود دارد. نتایج این مطالعه نشان داد معیار عمق آب زیرزمینی و شیب زمین در پژوهش حاضر از اهمیت بیشتری نسبت به سایر معیارها برخوردارند و گزینه 3 دارای بیشترین شایستگی برای انتخاب محل دفن بهداشتی پسماند می باشد.
    کلیدواژگان: تصمیم گیری چند معیاره، مدیریت داده های مکانی، توسعه پایدار، مکان یابی دفن، مدیریت پسماند
|
  • Elham Karimi, Parin Nasiri, Majid Abasspour, Mohammad Reza Moghadam, Loabat Taghavi Page 1
    The main source of noise pollution in urban areas is transportation systems. In order to evaluate the level of traffic noise، one of the most populated regions of Tehran، District 14، is chosen. The main reason to choose this area is that there exist a local subways and populated roads like Pirouzi and 17 Shahrivar in this region. In order to illustrate the changes of noise levels، 6 stations in different days of week and various time spans were measured. The result of this stage showed that noise levels during different days of week and different time span during each day and also between three measured noise variables، and doesn’t show a significant statistical difference. But there is significant noise level differences between working days and weakened. Then in the next stage، 91 stations in the specified region were chosen and the noise rate in different weekdays from Saturday to Wednesday in three day times including morning (7-9 AM) noon (12-3 PM) and night (5-8 PM) is measured for each station. Based on the results of this research maximum noise equivalent level () is equivalent to 84. 2 dB (A) related to Basij highway، in front of Ghasre Firozeh that is an important highway in the area. And the least ten minutes noise equivalent level is equal to 59. 9 dB (A) related to Fajr hospital station. Average equivalent noise levels at all stations were compared with the standard recommended by Iran Department of Environment and in all stations noise levels were higher than that of the standard level. Finally some solutions for decreasing noise pollution are suggested. One of these solutions is using noise barriers in Basij high way، widening the streets of 17Shahrivar، Pirouzi and Khavaran. The related zones are located and shown on the map.
    Keywords: Noise equivalent level, Noise sensitive area, Noise pollution
  • Marjan Salari, Feridon Radmanesh, Heidar Zarei Page 13
    Rivers are discussed as sources of water supply for various uses. Thus، monitoring the quality of these resources due to the recent drought and urban and rural development is one of the important tasks in the field of environmental management. Karoon River has very importance in preparing drinking water، maintaining the industrial survival of Khuzestan province and agricultural water supply. Thus، management and control of water quality this resource has particular significance. In the present study، the Karoon water quality has been evaluated by available NSF water quality index. Subsequently، the nine present NSF parameters’ weights have been changed and modified using the analytical hierarchy process (AHP) method as well as experts’ opinions in the field in a way to satisfy local conditions. In the newly developed WQI، more weights are given to relation with these parameters it can be said that the factors like dissolved oxygen (Do)، fecal coliform (F. c) and biological oxygen demand (BOD) when compared with NSF-WQI. The method used in this study is deserving for its merits. Because it provides managers with the capability that can have the better and more accurate judgments about the final weights of the parameters. Using the present method، one can consider all purposes and objectives defined in water quality projects by taking into account experts’ opinions regarding the essential costs and economical، social and technical remarks. In this respect، the sensitivity of analyses can be changed and modified in relation to the spatial features. In other words، applying AHP method، confines the NSF utilization to a specific water quality project with the particular conditions.
    Keywords: Water quality index (WQI), Analytical Hierarchy Process (AHP), Karoon River, Expert choice software (EC)
  • Ramin Salmasi Page 23
    Pollutant discharge from agricultural systems as a result if agricultural activities is as one of the factors for soil and water quality. Various soil and water remediation techniques including the use of chemical amendments have been applied to reduce the risks associated with these contaminants. This paper reviews the use of chemical amendments for immobilizing chemical amendments، the chemistry of contaminant immobilization، and environmental concerns associated with the use of these products. The commonly used chemical amendments were grouped into aluminum-، calcium-، and iron-containing products. Other products of interest include phosphorus-containing compounds and silicate clays. Mechanisms of contaminant immobilization include one or a combination of the following: surface precipitation، adsorption to mineral surfaces (ion exchange and formation of stable complexes)، precipitation as salts، and co-precipitation. Reviews of environmental implications revealed that undesirable substances such as trace elements، fluoride، sulfate، total dissolved solids، as well as radioactive materials associated with some industrial wastes used as amendment could be leached to ground water or lost through runoff to receiving water bodies. The acidity or alkalinity associated with some of the industrial-waste amendments could also constitute a substantial environmental hazard. Chemical amendments have elements capable of affecting the activities of certain microbes that could influence geochemical processes such as mineral dissolution and formation، weathering، and organic matter mineralization.
    Keywords: heavy metals, agricultural systems, Industrial products
  • Mohammad Reza Naderi, Abdolrazagh Danesh-Shahraki, Rezvan Naderi Page 35
    Heavy metals toxicity and their accumulation in food chains is one of the main environmental and healthful problems in current modern societies. Although، remediation of metal-contaminated soils is possible by chemical، physical and biological techniques، but chemical and physical methods of metal-contaminated lands remediation are costly، time consuming and environment destructive. Hence، in current years scientists and engineers to think of design and development of biological techniques that be able to modify heavy metals-contaminated sites without to have evil effects on soil fertility and biodiversity. The phytoremediation is an environment friendly and green technology that is cost effective and energetically inexpensive. This technology is included the use of plants and their associated microorganisms for elimination or stabilization of toxic contaminants such as heavy metals. In this article، we have a brief review on phytoremediation technology and its various techniques.
    Keywords: Heavy metals, Phytoremediation, Phytoextraction, Phytofiltration, Phytovolatilization, Phytostabilization
  • Ali Kazemi, Habibollah Younesi, Nader Bahramifar Page 51
    The leachate produced of solid waste in uncontrolled landfills can cause many impacts on the environment and human health. In the present study، the samples of leachate of compost plant in Isfahan city were sampled in the winter of 2010. Physicochemical parameters including: pH، EC، phosphate، sulfate، biological oxygen demand (BOD)، chemical oxygen demand (COD)، total solid (TS)، total dissolved solid (TDS)، and total suspended solid (TSS) were measured using standard methods and HACK DR 2800. High level of phosphate (624. 88)، sulfate (1955. 55)، BOD (32300)، COD (68000)، TS (86500) TDS (55900)، TSS (31600)، pH (5. 3) and EC (12. 9) on the basis of mg/l for all of the parameters except pH and EC was observed. Potential of pollution leachate of compost plant in Isfahan considered to leachate pollution index (LPI (. Leachate Pollution Index (LPI) for Isfahan of leachate was 54. 65. This result showed that leachate produced of solid waste of compost plant in Isfahan high potential have for pollution of the surrounding land and water by the leachate.
    Keywords: leachate, Isfahan, Leachate Pollution Index
  • Marzeyeh Mahtabi Oghani, Akbar Najafi, Habibollah Yunesi, Mazaher Moeinaddini Page 57
    Waste is natural consequence of living human communities and environmental hazards caused by environmental mismanagement of solid waste، one of the fundamental problems. In the past decades، exponential growth of urban population in developing countries and speed of urbanization phenomenon، necessity of sustainable environmental development and efficient management of waste has been established. The main goal of the current study is applying various spatial analyses، with use of geographic information system in order to optimum site selection with minimal environmental adverse effects for urban waste burial. Therefore، in first step، effective data Layers in determining of landfill of Karaj (like land use، streams، wetlands، roads، morphology، ground waters، demography، wildlife parks، soil) from data bases and organization was prepared. The second step، data layers (digital maps) was entered to soft ware of Arc GIS9. 2 and data base was created. In the third step، according to limitations، suitable areas، was extracted with using of GIS. Then these data was applied as appropriate options (input data) for AHP. In the next step for determination priorities of the remaining landfill options according to criteria is used by AHP. The results of this study are evidence that GIS and AHP provide performance tools for selection and priority of optimal landfill. Also in this study land slope and ground water have more important than other criteria and option 3 is most appropriate for landfill.
    Keywords: multi criteria decision making, data location management, sustainable development, landfill site selection, solid waste management