به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
جستجوی مقالات مرتبط با کلیدواژه

backward step flow

در نشریات گروه مکانیک
تکرار جستجوی کلیدواژه backward step flow در نشریات گروه فنی و مهندسی
تکرار جستجوی کلیدواژه backward step flow در مقالات مجلات علمی
  • عطیه فرخ، میراعلم مهدی*

    در این مقاله، جریان آشفته هوا شامل، نانوذرات مس در جریان پشت پله با استفاده از روش دینامیک سیالات محاسباتی (C F D) به روش اویلری لاگرانژی شبیه سازی می شود. این شبیه سازی به دوصورت دوبعدی و سه بعدی با استفاده از نرم افزارهای C F X و F L U E N T انجام و نتایج به دست آمده با یکدیگر و با نتایج تجربی گزارش شده در مطالعات پیشین به عنوان مثال مطالعه گریفزو مقایسه می گردد. در مدل سازی از کوپل دوراهه بین سیال پیوسته هوا و فاز گسسته نانوذرات استفاده و اثرات نیروهای برآی سافمن، گرادیان فشار و اثرات آشفتگی برروی نانوذرات لحاظ می شود. نتایج عددی حاصل از مدل های اویلری لاگرانژی و مدل تک فاز در حالت های پایا و گذرا نیز با یکدیگر مقایسه می گردد. مطابق نتایج حاصل، ماکزیمم خطا در روش تک فاز برابر با 25 درصد و در روش اویلری لاگرانژی برابر 19 درصد است. در ادامه، اثرات مدل آشفتگی بر حرکت ذرات و برحسب قطرهای مختلف 10، 20، 35، 50، 70، 100 و 200 میکرومتر و همچنین ترتیب جفت شدن بین فاز حامل پیوسته و فاز پراکنده مورد بررسی قرارمی گیرد. بررسی اثر قطر ذره بر مسیر حرکت و رفتار ذرات و مطالعه تاثیر عدد استوکس برحضور ذرات در گردابه ایجاد شده در پشت پله، بخش بعدی این پژوهش است. بررسی نتایج نشان می دهد که عدد استوکس و مدل آشفتگی تاثیر قابل ملاحظه ای بر حرکت ذرات پشت پله را دارند. ذراتی که دارای عدد استوکس کوچکتر از 2/1 (معادل قطر 35 میکرومتر در این مطالعه) باشند، حضور گردابه را حس کرده و وارد گردابه می شوند. از بین مدل های آشفتگی کمترین خطا برای مدل s s t برابر با 25/6 بیشترین خطا برای مدل $K\v a r e p s i l o n$ استاندارد برابر با 75/18 می باشد.

    کلید واژگان: نانوسیال، مدل آشفتگی، روش اویلری-لاگرانژی، جریان پشت پله، فلوئنت، سی اف ایکس
    A. Farrokh, Miralam Mehdi *

    Turbulent backward step flow, including air and copper nanoparticles, has been simulated using the Computational Fluid Dynamics (CFD) method by the Eulerian-Lagrangian method. The simulation was done using two- and three-dimensional methods with CFX and FLUENT software. The obtained results were compared with each other and with the experimental results. The two-way coupling discrete phase model (DPM) was used for simulation. The Saffman lift force, pressure gradient, and turbulence effects on nanoparticles are considered. Numerical results obtained with Eulerian-Lagrangian models and single-phase models in steady and transient have been compared with experimental data. The effect of the turbulence model on the trajectory of particles and in terms of different diameters of 10, 20, 30, 50, 70, 100, and 200 micrometers have been investigated. The effects of particle diameter on the trajectory and behavior of particles and the effect of Stokes number on the presence of particles in the vortex created behind the step have been investigated. The results have been presented as various contours and graphs for two- and three- dimensional, steady, and transient states. Particle trajectories are shown as contours for different Stokes numbers and particle diameters. The continuous phase velocity variation across the channel for different distances of step are presented as graphs. Standard, RNG, and Realizable k-e and standard and SST k-w models are considered for the modeling of turbulent flow. The results show that SST k-w is more accurate than the experimental data. Furthermore, simulation was done using CFX software. Variations of velocity profile are compared with experimental and Fluent data. The results show that the Stokes number and the turbulence model have a significant effect on the trajectory of particles. Three-dimensional modeling of the flow increases the accuracy of the results. The maximum error in the single-phase method is equal to 25% and for the Eulerian-Lagrangian method is equal to 19%. Particles with a Stokes number smaller than 1.2 (equivalent to a diameter of 35 micrometers in this study) sense the presence of the vortex and enter the vortex. Among the turbulence models, the lowest error for the sst model is equal to 6.25, and the highest error for the standard Kε model is equal to 18.75.

    Keywords: Nanofluid, Turbulence Model, Eulerian-Lagrangian Method, Backward Step Flow, FLUENT, Cfx
نکته
  • نتایج بر اساس تاریخ انتشار مرتب شده‌اند.
  • کلیدواژه مورد نظر شما تنها در فیلد کلیدواژگان مقالات جستجو شده‌است. به منظور حذف نتایج غیر مرتبط، جستجو تنها در مقالات مجلاتی انجام شده که با مجله ماخذ هم موضوع هستند.
  • در صورتی که می‌خواهید جستجو را در همه موضوعات و با شرایط دیگر تکرار کنید به صفحه جستجوی پیشرفته مجلات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال