به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
فهرست مطالب نویسنده:

mohammadjavad abghary

  • محمدجواد عبقری، مهدی حسن زاده*

    در این پژوهش خواص فیزیکی و راحتی پارچه های پنبه ای و پلی استری تکمیل شده با استفاده از ذرات معدنی مسکوویت مورد بررسی و ارزیابی قرار گرفت. برای این منظور ابتدا میکروذرات مسکوویت در محلول کیتوسان پخش شد و در ادامه روی پارچه تاری پودی پنبه ای و پارچه حلقوی پلی استری پوشش داده شد. تاثیر حضور و درصد ذرات مسکوویت روی خواص ریخت شناسی و شیمیایی پارچه های عمل شده مورد مطالعه و بررسی قرار گرفت. برای این منظور از میکروسکوپ الکترونی روبشی و طیف سنجی مادون قرمز تبدیل فوریه استفاده شد. مطالعه ریخت شناسی پارچه های عمل شده نشان دهنده قرارگیری ذرات مسکویت در فضای بین الیاف و همچنین روی سطح الیاف پارچه های مورد بررسی می باشد. به منظور بررسی خواص سطحی و عملکرد راحتی منسوج، از آزمون های زاویه تماس و لغزش آب و نفوذپذیری هوا استفاده شد. همچنین بررسی زیردست و راحتی منسوج نیز با استفاده از آزمون های طول خمش و زاویه بازگشت پذیری از چروک انجام شد. نتایج بدست آمده حاکی از آن است که افزودن ذرات مسکوویت بر پارچه پلی استری سبب افزایش خاصیت آبدوستی شده و تاثیر چندانی بر میزان نفوذپذیری هوا، زیر دست و چروک پذیری آن نداشته است. این درحالیست که در پارچه پنبه ای عمل شده، زاویه لغزش آب به میزان 66 درصد کاهش یافته و سطح پارچه آبگریز شده است (زاویه تماس º104). همچنین از نفوذپذیری هوا به میزان 30 درصد کاسته شده و عملکرد راحتی منسوج نیز تحت تاثیر قرار گرفته است. تحلیل های آماری داده های بدست آمده از آزمون های فوق بیانگر معنی دار بودن داده ها در سطح اطمینان 95 درصد بوده است.

    کلید واژگان: مسکوویت، پارچه، کیتوسان، خواص عملکرد راحتی، تحلیل آماری
    MohammadJavad Abghary, Mahdi Hasanzadeh *

    In this research, the physical and comfort properties of cotton and polyester fabrics treated with muscovite minerals were investigated. First, muscovite microparticles were dispersed in a chitosan solution and then the muscovite suspension was coated on plain cotton and knitted polyester fabrics. The effect of the presence and content value of muscovite particles on the morphological and chemical properties of processed fabrics was studied. For this purpose, scanning electron microscopy and Fourier transform infrared spectroscopy were used. The morphological study of treated fabrics shows the presence of muscovite particles in the space between the fibers and also on the surface of the fibers of the investigated fabrics. To evaluate the surface properties and comfort performance of the fabrics, the water contact angle, sliding angle, and air permeability tests were carried out. Also, the softness and comfort of the fabrics were investigated using bending length and wrinkle recovery angle analysis. The obtained results indicate that the addition of muscovite particles to the polyester fabric increased the hydrophilic property and did not have much effect on the air permeability, handling properties, and wrinkle resistance. While in the case of cotton fabric, the sliding angle of water is reduced by 66% and the surface of the fabric becomes hydrophobic. The air permeability has also been reduced by 30% and the comfort performance of the textile has also been affected. The statistical analysis of the data obtained from the above tests indicated the significance of the data at the confidence level of 95%.

    Keywords: Muscovite, fabric, comfort performance properties, statistical analysis
  • مژگان صالح آبادی، محمدجواد عبقری*، احسان زرین آبادی

    امروزه کوشش هایی مبنی بر بهبود بخشیدن به خواص مثبت و همچنین کاهش خواص منفی الیاف مختلف صورت گرفته است. در این میان الیاف پلی استر در برابر تمام برتری ها و خواص مطلوبی که دارند، مقاومت حرارتی پایین آن ها باعث محدودیت کاربردشان در صنایع مختلف شده است. چراکه مقاومت حرارتی یکی از مباحث بسیار مهم در علوم مهندسی است. در اغلب موارد لازم است این الیاف با روش هایی اصلاح گردند که موضوعی بسیار گسترده است و اصلاحات فیزیکی و شیمیایی پلیمر و الیاف را شامل می شود. از اینرو در این پژوهش سعی گردیده است، بهبود مقاومت حرارتی این الیاف مورد ارزیابی قرار گیرد. برای این منظور با فیلرزدن نانو ذره ماده معدنی مسکوویت در عملیات ذوب ریسی به چیپس پلی استر، بهبود خواص حرارتی الیاف مورد بررسی قرار گرفت. برای کاهش اندازه ذرات مسکوویت از اشعه ماوراء بنفش بهره گرفته شد و اثر این متغیرها شامل میزان ماده معدنی و مدت زمان اعمال اشعه ماوراء بنفش بر خواص حرارتی این الیاف ارزیابی گردید. با استفاده از روش طراحی آزمایشات و تصاویر میکروسکوپ الکترونیکی و طیف سنج مادون قرمز به آنالیز نتایج پرداخته شد. نتایج نشان داد ذرات مسکوویت با ذرات پلی استر در حد کامل مخلوط شده و نانو ذرات مسکوویت در این پلیمر فیلر شده است و الیاف تولیدی از یکنواختی بالایی برخوردارند. همچنین نتایج حاصل از آزمون شعله بیانگر آن بود که حضور نانو ذرات مسکوویت در گرانول پلی استر تاثیر معنی داری بر بهبود مقاومت حرارتی الیاف حاصله دارد. نتایج آزمون کشش نیز نشان داد کاهش معنی داری درخواص مکانیکی الیاف اصلاح شده ایجاد نشده است.

    کلید واژگان: الیاف پلی استر، مقاومت حرارتی، نانو ذرات مسکوویت، تولید الیاف
    Mozhgan Salehabadi, MohammadJavad Abghary *, Ehsan Zarinabadi

    Today, efforts have been made to improve the positive properties as well as reduce the negative properties of different fibers. Meanwhile, polyester fibers, against all their advantages and desirable properties, their low thermal resistance has limited their use in various industries. Because thermal resistance is one of the most important topics in engineering sciences. In most cases, these fibers need to be modified by methods that are very broad and involve the physical and chemical modifications of polymers and fibers. Therefore, in this study, it has been tried to evaluate the improvement of thermal resistance of these fibers. For this purpose, the thermal properties of fibers were investigated by filling Muscovite mineral nanoparticles in the smelting operation on polyester chips. Ultraviolet rays were used to reduce the particle size of Muscovite and the effect of these variables including the amount of mineral and the duration of ultraviolet rays on the thermal properties of these fibers was evaluated. The results were analyzed using the design of experiments and images of electron microscope and infrared spectrometer. The results showed that the muscovite particles were thoroughly mixed with the polyester particles and the Muscovite nanoparticles were fillered in this polymer and the produced fibers have high uniformity. The results of flame test also showed that the presence of Muscovite nanoparticles in polyester granules has a significant effect on improving the thermal resistance of fibers. Also, there was no significant decrease in the mechanical properties of the modified fibers based on the tensile test.

    Keywords: Polyester fibers, thermal resistance, Muscovite nanoparticles, Fiber production
  • رضا جعفری ندوشن*، محمدجواد عبقری

    مواد آکزتیک با نسبت پواسون منفی به عنوان یکی از انواع فرامواد به دلیل خواص مکانیکی جذاب و قابل توجه، توجه بسیاری از محققین را به خود جلب کرده اند. سازه های صلب چرخنده یکی از انواع مواد آکزتیک هستند که با تنظیم متغیرها، رفتار همسانی را در جهات مختلف نشان می دهند، اما این سازه ها بدلیل استفاده از بلوک های صلب دارای چگالی نسبی زیادی می باشند. از طرفی علی رغم چگالی نسبی بالا این سازه ها در اتصالات اجزای چرخنده به یکدیگر ضعیف بوده و دارای سفتی و استحکام بالایی نیستند و با توجه به چگالی نسبی بالا خواص ویژه مکانیکی کمی دارند. در این پژوهش یک ساختار مشبک جدید با الهام از سازه های صلب چرخنده ولی با چگالی نسبی بسیار کمتر ایجاد گردید. برای کاهش چگالی نسبی در این ساختار بجای بلوک های صلب از المان های میله ای استفاده شده است. ساختار جدید با استفاده از فرآیند چاپ سه بعدی ساخته شد و تحت آزمایش کشش قرار گرفت. با عکس برداری از ساختار قبل و در حین تغییرشکل، ضریب پواسون آن اندازه گیری گردید .همچنین با روش اجزای محدود، رفتار تغییرشکل ساختار پیشنهادشده شبیه-سازی و با نتایج تجربی مقایسه شد. هر دو روش نشان دهنده رفتار آکزتیک ساختار جدید هستند. در ادامه مکانیزم تغییرشکل ساختار و همچنین محدوده ای از شکل ساختار که رفتار آکزتیک در آن مشاهده می شود بررسی گردید.

    کلید واژگان: ساختارهای آکزتیک، نسبت پواسون منفی، ساختار مشبک، چاپ سه بعدی، شبیه سازی اجزای محدود
    Reza Jafari Nedoushan *, MohammadJavad Abghary

    Auxetic materials with negative Poisson’s ratio, as a group of metamaterials, attracted significant attentions among researchers due to their interesting and remarkable mechanical properties. Rigid rotating structures are a subcategory of auxetic materials which can show the same behavior in various directions by tuning their parameters, but due to using rigid rotating blocks their relative density is high. As the rotating blocks are connected by weak joints, stiffness and strength of these structures are low and considering high relative density of these structures specific mechanical properties are even in worse condition. In this research, novel lattice structures based on rigid rotating structures but with remarkably lower relative density were presented. To reduce relative density of these structures, bar elements were used instead of rigid blocks. 3D printing method was used to manufacture samples with these structures and then tensile test was performed on the samples. Poisson’s ratios of the samples were measured by recording image of the structures before and during deformation. The behavior of the structures was predicted by finite element method and compared with experimental measurements. Both of the methods showed auxetic behavior of the structures. Then deformation mechanism of the structures and the effect of the structures shape on the auxeticity were investigated.

    Keywords: Auxetic structures, Negative Poisson&rsquo, ratio, Lattice structures, 3D printing, finite element modeling
  • پریسا ترابی، محمدجواد عبقری*، سید منصور بیدکی، عماد اولیاء

    با توجه به کاربرد گسترده پارچه ها در مصارف گوناگون و اهمیت تغییر شکل آن ها تحت نیروهای مختلف و همچنین خواص مکانیکی مورد انتظار در کاربرد نهایی، ارزیابی خصوصیاتی ازجمله تغییرشکل و کرنش سطحی پارچه از اهمیت بسزایی برخوردار است. در روش های مرسوم، کرنش پارچه توسط دستگاه استحکام سنج به صورت کلی ارایه می گردد بطوریکه تعیین کرنش هر بخش از پارچه نیازمند استفاده از دستگاه کرنش سنج بوده که در این حالت هم فقط کرنش یک بخش از پارچه قابل اندازه گیری می باشد. اما در این پژوهش به بررسی و ارزیابی تغییر شکل پارچه و تعیین کرنش بخش های مختلف از سطح پارچه های تاری پودی پلی استر/ پنبه با بافت تافته با استفاده از روش میزان همبستگی تصاویر قبل و بعد از اعمال ازدیادطول به پارچه، پرداخته شده است. با توجه به نتایج به دست آمده از میزان همبستگی بخش های مختلف پارچه می توان بیان نمود که این روش می تواند معیار مناسبی برای ارزیابی کرنش و تغییر شکل سطحی پارچه های تاری پودی باشد.

    کلید واژگان: کرنش سطحی، تغییر شکل سطحی، پارچه تاری پودی، پردازش تصویر، همبستگی تصویر
    Parisa Torabi, MohammadJavad Abghary *, S.Mansour Bidoki, Emad Owlia

    Considering the widespread use of fabrics in various uses and the importance of their deformation under different forces as well as the mechanical properties expected in the final application, it is important to evaluate the properties such as the deformation and surface strain of the fabric. In conventional methods, the strain of the fabric is provided by the strength measuring device in general, so that the determination of the strain of each part of the fabric requires the use of a strain gauge device, and in this case, only the strain of one part of the fabric can be measured. However, in this research, the change of shape of the fabric and the determination of the strain of different parts of the surface of the cotton/ polyester woven fabric with plain structure using the method of correlation of the images before and after the elongation have been discussed. According to the results obtained from the degree of correlation of different parts of the fabric, it can be said that this method can be a suitable criterion for evaluating the strain and surface deformation of woven fabrics.

    Keywords: Surface strain, surface deformation, woven fabric, image processing, image correlation
بدانید!
  • در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو می‌شود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشته‌های مختلف باشد.
  • همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته می‌توانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
  • در صورتی که می‌خواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال