sio2
در نشریات گروه فیزیک-
The preparation of Co1-xCdxFe2O4/SiO2 nanocomposites with core/ shell structure involved the coating of SiO2 using Stöber method on Co1-xCdxFe2O4 and the use of facile thermal treatment method for synthesizing nanoparticles. The effect of cadmium substitution and SiO2 coating on the degree of crystallinity, samples composition, microstructure, and phase composition were conducted by X-ray diffraction (XRD), energy dispersion X-ray analysis (EDXA), transmission electron microscopy (TEM), and fourier transform infrared spectroscopy (FT-IR), respectively. Magnetic properties were demonstrated by a vibrating sample magnetometer (VSM) which displayed that Co-Cd ferrite nanoparticles and coated silica samples exhibited magnetic behaviors. In investigating the influence of cadmium substitution and the SiO2 coating on the band gap energy (Eg), a more accurate method was used in evaluating the band gap energy (Eg). The method of evaluation is a recently proposed one known as derivation of absorption spectrum fitting (DASF) which involves the direct absorption spectra of UV-Visible region, without any need for the concentration of powders or solutions.Keywords: Nanocomposites, Magnetic properties, Ferrites, SiO2
-
در این مقاله، نانولوله کربنی عامل دار (MWCNT-COOH) با لایه هایی از پوشش زیست سازگار دی اکسید سیلیسیوم (سیلیکا) پوشش داده شد. این پوشش به دلیل دارا بودن گروه های هیدروکسیل (OH) متعدد در سطح خود، علاوه بر آنکه از تجمع نانولوله ها جلوگیری می کند، قابلیت گیراندازی و پایدار کردن نانوذرات مختلف را به طور یکنواخت و به اندازه دلخواه روی سطح خود دارد. نانولوله پوشیده با سیلیکا (MWCNT/SiO2) با درصد های مختلفی از نانوذرات مگنتیت (Fe3O4) دوپه شد. نسبت های 1، 2 و 3 برابر Fe3O4 به MWCNT/SiO2 به ترتیب S1، S2 و S3 نامیده شدند. نانوکامپوزیت های حاصل (MWCNT/SiO2/Fe3O4) توسط طیف سنجی پراش پرتو ایکس (XRD)، میکروسکوپ الکترونی روبشی (SEM) مشخصه یابی شد. خاصیت مغناطیسی نمونه ها با استفاده از مغناطش سنج نمونه ارتعاشی (VSM) بررسی شد که نشان دهنده خاصیت سوپرپارامغناطیس نانوکامپوزیت ها بود. به دلیل دارا بودن خاصیت زیست سازگاری، هر سه نمونه از نانوکامپوزیت تهیه شده به عنوان فوتوکاتالیست های قابل بازیافت (به دلیل دارا بودن خاصیت مغناطیسی) برای حذف رنگ متیلن آبی مورد استفاده قرار گرفتند.
کلید واژگان: SiO2، MWCNT، Fe3O4، خاصیت مغناطیسی، فوتوکاتالیستIn this paper, functionalized carbon nanotubes were covered with a biocompatible shell of silica (MWCNT/SiO2). Having a high amount of OH groups, silica shells avoid nanotubes agglomeration and are able to uniformly capture and stabilize arbitrary amounts of nanoparticles on their surface. MWCNT/SiO2 doped with different amounts of Fe3O4 nanoparticles. Three samples of Fe3O4/SiO2/MWCNT nanocomposites prepared by 1, 2, and 3 weight ratio of Fe3O4 to SiO2/MWCNT are labeled S1, S2, and S3, respectively. Then, they were characterized by X-ray diffraction spectroscopy (XRD) and scanning electron microscopy (SEM). The magnetic property of samples was investigated with vibrational sample magnetometer (VSM), which indicated the superparamagnetic property of nanocomposites. Due to their biocompatibility, nanocomposites were used as recyclable photocatalysts to remove methylene blue dye.
Keywords: SiO2, MWCNT, Fe3O4, magnetic property, photocatalyst -
در این مقاله برای ساخت فیبرهای توخالی SiO2 از فیبرهای پنبه استفاده کردیم. به این صورت که سوسپانسیونی از پودر SiO2 و آب دیونیزه درست کرده و مقداری از پنبه را در این سوسپانسیون خیسانده و سپس خشک می کنیم. آخرین مرحله نیز کلسینه کردن در دماهای بالا، جهت سوزاندن پنبه ها است. جهت بررسی ریخت شناسی فیبرهای توخالی تولید شده چهار آزمایش طراحی شد. در آزمایش اول سه نمونه را در 40 درجه سانتیگراد به مدت 1 ساعت خشک کرده و در دماهای مختلف 500، 600 و 700 درجه سانتیگراد و به مدت 6 ساعت کلسینه کردیم. در آزمایش دوم نمونه ها در دماهای 40، 50 و 60 درجه سانتیگراد خشک کرده و در دمای 600 درجه سانتیگراد کلسینه کردیم. در آزمایش سوم پودر SiO2 در دو زمان، 30 دقیقه و 1 ساعت را سائیده، در 50 درجه سانتیگراد خشک و در دمای 600 سانتیگراد کلسینه کردیم. در آزمایش چهارم نسبت های وزنی بین پودر SiO2 و آب دیونیزه را تغییر داده، در 50 درجه سانتیگراد خشک و در دمای 600 سانتیگراد کلسینه کردیم. بررسی ریخت شناسی فیبرهای ساخته شده، نشان می دهد نمونه ای که سوسپانسیون آن در نسبت وزنی 1:100 تهیه شده، در دمای 50 درجه سانتیگراد خشک شده و در دمای 600 درجه سانتیگراد کلسینه شده است، نمونه بهینه است. فیبرهایی که به این روش آماده شدند، ساختار پنبه را حفظ کرده و از تخلخل و مساحت سطحی نسبتا بالایی برخوردار هستند. در شرائط بهینه، فیبرهای توخالی به طول در حدود 30 میکرومتر، قطر 3 میکرومتر و ضخامت دیواره nm 300 می باشند. در انتها در سوسپانسیون به جای آب دیونیزه با الکل استفاده شد. نتایج ما به خوبی نشان می دهد که الکل (به عنوان حلال) به جدا کردن فیبرهای پنبه بیشتر کمک می کند و فیبرهای توخالی ساخته شده حتی به طول چندین سانتیمتر، قطر m μ 5/3 و ضخامت دیواره nm 200 هم می رسند و در بعضی از فیبرها پیچ خوردگی های که به طور طبیعی در فیبرهای پنبه وجود دارد نیز، دیده می شوند.
کلید واژگان: فیبرهای توخالی، پنبه، SiO2، سوسپانسیون، کلسینهIn this paper، we have used cotton template for fabrication of SiO2 hollow fibers. At first a suspension of SiO2 powder with DI water is prepared and some pieces of cotton inserted to the suspension to get wet and then are dried. At final step، samples are calcinated in high temperatures to burn cotton. For morphology study of hollow fibers، four different experiments have been designed. In first experiment، three samples are dried at 40 0C for 1 h and finally calcinated at 500، 600 and 700 0C for 6 h. In second experiment، samples are dried at 40، 50 and 60 0C and finally calcinated at 600 0C. In third experiment، the SiO2 powder have grinded in two times، 1 h and 30 min and dried at 50 0C and calcinated at 600 0C. In forth experiment، the weight ratio of SiO2 powder and DI water is changed and dried at 50 0C and calcinated at 600 0C. Study of morphology of fabricated samples showed that a sample which is prepared with weight ratio of 1:100، dried at 50 0C، and calcinated at 600 0C is optimum sample. Fibers which are prepared by this method keep the structure of cotton and have high porosity and surface area. At optimum conditions; hollow fibers with 30 μm length، 3 μm diameter، and 300 nm tube thickness is obtained. Finally، the suspension is made with alcohol instead of DI water. Our results showed that alcohol helps to separate the cotton fibers and fabricated hollow fibers is obtained even with several centimeters length، 3. 5 μm diameter، and 200 nm tube thickness and some fibers are seen twist which exist naturally in the cotton fibers.Keywords: Hollow fibers, Cotton, SiO2, Suspension, Calcination
- نتایج بر اساس تاریخ انتشار مرتب شدهاند.
- کلیدواژه مورد نظر شما تنها در فیلد کلیدواژگان مقالات جستجو شدهاست. به منظور حذف نتایج غیر مرتبط، جستجو تنها در مقالات مجلاتی انجام شده که با مجله ماخذ هم موضوع هستند.
- در صورتی که میخواهید جستجو را در همه موضوعات و با شرایط دیگر تکرار کنید به صفحه جستجوی پیشرفته مجلات مراجعه کنید.