به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
فهرست مطالب نویسنده:

m. javan

  • A. Javan*, M. Javan, M. Jafarpour, D. Moazzami, A. Moeini

    We introduce a new invariant vulnerability parameter named J-Tightness or J(G) for graphs. As a stability measure, its properties along with comparisons to other parameters of a graph are proposed. We show how it is calculated for complete graphs and cycles. We show that J-Tightness better fits the properties of vulnerability measures and can be used with more confidence to assess the vulnerability of any classes of graphs.

    Keywords: Network Vulnerability, Connectivity, BindingNumber, Scattering Number, Rapture Degree, Integrity, Toughness, Tenacity, J-Tightness
  • نگار باقری سیدشکری*، افشین اقبال زاده، میترا جوان
    سرریز جانبی یکی از سازه های انحراف آب است که به طور گسترده برای اهداف گوناگونی از جمله انحراف آب اضافی در سیستم های جمع آوری فاضلاب شهری، شبکه های آبیاری، کنترل ارتفاع سیلاب ها و موارد دیگر به کار گرفته می شود. در بعضی شرایط ممکن است جریان متغیر مکانی بر روی سرریز جانبی همراه با پرش هیدرولیکی باشد که این حالت کمتر مورد توجه محققین قرار گرفته است. در این مقاله پس از شبیه سازی پرش هیدرولیکی با استفاده از نرم افزار Flow-3D و اعتبارسنجی مدل با استفاده از نتایج آزمایشگاهی، مشخص شد که مدل عددی قادر به شبیه سازی مناسب پرش هیدرولیکی می باشد. سپس تاثیر تغییر عمق پایین دست بر خصوصیات پرش هیدرولیکی بررسی شد. با کاهش عمق پایین دست، محل شروع پرش هیدرولیکی بسمت انتهای پایین دست سرریز حرکت می کند و با افزایش عمق پایین دست پرش هیدرولیکی حذف می گردد. با حرکت به سمت انتهای سرریز توزیع سرعت طولی به علت تشکیل ناحیه جدایی جریان در نزدیکی بسترکانال اصلی غیریکنواخت شده و نواحی با سرعت های منفی در این ناحیه تشکیل می شود.
    کلید واژگان: پرش هیدرولیکی، سرریز جانبی، شبیه سازی عددی، عمق پایین دست، Flow-3D
    N Bagheri Seyyed Shekari *, A Eghbalzadeh, M Javan
    Side weir is one of the water diversion structures which is widely used for different purposes such as deviation of the excess water in the urban wastewater collection systems, irrigation networks, control of the floods’ elevation, etc. In some conditions, a spatially varied flow over the side weir might include hydraulic jump which has been less studied yet. In present study the hydraulic jump issue was investigated using a Flow-3D software model. The model was validated with experimental data and the results showed that the numerical model was able to simulate the hydraulic jump with reasonable accuracy. Then, the effect of the downstream water depth on the characteristics of the hydrulic jump was investigated. By decreasing the downstream water depth, the location of the hydraulic jump moved toward the weir downstream end while the hydraulic jump was removed by increasing the downstream water depth. By moving towards the end of the weir, the longitudinal velocity distribution became non-uniform due to formation of the separation zone near the main channel bed flow and the areas with negative velocities were formed.
    Keywords: Downstream depth, Flow-3D, Hydraulic jump, Numerical simulation, Side weir
  • اکرم اسدی پرتو، افشین اقبال زاده*، میترا جوان
    یکی از روش های کاهش آبشستگی، استفاده از شکاف در پایه های پل می باشد. در این تحقیق جریان اطراف پایه پل استوانه ای شکل بدون شکاف و شکاف دار در بستر صاف توسط نرم افزار FLOW-3D شبیه سازی گردید. برای بستن معادلات ناویراستوکس مدل آشفتگی ε-k RNG مورد استفاده قرار گرفت. ابتدا نتایج مدل عددی در خصوص پارامترهای سرعت و تنش برشی در حالت پایه بدون شکاف با نتایج آزمایشگاهی مقایسه شد، که تطابق نسبتا مناسبی را نشان داد. سپس اثر شکاف و عرض آن بر الگوی جریان در اطراف پایه بررسی شد. با افزایش عرض شکاف، جریان های چرخشی تشکیل شده در پایین دست پایه، تضعیف شده و در حالت شکاف با بیشترین عرض کاملا حذف شدند. با افزایش عرض شکاف، مقدار سرعت حداکثر ایجاد شده در مجاورت پایه کاهش یافته، ولی محل تشکیل آن نسبتا ثابت بود. همچنین بدلیل اینکه با افزایش عرض شکاف، در سرعت طولی جریان نزدیک شونده به پایه کاهش کمتری ایجاد می گردید، الگوی تنش برشی در مجاورت بالادست پایه رفتاری مشابه حالت جریان بالا دست پایه نشان می داد.
    کلید واژگان: الگوی جریان، پایه پل، شبیه سازی عددی، شکاف FLOW، 3D
    A. Asadi Parto, A. Eghbalzadeh*, Mjavan
    Using slot in bridge piers is one of the reduction methods of scour depth around them. In this study، the flow field around a cylindrical pier located in a smooth bed with and without slot was simulated using FLOW-3D software. The RNG k-ε turbulence model was used for closing the Navier-Stokes equations. The comparison of the numerical results and laboratory measurements for one bridge pier without slot showed that the model could predict velocity and shear stress parameters with reasonable accuracy. The influence of the slot width on the flow field around bridge pier was then investigated. The formed vortex at downstream of the pier became smaller by increasing slot width. In the largest slot case، this vortex was completely disappeared. Also، by increasing slot width، the value of the maximum velocity occurred adjacent the pier decreased، but its location was fairly constant. Finally، because of the lower reduction of the longitudinal velocity of the flow in the vicinity of the upstream face of the pier for the largest slot، shear stress pattern in this area was similar to that of the upstream area.
    Keywords: Bridge pier, Flow pattern, FLOW, 3D, Numerical simulation, Slot
  • فرشته نورمحمدی دهبالایی، میترا جوان*، مرتضی افتخاری، افشین اقبال زاده
    با توجه به اهمیت مخازن در تامین آب شرب و کشاورزی، بررسی کیفیت آب مخازن از اهمیت بسزایی برخوردار است. در این مقاله از مدل دوبعدی متوسط گیری شده عرضی CE-QUAL-W2 برای شبیه سازی ارتفاع سطح آب، دما و پارامترهای کیفی از قبیل اکسیژن محلول و مواد مغذی در مخزن سد ایلام استفاده شده است. پس از شبیه سازی تراز سطح آب، دما و اکسیژن محلول به ترتیب در دوره واسنجی با خطای متوسط مطلق °C 73/0 و mg/l 41/1 و در دوره صحت سنجی با خطای متوسط مطلق °C 18/1 و mg/l 18/1 شبیه سازی گردید که تطابق نسبتا مناسبی میان نتایج حاصل از مدل سازی عددی و داده های اندازه گیری شده مشاهده می شود. پس از واسنجی و صحت سنجی مدل به منظور بررسی تغییرات هیدرولوژیک بر روی کیفیت آب مخزن دو سناریو براساس سال های نرمال و خشک تعریف شد. نتایج سال خشک نشان دهنده یک لایه بندی شش ماهه از فروردین تا شهریور می باشد. در سال خشک به علت بالارفتن زمان ماند آب در مخزن، غلظت کلروفیل A در تابستان افزایش یافته که باعث تغییر وضعیت مخزن از حالت مزوتروفیک به اوتروفیک می شود. لازم به ذکر می باشد که نحوه تغییرات اکسیژن محلول مشابه دما می باشد. نتایج سال نرمال نشان دهنده یک لایه بندی هفت ماهه از فروردین تا مهرماه می باشد که در این سال به علت کاهش زمان ماند آب، غلظت کلروفیل A در تابستان کاهش یافته و باعث تغییر وضعیت مخزن از حالت مزوتروفیک به الیگوتروفیک می شود.
    کلید واژگان: تغییرات هیدرولوژیک، شبیه سازی عددی، مخزن سد ایلام، CE، QUAL، W 2
    F. Nourmohammadi Dehbalaei, Mjavan *, Meftekhari, A. Eghbalzadeh
    The assessment of water quality in reservoirs is essential because reservoirs are often one of the main sources of water for human consumption and irrigation. In this paper، a two-dimensional، laterally averaged CE-QUAL-W2 model was used to simulate the water surface elevation، water temperature، and water quality parameters such as dissolved oxygen and nutrients in the Ilam dam reservoir. After simulating the water level، the temperature and dissolved oxygen were respectively simulated with an average absolute error 0. 76°C and 1. 41mg/L during the calibration period and 1. 18°C and 1. 18 mg/l during the verification period. The model results showed relatively good agreement between the measured and simulated data. After model calibration and validation، in order to investigate the hydrological changes on reservoir water quality، two inflow scenarios were simulated based on the dry and normal years. The results of the dry year indicated a six-month stratification period from April to September. Due to increase of water retention time in the dry years، Chlorophyll A concentrations increased in summer so that the reservoir conditions changed from mesotrophic to eutrophic. A similar pattern was observed between the temperature and dissolved oxygen profiles. In the normal year، stratification period included seven months from April to October. Due to decrease of water retention time in reservoir in the normal year، Chlorophyll A concentrations decreased in summer so that the reservoir conditions changed from mesotrophic to oligotrophic condition.
    Keywords: Hydrological Changes, Simulation, Ilam Reservoir, CE, QUAL, W2
  • شراره محمودی نیا، میترا جوان*، افشین اقبال زاده

    سرریزهای جانبی از انواع سازه های هیدرولیکی می باشند که در انحراف آب اضافی در سیستم های جمع آوری فاضلاب شهری و همچنین در شبکه-های آبیاری و زهکشی به عنوان تنظیم کننده سطح آب به کار برده می-شوند. در تحقیق حاضر با استفاده از نرم افزار فلوئنت الگوی جریان و سطح آزاد آب در یک کانال همراه با سرریز جانبی لبه تیز با بهره گیری از مدل آشفتگی RSM و روش VOF شبیه سازی شده است. مقایسه تغییرات طولی تراز سطح آب و دبی عبوری از کانال اصلی شبیه سازی شده با نتایج آزمایشگاهی نشان دهنده قابلیت مدل عددی در شبیه سازی الگوی جریان از روی سرریزهای جانبی می باشد. با مقایسه الگوهای جریان عبوری از روی سرریز جانبی در بیشترین و کمترین نسبت آبگیری مشخص گردید که فاصله صفحه تقسیم جریان از دیواره سمت آبگیر در عمق تغییر می نماید. همچنین اندازه و محل قرار گیری جریان گردابه ای سه بعدی تشکیل شده، متاثر از نسبت آبگیری سرریز جانبی است.

    کلید واژگان: سرریز جانبی، سطح آزاد، شبیه سازی عددی، فلوئنت
    Sh Mahmodinia, M. Javan, A. Eghbalzadeh

    Side weirs are flow diversion devices which are widely used in irrigation and drainage systems as a head regulator of distributaries, land drainage and urban sewage systems. In this research, flow pattern and free surface of water in a channel with a sharp crested side -weir is simulated by using FLUENT software. The volume of fluid (VOF) scheme and RSM turbulence model are used for numerical simulation of the turbulent free surface flow. Comparison between numerical results and laboratory measurements of water surface profile and channel discharge show that the model can predict the flow pattern over side weir with reasonable accuracy. By comparing flow patterns over a side-weir within the maximum and minimum discharge ratio it was revealed that, distance of the dividing stream surface from left wall varies in depth. Also size and location of 3D vortex flow is dependent on discharge ratio of side-weir.

    Keywords: FLUENT, Free surface, Numerical simulation, Side, weir
  • M. Hamzei, M. Javan, A. Eghbalzadeh
    During a critical river flood event, a bridge deck may become partially or completely submerged bythe flow. The deck submergence may be a critical condition for structural stability of river bridges. Inthis paper, the mean flow fields around a submerged bridge deck and the time averaged dragcoefficient on it have been simulated by using FLUENT software. The turbulence models consideredare the standard k  , renormalization group (RNG) k  and Realizable k  . In these simulations,the VOF and rigid lid methods have been used for free surface simulation. Reconstruction and Finitevolume schemes have been used to determine the position of the free surface in VOF method and theresults have been compared. Simulation results of time averaged drag coefficient show that in the caseof partially submerged deck, Geometric Reconstruction Scheme in VOF method with standardturbulence model is in better agreement with the experimental results. In the case of fully submergeddeck, RNG k  and Realizable k  turbulence models provide better accuracy than standardturbulence model. Also, simulation results show that Reconstruction based schemes in VOFmethod are not capable to simulate mixing of water and air and finite volume schemes have to be usedfor mixing of water and air simulation.
  • A. Mardasht *, N. Talebbeydokhti, M. Javan

    Stepped spillways with high roughness initiate the formation of vertical turbulence with high intensity. This turbulence causes air entrainment and as a result a two phase flow is formed. Energy dissipation under this condition is one of the most important aspects of the complicated nature of stepped spillways. In this study, energy loss was determined by the method of downstream scour depth measurement. Two slope angles of 18.8 and 28 degrees with four step heights of 3, 5, 8 and 12 centimeters and five discharges of 6, 10, 15, 20 and 25 liters per second were implemented (total of 40 runs). The results showed that when the above method was compared to the method of air concentration measurement, the scour depth method was simpler and more practical. The analysis also showed that a strong correlation exists between roughness Froude number and flow condition for the three different cases. This is an indication of the significance of this dimensionless number in stepped spillway studies. Finally the method used in this study for residual energy measurements under a wide range of flow condition, yielded a new empirical formula. Roughness Froude number, number of steps and slope of the spillway are the main parameters of this formula.

  • محمدعلی شاهرخ نیا، محمود جوان

    کی از انواع دریچه های کنترلکننده جریان آب که در دنیا در مقیاس وسیع از آن استفاده میشود، دریچه قوسی است. علیرغم کاربرد وسیع، تخمین دبی این دریچه ها کار سادهای نیست و مطالعات چندانی در این زمینه انجام نشده است. در تحقیق حاضر چند رابطه جدید برای تخمین ضریب دبی جریان در دریچه های قوسی در شرایط مستغرق و آزاد ارایه شده که با استفاده از آنها، براورد دبی جریان با دقت بیشتری انجام میشود. در این روابط ضریب دبی جریان، به عنوان تابعی از نسبت بار آبی به عمق بازشدگی دریچه و زاویه لبه دریچه با خط افق، در نظر گرفته شده است. برای بهدست آوردن این روابط، از داده های آزمایشگاهی منتشر شده توسط محققان قبلی و برازش چند متغیره غیرخطی استفاده شده است. اعتبار روابط به دست آمده، با بررسی چند پارامتر آماری، نظیر میانگین خطای تخمین و بیشینه خطای تخمین و خطای استاندارد تخمین و همچنین با استفاده از چند مجموعه داده اندازهگیری شده میدانی، تایید شد. در تحقیق حاضر محدوده دبی جریان مورد استفاده برای دریچه های قوسی آزاد در آزمایشگاه بین 030/0 تا 320/0 متر مکعب بر ثانیه و در میدان بین 110/0 تا 6/239 متر مکعب بر ثانیه بوده است. نتایج نشان داد که روابط به دست آمده، برای تخمین ضریب دبی جریان در دریچه های قوسی مستغرق و آزاد مناسب است. با استفاده از این روابط، متوسط خطای تخمین ضریب دبی را در حالت مستغرق، تا 02/0 و در حالت آزاد تا 01/0 میتوان کاهش داد.

    کلید واژگان: هیدرولیک، دریچه قوسی، جریان آزاد، جریان مستغرق
    M.A. Shahrokhnia, M. Javan

    Radial gates are used widely as a kind of control gates, worldwide. Although they are used widely, discharge estimation is not easy and few studies have been cited in the literature. In the present study, new relationships for estimation of discharge coefficients under free flow and submerged conditions are obtained. In these relationships, the dischargecoefficient was related to the gate lip angle and the ratio of the water head to the gate opening height. By using these relationships, the accuracy of estimated discharge is increased. For this purpose, nonlinear multiple regression analysis and a set of laboratory data were used. Some statistical parameters such as maximum error, average error and standard error and three sets of field observed data were also used for evaluation of the relationships. One set of these data was collected in the present study and the others from previously published studies. The ranges of used observed discharge data were 0.030 to 0.320 and 0.010 to 0.180 m3s-1 in laboratory under free flow and submerge conditions, respectively. For the field observed data, these ranges were 0.11 to 239.6 and 0.05 to 209.02 under free flow and submerged conditions. Results showed that the relationships obtained could be appropriate for estimation of discharge coefficients in free flow and submerged radial gates. Relationships including gate lip angle, gate opening and upstream water depth are more reliable than the ones using only gate opening and upstream water depth. The average values of discharge estimation error could be about 2 and 1 percent under submerged and free flow conditions, respectively.

    Keywords: Hydraulics, Free Flow, Submerged Flow, Radial Gates
  • تورج هنر، محمود جوان، علیرضا کشاورزی

    سرریزهای جانبی از جمله سازه های آبی می باشند که به طور گسترده ای در سیستم های آبیاری، زه کشی و فاضلاب مورد استفاده قرار می گیرند. در پژوهش حاضر تاثیر طول و ارتفاع تاج سرریز جانبی مایل بر ضریب تخلیه در جریان های زیر بحرانی، در کانال های منشوری و غیر منشوری مستقیم مستطیلی بررسی گردید. بررسی نتایج 675 آزمایش، نشان داد که ضریب تخلیه به عدد فرود در ابتدای سرریز، نسبت ارتفاع سرریز به عمق آب در ابتدای سرریز، عمق آب روی سرریز به طول سرریز، و عامل منشوری کانال بستگی دارد. در این پژوهش، بر اساس داده های آزمایشگاهی، مدلی ارائه شد که می تواند در شرایط جریان زیر بحرانی ضریب تخلیه را پیش بینی نماید. در نهایت، مدل ارائه شده با گزارش های پژوهندگان دیگر در شرایط مختلف شیب جانبی و کف مورد ارزیابی و آزمون قرار گرفت. نتایج به دست آمده در برآورد دبی سرریز، با خطای نسبی کمتر از ده درصد هم خوانی مناسبی را نشان داد.

    کلید واژگان: سرریزجانبی مایل، ضریب تخلیه، کانال های غیر منشوری
    T. Honar *, M. Javan, A. Keshavarzi

    Side weirs as flow diversion devices are widely used in irrigation, land drainage and urban sewage systems. In the present study, the effects of the length and height of inclined side weir crest on discharge coefficient were investigated in prismatic and nonprismatic rectangular channels.. In this study, 675 laboratory tests were conducted. Analysis of experimental tests showed that the discharge coefficient is strongly correlated with uptream Froude number, height of weir to depth ratio at upstream of weir, ratio of water depth on weir to length of weir, and with prismatic factor. Based on experimental results, a model is proposed. The model is capable of estimating the discharge coefficient under subcritical flow conditions. Finally, the data from the proposed model was compared with those obtained by other researchers under different side and bed slopes. There was a good agreement with a relative error of less than ten percent.

    Keywords: Inclined side weir, Discharge coefficient, Non-prismatic channel
سامانه نویسندگان
  • دکتر محمد جوان
    دکتر محمد جوان
    استاد فیزیولوژی، دانشکده علوم پزشکی، دانشگاه تربیت مدرس، تهران، ایران
  • مصطفی جوان
    مصطفی جوان
    پژوهشگر علوم انسانی، تاریخ
اطلاعات نویسنده(گان) توسط ایشان ثبت و تکمیل شده‌است. برای مشاهده مشخصات و فهرست همه مطالب، صفحه رزومه ایشان را ببینید.
بدانید!
  • در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو می‌شود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشته‌های مختلف باشد.
  • همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته می‌توانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
  • در صورتی که می‌خواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال