Robust Model Predictive Control for Satellite Orbit Maintenance Using Hall Effect Thrusters
Author(s):
Article Type:
Research/Original Article (دارای رتبه معتبر)
Abstract:
In this article, a robust model predictive controller is designed for maintaining the satellite's low earth orbit in the presence of perturbations and uncertainties. The designed control system makes it possible for the satellite to automatically keep the orbital parameters within the allowed range without intervention of the ground station. For this purpose, Hall effect thrusters, which are among the electric thrusters with small size, have been used, and the output of the controller is implemented by continuously commanding these thrusters instead of the traditional impulsive thrust generation algorithms. Based on this, it is possible to modify all orbital parameters simultaneously. In the presented solution, the gain of the controller is calculated online by solving an optimization problem whose objective is to minimize the orbit maintenance error and also the fuel consumption. Also, the optimization problem based on linear matrix inequalities has been developed to ensure the stability of the closed loop system and to be robust against orbital perturbations and unknown parametric uncertainties. Finally, numerical simulations show the effectiveness of the proposed control scheme and the high efficiency of the closed loop system despite uncertainties and perturbations.
Keywords:
Language:
Persian
Published:
Journal of Technology in Aerospace Engineering, Volume:8 Issue: 4, 2024
Pages:
27 to 37
https://www.magiran.com/p2724861
سامانه نویسندگان
مقالات دیگری از این نویسنده (گان)
-
Design of an Adaptive Fuzzy Controller with Terminal Sliding Mode for a Gravity-Compensated Active Suspension System Used in the Space Mechanism Laboratory
*, Gholamreza Hashemi
Aerospace Mechanics Journal, -
Manufacturing of composite material with Acrylonitrile Butadiene Styrene matrix and woven glass fibers and investigation of its mixed-mode I/II fracture toughness using improved fixture
Elyas Haddadi *,
Iranian Journal of Manufacturing Engineering,