s. azizzadeh
-
سیستم دال و دیوار بتنی درجا از سیستم های متداول در ایران و سایر نقاط جهان است که به علت عملکرد مناسب آن در زلزله های گذشته، کاربردش گستردگی بیش تری یافته است. در دستورالعمل های مربوط به ارزیابی آسیب پذیری، عموما برای سازه های موجود از این دست رویکرد جداگانه یی منظور نشده است. به دلیل موجود نبودن استانداردهای ویژه ی این ساختمان ها و کمبود اطلاعات درمورد نحوه ی ارزیابی عملکرد لرزه یی با در نظر گرفتن امکان ایجاد رفتار غیرخطی در دیوار، انجام مطالعات کاربردی بهسازی روی سیستم دال و دیوار از اهمیت خاصی برخوردار است. در این نوشتار برای بررسی دقیق تر عملکرد یستم، از روش استاتیکی غیرخطی به جای روش های ساده تر و غیرواقعی تری که رفتار دیوار را تنها در حالت خطی در نظر می گیرند، بهره گرفته شده است. بررسی سازه های دال و دیوار با پلان متقارن و طراحی اولیه براساس استاندارد 2800 ایران در سازه های 4، 8 و 12 طبقه با هدف بهسازی مطلوب دستورالعمل بهسازی لرزه یی انجام گرفته و برای اجرای تحلیل های غیرخطی، از نرم افزار D3 P e r f o r m R a m استفاده شده است.
کلید واژگان: ارزیابی آسیب پذیری، تحلیل ایستای غیر خطی، سیستم دال و دیوار بتنی، المان رشته ییThe Wall & Slab system is one of the most widespread conventional systems used in Iran and other countries like Turkey, Chile, and Canada, etc. Buildings with a Wall & Slab system diverge from other conventional reinforced concrete structures due to the absence of beams and columns in their structural system. Post-earthquake reconnaissance missions reported the surprisingly good seismic behavior of structural wall buildings, and, because of their good performance in past earthquakes, this system has been widely used since then. Instructions of damage assessment have not mentioned any separate procedure for structures of this type. Practical studies on Slab & Wall systems specifying nonlinear behavior to the walls are very important because there is no special standard for these buildings and information about how to evaluate their seismic behavior is not sufficient.Vulnerability assessment has become more important than ever since structural designers started to employ performance based design methods, which require that structural and member behaviour at different limit states be predicted precisely. For investigation into the performance of systems, this article uses nonlinear static analysis instead of other simple and unreal methods that only estimate wall behavior in linear form. Investigations into Slab & Wall structures with simple symmetric plans and primary designs, on the basis of the 3rd version of the Iranian Seismic Building Code (2800), in four, eight and twelve stories, is done for the basic safety objective (BSO) level of instruction for seismic rehabilitation. These buildings are made as three-dimensional space frame structures, with shear walls in both orthogonal directions, in ETABS 9.1.6 software, according to ACI 2005 for the initial design, and Ram Perform 3D 4.0.1 software is used for nonlinear analysis. For modelling the nonlinear behaviour of the wall, in this analytical program, a section analysis using a fibre model was employed. The results of analysis showed that the structures had the expected performance.
Keywords: Damage Assessment, Nonlinear Static Analysis, Wall, Slab System
- در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو میشود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشتههای مختلف باشد.
- همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته میتوانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
- در صورتی که میخواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.