به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
جستجوی مقالات مرتبط با کلیدواژه

coda normalization method

در نشریات گروه زمین شناسی
تکرار جستجوی کلیدواژه coda normalization method در نشریات گروه علوم پایه
تکرار جستجوی کلیدواژه coda normalization method در مقالات مجلات علمی
  • ندا رحیمی، عباس غلام زاده*
    علم زلزله شناسی به کمک مطالعه نگاشت های ثبت شده حاصل از امواج زمین لرزه، نقش مهمی در شناسایی وضعیت و ترکیبات داخل زمین که امواج لرزه ای از داخل آن عبور می کنند، ایفا می کند. انرژی امواج لرزه ای در هنگام عبور از زمین با افزایش مسافت بین چشمه و گیرنده کاهش می یابد. کاهندگی امواج لرزه ای در لیتوسفر به عنوان یکی از ویژگی های مهم جهت مطالعه ساختار داخل زمین و یکی از راه های شناسایی ویژگی های لرزه خیزی و ارتباط آن با تکتونیک در یک منطقه شناخته می شود. تعیین ضریب کیفیت در درون زمین با مطالعه کاهندگی امواج لرزه ای امکان پذیر است. می توان کاهندگی لرزه ای را به صورت افت دامنه امواج لرزه ای نسبت به زمان و فاصله توصیف کرد. به طور کلی دامنه موج لرزه ای با افزایش فاصله درون زمین کاهش می یابد. به جز مواردی که تداخل امواج رخ می دهد، دامنه نسبت به فاصله به طور نمایی کاهش می یابد و مقدار افت آن متناسب با Qp-1 است که مشخصه مکانی موج P است. گستره مورد مطالعه، جزیره قشم با طول متوسط 132 کیلومتر و عرض متوسط 4/11 کیلومتر است که در بخش خاوری رشته کوه زاگرس قرار گرفته است. زمین‏لرزه قشم با بزرگای 0/6 = mb در ششم آذرماه 1384 در ساعت 10:22:19 (UTC) در مختصات جغرافیایی 83/26 درجه عرض شمالی و 82/55 درجه طول شرقی توسط 17 ایستگاه شبکه ملی لرزه نگاری پژوهشگاه بین المللی زلزله شناسی و مهندسی زلزله به ثبت رسید. در این مطالعه جهت برآورد رابطه وابستگی فرکانسی ضریب کیفیت امواج P به روش نرمالایز کدا، از 661 پس‏لرزه به دقت تعیین محل شده، استفاده شده است. در این روش ضریب کیفیت امواج طولی در 9 بازه فرکانسی، 5/1- 5/2- 5/3-5 – 7 – 10 – 14 – 19 -24 هرتز در منطقه قشم تعیین شدند. رابطه وابستگی فرکانسی به دست آمده برای امواج طولی در منطقه مورد مطالعه به صورت است. به این ترتیب کاهندگی منطقه قشم به نسبت بسیار زیاد است که می تواند دلالت بر این داشته باشد که مواد تشکیل‏دهنده پوسته زمین بخش زیادی از انرژی امواج تراکمی را مستهلک می کنند. این کاهندگی زیاد، با توجه به مقادیر گزارش شده برای سایر نقاط ایران و جهان، بازتابی از حضور یک لایه رسوبات نسبتا نرم هم چون گنبدهای نمکی است؛ همچنین می تواند به دلیل داده های استفاده شده پس لرزه های زمین لرزه 6 آذرماه باشد که منطقه دچار خردشدگی و بالتبع افزایش ناهمگنی شده است. مقدار ضریب کیفیت در بسامد مرجع 0/1 هرتز کمتر از 200 است. بنابراین می توان نتیجه گرفت این منطقه از لحاظ لرزه خیزی و زمین ساختی فعال است. نتایج با خصوصیات زمین شناسی و ساختار رسوبی منطقه مطابقت دارد؛ در این بخش از زاگرس تجمع گنبدهای نمکی به وفور یافت می شود.
    کلید واژگان: امواج P، روش نرمالایز کدا، قشم
    Neda Rahimi, Abbas Gholamzadeh *
    Seismology has an important role in identifying earth structure by studying seismic waves. The amplitude and frequency of these waves change when they pass into the earth due to various parameters including anisotropy and heterogeneity. Seismic waves decay as they radiate away from their sources, partly for geometric reasons because their energy is distributed on an expanding wave front, and partly because their energy is absorbed by the material they travel through. The energy absorption depends on the material properties.
    The amplitude of seismic waves decreases with increasing distance from earthquake, explosion, and impact sources. How this amplitude decrease occurs and how rapidly it occurs and how it depends on the frequency of the seismic waves is fundamentally important to the efforts to describe Earth structure and seismic sources.
    Attenuation of seismic waves is expressed with inverse quality factor (Q-1) and helps understand the physical laws governing the propagation of seismic waves in the lithosphere.
    The observed seismic-wave amplitudes usually decay exponentially with increasing traveled distance after the correction for geometrical spreading, and decay rates is proportional to Q−1 which characterizes the spatial attenuation for P-wave.
    An earthquake with magnitude Mw 5.8 occurred on Qeshm Island, on the western edge of the Strait of Hormuz in SE Zagros, on November 27, 2005. From 2005 December 2 to 2006 February 26, a dense seismological network of 17 stations was installed in the epicentral region of the 2005 November 27 Qeshm sequence.
    In this study, 661 aftershocks were selected to estimate the frequency dependence relationship of the quality factor of P-wave with coda normalization method. The coda normalization method was used for the estimation of the quality factor of the longitudinal waves at 9 frequency band (the central frequency: 1.5, 2.5, 3.5, 5, 7, 10, 14, 19, 24). The frequency dependence relationship for the longitudinal waves are Qp = 0.059f -0.94 in the study area. As reported from other parts of world and Iran, the high value of attenuation in Qeshm may be because of the presence of some soft sediments such as a salt dome. Another reason for this high attenuation, probably due to using aftershocks data. After main shocks occurred, the medium must smash and cracked, and as a result, more heterogeneity and consequently, attenuation increase. The quality factor at a reference frequency of 1.0 Hz is less than 200. Therefore, it can be concluded the area is very active in terms of tectonic plates and seismicity which represents the accumulation of salt domes in this part of Zagros.
    Keywords: P-waves, attenuation, coda normalization method, Qeshm
  • مهدی راستگو، حسین حمزه لو، مهدی رضاپور، حبیب رحیمی
    برآورد کاهیدگی امواج زمین لرزه در تحقیقات زلزله شناسی مهندسی مانند شبیه سازی جنبش نیرومند زمین، برآورد خطر زمین لرزه، تعیین روابط کاهیدگی و نیز در دیگر تحقیقات زلزله شناسی مانند بررسی تغییرات حرارتی درون زمین، حائز اهمیت است. پژوهش های بسیاری برای برآورد کاهیدگی امواج حجمی و کدا در مناطق گوناگونی از جهان ازسوی تعدادی از محققان صورت گرفته است. کاهیدگی امواج زمین لرزه ای که به دلیل فرایندهای پراکنش (Scattering) و جذب ذاتی (Intrinsic Absorption) صورت می پذیرد، با لرزه خیزی و پیچیدگی های زمین ساختی هر منطقه در ارتباط است و به صورت عکس ضریب کیفیت بیان می شود. روش های گوناگونی برای برآورد ضریب کیفیت امواج P، S و کدای زمین لرزه های محلی وجود دارد. ناحیه مورد بررسی در این پژوهش، منطقه هرمزگان در جنوب ایران است که در منتهی الیه جنوب شرقی زاگرس قرار دارد. در این تحقیق، ضریب کیفیت امواج مستقیم S به روش نرمال سازی کدا و نیز ضریب کیفیت امواج کدای S به روش تک پراکنش به عقب، در هفت باند بسامدی 0/2-0/1، 0/4-0/2، 0/6-0/3، 0/8-0/4، 0/12-0/6، 0/16-0/8 و 0/24-0/12 هرتز با بسامد های مرکزی 5/1، 0/3، 5/4، 0/6، 0/9، 0/12 و 0/18 هرتز در ناحیه هرمزگان برآورد شده است. طبق نتایج به دست آمده، رابطه وابستگی بسامدی امواج مستقیم S برای مولفه افقی شمالی-جنوبی (N-S) به صورت و برای مولفه افقی شرقی-غربی (E-W) به صورت است. همچنین، رابطه وابستگی بسامدی به دست آمده برای امواج کدا از روی مولفه قائم (U-D) به صورت به ازای پنجره گذشت زمانی 20 ثانیه تا به ازای 60 ثانیه تغییر می کند. در همه روابط به دست آمده، مقدار ضریب کیفیت در بسامد مرجع 0/1 هرتز، کمتر از 200 است. این امر نشان دهنده آن است که ناحیه مورد بررسی علاوه بر اینکه از نظر زمین ساختی و لرزه خیزی کاملا فعال است، دارای کاهیدگی و ناهمگنی زیادی نیز هست. نتایج به دست آمده با ساختار رسوبی و وجود گنبدهای نمکی در ناحیه هرمزگان مطابقت دارد. رابطه وابستگی بسامدی ضریب کیفیت امواج برشی به روش نرمال سازی کدا در ناحیه هرمزگان همانند روابط به دست آمده برای نواحی اردبیل و آوج در شمال غرب ایران و مشابه برخی مناطق جهان مانند ناحیه تنگه مسینا در جنوب ایتالیا است. همچنین، روابط وابستگی بسامدی ضریب کیفیت امواج کدا به روش تک پراکنش به عقب برآورد شده در ناحیه هرمزگان با روابط به دست آمده برای زاگرس و البرز مطابقت دارد و مشابه برخی مناطق جهان ازجمله ناحیه شمال غرب هیمالیا است. همه این مناطق از نظر زمین ساختی و لرزه خیزی فعال هستند.
    کلید واژگان: امواج برشی و کدا، روش تک پراکنش به عقب، روش نرمال سازی کدا، ضریب کیفیت، ناحیه هرمزگان
    Mehdi Rastgoo, Hossein Hamzehloo, Mehdi Rezapour, Habib Rahimi
    The attenuation of seismic waves is one of the basic physical parameters used in seismological studies and earthquake engineering, and is closely related to the seismicity and regional tectonic activity of a particular area. Seismic wave attenuation is caused by two major factors: scattering at heterogeneities in the earth and intrinsic absorption by anelasticity of the earth. The inverse of quality factor represents the attenuation. There are different methods for estimating the quality factor of Shear and Coda waves. In this study, the quality factors of Shear waves (QS) and Coda waves (QC) have been estimated in the Hormuzgan regionin the south of Iran. This region is located in the southeastern Zagros seismotectonic region. Several faults exist in this region, including the Main Zagros Reverse Fault (MZRF), High Zagros Fault (HZF), Zagros Foredeep Fault (ZFF), Mountain Front Fault (MFF) and Minab Fault. Recordings from the Bandar-Abbas (BNDS) station (located in the Hormuzgan region, 27.40º N_56.17º E) of the Iranian National Seismic Network (INSN) of local earthquakes with signal-to-noise ratios greater than 3were used for this study. These events were recorded from June 2004 through August 2009 and registered magnitudes of between 2.5 and 5.1 (ML), epicentral distances of less than 100 km and average focal depths of about 15 km. In this study, the Coda Normalization Method (Aki, 1980) and the Single Back-Scattering Method (Aki & Chouet, 1975) are used for the estimation of QS and QC at the seven central frequencies of 1.5, 3.0, 4.5, 6.0, 9.0, 12.0 and 18.0 Hz. The Shear waves on 183 North-South (N-S) components and 142 East-West (E-W) components, and the Coda waves on 200 Vertical (U-D) components, have been analyzed to estimate QS and QC, respectively. Time windows of the Shear waves were determined by the Kinoshita algorithm and the velocity of the Shear waves was estimated at 3.5 km/s. The estimated frequency-dependent relationships of QS on N-S and E-W components are and, respectively. The QC values were computed at five lapse time windows (20, 30, 40, 50 and 60 sec), starting at double the time of the primary Shear wave from the time of origin. The frequency-dependent relationships of QC vary from at 20 sec to at 60 sec lapse time window. The results show an increase in QC value with increasing lapse time windows. The estimated QC at a greater lapse time window indicates attenuation at a greater depth. In the Hormuzgan region, the values of Q at 1.0 Hz are less than 200 for the frequency-dependent relationships of QS and QC. Therefore, the Hormuzgan region is a highly tectonically and seismically active region; also, the medium is highly heterogeneous. The results reflect sedimentary deposits and salt domes in the Hormuzgan region. The QS frequency-dependent relationship in the Hormuzgan region is similar to that of the Ardabil and Avaj regions in northwestern Iran, and of the Strait of Messina in the south of Italy. Moreover, the QC frequency-dependent relationship in the Hormuzgan region is similar to that of the Alborz and Zagros regions in Iran and in the northwest of the Himalayan region. These regions are all tectonically and seismically active.
    Keywords: Coda normalization method, Hormuzgan region, shear, Coda waves, single back-scattering method, quality factor
نکته
  • نتایج بر اساس تاریخ انتشار مرتب شده‌اند.
  • کلیدواژه مورد نظر شما تنها در فیلد کلیدواژگان مقالات جستجو شده‌است. به منظور حذف نتایج غیر مرتبط، جستجو تنها در مقالات مجلاتی انجام شده که با مجله ماخذ هم موضوع هستند.
  • در صورتی که می‌خواهید جستجو را در همه موضوعات و با شرایط دیگر تکرار کنید به صفحه جستجوی پیشرفته مجلات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال