An Experimental Study of the Steel Cylinder Quenching in Water-based Nanofluids
In this study, some parameters such as quenching and boiling curves of a stainless steel cylindrical rod 80 mm long and having a diameter of 15 mm were experimentally obtained in saturate pure water and two nanofluids (SiO2 and TiO2) with 0.01 wt%. The cylinder was vertically lowered into the pool of saturated water and its temporal center temperature was measured by a thermocouple. The boiling curves were then obtained by solving a transient one-dimensional inverse heat conduction model and measuring the temperature at the center of the cylinder. The images of the surface morphology and uniformity of the deposited SiO2 and TiO2 nano particles were captured by the scanning electron microscope (SEM). The cooling time during quenching of the cylinder was decreased about 50% by nanoparticles deposition. However, the SiO2 and TiO2 nano particle deposition have similar critical heat flux increment (up to 120%). Film boiling heat transfer rate increased by repetitive quenching in SiO2 nanofluid.
Article Type:
Research/Original Article
International Journal of Engineering, Volume:33 Issue:1, 2020
28 - 33  
روش‌های دسترسی به متن این مطلب
اشتراک شخصی
در سایت عضو شوید و هزینه اشتراک یک‌ساله سایت به مبلغ 300,000ريال را پرداخت کنید. همزمان با برقراری دوره اشتراک بسته دانلود 100 مطلب نیز برای شما فعال خواهد شد!
اشتراک سازمانی
به کتابخانه دانشگاه یا محل کار خود پیشنهاد کنید تا اشتراک سازمانی این پایگاه را برای دسترسی همه کاربران به متن مطالب خریداری نمایند!