Study strength and usage of Artificial stone made with different resins and additives

Artificial stone is a mixture of natural aggregate and additives such as industrial gums (resin), cement and other polymer materials. In this research, artificial stone with additives and two resins (vinyl ester and polyester resin) in order to determine the strength and type of use, mixing plan, 84% rock, 10% resin and 6% additive completely manually without the need Vacuum and pressure system was built. Artificial rocks made with additives (glass fiber, carbon fiber, plastic), and three granite granite stones (Alamut, Sefid Tekab and Nehbandan) are used to determine the physical and engineering characteristics (Brazilian Test, Point Load Test, Uniaxial Compression Test and Ultra Sonic Test) have been tested. Based on experiments, artificial stones made of precious stones, a resin of wilin ester, glass fibers, have the highest compressive strength of single axis and borehole. However, carbon-fiber samples have a tensile strength of 28% compared to glass fiber-reinforced glass samples. The samples made with plastic have the least porosity between the samples of synthetic stones. According to the above results, in environments affected by pressures, high-strength reinforced rocks (glass-fibered samples), in tensile-induced environments; high tensile strength artificial rocks (samples made With carbon fiber) and on sidewalks made of synthetic stones made of plastic due to low porosity.