proposed algorithm
در نشریات گروه فنی و مهندسی-
استفاده از مدل سازی بزرگ مقیاس برای تحلیل سازه های آجری با ابعاد و اندازه ی بزرگ اجتناب ناپذیر است. در یک تحلیل دقیق بزرگ مقیاس سازه های آجری، ارائه ی مدلی که مشخصات مصالح برای تمامی وضعیت های تنش را به دقت برآورد کند، بسیار حائز اهمیت است، که به دلایلی مانند عدم وجود نتایج آزمایشگاهی گسترده و پیچیدگی ذاتی فرمول بندی ناهمسان گرد رفتار غیرکشسان، ارائه ی این مدل با مشکلاتی همراه است. تعداد پژوهشگرانی که موفق شده اند مدل های بزرگ مقیاس مناسبی برای تحلیل سازه های آجری ارائه دهند که در آن حالت کشسانی ناهمسان گرد با رفتار ناهمسان گرد غیرکشسان ترکیب شده باشد، بسیار اندک است. در این نوشتار، جزئیات به کارگیری مدل بزرگ مقیاس رانکین هیل، که برای پیشگیری از تکینه گی در به کارگیری منحنی های تنش کرنش معادل در کشش و فشار اصلاح شده است، با ارائه ی الگوریتم و برنامه ی روش حل سریع به منظور استفاده در تحلیل غیرخطی سازه های آجری تهیه و ارائه شده است.
کلید واژگان: دیوارهای آجری، تحلیل غیرخطی، مدل ناهمسان گرد، درشت، مدل، الگوریتم پیشنهادیIn order to analyze masonry structures with a large number of unit walls and joints, application of macro-modeling is compulsory for nonlinear analysis. An accurate nonlinear analysis of masonry structures from a macro-modeling perspective requires a material description for all stress states of behavior. Due to the lack of comprehensive experimental results corresponding to pre-peak and post-peak behavior, and the intrinsic complexity of formulating anisotropic in the inelastic behavior of masonry structures, there are special difficulties in the nonlinear analysis of such structural systems and/or components. The complex behavior of masonry is due to the effect of anisotropy, which arises from the geometrical arrangement of units and mortar; even the properties of these constituents are isotropic. The relatively complex yield surfaces proposed by many authors almost preclude the use of modern plasticity concepts and an accurate representation of inelastic behavior such as the hardening and softening rule. Only a few authors have tried to develop specific macro-models for the non-linear analysis of masonry structures, in which, anisotropic elasticity is combined with anisotropic inelastic behavior. In order to model such orthotropic material behavior, the standard multi-surface plasticity model was developed with Rankine yield criterion for tension and Hill yield criterion for compression, which was presented by Louren. The advantages of a combined yield surface, together with modern plasticity concepts, are strong representations of the behavior of anisotropic, which encompasses various softening/hardening behaviors parallel to the axis of the material. In this paper, formulation and implementation of the method used for the Rankine-Hill model are detailed in the plane-stress numerical code with two major promotions. In the first, the expedited method for nonlinear analysis in localized solutions (return-mapping algorithm) are described for this model, and in the second, for the prevention of numerical singularity, the equivalent stress-strain curvatures are modified using the exponential formulation in tension and compression states. Prototype models were studied for monitoring and verifying the numerical results of the software code with the experimental results of brick walls.
Keywords: Brick Walls, Nonlinear Analysis, Orthotropic Model, Macro, Model, Proposed Algorithm
- نتایج بر اساس تاریخ انتشار مرتب شدهاند.
- کلیدواژه مورد نظر شما تنها در فیلد کلیدواژگان مقالات جستجو شدهاست. به منظور حذف نتایج غیر مرتبط، جستجو تنها در مقالات مجلاتی انجام شده که با مجله ماخذ هم موضوع هستند.
- در صورتی که میخواهید جستجو را در همه موضوعات و با شرایط دیگر تکرار کنید به صفحه جستجوی پیشرفته مجلات مراجعه کنید.