Application of lock-in shearography in non-destructive testing of planar defects
Author(s):
Article Type:
Research/Original Article (دارای رتبه معتبر)
Abstract:
Digital shearography, as a non-destructive testing method is based on laser interferometry, which detects defects by measuring the mechanical response of the specimen to the external loading. In this study, thermal loading was applied in an alternating way to the conventional shearography method in order to investigate its effect on the defects ascertainability in different sizes and depths. A total of 15 lock-in shearography tests with different modulation frequency and loading cycle were carried out on a polymer specimen with 9 planar defects in different sizes and depths and the results were compared with conventional shearography. In the conventional method, only 4 out of 9 defect areas were detected in the specimen, while by applying lock-in stimulation with a modulation frequency of 0.02 Hz, all of 9 defect areas were revealed. The results showed that increasing the number of loading cycles does not have a significant effect on the detection capacity of defects. Also, detection of deeper defects requires the implementation of lower modulation frequencies, and defects detectability is improved with decreasing modulation frequency, so that the mean phase difference increases 2.1 times by reducing the modulation frequency from 0.1 to 0.02 Hz.
Keywords:
Language:
Persian
Published:
Iranian Journal of Manufacturing Engineering, Volume:9 Issue: 1, 2022
Pages:
1 to 9
https://www.magiran.com/p2479854
سامانه نویسندگان
از نویسنده(گان) این مقاله دعوت میکنیم در سایت ثبتنام کرده و این مقاله را به فهرست مقالات رزومه خود پیوست کنند.
راهنما
مقالات دیگری از این نویسنده (گان)
-
Non-destructive Testing of Planar Defects Using Shearography Method with Modulated Ultrasonic Excitation
, Davood Akbari *
Iranian socciety for nondestructive testing, -
Non-destructive measurement of internal defects using shear laser interferometry method
, Davood Akbari *, Navid Saberi Nasrabad
Iranian Journal of Manufacturing Engineering,