به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
فهرست مطالب نویسنده:

abolfazl hoseinzadeh

  • ابوالفضل حسین زاده، لعیا جمالی راد*، هدایت الله امینیان، مهرداد صدقی

    هدف از این تحقیق، بررسی امکان تولید تخته خرده چوب هیبرید شده از خرده چوب صنعتی با ضایعات حاصل از هرس درختان انگور به عنوان یک ماده ضایعاتی که مصرف مشخصی نداشته و دورریز بوده، می باشد. برای این منظور، ذرات حاصل از ضایعات هرس انگور و خرده چوب صنعتی با نسبت های متفاوت 100:0، 70:30 و 40:60 مخلوط شدند. همچنین برای ساخت تخته ها دو سطح مختلف مصرف چسب اوره فرمالدهید شامل 10 و 12 درصد (براساس وزن خشک خرده چوب) و زمان پرس 5 دقیقه در نظر گرفته شد. خواص فیزیکی و مکانیکی تخته ها شامل واکشیدگی ضخامت، مقاومت خمشی، مدول الاستیسیته و چسبندگی داخلی اندازه گیری و سپس کلیه داده ها مورد تجزیه و تحلیل آماری قرار گرفت. نتایج حاصل از این پژوهش نشان داد که اگرچه افزایش ذرات حاصل از ضایعات هرس انگور منجر به کاهش ویژگی های تخته خرده چوب گردید، اما همه تخته ها حد استاندارد اروپا را دارند. از سوی دیگر افزایش میزان مصرف چسب نیز اثر منفی این ذرات را بر ویژگی های تخته تعدیل نموده و تاثیر مثبتی بر کلیه ویژگی های تخته ها داشت. لذا با مقایسه خواص تخته های تولید شده با استاندارد اروپایی (EN) مشخص گردید که با استفاده از 30 درصد ضایعات هرس انگور جایگزین شده با ذرات خرده چوب، می توان تخته خرده چوب با خواص مطلوب تولید نمود. نتایج کلی این بررسی نتیجه مثبتی در جهت استفاده از ضایعات حاصل از هرس درختان انگور به عنوان یک نوع پسماند باغی را نشان می دهد که پس از هرس دور ریز شده و برای جلوگیری از آلودگی های زیست محیطی ناشی از سوزاندن این ترکیبات، می تواند هم جایگزین بخشی از ماده چوبی در ساخت پانل های صنعتی گردد و هم درآمدی برای باغداران باشد.

    کلید واژگان: هرس درختان انگور، پانل های صنعتی، رزین اوره فرمالدهید، مقاومت خمشی
    Abolfazl Hoseinzadeh, Loya Jamalirad *, Hedayatollah Aminian, Mehrdad Sedghi

    The purpose of this research is to investigate the possibility of producing hybrid particleboard from industrial wood chips with waste from vine pruning as a waste material that has no specific use and is thrown away. For this purpose, the particles from grapevine pruning residue and industrial wood chips were mixed with different ratios of 0:100, 30:70 and 40:60. Also, for making boards, two different levels of urea-formaldehyde resin were used, including 10 and 12% (based on the dry weight of wood chips) and the pressing time was 5 minutes. The physical and mechanical properties of the boards including thickness swelling (TS), bending strength (MOR), modulus of elasticity (MOE) and internal bonding (IB) were measured and then all the data were analyzed statistically. The results of this research showed that although the increase of particles from grapevine pruning waste led to a decrease in the characteristics of particleboards, but all the boards meet the European standard. On the other hand, increasing the resin content moderates the negative effect of these particles on the characteristics of the board and had a positive effect on all the characteristics of the boards. Therefore, by comparing the properties of the boards produced with the European standard (EN), it was determined that by using 30% of grapevine pruning wastes replaced with wood chips, it is possible to produce particleboard with desirable properties. The general results of this study show a positive result in the direction of using the wastes from pruning grape trees as a type of garden waste that is rejected after pruning and can also replace part of wood material in the construction of industrial panels and also it will be an income for gardeners.

    Keywords: Grapevine pruning, Industrial panels, Urea formaldehyde resin, bending strength
  • Mohammad Reza Besharati, Abolfazl Hoseinzadeh, Pouria Yazdian-Anari *, Solmaz Ghorbani Aliabadi, Marzieh Vaghefi, Mehrdad Mansouri
    Introduction
    Multiple Sclerosis (MS) is the most common disabling neurological disease in young people. It is estimated that about 2 million people in the world suffer from this disease. Ocular involvement is one of the most prevalent clinical signs of MS. It is said that 25% of individuals suffer from vision problems during the development of disease. Therefore, this study was conducted in Yazd due to its climate changes and lack of study in this regard.
    Methods
    This study is a cross sectional type, conducted with the aim of studying the frequency of eye symptoms in MS patients referring to the Shahid Sadoughi Yazd ophthalmology Clinic from 2012 to 2014. The Sample size includes 150 patients who referred to the clinic. The tool for gathering information was a questionnaire. After gathering 150 samples, all the data was coded and entered into the computer. Results were analyzed by SPSS18, descriptive statistics, and Chi 2 test.
    Results
    The examined patients included 150 MS patients aged 33.48 years on average and with 28.43 years the onset age of disease examined. This study shows that blurred vision rate of 78.7% and the diplopia rate of 56% were the most prevalent vision complaints of patients from the starting the disease until examination. Optic atrophy with 14.7% and optic neuritis with 12% were the most common ocular findings in the examination.
    Conclusion
    We can conclude that vision disorders are the common consequences of MS. These disorders are accompanied by factors such as age, sex, residence, and family background. Therefore, it is necessary to take the patients’ demographic characteristics into account in their initial examinations.
    Keywords: Multiple Sclerosis, Blurred Vision, Diplopia
بدانید!
  • در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو می‌شود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشته‌های مختلف باشد.
  • همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته می‌توانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
  • در صورتی که می‌خواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال