به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
فهرست مطالب نویسنده:

h. babazadeh

  • حسین نوری حسن آبادی، محمدرضا کاویانپور*، امیر خسروجردی، حسین بابازاده

    استفاده از زبری پیوسته در بستر تنداب در شرایط برابر با روش های متداول استهلاک انرژی مانند حوضچه های آرامش، سرریزهای پلکانی، پرش اسکی و استقرار موانع در بستر تنداب می تواند روشی کارآمد برای افزایش استهلاک انرژی جریان در این سازه ها باشد. در این پژوهش تاثیر زبری بستر تنداب بر میزان استهلاک انرژی جنبشی جریان مورد بررسی قرار گرفته است. بدین منظور، رابطه عمومی بدون بعد توسعه داده شده و پس از واسنجی حل عددی با نتایج آزمایشگاهی، میزان استهلاک انرژی سازه در سه شیب 15، 22/5 و 30 درجه، با شش زبری 0/005، 0/0072، 0/0111، 0/016 و 0/022 متر و بدون زبری (شاهد) و سه دبی 0/07، 0/09 و 0/11 متر مکعب بر ثانیه، بررسی شد. بر اساس نتایج حاضر با ایجاد زبری ممتد در بستر تنداب، استهلاک انرژی افزایش می یابد. همچنین، با افزایش شیب تنداب، نسبت استهلاک انرژی در طول سرریز زبر به سرریز صاف افزایش می یابد. نتایج نشان داد که بیشترین مقدار استهلاک انرژی نسبی در حضور زبری، مربوط به شیب 22/5 درجه و برای زبری 22/2 میلی متر (85%) بوده و کمترین استهلاک انرژی نسبی نیز در حالت شاهد (25%) مشاهده شد. بنابراین، استفاده از بستر تنداب طبیعی بدون پوشش بتنی، از جنبه محیط زیست و قابلیت استهلاک انرژی، قابل توصیه است.

    کلید واژگان: سرریز شوت، حل عددی، استهلاک انرژی، بستر زبر
    H. Noury Hasanabady, M.R. Kavianpour*, A. Khosrojerdi, H. Babazadeh

    Using a rough bed for spillway compare to common dissipation methods such as stilling basins, stepped spillways, ski jumps, and bed elements may be more efficient to boost energy dissipation. In this research, the impact of spillway continuous bed roughness on energy dissipation was investigated. For this purpose, a non-dimensional relationship was developed, and by calibrating the numerical model based on the present experimental study, energy dissipation over the spillway for three slopes of 15, 22.5, and 30 (degree) with six roughness sizes of 0.0, 0.005, 0.0072, 0.0111, 0.016, and 0.022 (m) and three discharges of 170, 110, and 90 (lit/s) was investigated. Based on the present results, using a rough bed spillway will increase energy dissipation. Also, the ratio of energy lost per meter length of rough bed spillway to that of smooth spillway increases by chute slope. The results showed that the highest amount of relative energy consumption in the presence of roughness was related to the slope of 22.5 degrees and 22.2 mm for roughness (85%), and the lowest relative energy consumption was observed in the control state (25%). As a result of the present study, a natural rough bed without concrete coating has befitted in terms of environmental aspects, construction cost, and energy loss.

    Keywords: Chute spillway, Numerical model, Energy dissipation, Rough bed
  • Z. Kadkhoda, S.A.H. Tavakoli, H.Babazadeh, H. Aslroosta, N. Samiei
    Background

    The significance of attached gingiva for the maintenance of periodontal health has been a topic of interest.

    Objective

    This study aimed to compare the amniotic allograft with a free gingival graft (FGG) to improve the attached gingiva width (AGW) around the teeth.

    Materials and Methods

    In this randomized control clinical trial study, 14 out of 28 patients in need of an increase in their AGW, were randomly assigned to the test group and received the amniotic allograft, while the other half as the control group were treated with a palatal FGG. The mean AGW, graft shrinkage and color match were assessed at various intervals (1, 2, 6 and 12 weeks) following the operation and the photographs were taken at these follow-up sessions. The level of pain was evaluated based on visual analog scale (VAS).

    Results

    The AGW was not significantly different between the two groups in the 2, 6 and 12 weeks post-operatively (P=0.17, 0.73, 0.76 respectively). There was no significant difference in the amount of shrinkage between the two groups at different intervals (P=0.38, 0.57 and 0.52 respectively). The color match was superior (not significantly) in the amniotic allograft group in mentioned intervals (P=0.59, 0.31 and 0.18 respectively). All VAS pain scores in the test group were significantly lower than control group (P <0.05).

    Conclusion

    Application of the amniotic allograft could decrease the postoperative pain and discomfort, and effectively increase the AGW. Considering the disadvantages of FGG, the amniotic allograft can be considered as an alternative to FGG.

    Keywords: Attached Gingiva, Amniotic Membrane, Free Gingival Graft, Gingival Augmentation
  • علی کسری، امیر خسروجردی*، حسین بابازاده

    پژوهش حاضر با هدف محاسبه عدد کاویتاسیون دریچه تحتانی در آبگیر تحتانی سد نسا، به صورت مدل آزمایشگاهی و عددی طرح ریزی شده است. مقادیر فشار استاتیک در طول مدل دریچه تحتانی، توسط 22 پیزومتر تعبیه شده، اندازه گیری شد. برای مشخص کردن نقاط و مناطق با ریسک بالای کاویتاسیون، مقطع طولی دریچه تحتانی به سه بلوک تقسیم بندی شد. این تقسیم بندی براساس تاثیر پارامترهای هیدرولیکی موثر بر پدیده کاویتاسیون معرفی می شود. در بلوک شماره یک، نتایج محاسبه عدد کاویتاسیون نشان داد، این منطقه که در ابتدای جت خروجی سد را در بر می گیرد، سطح خطر، "امکان کاویتاسیون" را نشان می دهد. بررسی ها نشان داد، عدد کاویتاسیون در این منطقه وابسته به ارتفاع آب در کانال بالادست است. برای منطقه شماره دو، نتایج نشان داد، به ازای نسبت موقعیت درنظر گرفته شده به کل طول دریچه تحتانی و در محدود 0/44 و0/9 مقادیر کاویتاسیون، پارامتری از سرعت خروجی جت در دریچه تحتانی هستند. لازم به ذکر است، بررسی سطح خطر در مناطق دوم و سوم به ازای 0/44 = x/L، سطح خطر وابسته به فشار منفی در این مناطق است. همچنین مدل سازی عددی به ازای روش های مختلف مدل آشفتگی نشان داد که مدل آشفتگی K-ε RNG با مش ریز بهترین همخوانی را با نتایج مدل آزمایشگاهی دارد و مقادیر خطای آن به ازای مدل آزمایشگاهی و عددی محاسبه شد.

    کلید واژگان: کاویتاسیون، فشار استاتیک، دبی، دریچه تحتانی، سرعت
    A. Kasra, A. Khosrojerdi*, H. Babazadeh

    The objective of the present research was to investigate the flow properties through the bottom outlet of the Nesa dam based on numerical and experimental studies. 22 piezometers were employed to measure the static pressure through the experimental model. The bottom outlet section was divided into three blocks to measure the endangered region. The graph of cavitation numbers was plotted for different flow discharge and cavitation damage levels to compare with a safe zone to find out the areas with a high risk of cavitation. The results illustrate that block No. 1 cavitation index is located at the “possible cavitation” damage. The studies showed that the cavitation index is the dependent parameter with the height of the water at the upstream reservoir. Furthermore, for block No. 2, the level of cavitation ranged from x/L = 0.44 to 0.90 and the cavitation level is related to the velocity, and by increasing the velocity to 16 m/s, the threat of the cavitation and its consequences is raised, dramatically. Regarding block No.2 and 3, the cavitation through this block depends on the negative pressure since the negative values of the cavitation index is related to the negative static pressure and it is assumed that the negative pressure can reach the threat of major damage. Also, a comparison between different numerical turbulence models illustrates that the k-ε RNG with fine mesh showed less error with experimental values which causing the numerical model with this condition to reach an appropriate agreement between numerical and experimental simulations.

    Keywords: Cavitation Number, Static Pressure, Discharge, Bottom outlet, Velocity
  • طیبه خلیلی، مهدی سرائی تبریزی*، حسین بابازاده، هادی رمضانی اعتدالی

    مدیریت منابع آب در مناطق خشک و نیمه خشک به خصوص در بخش کشاورزی بسیار مهم می باشد. مطابق بیلان آب استان قم در حدود 90 درصد از منابع آب در این منطقه در بخش کشاورزی مصرف می گردد. در این مطالعه ردپای آب مجازی محصولات زراعی، دامی و نهاده های مصرفی در بخش کشاورزی به منظور کاهش فشار و حفظ منابع آبی موجود مورد تجزیه و تحلیل قرار گرفته است. در بخش زراعی با استفاده از نرم افزار NETWAT نیاز آبی گیاهان محاسبه و با استفاده از فرمول مکانن و هوکسترا که در سال 2010 ارایه شده است، ردپای آب مجازی محصولات زراعی در میانگین ده ساله محاسبه شد. نتایج نشان داد که به دلیل پایین بودن راندمان سامانه آبیاری حجم ردپای آب سفید که به تلفات آبیاری اشاره دارد در محصولات استان بسیار بالا تخمین زده شد، سهم ردپای آب سفید در محصولات جو، گندم، یونجه، پیاز، گوجه فرنگی، خربزه و ذرت به ترتیب برابر 55 درصد، 49 درصد، 48 درصد، 51 درصد، 46 درصد، 54 درصد و 5/37 درصد از سهم کل ردپای آب محاسبه شده است. همچنین ردپای آب سبز به دلیل کمبود میزان بارش در استان قم بسیار ناچیز برآورد شد. ردپای آب سبز در محصولات جو و گندم نسبت به سایر محصولات بیشتر بود که علت این امر همپوشانی فصل کشت و بارندگی بوده است، سهم ردپای آب سبز در محصول جو 12 درصد و در گندم برابر 11 درصد از سهم کل ردپای آب بود. در بخش دامی، ردپای آب در مشتقات دام و طیور با استفاده از روش هوکسترا و مکانن، 2010 محاسبه و با متوسط ردپای آب در کشورهای مختلف مقایسه شد. نتایج در بخش دامی نشان داد که ردپای آب مجازی در تولید گوشت قرمز و شیر به ترتیب 39 متر مکعب بر کیلوگرم و 42/2 متر مکعب بر لیتر تخمین زده شد. همچنین ردپای آب مجازی در گوشت مرغ و تخم مرغ به ترتیب 4/7 و 34/4 متر مکعب بر کیلوگرم محاسبه شد. در بخش نهاده های مصرفی، ردپای آب در کود (ازته، فسفاته، پتاسه و سایر کودها) برای اولین بار مورد توجه قرار گرفت. در بخش نهاده های مصرفی، ردپای آب مجازی در کود تولیدی برخی از محصولات با استفاده از اطلاعات پرسشنامه محاسبه شد. نتایج نشان می دهد که مجموع ردپای آب مجازی کود مصرفی برای تولید محصولات گندم، جو، پنبه و یونجه به ترتیب 62/2، 19/1، 07/1 و 54/2 متر مکعب بر کیلوگرم تخمین زده شد. سهم کودهای ازته در تولید محصول گندم، یونجه، پنبه و جو به ترتیب 54، 59، 68 و 60 درصد از سهم ردپای آب کل در کود مصرفی را تشکیل می دهد.

    کلید واژگان: آب مجازی، ردپای آب سبز، مدیریت منابع آب
    T. Khalili, M. Sarai Tabrizi *, H. Babazadeh, H. Ramezani Etedali
    Introduction

    Water resources management in arid and semi-arid regions is very important specially, in agricultural sector.  The major share of water use is daily consumption by humans for drinking, washing and cooking. Furthermore, population growth increases agricultural production demand, and this highlights the role of water resources management in the agricultural sector. The 1950’s studies showed 12 countries with a population of 20 million experienced water shortage. Virtual water is the volume of water which is consumed for a production from the beginning stage to the end. Scientists have shown that 96% of water footprints are related to crops, livestock and horticultural productions and only 4% it consumed as domestic water. Water balance data in Qom province shows that 90% of water resources are using in the agricultural sector. Investigation of water footprints in the agricultural sector is highly beneficial to improve water resources management in arid and semi-arid regions such as Qom.

    Materials and Methods

    The research was conducted to find out the production and cultivation water needs in the agricultural sector for 10 years, via calculating the gray, blue and green water footprints using Mekonnen and Hoekstra models. In the livestock sector, water footprint’s information such as the number of livestock and poultry, production of red meat, chicken meat, egg and milk were also determined using the Mekonnen and Hoekstra. The water footprint in fertilizer was calculated using a questionnaire survey. Excel and SAS apps were used to analyze the collected data for all three study sections.

    Results and Discussion

    The results showed that the water footprint in wheat, barley, cotton, onion, tomato, melon, watermelon, alfalfa, and corn were 3018, 2882, 10960, 1463, 1525, 960, 2504, 1683 and 416 m3/ton, respectively. The low irrigation efficiency led to a very high amount of white water footprint in the productions. Green water footprint was very low due to the lack of rainfall. In the livestock sector, the water footprint in red meat and milk were 39 m3/kg and 2.42 m3/lit, respectively which were much more than the global average. In the poultry sector, the water footprint in chicken meat and egg were 7.4 and 4.34 m3/kg, respectively, that were very high compared to the global average. The water footprint in fertilizer for wheat, barley, cotton and alfalfa productions were 2.62, 1.19, 1.07 and 2.54 m3/kg and this amount was higher under nitrogen fertilizer. The average virtual water footprint for chicken meat production in Qom province was 7.4 m3/kg. This amount in the world, USA, India, Russia, Mexico and the Netherlands is equal to 3.92, 2.39, 7.74, 5.76, 5.01 and 2.22 m3/kg respectively. In Netherlands, less water is in use in the agricultural sector than the other countries. In this country, the virtual water footprint in chicken meat is in the best position. India has the highest water consumption in poultry breeding with a consumption of 7.74 m3/kg. The average virtual water footprint in Iran for egg production is 4.34 m3/kg , while the average virtual water footprint for egg production in the world, USA, India, Russia, Mexico and the Netherlands is 3.34, 1.51, 7.53, 4.92, 4.28, and 1.4 m3/kg, respectively. India consumes the most water in the production of eggs such as chicken with a quantity of 7.53 m3/kg and the Netherlands has the least consumption with a value of 1.4 m3/kg .

    Conclusion

    The concept of virtual water footprint in each region reduces the pressure on water resources. For better management in agricultural regions, it is possible to prevent the cultivation of high water demand crops. The most common cause of high water footprint in livestock and poultry is nutrition, so, internationally food import can be a good solution. Industrialization of poultry can also reduce water footprint. The implementation of this research can be a useful clue to the sustainable control and management of water resources and achieving an optimal cultivation pattern in our country and all provinces facing limited water resources.

    Keywords: Green water footprint, virtual water, water resources management
  • سودابه خلیلیان، مهدی سرائی تبریزی*، حسین بابازاده، علی صارمی

    در پژوهش حاضر، توسعه مدل هیدرولوژیکی SWAT در بالادست سد زاینده رود برای ارزیابی جریان ورودی به این سد شده است. بر این اساس پس از وارد کردن اطلاعات هواشناسی و هیدرومتری منطقه، شبیه سازی رواناب انجام گرفت. ایستگاه های هیدرومتری قلعه شاهرخ با توجه به حجم بالای ورودی به سد زاینده رود به عنوان ایستگاه مبنا برای واسنجی و اعتبارسنجی در طول دوره آماری 1990 تا 2015 انتخاب شد. پس از شبیه سازی هیدرولوژیکی و صحت نتایج، پیش بینی وضعیت اقلیمی با استفاده از مدل پنجم تغییر اقلیم برای سناریوهای RCP انجام گرفت. طبق پیش بینی انجام گرفته با استفاده از مدل های تغییر اقلیم، در همه مدل ها میزان دما افزایش داشته و بیشترین میزان افزایش تحت سناریوی اقلیمی RCP 8.5 اتفاق خواهد افتاد. پس از ارزیابی تغییر اقلیم در سناریوهای مختلف انتشار، شبیه سازی میزان رواناب حوضه در مدل SWAT انجام گرفت. نتایج شبیه سازی میزان رواناب در حوضه آبریز نشان داد که اگر چه میزان بارش در منطقه افزایش داشته اما افزایش میزان دما اثر بیشتری داشته و باعث کاهش میزان رواناب در حوزه شده است. بر این اساس با استفاده از نتایج تغییر اقلیم شبیه سازی هیدرولوژیکی با استفاده از مدل SWAT انجام گرفت. نتایج تغییر اقلیم نشان داد که اثر سناریوهای انتشار در منطقه متفاوت بوده و باعث افزایش دما و بارش می شوند. بیشترین میزان افزایش در سناریوی RCP8.5 مشاهده شد که با ذات این سناریوی انتشار که بیشترین میزان انتشار گازهای گلخانه ای و دی اکسیدکربن است نیز مطابقت داشت. سپس ارزیابی مدل هیدرولوژیکی انجام و نتایج نشان داد که اگرچه میزان بارش در منطقه افزایش داشته است اما افزایش دما در این حوضه اثر و کارایی بیشتری در کاهش میزان رواناب داشته است.

    کلید واژگان: بیلان آب، زاینده رود، LARS-WG، SWAT
    S. Khalilian, M. Sarai Tabrizi*, H. Babazadeh, A. Saremi

    In the present study, the SWAT hydrological model was developed for the upstream of the Zayandehrood dam to evaluate the inflow to this dam. Accordingly, after entering the meteorological and hydrometric information of the region, the runoff simulation was performed. Due to the high volume of entrances to the Zayandehrood Dam, Shahrokh Castle hydrometric stations were selected as the base station for calibration and validation during the statistical period of 1990-2015. After hydrological simulation and accuracy of results, climate prediction was performed using the fifth model of the climate change for the RCP scenarios. According to the forecast, by using climate change models, the temperature could be assumed to increase in all models and the highest rate of increase would occur under the RCP 8.5 climate scenario. After evaluating climate change in different diffusion scenarios, the runoff of the basin was simulated in the SWAT model. The simulation results of runoff in the catchment area showed that although the amount of rainfall was increased in the region, increasing the temperature had a greater effect, reducing the amount of runoff in the basin. Based on the results of climate change, hydrological simulation was performed using the SWAT model. The results showed that the effect of diffusion scenarios in the region was different, causing an increase in temperature and precipitation. The highest increase was observed in the RCP8.5 scenario, which was consistent with the nature of this emission scenario, with the highest emission of greenhouse gases and carbon dioxide. Then, the evaluation of the hydrological model was done; the results showed that although the amount of rainfall in the region had been increased, the increase in temperature of this basin had a greater effect and efficiency in reducing the amount of runoff.

    Keywords: LARS-WG, Zayandeh Rood, SWAT, Water Balance
  • فهیمه شیرشاهی، حسین بابازاده *، نیازعلی ابراهیمی پا ک، محمدرضا خالدیان

    طراحی و اجرای الگوی کشت مناسب به منظور کنترل هر چه بیشتر عوامل محدود کننده و بهره برداری بهینه از منابع آب ضروری است. در این مطالعه بهینه سازی الگوی کشت در شبکه آبیاری و زهکشی قزوین در پنج سطح آبیاری شامل I1، I2، I3، I4 و I5 (به ترتیب تخصیص آب 100، 90، 80، 70 و 65 درصد نیاز آبی گیاه) و سه سطح مختلف کشت شامل S1، S2 و S3 (به ترتیب برابر سطح کشت موجود، 10 درصد افزایش سطح زیر کشت و 10 درصد کاهش سطح زیر کشت نسبت به شرایط موجود) انجام گرفت. مقادیر سطح زیر کشت و میزان آب تخصیصی برای گیاهان با استفاده از مدل برنامه ریزی خطی بهینه شد و تابع هدف، حداکثرسازی سود بود.  نتایج بهینه سازی نشان داد که در حالت S2 بیشترین سطح مربوط به گیاهان استراتژیک و در حالت S3 بیشترین سطح به گیاهان با سود بالاتر اختصاص یافت. در حالت S3I1 حداکثر درآمد کل (315 میلیون ریال) در میان تمامی سناریوها را داشت. اختصاص آب در سطح I2ضمن حفظ درآمد، بهره وری اقتصادی را در سطوح مختلف به طور متوسط 82/0 میلیون ریال در مترمکعب آب افزایش داده است.  لذا می توان با مصرف آب کم تر و اختصاص سطح زیر کشت کم تر درآمد بیشتری داشت. همچنین تخصیص آب I4 و I5 با توجه به کاهش درآمد و عملکرد توصیه نمی شود. مدل در شرایط کم آبی سطح زیر کشت گیاهان آب بر مثل گوجه، چغندر و یونجه را محدود کرد.

    کلید واژگان: برنامه ریزی خطی، بهره وری اقتصادی، تحلیل سلسله مراتبی، تخصیص آب، چغندرقند
    F. Shirshahi, H .Babazadeh*, N .A. Ebrahimi Pak, M. R. Khaledian

    Designing and implementing suitable cropping patterns are necessary to control the limiting factors and optimal utilization of available water resources. In the present study, cropping pattern optimization in Qazvin irrigation and drainage district has conducted considering the five levels of irrigation including I1, I2, I3, I4, and I5 (representing water allocation of 100, 90, 80, 70, and 65 percents of the crop evapotranspiration) and three different levels of cultivated areas including S1, S2, and S3 (representing, current cultivated area, 10 percents increase and 10 percents decrease in the crop cultivated area compared to the current conditions). Crops cultivation areas and water allocation were optimized using a linear programming method and the objective function was to maximize the benefit. The results indicated that the model in condition S2 allocated the most cultivation area to strategic crops and in condition S3 allocated the most cultivation area to economic crops. The condition S3I1 had the highest income (315 million rials) among the all scenarios. Water allocation alternative named I2, increased the economic productivity by average 0.82 million rials per cubic meter of water at all the cultivation area alternatives while maintaining income. Therefore, it was possible to allocate less cultivation area and a lower amount of water while earning more income. Also,  water allocation alternatives named I4 and I5 were not recommended due to reduced income and yield. Model had a limited cultivation area of water-consuming crops such as tomato, sugar beet, and the alfalfa under water shortage condition.

    Keywords: Analytic Hierarchy Process, Productivity, Linear programming, Sugar beet, Economic, Water allocation
  • حسن ابراهیمی راد، حسین بابازاده*، مجتبی رضایی، ابراهیم امیری

    افزایش جمعیت و کاهش منابع آب منجر به کاهش روز افزون ذخایر آب و نهایتا کاهش سهم بخش کشاورزی شده است لذا محققین در شرایط کنونی ناگزیر به یافتن راه حل های نو برای استفاده از آب با کیفیت پایین در کشاورزی شده اند. این پژوهش به منظور بررسی امکان کاربرد آب شور در کشت برنج هاشمی، تخمین عملکرد برنج با استفاده از تابع تولید و یافتن بهترین زمان کاربرد این آب ها، در سال 1389 در موسسه تحقیقات برنج به اجرا درآمد. طرح به صورت کشت گلدانی زیر سایه بان متحرک با آرایش فاکتوریل در قالب طرح بلوک های کامل تصادفی به صورت 4 سطح شوری آب آبیاری 2، 4، 6 و 8 دسی زیمنس بر متر و مراحل مختلف رشد نظیر پنجه زنی، تشکیل خوشه، ظهور خوشه و رسیدگی به کاربرده شد. شوری ها با استفاده از سولفات کلسیم (CaSO4) و سنگ نمک معدنی خالص با نسبت (2:1) تهیه شد. نتایج نشان داد که تاثیر سطوح مختلف شوری و هم چنین مراحل مختلف رشد بر عملکرد دانه در سطح یک درصد معنی دار بود. سطوح شوری اعمال شده منجر به کاهش عملکرد، به ترتیب 21، 25، 37 و 47 درصد شد. مرحله تشکیل خوشه و دوره پنجه زنی با عملکرد معادل 92/1 و 41/2 تن در هکتار حساس ترین مرحله به شوری بودند. بین میزان عملکرد و صفات وزن خوشه، وزن هزار دانه و طول خوشه همبستگی مثبت ولی با صفت درصد پوکی همبستگی منفی وجود داشت. بر اساس نتایج به نظر می رسد با استفاده از صفات وزن خوشه، درصد پوکی و تعداد پنجه می توان معادله عملکرد برنج را تحت شرایط شوری در دوره های مختلف رشد پیش بینی نمود.

    کلید واژگان: برنج، تابع تولید، شوری، عملکرد، مراحل رشد
    H. Ebrahimi Rad, H. Babazadeh*, M. Rezaei, E. Amiri

    Population growth and decreases water availability led to decreases water resources and consequently decreasing in the water portion of agricultural sector .So researchers in this condition have to find new solutions for utilization of low quality water in agriculture .This research was performed in order to assess the possibility of saline water use in Hashemi rice production¡ Rice yield estimation using production function and Find the best time to use these waters in Rice Research Institute during 2010 crop season .Plan was in pot cultivation under shelter with factorial arrangement in a randomized complete block design in 4 levels of water salinity i.e. 2¡ 4¡ 6¡ and 8 dsm 1-that were applied at 4 different growth stages i.e .tillering ¡panicle forming¡ heading and ripening . Saline water was made by using NaCl CaSO4 (2:1). Results showed that the effect of different levels of salinity and different growth stages on yield was significant. Applied salinity levels¡ respectively represented 21¡25¡ 37 and 47 percent yield losses .The panicle formation and tillering stages with 1.92 and 2.41 T5on per Hectare of yield were the most sensitive stages to salinity. There was positive correlation between Grain yield and Panicle weight¡ 1000-grain weight and panicle length but negatively correlated with the Percentage of emptiness per panicle .According to results it is possible to predict rice production function under conditions of salinity at different growth stages using Panicle weight¡ Percentage of emptiness and number of tillers¡ can predicted.

    Keywords: Process of growth, Production function, Rice, Salinity
سامانه نویسندگان
  • دکتر حسین بابازاده
    دکتر حسین بابازاده
    استاد گروه علوم و مهندسی آب، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران
اطلاعات نویسنده(گان) توسط ایشان ثبت و تکمیل شده‌است. برای مشاهده مشخصات و فهرست همه مطالب، صفحه رزومه ایشان را ببینید.
بدانید!
  • در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو می‌شود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشته‌های مختلف باشد.
  • همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته می‌توانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
  • در صورتی که می‌خواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال