به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
جستجوی مقالات مرتبط با کلیدواژه

numerical algorithm

در نشریات گروه فنی و مهندسی
تکرار جستجوی کلیدواژه numerical algorithm در مقالات مجلات علمی
  • شاهد عابدی، حسن خالقی*، رضا مداحیان
    مرسوم ترین روش شبیه سازی اسپری مایع در بستر گاز، رویکرد اویلر لاگرانژ است که در آن فاز گاز با روش اویلری و فاز مایع با روش لاگرانژی ره گیری می شود. در رژیم جریان متراکم، تاثیر فاز مایع روی فاز گاز و همچنین تاثیر قطرات بر روی یکدیگر دارای اهمیت است و منجر به وابستگی شدید معادلات فاز گاز و مایع می شود. ازنظر عددی حل وابستگی این معادلات از چالش های اصلی این روش است. در پژوهش حاضر دو رویکرد مختلف در ساختار الگوریتم سیمپل برای حل معادلات ارایه شده است. بنابراین یک برنامه کامپیوتری با زبان فرترن برای حل معادلات با رویکرد اویلر لاگرانژ توسعه داده شد. برای اعتبارسنجی و ارزیابی رویکردهای ارایه شده، مسیله اسپری سوخت دیزل حل گردید و با مقایسه نتایج تجربی و در نظر گرفتن زمان همگرایی، الگوریتم مناسب انتخاب شد. نتایج نشان داد استفاده از یک مرحله حل تقریبی معادلات فاز لاگرانژ در آغاز حلقه تکرار الگوریتم سیمپل و سپس دو مرحله تصحیح در موقعیت مناسب در داخل الگوریتم سیمپل، الگوی مناسبی برای حل پیوند چهار راهه معادلات در رویکرد اویلر لاگرانژ است.
    کلید واژگان: جریان دوفازی، اویلر لاگرانژ، شبیه سازی عددی، اسپری دیزل، الگوریتم حل عددی
    Sh. Abedi, H. Khaleghi *, R. Maddahian
    The most common method of simulating liquid spray in a gaseous environment is the Eulerian Lagrangian approach where the gas phase is solved by the Euler method and the liquid phase by the Lagrange method. In the dense regime, the effect of the liquid phase on the gas phase and also the effect of the droplets on each other are of great importance. Due to the strong coupling between the gas phase and liquid phase, numerical solution of these equations is one of the main challenges of this approach. In this study, two SIMPLE based algorithms for solving these equations are presented. To do this task, a Lagrangian-Eulerian computer code was developed for the two-phase flow equations. To evaluate the proposed approaches, the diesel fuel spray was solved and by comparing results, the appropriate algorithm was selected. The results showed solving the liquid phase equations at the beginning of the SIMPLE iteration loop and then making two corrections in the appropriate position inside the algorithm, provides a suitable method for solving governing equations of the spray with the assumption of four-way coupling in the Eulerian-Lagrangian approach.
    Keywords: Two phase flow, Euler-Lagrange, Numerical Simulation, Diesel Spray, Numerical Algorithm
  • مهدی گنجیانی*، هادی مهدی پور
    در پژوهش حاضر، برای تحلیل رفتار پلیمرهای نیمه بلوری، با استفاده از دیدگاه مکانیک آسیب محیط پیوسته، یک مدل مکانیکی ارائه شده است. در این مدل، یک نقطه مادی از پلیمر نیمه بلوری به صورت مجموعی از توده ها، شامل دو فاز بلوری و بی شکل و صفحه ی مرزی فازها درنظر گرفته شده و معادلات اساسی هر یک از فازها تشریح شده است. سپس الگوریتمی عددی برای حل معادلات اساسی هر فاز به صورت مرحله به مرحله ارائه شده است. همچنین با استفاده از میانگین گیری حجمی، رفتار کلی ماده برحسب رفتار هرکدام از فازها مشخص گردیده است. به دلیل در دسترس بودن پارامترهای مادی برای پلی اتیلن، رفتار این ماده مورد تحلیل قرار گرفته است. نتایج عددی بدست آمده با نتایج مدل ها و آزمایشات قبلی مقایسه شده است، پس از تایید اعتبار مدل ارائه شده، تاثیر پارامترهای نرخ آسیب فاز بلوری، پارامتر رهایی، نرخ آسیب فاز بی شکل، آسیب اشباع، مدول برشی لاستیکی و مقاومت فاز بی شکل بر رفتار پلی اتیلن مورد بررسی قرار گرفته است.
    کلید واژگان: مکانیک آسیب محیط پیوسته، پلیمر نیمه بلوری، الگوریتم عددی، پلی اتیلن
    Mahdi Ganjiani *, Hadi Mehdipour
    In the current study, semi-crystalline polymers and their properties are introduced, and then a mechanical model is precisely presented in order to predict the behavior of these materials. In this model, a material point of the semi-crystalline polymer is considered as an aggregate of inclusions of two phases, namely, the crystalline and the amorphous phase, with the interface plane of these two phases. Constitutive equations of each phase are demonstrated. A numerical algorithm is presented for solving the constitutive equations of each phase, in stages. Moreover, the general behavior of the material is determined in terms of each phase behavior using volume averaging. Because of the availability of the material parameters for polyethylene, this material has been taken into account. Obtained numerical results are reported and compared to that of previous models. After supporting the validity of the presented model, the effect of some material parameters including crystalline phase damage rate, release parameter, amorphous phase damage rate, saturation damage, rubber shear modulus, and amorphous phase strength on polyethylene behavior has been discussed in details.
    Keywords: Continuum Damage Mechanics, Semi-crystalline polymers, Numerical algorithm, Polyethylene
  • مازیار دهقان، مصطفی میرزایی، محمدصادق ولی پور، سیف الله سعدالدین
    جریان لایه ای برای یک سیال غیر نیوتنی تراکم ناپذیر ساکن بر روی یک صفحه کشسان متحرک در حالت ناپایا بررسی و متغیر تشابهی و متعاقب آن معادله حاکم بر جریان در دستگاه تشابهی، ارائه شده است. برای مدلسازی سیال غیر نیوتنی، از مدل قانون توانی استفاده شده است. سرعت صفحه کشسان تابعی از زمان و طول صفحه در نظر گرفته شده است. به کمک متغیر تشابهی ارائه شده، سه متغیر مستقل دستگاه فیزیکی (t،x،y) به تنها یک متغیر مستقل (η) تبدیل یافته است. به کمک تبدیل تشابهی، سیستم دستگاه معادلات پاره ای حاکم در دستگاه فیزیکی به یک معادله دیفرانسیل معمولی غیر خطی در دستگاه تشابهی تبدیل و سپس توسط الگوریتم ارائه شده توسط نویسندگان مطالعه حاضر بر مبنای روش تفاضل محدود، حل گردیده است. در روش حل ارائه شده بر مبنای متغیر تشابهی پیشنهادی، نیازی به در نظر گرفتن تغییرات سه متغیر مستقل دستگاه فیزیکی نمی باشد و به کمک یک متغیر مستقل تشابهی می توان همزمان تغییرات تمامی متغیر های مستقل را در نظر گرفت که از پیچیدگی حل بسیار کاسته می-شود. برای دیدن نتایج این روش حل، اثرات پارامتر های سیال و جریان بر میدان سرعت در لایه مرزی بررسی شده است.
    کلید واژگان: صفحه کشسان
    Dr Mohammad Sadegh Valipour
    Laminar flow of a non-Newtonian fluid over a moving flat solid boundary has been investigated. The power-law model was used for describing the non-Newtonian behavior of the fluid. The fluid was stationary at free stream and the motion of the solid boundary imposed the fluid to flow. Velocity of the solid boundary varied linearly along its length which is called stretching sheet. Also, the velocity of this boundary increased in time as a hyperbolic function. A new similarity variable for this type of transient motion of the stretching sheet based on the non-Newtonian behavior of the fluid has been proposed. This similarity variable transforms three independent variable (t,x,y) into an independent variable (η). By the use of this transformation, the governing partial differential equations of mass and momentum conservations were transformed into a single non-linear ordinary differential equation. Also, a numerical algorithm based on the finite difference method was proposed to solve the obtained non-linear differential equation. The proposed similarity variable reduced the complexity of the flow simulation and it represented all the three independent variables of the physical phenomenon at the same time. To see the results of the similarity transformation and the numeric algorithm, effects of the fluid and flow characteristics on the hydrodynamic behavior of the flow have been investigated.
    Keywords: stretching sheet, un, steady flow, non, Newtonian fluid, similarity transformation, numerical algorithm
نکته
  • نتایج بر اساس تاریخ انتشار مرتب شده‌اند.
  • کلیدواژه مورد نظر شما تنها در فیلد کلیدواژگان مقالات جستجو شده‌است. به منظور حذف نتایج غیر مرتبط، جستجو تنها در مقالات مجلاتی انجام شده که با مجله ماخذ هم موضوع هستند.
  • در صورتی که می‌خواهید جستجو را در همه موضوعات و با شرایط دیگر تکرار کنید به صفحه جستجوی پیشرفته مجلات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال