m. b. fathi
-
در ارتقاء آشکارسازهای کارامد برای آشکارسازی اشعه ایکس در تصویربرداری، تفکیک انرژی و اتلاف زمانی و هزینه ساخت از جمله ویژگی هایی است که ما را به طراحی آشکارساز نیمه هادی سوق می دهد. دیود با بهره داخلی کم (LGAD) با داشتن تقویت کنندگی داخلی این امکان را می دهد که در میدان کافی، فرایند تکثیر داخلی را با شتاب دادن به حامل ها، انرژی لازم برای یونیزاسیون و تولید حامل های ثانویه برای تولید بهره بهتر (نسبت سیگنال به نویز بیش تر) و هم چنین بازده زمانی بیش تر (در محدوده نانوثانیه) فراهم کند. در این مقاله، آشکارساز سیلیکونی LGAD را با نرم افزار سیلواکو با اعمال ولتاژ بایاس معکوس و تابش در محدوده نور مریی تا اشعه ایکس شبیه سازی کردیم. در این شبیه سازی، روش نیوتن و گامل به کار رفت؛ در روش نیوتن، یکی از سازوکارهای برهم کنش اشعه با ماده را متغیر و باقی آن ها را ثابت در نظر می گیرند ولی در روش گامل، تمامی سازوکارها به طور هم زمان حل می شود. در بازه طول موج در محدوده اشعه ایکس، جریان الکترونی در این آشکارساز از مرتبه 4-10 آمپر است و با افزایش انرژی این جریان کاهش می یابد. جریان تاریک از مرتبه 6-10 آمپر است. با اعمال نور مریی با طول موج 0/45 میکرومتر و شدت 1V/cm2، جریان آشکارساز در حدود 4-10×6/5 آمپر به دست آمد. به ازای طول موج اشعه ایکس 5-10×1/0 میکرومتر و شدت 108V/cm2، جریان آشکارساز 4-10×3/5 آمپر به دست آمد. با توجه به زمان پاسخ سریع این آشکارساز و جریان در محدوده میکروآمپر، آشکارساز مزبور گزینه مناسبی برای آشکارسازی اشعه ایکس است. هم چنین این آشکارساز عملکرد خوبی در محدوده نور مریی نشان می دهد.
کلید واژگان: اشعه ایکس، تصویربرداری، آشکارساز، حسگر کم بهره بهمنیX-ray applications in imaging and beyond require efficient and optimal detectors. Energy separation, time loss, and manufacturing cost are among the features that led us to design a semiconductor detector. A low-gain avalanche diode (LGAD) with internal amplification allows, in a sufficient field, the internal propagation process by accelerating the carriers, the energy required for ionization, and the generation of secondary carriers to produce a better gain (higher signal-to-noise ratio) and also provide more time efficiency (in the range of nanoseconds). In this article, we simulate the LGAD silicon detector with Silvaco software by applying reverse bias voltage and radiation in the range of visible light to X-ray. Newton and Gummel's methods were used. In Newton's method, one of the mechanisms of radiation interaction with matter is considered variable and the rest are fixed. However, in Gummel's method, all mechanisms are solved simultaneously. In the X-ray wavelength range, the electron current in this detector is 10-4 amperes, and this current decreases with increasing energy. The dark current is 10-6 amperes. By applying visible light with 0.45-micrometer wavelength and 1 V/cm2 intensity, the detector current was obtained about 6.5×10-4 amperes. For 1.0×10-5 x-ray wavelength and 108 V/cm2 intensity, detector current was obtained about 3.5×10-4 amperes. Considering the quick response time of this detector and the current in the range of microamps, this detector is a suitable option for X-ray detection. Also, this detector shows superior performance in the visible light range.
Keywords: X-Ray, Radiography, detector, Low gain avalanche sensor -
Scientia Iranica, Volume:29 Issue: 3, May & Jun 2022, PP 1319 -1329The UV-Vis absorption spectra of the discrete magnetic molecules [py.H]3[FeBr4]2Br were calculated based on density functional theory with B3LYP exchange-correlation functional in acetonitrile solution. The molecule was dissolved dilutely in acetonitrile to ensure that its experimental response can be attributed to a single dispersed molecule without significant interaction to other molecules. The experimental UV-Vis absorption spectra show four typical peaks in UV region and three peaks in visible region. A number of different basis sets are employed to compare the experimental data with the theoretical absorption spectra on different levels of basis sets. The comparison of experimental data with theoretical computation shows that choosing 6-311++G** improves computational results mainly in visible region and makes little differences between results based on DFT and TDDFT in other wavelength domains, especially in UV wavelengths. The simulated results are of importance in simulating the response of these molecular magnets as a discrete asymmetric unit to applied light.Keywords: Molecular magnet, DFT, TDDFT, UV-Vis absorption spectra
-
برنامه ریزی تولید در روش تخریب بلوکی، مقدار تناژ استخراجی از هر دهانه تخلیه تا مقصد مشخص (کارخانه فرآوری) در هر دوره زمانی با اهداف برنامه ریزی را بیان می کند. یکی از مشکلات در برنامه ریزی تخریب بلوکی فقدان یکپارچگی پارامترهای اصلی طراحی است، بنابراین نیاز است مدلی توسعه یابد تا با استفاده از تمام عوامل موثر در تنظیم برنامه راهبردی معدن، زمان بندی تولید دقیق را ارایه کند. در این تحقیق مدل برنامه ریزی خطی عدد صحیح مختلط (MILP) به نحوی گسترش یافته است که تولید در روش تخریب بلوکی با توجه به محدودیت های عیار کارخانه فرآوری بررسی شود. محدودیت های حداقل و حداکثر عیار قابل قبول کارخانه فرآوری و همچنین محدودیت تولید عیار نسبی توسعه یافته در این تحقیق برنامه ریزی معدن را به سمتی سوق می دهد تا فرآیند استخراج واقعی به همراه کنترل ترقیق شدگی از دهانه های تخلیه انجام شود. نرم افزار CPLEX به عنوان چارچوب اجرای مدل MILP و نرم افزار MATLAB به عنوان زبان برنامه نویسی این تحقیق استفاده شده اند. نتایج اجرای مدل پیشنهادی بر روی 85 دهانه تخلیه که در طی 10 سال برنامه ریزی شده است نشان داد با اعمال محدودیت عیار کارخانه فرآوری به مدل MILP نسبت به حالتی که این محدودیت ها در مدل نباشند، فقط با کاهش 9% ازNPV محاسبه شده، عدم توزیع متناسب از متوسط عیار استخراجی بدون محدودیت کارخانه فرآوری 24% از حداکثر عیار دهانه های تخلیه است و با وجود محدودیت کارخانه فرآوری چنین توزیعی به 4% کاهش می یابد. همچنین تولید از معدن بر حسب عیار مجاز کارخانه فرآوری به خوبی رعایت شده است، بنابراین اعمال محدودیت های عیار کارخانه فرآوری به همراه سایر محدودیت های موثر در برنامه ریزی تولید، زمان بندی واقعی تری را ارایه کرده است.
کلید واژگان: محدودیت حداقل و حداکثر عیار کارخانه فراوری، محدودیت تولید عیار نسبی، برنامه ریزی تولید، MILPProduction planning defines the drawpoint extraction percentage in order to a deterministic destination (processing factory) according to scheduling objectives. One of the main problems in such planning is related to the lack of integration designing factors. So, there is a need to develop a model for mine scheduling using all factors influencing the strategic plan. In the current study, the Mixed Integer Linear Programming (MILP) has been developed according to metallurgical constraints. The maximum and minimum cut of grade as well as relative grade constraints are used to produce a real production from drawpoints according to the dilution control. The CPLEX software is used as a MILP solving framework, and also MATLAB to develop mathematical models. The application of the models based on metallurgical constraints was validated using 85 drawpoints over 12 periods. The results showed that in usual condition, the reduction of NPV was only 9% with the proportional non-distribution of average grade 24% of the maximum grade in the drawpoints, while by applying the metallurgical constraint this was reduced to 4%. Finally applying the metallurgical constraints with other operational constraints presented the real production planning.
Keywords: Maximum, minimum grade constraint, Relative grade constraint, Production Planning, MILP -
امروزه توانایی تولید بزرگ مقیاسو میزان بالا در معادن تخریب بلوکی منجر به توجه بیشتر در بهینه سازی عملیات استخراج این معادن شده است. تخریب یکنواخت این معادن به معنای هم زمان بودن شروع تخریب از تمام بلوک ها نیست. در گسترش تخریب ایمن که با کنترل راستای پیشروی تخریب همراه است، باید دوره زمانی شروع به فعالیت هر بلوک مشخص و سپس بر مبنای برنامه ریزی تولید، آهنگ های تخریب کل معدن تعیین شود. در مسایل برنامه ریزی تولید تخریب بلوکی یکی از مهم ترین محدودیت ها کنترل راستای پیشروی تخریب است. در کنترل این راستا عامل بحرانی مساله برنامه ریزی تولید، اولویت بندی بین بلوک ها در شروع فرآیند تخریب با توجه به موقعیت مکانی هر بلوک است. هدف اصلی این تحقیق تعیین تقدم بندی بین بلوک ها با توجه به راستای پیشروی است. این مقاله سعی دارد تا رویکردی ابتکاری با استفاده از نرم افزار متلب ارایه کند تا وابستگی به محاسبات زمان بر و سلیقه ای طراحان در تقدم بندی شروع فعالیت بلوک ها حذف شود. در این رویکرد با وارد کردن هر راستای پیشروی تخریبی، نظم و ترتیب زمانی استخراج بین بلوک ها محاسبه شده و در نهایت خروجی آن به عنوان یک محدودیت اصلی در مسایل زمان بندی تولید استفاده می شود. در بررسی مدل پیشنهادی، 98 بلوک از معدن نورثپارک برای 12 دوره زمانی از عمر معدن مورد ارزیابی قرار گرفت. نتایج اجرای مدل پیشنهادی در دو راستای غرب- شرق و جنوب- شمال نشان داد که بلوک های واقع در نقاط شروع راستای تخریب، در دوران اول و با پیشروی به نقاط واقع در انتهای راستای تخریب، بلوک ها در اواخر عمر معدن وارد فرآیند تخریب می شوند.کلید واژگان: تخریب بلوکی، کنترل راستای پیشروی تخریب، دوره زمانی شروع تخریب، نرم افزار متلبMass production and the high rate of block caving have caused to special considerations in operational optimization of these mines. In caving mines, the uniform extraction not means as equal extraction from blocks. In the uniform caving, controlling of caving propagation is one of the most critical factors in the stability of caving mines. Selection of advancement direction is one of the most important constraints in block caving and in the advancement direction controlling one of the critical aspects related to blocks precedency. So the goal of this research is to determine block precedence according to caving direction. It is crucial to control and validate the advancement direction to reach an optimum scheduling program. In this paper, an innovative approach is presented to control and predict the best advancement direction. MATLAB software is the framework of the presented model. The designer can find the desired direction by introducing a start and end points for caving propagation. Finally, its output can be used as input to scheduling programs of caving mines. Application and comparison of the model based on the advancement direction algorithms are validated using 98 using over 12 periods. The results show that the presented model respected to advancement direction and the model size is an accepted range for production planning problems.Keywords: Caving mines, Caving advancement direction, Caving start period, MATLAB
- در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو میشود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشتههای مختلف باشد.
- همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته میتوانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
- در صورتی که میخواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.