به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
فهرست مطالب نویسنده:

reza kaveh

  • رضا کاوه، محمد سفید*، محسن مظفری شمسی
    در مطالعه حاضر اختلاط دو سیال با لزجت های متفاوت در یک میکرو کانال مجهز به پره نوسانی منحنی شکل به روش شبکه بولتزمن با زمان آسایش چندگانه شبیه سازی شده و اثرات شکل هندسی، سرعت و دامنه نوسان پره منحنی شکل و نسبت لگاریتمی لزجت بر بازده اختلاط بررسی شده است. اکثر مطالعات صورت گرفته، به بررسی اختلاط دو سیال کاملا یکسان پرداخته اند درصورتی که اختلاط زمانی مفهوم پیدا می کند که خواص دو سیال مخلوط شونده متفاوت باشد. همچنین در مطالعات صورت گرفته در زمینه اختلاط، پره در میکرو کانال به شکل استوانه و یا مستطیل در نظر گرفته شده است. در این تحقیق برای اولین بار از پره منحنی شکل جهت اختلاط دو سیال با لزجت متفاوت استفاده شده است. شبیه سازی در عدد رینولدز 80، عدد اشمیت 10 انجام شده و برای پره منحنی از شکل ایرفویل NASA/LANGLEY LS(1)-0417 (GA(W)-1) استفاده شده است. در بررسی اثر شکل هندسی، نتایج نشان داد که بازده اختلاط دو سیال با لزجت یکسان و متفاوت، در میکرو کانال مجهز به پره منحنی شکل بالاتر از میکرو کانال مجهز به پره مستطیل شکل است. نتایج بررسی اثر سرعت و دامنه نوسان پره بر بازده نیز نشان داد که در دامنه های نوسان بررسی شده با افزایش عدد استروهال، بازده نیز افزایش می یابد و بازده اختلاط در دامنه نوسان 5/0 در تمام اعداد استروهال بررسی شده یک مقدار بهینه را دارد. همچنین با افزایش نسبت لگاریتمی لزجت در اعداد استروهال بررسی شده، بازده کاهش می یابد و این کاهش در اعداد استروهال بالا قابل ملاحظه است.
    کلید واژگان: اختلاط، میکرو کانال، لزجت متفاوت، روش شبکه بولتزمن با زمان آسایش چندگانه، پره منحنی شکل نوسانی
    Reza Kaveh, Mohammad Sefid *, Mohsen Mozafari Shamsi
    In the present study, mixing of two fluids of different viscosities in a micro channel with an oscillating curved stirrer was simulated by MRT-LBM and the effect of geometric shape, oscillating speed and amplitude and viscosity logarithmic ratio on mixing efficiency was analyzed. Most researches in this field have studied the mixing of two same fluids but the mixing makes sense when two miscible fluids have different properties. Also in these researches, stirrers in micro channel are considered cylinder or rectangle shape. In this study, a curved stirrer was used for mixing two fluids of different viscosities in micro channel for the first time. The simulation was performed at Re=80 and Sc=10 and NASA/LANGLEY LS(1)-0417 (GA(W)-1) airfoil shape was used for curved stirrer. At the study of geometric shape, results showed that mixing efficiency of two fluids of same and different viscosities in micro channel with oscillating curved stirrer was higher than micro channel with oscillating rectangle stirrer. The results of stirrer oscillating amplitude and velocity survey revealed that increase in Strouhal number causes increase in mixing efficiency on studied oscillating amplitude and Optimum efficiency is on oscillating amplitude 0.5 on all studied Strouhal numbers. Also mixing efficiency decreases with increase of viscosity logarithmic ratio on studied Strouhal numbers and this decrease is noticeable in high Strouhal numbers.
    Keywords: Mixing, Micro channel, Different viscosities, MRT-LBM, Oscillating curved stirrer
  • Maryam Shojaie *, Reza Kaveh

    In the present study, the effect of alumina on the pore structure and hydrothermal stability of nanostructured silica was investigated. SiO2 and SiO2-15wt%Al2O3 membranes were prepared by dip coating on mesoporous γ-Al2O3 coated macroporous α-alumina support. The particle sizes of sol were increased by adding of alumina to silica sol. Through the addition of the alumina up to 15 wt% and heat treatment at 500 °C, the silica structure was remained amorphous and the thickness of the top layer was in the range of 200-500 nm because of an increase in the sol viscosity. FT-IR analysis showed the formation of Si-O-Al bonds after heat treatment in the SiO2-15wt%Al2O3 membrane. After placing the membranes under hydrothermal test, the pore volume and size were slowly decreased by means of alumina addition in that order. Furthermore,  the permeability of gas molecules (H2, He, CO2,…) from the silica membrane was abruptly decreased compared to the SiO2-15wt%Al2O3 membrane. Therefore, the membrane containing the added alumina had a more suitable hydrothermal stability due to the formation of more stable Si-O-Al bonds.

    Keywords: Nanostructure silica, Silica-alumina membrane, Hydrothermal stability, Nanoporous Membrane
  • رضا کاوه *، محمدرضا نظری، محمد سفید
    از خطوط لوله برای انتقال انواع محصولات، خصوصا در صنعت نفت و گاز استفاده می شود. برای داشتن عملکرد موثر، خطوط لوله باید در بازه های زمانی مشخص پیگ رانی شوند. پیگ ها باید در سرعت ثابتی حرکت کنند و سرعت کنترل نشده و فزاینده پیگ می تواند بسیار خطرناک باشد. برای کنترل سرعت پیگ و مطالعه رفتار دینامیکی آن و همچنین تخمین متغیرهای مرتبط با حرکت پیگ، مطالعه رفتار سیال در اطراف پیگ ضروری به نظر می رسد. در این تحقیق، جریان سیال اطراف پیگ متحرک در لوله به کمک نرم افزار تجاری قدرتمند ANSYS CFX شبیه سازی شده است. در ابتدا نیروی وارد بر پیگ ساکن برای بای پس های مختلف به دست آمده و با نتایج موجود مقایسه شده است که انطباق خوبی را نشان می دهد. در ادامه، برای حرکت شبکه اطراف پیگ متحرک در لوله، از روش شبکه بندی مجدد در تکنیک شبکه دینامیک استفاده شده است. میدان جریان بالادست و پایین دست پیگ و همچنین سرعت، شتاب و موقعیت پیگ در زمان های مختلف به دست آمده است. بدین منظور، معادلات ناویر-استوکس و بقای جرم برای جریان سیال لزج تراکم ناپذیر حل و از مدل تلاطم k-ε برای شبیه سازی توربولانس استفاده شده است. در بررسی حرکت پیگ داخل لوله نتایج نشان داده اند که ابتدا، نیروی وارد بر پیگ از طرف سیال زیاد است و با گذشت زمان به دلیل کاهش نیروی وارد بر پیگ، شتاب پیگ به سمت صفر میل می کند و سرعت پیگ ثابت می گردد. همچنین، با گذشت زمان و با جلو رفتن پیگ، به علت کاهش شتاب پیگ، تغییرات سرعت و فشار در طول لوله کاهش می یابند به طوری که شرایط جریان به سمت حالت دائم پیش می رود. در بررسی تاثیر وجود پیگ بر سرعت جریان در طول لوله نیز مشخص می گردد که بیشترین تاثیر وجود پیگ بر روی سرعت جریان خروجی پیگ است و در فواصل دورتر از پیگ تغییرات سرعت کمتر هستند.
    کلید واژگان: پیگ، خط لوله، میدان جریان، جسم صلب، شبکه دینامیک، دینامیک محاسبات سیالات
    Reza Kaveh*, Mohammadreza Nazari, Mohammad Sefid
    Pipelines are used to transport products mainly in the oil and gas industry. For effective operation, the pipelines must be pigged in periods of time. For a suitable performance, pigs should move at a constant velocity. It seems that the study of fluid flow around a moving pig, the pig dynamics and also, estimation of the pig movement variables is essential to control pig velocity. In this research, fluid flow around moving pig in pipeline is simulated by ANSYS CFX. At first, the force on static pig in pipeline for the different bypasses was obtained and compared with the previous study and the good agreement has been observed. Then,for mesh movement around moving pig in pipeline the remeshing method in the dynamic mesh technique was used. up and downstream distribution of pig and also velocity, acceleration and position of pig in different time are obtianed. Therefore, the Navier-Stokes equations for uncompressible viscous fluid flow are solved. The k-εturbulence model is used to simulate turbulence. In the study of pig movement through the pipe, the result showed that at first, the fluid force on pig is high and as time goes on, is reduced becouse the relative velocity between the pig and fluid flow is decreased and become equal to external force (friction force) so the net force on pig get zero. Thus, the pig acceleration is approaching to zero and the pig velocity is being constant. Also as pig goes forward the velocity and pressure through the pipe decrease because of pig acceleration reduction. So that the fluid condition becomes permanent. In the study of effect of pig on fluid velocity through the pipe, it is obvious that the most effect is on fluid velocity in pig output and in the long distance from the pig the it’s changes is low.
    Keywords: Pig, Pipeline, Fluid Domain, Dynamic Mesh, Computational Fluid Dynamics
بدانید!
  • در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو می‌شود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشته‌های مختلف باشد.
  • همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته می‌توانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
  • در صورتی که می‌خواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال