به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
جستجوی مقالات مرتبط با کلیدواژه

routing algorithm

در نشریات گروه فنی و مهندسی
  • Farzaneh Kuhifayegh, Roozbeh Rajabi *
    Iris recognition is a widely used biometric technology in various applications. Deep learning methods, particularly convolutional neural networks (CNNs), have been popular in biometric detection due to their ability to generalize well and operate without human intervention. However, CNNs often struggle with image noise and require large datasets for effective training. To address these limitations, Capsule Networks (CapsuleNet) have been introduced, offering improved performance on small and noisy datasets. This paper presents a CapsuleNet architecture with an enhanced routing algorithm tailored for iris recognition. To further refine the learning process, VGG16 and InceptionV3 models are integrated into the CapsuleNet, enabling it to learn effectively from a limited number of samples. The proposed network is structured into a series of subnets, corresponding to its main building blocks. Experiments conducted on the CASIA-V4 Lamp iris dataset demonstrate that the optimized CapsuleNet architecture outperforms traditional networks, offering greater stability and robustness for iris recognitions. Results on the CASIA-V4 dataset show a 6% improvement in accuracy.
    Keywords: Iris Recognition, Biometric Identification, Deep Learning, Capsule Network (Capsulenet), Routing Algorithm
  • مرتضی محمودآبادی*، امیرعباس محسن دوست

    این مقاله یک رویکرد جدید برای تعیین کوتاه ترین مسیر بین دو نقطه در AUTOCADبا استفاده از Auto LISP به منظور کابل ریزی ارائه می کند. الگوریتم با تنظیم نقطه مبدا و مقصد مقداردهی اولیه می کند و از یک سری نقاط میانی برای تقریب مسیر بهینه استفاده می کند. این نقاط به طور مکرر از طریق به حداقل رساندن خطا اصلاح می شوند تا از دقت مسیر اطمینان حاصل شود. الگوریتم فاصله کل کوتاه ترین مسیر را محاسبه می کند و به صورت بصری آن را با خط قرمز نشان می -دهد. این روش به طور موثر محیط های پیچیده با موانع متعدد را مدیریت می کند و یک راه حل محاسباتی کارآمد برای مسیریابی درAUTOCAD ارائه می دهد.

    کلید واژگان: کوتاه ترین مسیر، نقاط ثانویه، کمینه سازی خطا، مسیر بهینه، موانع، الگوریتم مسیریابی
    Morteza Mahmoodabadi*, Amirabbas Mohsendoost

    This paper presents a new approach to determine the shortest path between two points in AUTOCAD using Auto LISP for cabling purposes. The algorithm is initialized by setting the origin and destination points and uses a series of intermediate points to approximate the optimal path. These points are iteratively refined through error minimization to ensure trajectory accuracy. The algorithm calculates the total distance of the shortest path and visually shows it with a red line. This method effectively handles complex environments with multiple obstacles and provides a computationally efficient solution for routing in AUTOCAD.

    Keywords: Shortest Path, Secondary Points, Error Minimization, Optimal Path, Obstacles, Routing Algorithm
  • میترا معلم نیا، هادی شهریار شاه حسینی

    شبکه های روی تراشه،یک بستر ارتباطی کارآمد را برای برقراری ارتباط بین تعداد بالای هسته پردازشی در تراشه های مدرن امروز فراهم می کنند. با این حال کاهش ابعاد ترانزیستورها سبب شده تا مصرف توان ایستا به یکی از مسایل مهم در این شبکه ها تبدیلگردد. معمولا از روش قطع تغذیه سیستم بر روی کانال های مجازی در زمان بیکاری شان برای کاهش توان مصرفی شبکه استفاده می شود؛ اما پراکندگی بار در سطح شبکه و عدم پیوستگی دوره بیکاری در کانال های مجازی باعث روشن و خاموش شدن متوالی این منابع می شود که سربار تاخیر و توان مصرفی را به دنبال دارد. این مسیله در شبکه های روی تراشه سه بعدی نیمه متصل که تعداد اتصالات عمودی شان محدود می باشد از اهمیت بیشتری برخوردار است. در این مقاله،یک الگوریتم مسیریابی برای شبکه های سه بعدی نیمه متصل ارایه می شود که با توزیع مناسب بسته ها، پراکندگی بار را در شبکه کاهش می دهد تا یک دوره بیکاری پیوسته در کانال های مجازی ایجاد کند. به این ترتیب می توان با بیشتر خاموش نگه داشتن آنها بهترین تاثیر را از روش قطع تغذیه سیستم در مدیریت توان مصرفی گرفت. این مسیریابی با تقسیم بندی شبکه به دو منطقه شمالی و جنوبی و ایجاد محدودیت در استفاده از آسانسورهای هر منطقه، سعی دارد که بسته ها را از مسیرهایی عبور دهد که اخیرا بیشتر استفاده شده اند تا دوره بیکاری را در منابع پرمصرف موجود در مسیرهای کم تردد افزایش دهد. نتایج شبیه سازی تحت شبیه سازBooksim نشان می دهند که مسیریابی پیشنهادی در مقایسه با مسیریابی های دیگر، توانسته 18% تا 30% بهبود در توان مصرفی شبکه ایجاد کند و عملکرد شبکه را نیز از نظر تاخیر تا 32% بهبود بخشد.

    کلید واژگان: شبکه روی تراشه، مسیریابی در شبکه، مدیریت انرژی، ارزیابی کارایی
    Mitra Moalemnia, Hadi Shahriar Shahhoseini

    Network-on-chip provides an efficient communication platform for Systems-on-chip. The static power consumption is an important issue in these networks. Switching the power supply on virtual channels during idle time is a common method for reducing the network power consumption. The traffic load at the network level and non-continuous idle period of virtual channel have caused the sources to be switched on and off continuously, which leads to increase in power consumption and other overheads. This will be more important, in partially connected 3D chip networks in which a limited number of vertical connections has been used. In this paper, a routing algorithm is proposed who employs an appropriate policy for packet distribution, and reduces the load distribution in the network and creates a continuous idle time for the resources, result in suitable power management in the network. In this routing scheme the network is divided to north and south region and some restriction applied in usage of elevators in each region and try to increase the utilization of the used resources as well as the ideal time of low traffic paths. The simulation results, derived by BookSim, show the proposed method improve the network power consumption by 18% to 30% comparing previous algorithms, and the network delay has been reduced by 32%.

    Keywords: Network-on-chip, routing algorithm, energy management, performance evaluation
  • Z. Shirmohammadi *, M. Mahmoudi, M. Rostamnezhad
    Background and Objectives
    Thermal problem is one of the main challenges in 3D on-chip networks. Inappropriate traffic distribution, poor heat dissipation, cooling restriction for layers away from the chip heatsink are the main reasons for this problem.
    Methods
    This paper proposes a new intelligent routing algorithm called (Int-TAR) to solve these problems. Int-TAR applies a routing for managing the heat in 3D on-chip networks dynamically. The main idea behind Int-TAR is to save the past states of the system and, according to these states, predict the future behavior of the network and perform routing dynamically. It is done by the threshold of routers dynamically based on the current status of the routers.
    Result
    The simulation results show that Int-TAR decreases the temperature of the network by 13% and improves performance efficiently.
    Conclusion
    The proposed idea shows the better benchmark for the thermal problem in 3D on-chip network. Also, the higher memory for storing the past state of the network can make accurate and the further performance for the network.
    Keywords: Reliability, Thermal, 3D NoC, Routing Algorithm
  • علیرضا محجوب، فاطمه وردی*، رویا راد

    شبکه روی تراشه یک زیرسیستم مبتنی بر مسیریاب است که با پیروی از پروتکل های ساده شده ای از شبکه ارتباطی داده های عمومی، مسیر حرکت یک بسته هنگام گذر از نقطه مبدا به سمت مقصد را به کمک الگوریتم های مسیریابی مشخص می کند. به دلیل ، مشکلات ارتباطی ناشی از خرابی عناصر در شبکه روی تراشه، مانند مسیریاب و پیوندهای معیوب، گاهی امکان ارسال بسته از منبع به مقصد غیر ممکن می شود. در اغلب موارد الگوریتم های تحمل پذیر خطا با به کارگیری معیارهایی محدود، مسیر قابل اطمینان را انتخاب می کنند. به همین منظور در این مقاله به واسطه راهکاری انطباقی، با آگاهی از وضعیت تراکم دریافتی از گره های مجاور و ترکیب آنها با طول مسیر با استفاده از یک تکنیک تصمیم گیری چندمعیاره، مسیری مطمین انتخاب می شود که با رتبه بندی مسیرهای مختلف بین گره های شبکه، با وقوع خرابی، مسیری قابل اطمینان و با ویژگی های کیفیت سرویس مشابه جایگزین گردد. استراتژی انتخاب مسیر در شبکه های روی تراشه برای شناسایی درگاه خروجی کمینه با به کارگیری راهکار تصمیم گیری چندمعیاره ویکور، در مقایسه با الگوریتم مسیریابی پیشین بهبود در تاخیر و گذردهی دارد. سربار سطح سخت افزار الگوریتم دارای هزینه پایین منطقی است که مقیاس پذیری را برای پیاده سازی های شبکه روی تراشه بزرگ حفظ می کند.

    کلید واژگان: : شبکه های روی تراشه، مسیریابی، تحمل پذیری خطا، مسیریابی انطباقی، قابلیت اطمینان
    Alireza Mahjoub, Fatemeh Vardi *, Roya Rad

    Network-on-chip is a router-based paradigm that determines the path of packet passing from the source to destination by a routing pattern through simplified protocols of the public data communication network. Sometimes, it is impossible to send packets from source to destination due to the communication problems caused by network elements in NoC such as routers and faulty links. In most cases, fault-tolerant algorithms select a reliable path using definite criteria. Therefore, in this paper, a reliable path is selected using a multi-criteria decision making technique through an adaptive approach according to the density status received from the adjacent nodes along with the path length so that when a failure occurs, a reliable path with similar QoS features is replaced by rating different paths among network nodes. The weight path selection strategy in NoCs to detect the minimal output port and multi-criteria decision making approach with VIKOR method has improvement over the basic routing algorithm in terms of delay and throughput. The algorithm hardware overhead has a reasonably low cost that maintains scalability for large scale On-Chip networks implementations.

    Keywords: Network on chip, routing algorithm, fault tolerance, adaptive approach, reliability
  • امین رضایی پناه*، موسی مجرد، غلامرضا احمدی، حامد نظری

    امروزه کنفرانس های ویدیویی یکی از پردرخواست ترین امکانات برای بیان ویژگی های آنلاین هستند. هدف الگوریتم های مسیریابی در کنفرانس های ویدیویی آنلاین، افزایش تعداد درخواست های پذیرفته شده با توجه به رضایت از کیفیت سرویس (QoS) است. اکثر پژوهش های انجام شده در این زمینه فقط بر مبنای پهنای باند تمرکز دارند و تحقیقات نسبتا کمی هر دو محدودیت پهنای باند و تاخیر را در نظر می گیرند. در این مقاله، ما یک الگوریتم مسیریابی جدید در بستر شبکه های MPLS با رویکرد قوانین فازی پیشنهاد می دهیم که هر دو محدودیت پهنای باند و تاخیر انتها به انتها (پهنای باند-تاخیر) را برای جستجو مسیرها در نظر می گیرد. سیستم فازی یک مدل پیش بینی بر مبنای قوانین وزندار فازی برای فیلترینگ درخواست هایی با منابع بالا می باشد. ترکیبی از مسیریابی سنتی و MPLS مکانیزم جا به جایی، مقیاس پذیری و عملکرد کلی شبکه را بهبود می بخشد. ما الگوریتم پیشنهادی را به عنوان الگوریتم مسیریابی پهنای باند و تاخیر فازی (FBDRA) نامگذاری می کنیم. FBDRA سعی در به تعویق انداختن درخواست هایی با پهنای باند بالا و حداکثر تاخیر انتها به انتها کم دارد. ما از نرم افزار متلب ورژن 2019 برای شبیه سازی بسیاری از سناریوهای مختلف استفاده خواهیم کرد و معیارهایی مانند تعداد درخواست های پذیرفته شده، میانگین طول مسیر، و توازن بار را اندازه گیری می کنیم. علاوه بر این، ما عملکرد FBDRA را در مقایسه با برخی از کارهای مرتبط پیشین نظیر MHA، WSP، MIRA، BCRA، MIRAD، BGDG، BGLC، SAMCRA و MDMF مقایسه می کنیم. نتایج شبیه سازی نشان می دهد که FBDRA بهترین عملکرد را برای کنفرانس های ویدیویی ارایه می دهد.

    کلید واژگان: الگوریتم مسیریابی، شبکه MLPS، کنفرانس ویدئویی، سیستم فازی، قوانین وزندار
    Amin Rezaeipanah*, Musa Mojarad, Gholamreza Ahmadi, Hamed Nazari

    Today, video conferencing is one of the most sought after features of the Internet. The purpose of routing algorithms in online video conferencing is to increase the number of requests accepted according to Quality of Service (QoS) satisfaction. Most research in this field focuses solely on bandwidth, and relatively few studies consider both bandwidth and delay constraints. In this paper, we propose a new routing algorithm in the context of MPLS networks with fuzzy rules approach that considers both bandwidth limitation and end-to-end delay (bandwidth-delay) for path searches. The fuzzy system is a fuzzy weighted prediction model for filtering high resource requests. A combination of traditional routing and MPLS improves the mobility mechanism, scalability and overall network performance. We name the proposed algorithm as Fuzzy Bandwidth and Delay Routing Algorithm (FBDRA). The FBDRA is attempting to delay requests with high bandwidth and maximum end-to-end delay. We will use Matlab R2017a to simulate many different scenarios and measure criteria such as the number of requests received, average route length, and load balancing. In addition, we compare the performance of FBDRA compared to some of the previous related work such as MHA, WSP, MIRA, BCRA, MIRAD, BGDG, BGLC, SAMCRA and MDMF. The simulation results show that the FBDRA provides the best performance for video conferencing.

    Keywords: Routing Algorithm, MLPS Network, Video Conferencing, Fuzzy System, Weighted Rules
  • Sadoon Azizi*, Hasibeh Naseri, Alireza Abdollahpouri

    To support high bisection bandwidth for communication intensive applications in the cloud computing environment, data center networks usually offer a wide variety of paths. However, optimal utilization of this facility has always been a critical challenge in a data center design. Flow-based mechanisms usually suffer from a collision between elephant flows; while, packet-based mechanisms encounter packet re-ordering phenomenon. Both of these challenges lead to severe performance degradation in a data center network. To address these problems, in this paper, we propose an efficient mechanism for the flow scheduling problem in cloud data center networks. The proposed mechanism, on one hand, makes decisions per flow, thus preventing the necessity for rearrangement of packets. On the other hand, thanks do SDN technology and utilizing bidirectional search algorithm, our proposed method is able to distribute elephant flows smoothly and with high speed across the entire network. Simulation results confirm the outperformance of our proposed method with the comparison of state-of-the-art algorithms under different traffic patterns.

    Keywords: Cloud Computing, Data Center Networks, Flow Scheduling, Routing Algorithm, Load Balancing, Bidirectional Search
  • Akram Reza *, Parisa Jolani, Midia Reshadi
    By increasing, the complexity of chips and the need to integrating more components into a chip has made network –on- chip known as an important infrastructure for network communications on the system, and is a good alternative to traditional ways and using the bus. By increasing the density of chips, the possibility of failure in the chip network increases and providing correction and fault tolerance methods is one of the principles of today's chip design. Faults may have undesirable effects on the correct system operation and system performance. In this paper the communication infrastructure failure has been considered as same as link and router failure and the fault tolerance low cost routing algorithm has been suggested base on local fault information By using quad neighbor fault information to avoid back tracking in routing in order to select possible minimal path to destination. In this article, we have suggested cost aware fault tolerance (CAFT) routing algorithm. Our contribution in this algorithm is minimum local fault information, minimum routing decision overhead by implementing routing logic base and determining shortest possible path. For deadlock freedom using an additional virtual channel along Y dimension and prohibiting certain routing turns. In order to evaluate the performance of our routing, we compared it with other fault tolerant routing in terms of average packet latency, throughput and power.
    Keywords: Network-on-Chip, Fault tolerance, Deadlock-free, routing algorithm, 2D-NOC, Adaptive routing
  • Negin Bagheri Renani, Elham Yaghoubi *
    Due to the increasing growth of processing cores in complex computational systems, all the connection converted bottleneck for all systems. With the protection of progressing and constructing complex photonic connection on chip, optical data transmission is the best choice for replacing with electrical interconnection for the reason of gathering connection with a high bandwidth and insertion loss on chip was mentioned. Optical routers play an important role in the Optical Network-on-Chip (ONoC), which are responsible for selecting the path between optical signal source and the destination. In recent years, silicon optical routers based on Micro-Ring Resonators (MRRs) and Mach-Zehnder Interferometers (MZIs) have been proposed. The design of optical switches is desirable by using of Mach-Zehnder Interferometer. This is while that Micro Ring Resonator Switches have low bandwidth, whereas Mach-Zehnder Interferometer switches have wide bandwidth inherently. Mach-Zehnder Interferometer switches are able to routing with high speed for data transmission with Nano second switching time. This is while, that MRR switches in compare to MZIs has the less power consumption and area consumption. On the other hand we can divide optical routers into parts, A. general router and B. specific- router, so that in specific routers, some of I/O paths for the reason of avoiding deadlock had be omitted. In continue, several kinds of optical router based on MZI and MRR along with researching a series of parameters was mentioned.
    Keywords: Optical Router, Micro Ring Resonator, Mach-Zehnder Interferometer, routing algorithm, Optical Network on Chip, waveguide crossing
  • Meisam Kamarei *, Ghasem Kamarei, Zohreh Shahsavari
    This paper proposes an efficient network architecture to improve energy consumption in Wireless Sensor Networks (WSN). The proposed architecture uses a mobile data collector to a partitioned network. The mobile data collector moves to center of each logical partition after each decision period. The mobile data collector must declare its new location by packet broadcasting to all sensor nodes. However, packet broadcasting leads to increase in the network congestion as well as the network energy consumption. In this regard, this paper proposes an efficient routing algorithm to control number of packets broadcasting. The proposed algorithm declares the mobile data collector new location to sensor nodes within a special area. Special area has been considered around of the mobile data collector. Therefore, the proposed routing algorithm does not permit packets reaching to this special area. Indeed, the proposed algorithm directs data toward the mobile data collector by boundary sensor nodes. In fact, the proposed algorithm considers sensor nodes within special area have more traffic and energy consumption than other sensor nodes. Simulation results that have been implemented in ns-2 show the proposed algorithm increases the network lifetime as well as the sensor nodes energy consumption balancing.
    Keywords: Energy Consumption Balancing, Mobile Data Collector, Routing Algorithm, Wireless Sensor Networks
  • B. Parhami
    Network dilation is a way of o ering system families, at a range of sizes and computational powers, which share an underlying communication architecture and routing algorithm. We consider indirect networks that connect processing nodes via intermediate switch nodes. In the simplest such indirect networks, there is a switching network of some regular topology, where each switch is connected to d other switches and to exactly one processing node. A variant, which we adopt here because it is more robust in the sense of not losing any processing capability to single-switch failures, is the use of 2-port processing nodes that connect to two neighboring switches. This alternate architecture also has the advantage of increasing the number of processing nodes from n to (d=2)n with a factorof- 2 increase in internode distances. A k-dilated version of the latter architecture replaces each processing node with a path network (linear array) of length k, thus growing the network size to k(d=2)n and also further increasing internode distances. In this paper, we study topological and performance attributes of such dilated network architectures, proving general theorems about worst-case and average internode distances and deriving the routing algorithm from that of the underlying switch network.
    Keywords: Communication, Graph theory, Interconnection network, Parallel processing, Routing algorithm, Symmetric network
  • M. Valinataj*
    Nowadays, faults and failures are increasing especially in complex systems such as Network-on-Chip (NoC) based Systems-on-a-Chip (SoC) due to the increasing susceptibility and decreasing feature sizes. On the other hand, fault-tolerant routing algorithms have an evident effect on tolerating permanent faults and improving the reliability of a NoC based system. This paper presents reliability and performance evaluation of two main kinds of fault-aware routing algorithms, deterministic and adaptive, used in NoC architectures. The investigated methods have a multi-level structure for faulttolerance and therefore, each level can be separately evaluated. To demonstrate the effectiveness of these methods, we propose an analytical approach for reliability assessment based on combinatorial reliability models to show the effect of fault-aware routing algorithms on overall NoC reliability. However, for performance evaluation, we conduct extensive simulations on different applications.
    Keywords: Network, on, Chip, Routing Algorithm, Reliability, Performance, Fault, Analytical Model
  • مهدی کریمیان محمدآبادی*، سید صادق فدایی
    شبکه های تمام نوری با مسیردهی به تفکیک طول موج شفاف جزو شبکه های نسل آینده هستند و با هزینه کم پهنای باند زیادی را تامین خواهند کرد. به خاطر عوامل تخریب سیگنال فیبرهای نوری و تجهیزات نوری شبکه، یک طرح مسیریابی که فقط عملکرد لایه شبکه را در نظر بگیرید، لزوما بهترین طرح مسیریابی نمی باشد چرا که ممکن است پس از در نظر گرفتن عملکرد لایه فیزیکی طرحی نامناسب و حتی بدترین طرح شود. به منظور فائق آمدن بر این محدودیت، در این مقاله پیشنهاد کرده ایم که در طرح مسیریابی باید هر دو عملکرد لایه شبکه و لایه فیزیکی را با هم در نظر گرفت تا بهترین طرح مسیریابی حاصل گردد. همچنین در طرح مسیریابی مساله ترمیم شبکه را نیز لحاظ کرده ایم.
    کلید واژگان: شبکه های با مسیردهی به تفکیک طول موج، طرح مسیریابی، عملکرد لایه شبکه، عملکرد لایه فیزیکی، الگوریتم مسیریابی
    Mehdi Karimian*, Seyed Sadegh Fadaei
    The all-optical transparent wavelength routed network is a promising candidate for the next-generation backbone network to provide large bandwidth at low cost. Due to transmission impairments, present in fibers and optical components, may significantly affect the quality of a lightpath, and, hence, in wavelength routed transparent optical networks, the best routing optimization, which is determined only by network-layer performance, might not be the best one or even worse after physical-layer performance taken into account. In order to overcome the above limitation, in this paper, we propose that routing optimizations should be evaluated from both network-layer performance and physical-layer performance and the best routing optimization should be chosen based on the overall performances, not just the network-layer performance. Also the network restoration has to be considered.
    Keywords: Transparent wavelength routed network, routing, network, layer performance, physical, layer performance, routing algorithm
  • Mehdi Karimiyan-Mohammadabadi, Mohammad Hasan Majed Samiei
    The all-optical transparent wavelength routed network is a promising candidate for the next-generation backbone network to provide large bandwidth at low cost. Due to transmission impairments, present in fibers and optical components, may significantly affect the quality of a lightpath, and, hence, in wavelength routed transparent optical networks, the best routing optimization, which is determined only by network-layer performance, might not be the best one or even worse after physical-layer performance taken into account. In order to overcome the above limitation, in this paper, we propose that routing optimizations should be evaluated from both network-layer performance and physical-layer performance and the best routing optimization should be chosen based on the overall performances, not just the network-layer performance.
    Keywords: Wavelength routed optical networks, routing optimization, network, layer performance, physical, layer performance, routing algorithm
نکته
  • نتایج بر اساس تاریخ انتشار مرتب شده‌اند.
  • کلیدواژه مورد نظر شما تنها در فیلد کلیدواژگان مقالات جستجو شده‌است. به منظور حذف نتایج غیر مرتبط، جستجو تنها در مقالات مجلاتی انجام شده که با مجله ماخذ هم موضوع هستند.
  • در صورتی که می‌خواهید جستجو را در همه موضوعات و با شرایط دیگر تکرار کنید به صفحه جستجوی پیشرفته مجلات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال