Height effect on shear strength of deep beams without Shear Reinforcement with normal and lightweight concrete
One of major parameters in determining shear capacity of beams is the height of beam. Researches show that with increase in beam’s height, normalized shear strength decreases which this phenomena is called size effect. In recent years due to advances in construction methods, the idea of using lightweight concrete deep beams has been proposed, this should be done with a full understanding of the behavior of lightweight concrete. Moreover, truss models are recently used for analysis and design of deep beams in codes which their validity for lightweight concrete should be investigated.In this research to investigating size effect in lightweight concrete deep beams and comparison with normal concrete, two series of beams including 8 deep beam with shear span to height ratio of 0.5 were built in lab. First series included 4 beams with height of 30, 45, 60 and 90 cm using lightweight concrete in their construction, specimens of second series were similar to first but normal concrete was used in there construction. Results show that normalized shear strength in both groups of beams decreases with increase in height but the intensity of this decrease in lightweight concrete deep beams is more than normal concrete which shows that size effect in lightweight concrete is more than normal concrete. Results of Experiment were compared to truss methods in codes and some of proposed models in codes. Results indicate that all methods are conservative in low height beams and with increase in height, safety margin decreases.
- حق عضویت دریافتی صرف حمایت از نشریات عضو و نگهداری، تکمیل و توسعه مگیران میشود.
- پرداخت حق اشتراک و دانلود مقالات اجازه بازنشر آن در سایر رسانههای چاپی و دیجیتال را به کاربر نمیدهد.