Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite
Author(s):
Article Type:
Research/Original Article (دارای رتبه معتبر)
Abstract:
Owing to their high strength-to-weight ratio, aluminum-ceramic composites, are widely used in various industries. In this study, aluminum matrix composite was fabricated with only 2 wt% micron-sized SiC particles as the reinforcing phase using electromagnetic stir casting. Prior to mixing, the surface of SiC particles were chemically etched by HF, NaOH, and KOH at two heat treatment temperatures of 460 and 510 °C for 30 min. The obtained results indicated better wettability and interaction between the etched SiC particles and Al matrix. In addition, etched SiC particle as a ceramic phase at 460 °C enhanced the mechanical properties of Al as a metal matrix, such as enhancing hardness and E about of 6.6 and 26.6%, respectively, mainly due to the increasing inhibition against movement of dislocation confirmed by the observed brittle behavior of fracture surface.
Keywords:
Language:
English
Published:
Advanced Ceramics Progress, Volume:7 Issue: 2, Spring 2021
Pages:
10 to 15
https://www.magiran.com/p2341565
سامانه نویسندگان
مقالات دیگری از این نویسنده (گان)
-
Enhancing the biocompatibility of neural implants by applying advanced ceramic coatings containing protein
Ali Shanaghi*, , Hanieh Shahriyari
Journal of Iranian Ceramic Society, Spring 2025 -
Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer
Ali Shanaghi, AliReza Souri, Wrya Forghani
Advanced Ceramics Progress, Spring 2023